Form 10-K
Table of Contents

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

 

FORM 10-K

 

 

(Mark One)

þ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2011

or

 

¨ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from             to            .

Commission File Number 001-33092

 

 

LEMAITRE VASCULAR, INC.

(Exact name of registrant as specified in its charter)

 

 

 

Delaware   04-2825458
(State or other jurisdiction of incorporation or organization)   (I.R.S. Employer Identification No.)
63 Second Avenue, Burlington, Massachusetts   01803
(Address of principal executive offices)   (Zip Code)

Registrant’s telephone number, including area code 781-221-2266

 

 

Securities registered under Section 12(b) of the Act:

 

Title of each class

 

Name of each exchange on which registered

Common Stock, $0.01 par value per share   The NASDAQ Stock Market LLC

Securities registered under Section 12(g) of the Act: None

 

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes:  ¨    No:  þ

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes:  ¨    No:  þ

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes:  þ    No:  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).     Yes  þ    No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form10-K or any amendment to this Form 10-K.    ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule12b-2 of the Exchange Act.

Large accelerated filer  ¨        Accelerated filer  ¨         Non-accelerated filer  ¨ (Do not check if a small reporting company)        Smaller reporting company  þ

Indicate by check mark whether the registrant is a shell company (as defined in Rule12b-2 of the Act).     Yes:  ¨    No:  þ

The aggregate market value of the voting and non-voting common stock held by non-affiliates of the registrant, based on the last sale price for such stock on June 30, 2011: $59,273,098. The number of shares held by stockholders whose ownership exceeds 5% of the registrant’s common stock outstanding at June 30, 2011 is based on Schedules 13D and 13G filed by such stockholders for the year ended December 31, 2011 and subsequent reports, if any, filed by such stockholders pursuant to Section 16 of the Securities Exchange Act of 1934, as amended. Exclusion of such shares should not be construed to indicate that any such person possesses the power, direct or indirect, to direct or cause the direction of the management or policies of the registrant or that such person is controlled by or under common control with the registrant. At March 21, 2012, the registrant had 15,240,766 shares of common stock, par value $0.01 per share, outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

Part III of this Form 10-K incorporates information by reference from the registrant’s definitive proxy statement to be filed with the Securities and Exchange Commission within 120 days after the close of the fiscal year covered by this annual report.

 

 

 


Table of Contents

LEMAITRE VASCULAR

2011 FORM 10-K ANNUAL REPORT

TABLE OF CONTENTS

 

PART I

  

Item 1.

  

Business

     1   

Item 1A.

  

Risk Factors

     17   

Item 1B.

  

Unresolved Staff Comments

     39   

Item 2.

  

Properties

     39   

Item 3.

  

Legal Proceedings

     39   

Item 4.

  

Mine Safety Disclosures

     39   

PART II

     

Item 5.

  

Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

     40   

Item 6.

  

Selected Financial Data

     43   

Item 7.

  

Management’s Discussion and Analysis of Financial Condition and Results of Operations

     44   

Item 7A.

  

Quantitative and Qualitative Disclosure About Market Risk

     62   

Item 8.

  

Financial Statements and Supplementary Data

     62   

Item 9.

  

Changes In and Disagreements With Accountants on Accounting and Financial Disclosure

     62   

Item 9A.

  

Controls and Procedures

     62   

Item 9B.

  

Other Information

     63   

PART III

     

Item 10.

  

Directors, Executive Officers and Corporate Governance

     64   

Item 11.

  

Executive Compensation

     64   

Item 12.

  

Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

     64   

Item 13.

  

Certain Relationships and Related Transactions, and Director Independence

     65   

Item 14.

  

Principal Accounting Fees and Services

     65   

PART IV

     

Item 15.

  

Exhibits and Financial Statements Schedules

     66   

SIGNATURES

     69   


Table of Contents

PART I

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K contains forward-looking statements (within the meaning of the federal securities law) that involve substantial risks and uncertainties. All statements, other than statements of historical facts, included in this Annual Report on Form 10-K regarding our strategy, future operations, future financial position, future net sales, projected costs, projected expenses, prospects and plans and objectives of management are forward-looking statements. The words “anticipates,” “believes,” “estimates,” “expects,” “intends,” “may,” “plans,” “projects,” “will,” “would,” and similar expressions are intended to identify forward-looking statements, although not all forward-looking statements contain these identifying words. We have based these forward-looking statements on our current expectations and projections about future events. Although we believe that the expectations underlying any of our forward-looking statements are reasonable, these expectations may prove to be incorrect, and all of these statements are subject to risks and uncertainties. Should one or more of these risks and uncertainties materialize, or should underlying assumptions, projections, or expectations prove incorrect, our actual results, performance, or financial condition may vary materially and adversely from those anticipated, estimated, or expected. We have included important factors in the cautionary statements included in this Annual Report on Form 10-K, particularly in the section entitled “Risk Factors,” that we believe could cause actual results or events to differ materially from the forward-looking statements that we make. Our forward-looking statements do not reflect the potential impact of any future acquisitions, mergers, dispositions, joint ventures, or investments we may make. We do not assume any obligation to update any forward-looking statements, whether as a result of new information, future events, or otherwise, except as required by law.

The following discussion should be read in conjunction with our financial statements and the related notes contained elsewhere in this Annual Report on Form 10-K and in our other Securities and Exchange Commission filings.

Unless the context requires otherwise, references to “LeMaitre Vascular,” “we,” “our,” and “us” in this Annual Report on Form 10-K refer to LeMaitre Vascular, Inc. and its subsidiaries.

LeMaitre, AlboGraft, AnastoClip, AnastoClip GC, EndoHelix, EndoRE, Expandable LeMaitre Valvulotome, Flexcel, Glow ‘N Tell, Grice, Inahara-Pruitt, InvisiGrip, LeverEdge, LifeSpan, MollRing Cutter, NovaSil, Periscope, Pruitt, Pruitt F3, Pruitt-Inahara, Reddick, VascuTape, XenoSure, and the LeMaitre Vascular logo are registered trademarks of LeMaitre Vascular, and AlboSure, Martin, MollRing MultiTASC, Reddick-Saye, UnBalloon and VCS are unregistered trademarks of LeMaitre Vascular. This Annual Report on Form 10-K also includes the registered and unregistered trademarks of other persons.

 

Item 1. Business

Overview

LeMaitre Vascular is a global provider of medical devices and implants for the treatment of peripheral vascular disease. We develop, manufacture, and market vascular devices to address the needs of vascular surgeons. Our diversified portfolio of peripheral vascular devices consists of brand name products that are used in arteries and veins outside of the heart and are well known to vascular surgeons, including the Expandable LeMaitre Valvulotome, the Pruitt F3 Carotid Shunt, and VascuTape Radiopaque Tape.

We have grown our business by using a three-pronged strategy: competing in niche markets, expanding our worldwide direct sales force, and acquiring and developing complementary vascular devices. Since 1998 we have built our sales force from zero to 78 direct sales representatives as of December 31, 2011 and we have completed a number of vascular device acquisitions.

We estimate that peripheral vascular disease affects more than 20 million people worldwide. We estimate that the annual worldwide market for all peripheral vascular devices is approximately $3 billion and that the

 

1


Table of Contents

annual worldwide market addressed by our core product lines approximates $750 million. We believe that this market will grow due to the increase in the incidence and diagnosis of peripheral vascular disease, a shift to higher priced endovascular devices, and the adoption of western healthcare standards by the developing world. We believe that our strong brands, established sales force, evolving suite of peripheral vascular devices, and broad network of vascular surgeon customers position us to capture an increasing share of this large and growing market.

We sell 12 product lines, most of which are used in open vascular surgery and some of which are used in endovascular procedures. For 2011, 2010, and 2009, our Valvulotomes, Balloon Catheters, and Carotid Shunt product categories have each comprised more than 10% of our revenues. In none of those years, including 2011 did any single product line account for more than 25% of our revenues.

Historically, we have been a leading provider of vascular surgery products in niche product markets characterized by low or limited competition. More recently we have sought to leverage our market leadership in these niche product markets by selling complementary products in more competitive, larger market segments. In addition, our vascular surgeon customers are increasingly performing minimally invasive endovascular procedures, presenting us with attractive opportunities to sell new devices that address their changing product needs.

We sell our products primarily through a direct sales force. Our sales force was comprised of 78 field sales representatives in North America, the European Union, and Japan as of December 31, 2011. We also sell our products through distributors in countries where we do not have a direct sales force. For the year ended December 31, 2011, approximately 93% of our net sales were generated through our direct sales force, and no single customer accounted for more than 1% of our net sales.

The Peripheral Vascular Device Market

We estimate that peripheral vascular disease affects more than 20 million people worldwide. The disease encompasses a number of conditions in which the arteries or veins that carry blood to or from the legs, arms, or organs other than the heart become narrowed, obstructed, weakened, or otherwise compromised. In many cases peripheral vascular disease goes undetected, sometimes leading to life-threatening events—such as stroke, ruptured aneurysm, or pulmonary embolism—or death.

Clinical studies have identified several factors that increase the risk of peripheral vascular disease, including smoking, diabetes, obesity, high blood pressure, lack of exercise, coronary artery disease, high cholesterol, and being over the age of 65. Demographic trends suggest an increase in the prevalence of peripheral vascular disease over time, driven primarily by rising levels of obesity and diabetes and an aging population.

Vascular surgeons treat peripheral vascular disease and also perform vascular procedures associated with other diseases, such as end-stage renal disease. We estimate that there are more than 2,000 board-certified vascular surgeons and several thousand general surgeons who perform vascular procedures in the United States, and that there are more than 3,000 vascular surgeons in Europe and Japan. In contrast to other medical specialists, such as interventional cardiologists and interventional radiologists, vascular surgeons perform both conventional vascular surgeries and endovascular procedures. Conventional vascular surgery involves opening the body, cutting vessels, and suturing. Endovascular procedures typically are minimally invasive, catheter-based procedures involving repairing vessels from within using real-time imaging technologies.

Our History

We were founded in 1983 by George D. LeMaitre, M.D., a vascular surgeon who designed and developed the predecessor to our Expandable LeMaitre Valvulotome and Over-The-Wire LeMaitre Valvulotome. Through a combination of strategic acquisitions and research and development efforts, we have expanded to 12 product lines.

 

2


Table of Contents

We have conducted several acquisitions of complementary products since 1998:

 

Year

  

Acquisition

  

Key Product(s)

1998    Whittaker Screen Printing    Radiopaque tape manufacturing operations
1999    Vermed    Balloon catheters
2001    Ideas for Medicine    Carotid shunts, balloon catheters, and laparoscopic cholecystectomy devices
2003    Credent    Vascular access grafts
2004    VCS Clip    Vessel closure system
2005    Endomed    Thoracic and abdominal stent grafts
2007    Vascular Innovations    Contrast injector
2007    Vascular Architects    Remote endarterectomy devices
2007    UnBalloon Technology    Stent graft modeling catheters
2007    Biomateriali    Polyester grafts and patches
2008    XenoSure(1)    Biologic vascular patch(1)
2010    LifeSpan    ePTFE grafts

 

(1) We obtained exclusive rights to distribute this product under our “XenoSure” brand in the United States and most of Europe until January 26, 2016, and an option to acquire this product commencing January 2, 2014 and expiring January 26, 2016. If we do not meet our obligations under our distribution agreement with the manufacturer, the manufacturer could terminate the agreement, and we would lose our purchase option to acquire this product.

We have relocated most of the manufacturing operations associated with these acquisitions to our Burlington, Massachusetts, headquarters and we continue to look at ways to make our operations more efficient.

Prior to 1999, we had no direct sales force and instead relied on direct marketing to generate brand awareness and product loyalty. In 1999, we began building a direct sales organization that we have continued to expand, most recently into Denmark and Spain in 2011. We currently sell products directly to our hospital customers in the United States and Canada, Japan, and most major European markets.

Our Business Strategies

Our goal is to be the leading global provider of medical devices to vascular surgeons.

To achieve this objective, we are utilizing the following long-term strategies:

 

   

Focus on niche markets. We seek to build and maintain market-leading share positions in niche product markets. We believe that the relative lack of competitive focus on these markets by our larger competitors with greater resources, and the differentiated features and consistent quality of our products, allow for higher selling prices in these markets. In recent years we have sought to leverage these market-leading share positions by selling complementary products in more competitive, larger market segments.

 

   

Expand our direct sales force. We sell our products primarily through a direct sales force in North America, the European Union, and Japan. We intend to further expand our sales force over time. We believe that direct-to-hospital sales build closer customer relationships, allow for higher selling prices, and are not subject to the risk of customer churn resulting from distributor turnover.

 

   

Add complementary products through acquisitions, research and development, and additional regulatory approvals. We intend to further expand and diversify our product offerings and add new technology platforms. We believe our significant experience in acquiring and integrating product lines and businesses is one of our competitive advantages. We actively track industry developments and plan to acquire additional product lines and businesses, refine our current product lines, develop new applications for our existing technologies, and obtain regulatory approvals for our devices in new markets in order to further access the broader peripheral vascular device market.

 

3


Table of Contents

Our Products

The following table describes the primary use and availability of each of our product lines as of March 27, 2012:

 

     Generally Available for Sale in(1)

Product Category

 

Product Line

  Primary Use    United
States
  European
Union
  Japan

Open Vascular

 

Balloon Catheters

- LeMaitre Embolectomy Catheters

- Over-the-Wire Embolectomy Catheters

- NovaSil Embolectomy Catheters

- Pruitt Occlusion Catheters

- Distal Perfusion Catheter

  Removal of blood clots;
occlusion, and facilitation
of blood flow
   ü   ü   ü
 

Carotid Shunts

- Pruitt F3 Carotid Shunts

- Pruitt- Inahara Carotid Shunts

- Flexcel Carotid Shunts

  Facilitation of blood flow
to brain during carotid
plaque removal
   ü   ü   ü
 

Remote Endarterectomy Devices

- MollRing Cutter Transection Device

- Martin Dissector

- EndoHelix Retrieval Device

- Periscope Dissector

- Ring Stripper

  Removal of blockages in
the major arteries of the
leg
   ü   ü   Application
submitted
 

Valvulotomes

- Expandable LeMaitre Valvulotome

- Over-The-Wire LeMaitre Valvulotome

  Destruction of vein valves
to create vein bypass
grafts
   ü   ü   ü
 

Vascular Grafts

- AlboGraft Knitted Vascular Grafts

- AlboGraft Woven Vascular Grafts

- LifeSpan ePTFE Vascular Grafts

  Synthetic vessels for use
in bypass and
replacement procedures
   ü   ü   ü
 

Vascular Patches(2)

- AlboSure Vascular Patches

- XenoSure Biologic Patches

  Synthetic and biological
patches for use in closing
incisions in a blood vessel
   ü   ü  
 

Vein Strippers

- InvisiGrip Vein Stripper

  Single-incision removal
of varicose veins
   ü   ü   ü
 

Vessel Closure Systems

- AnastoClip VCS Vessel Closure System

- AnastoClip GC Vessel Closure System

- Accessory Devices

  Attachment of blood
vessels, primarily for
dialysis access
   ü   ü   ü
Endovascular and Other  

Manual Contrast Injectors

- LeverEdge Contrast Injector

  Injection of contrast
media into blood vessels
   ü   ü  
 

Modeling Catheters

- The UnBalloon Non-Occlusive Modeling Catheter

  Improvement in the seal
of aortic stent grafts
   ü   ü   Application
submitted
 

Radiopaque Tape

- Glow ‘n’ Tell Tape

- LeMaitre Stent Guide

  Improvement in precision
of vascular and
endovascular procedures
   ü   ü   ü
 

Laparoscopic Cholecystectomy Devices

- Reddick Cholangiogram Catheter

- Reddick-Saye Screw Retractor Kit

- Grice Laparoscopic Suture Needle

  Introduction of dye into
the cystic duct; related
uses
   ü   ü  

 

4


Table of Contents

 

(1) Due to varying regulatory schemes and product introduction timelines, it may be that only some models within the applicable product line are approved for sale in the indicated market. For example, in our Vascular Grafts product line, our LifeSpan ePTFE Vascular Graft is available for sale in the United States, the European Union and Japan, but our AlboGraft products are not yet available for sale in Japan.
(2) Our synthetic patch, the AlboSure Vascular Patch, is not yet commercially available. We intend to begin selling this device by 2013. Our XenoSure Biologic Vascular Patch is manufactured by Neovasc Inc. We have exclusive rights to distribute this product under our “XenoSure” brand in the United States and most of Europe until January 26, 2016, and an option to acquire this product commencing January 2, 2014 and expiring January 26, 2016. If we do not meet our obligations under our distribution agreement with the manufacturer, the manufacturer could terminate the agreement, and we would lose our purchase option to acquire this product.

Open Vascular Products

Our open vascular products are used primarily in conventional open vascular surgery for the treatment of peripheral vascular disease. Descriptions of our primary vascular product offerings follow.

Balloon Catheters for Embolectomy, Occlusion and Perfusion

Our LeMaitre line of embolectomy catheters are used to remove blood clots from arteries or veins. We manufacture single-lumen latex and latex-free embolectomy catheters as well as dual-lumen latex embolectomy catheters. The dual-lumen embolectomy catheter allows clot removal and simultaneous irrigation or guide-wire trackability. Occlusion catheters temporarily occlude blood flow to allow the vascular surgeon time and space to complete a given procedure. Perfusion catheters temporarily perfuse blood and other liquids into the vasculature. Our Pruitt line of occlusion and perfusion catheters reduces vessel trauma by using internal balloon fixation rather than traditional external clamp fixation.

Carotid Shunts

Our Pruitt F3, Pruitt-Inahara, Inahara-Pruitt, and Flexcel Carotid Shunts are used to temporarily divert, or shunt, blood to the brain while the surgeon removes plaque from the carotid artery in a carotid endarterectomy surgery. Our Pruitt F3, Pruitt-Inahara, and Inahara-Pruitt shunts feature internal balloon fixation that eliminates the need for clamps, thereby reducing vessel trauma. Our Flexcel shunt is a non-balloon shunt offered for surgeons who prefer to secure their shunt using externally placed clamps.

Remote Endarterectomy Devices

Our EndoRE line of remote endarterectomy devices are used to remove severe atherosclerotic blockages from the major arteries of the leg in a minimally invasive procedure requiring a single incision in the groin. Our EndoRE devices are used to separate the sclerotic blockage from the vessel, cut the far end of the blockage to free it for removal, and then withdraw the blockage from the vessel. A retrospective 133-patient clinical study published in the February 2006 Journal of Vascular Surgery found that, compared to bypass procedures, this minimally invasive procedure leads to less trauma to the patient and reduced hospital stays. It also preserves the patient’s own veins for future use in an unrelated bypass procedure.

Valvulotomes

Our Expandable LeMaitre Valvulotome and our Over-The-Wire LeMaitre Valvulotome cut valves in the saphenous vein, a vein that runs from the foot to the groin, so that the vein can function as a bypass vessel to carry blood past diseased arteries to the lower leg or the foot. The Expandable LeMaitre Valvulotome is the only self-sizing and self-centering valvulotome available, and the Over-The-Wire LeMaitre Valvulotome is the only over-the-wire self-sizing valvulotome available. We believe that our valvulotomes reduce costs for hospitals by enabling less invasive bypass surgery to be performed with several one-inch incisions rather than one continuous

 

5


Table of Contents

ankle-to-groin incision, thereby reducing the length of hospital stays and the likelihood of wound complications. The Expandable LeMaitre Valvulotome is the sixth generation of the original valvulotome developed by our founder, George D. LeMaitre, M.D.

Vascular Grafts

Our AlboGraft Woven and Knitted Vascular Grafts are collagen-impregnated polyester grafts used to bypass or replace diseased arteries. They are available in both straight tube and bifurcated versions.

Our LifeSpan ePTFE Vascular Graft is an expanded polytetrafluoroethylene (ePTFE) graft used to bypass or replace diseased arteries, and to create dialysis access sites. They are available in both regular and thin wall options and with an optional full or partial external spiral support to increase resistance to compression or kinking. Our stepped and quick tapered LifeSpan models are designed to reduce the risk of steal syndrome and high cardiac output, which are complications that may arise in dialysis access grafts.

Vascular Patches

Our AlboSure Vascular Patch is a polyester patch used in conjunction with endarterectomy and vascular reconstructions. We have received regulatory clearance to market our AlboSure Vascular Patch in the United States and European Union and intend to begin selling this device by 2013. Vascular surgeons use patches in conjunction with carotid endarterectomy, remote endarterectomy, and other vascular reconstructions.

We also distribute the XenoSure Biologic Vascular Patch, a patch made from bovine pericardium. We have exclusive rights to distribute this product under our “XenoSure” brand in the United States and most of Europe until January 26, 2016, and an option to acquire this product commencing January 2, 2014 and expiring January 26, 2016.

Vessel Closure Systems

Our AnastoClip VCS and AnastoClip GC Vessel Closure Systems allow surgeons to attach vessels, native and prosthetic, to one another by deploying titanium clips in place of suturing. These vessel closure systems create an interrupted anastomosis, or a vessel attachment that expands and contracts as the vessel pulses, which we believe improves the durability of the anastomosis.

A retrospective 1,110-patient clinical study published in the August 2003 Journal of Vascular Surgery found that the AnastoClip VCS Vessel Closure System improved 24-month patency versus traditional continuous sutures from approximately 34% to 54% in arterio-venous fistulae, which are surgical attachments of arteries and veins, and from approximately 17% to 36% in prosthetic grafts attachments. In 2010 we released the next-generation AnastoClip GC Vessel Closure System, with a new clip design that is intended to provide additional security and ease of use.

Endovascular and Other Products

Our endovascular products are used primarily by vascular surgeons in minimally invasive endovascular procedures, such as stent-grafting, angioplasty, stenting, and atherectomy, and we also sell non-vascular medical devices used in general surgery procedures, primarily laparoscopic cholecystectomy. Descriptions of our primary endovascular and other product offerings follow.

Modeling Catheters

Our UnBalloon Non-Occlusive Modeling Catheter is used to apply radial pressure to the inside of an aortic stent graft in order to seal the outer lining of the stent graft against either the aorta or an adjacent stent graft. The

 

6


Table of Contents

physician expands the device’s nitinol mesh cage inside of the stent graft in order to appose the stent graft lining against the vessel or stent graft wall. An adequate seal will exclude blood flow from the aneurysm, thereby preventing an endoleak, a condition in which blood continues to enter the aneurismal sac, increasing the risk of aneurysm rupture and death. Unlike a traditional balloon catheter, The UnBalloon catheter dilates the aortic stent graft without occluding blood flow, allowing the physician more time to repair an endoleak or model the stent graft while minimizing the risk of stent graft migration during modeling.

Radiopaque Tape

Our VascuTape Radiopaque Tape is a flexible, medical-grade tape with centimeter or millimeter markings printed with our proprietary radiopaque ink that is visible both to the eye and to an x-ray machine or fluoroscope. VascuTape Radiopaque Tape is applied to the skin and provides interventionalists with a simple way to cross-reference between the inside and the outside of a patient’s body, allowing them to locate tributaries or lesions beneath the skin.

Other Products

In some hospitals, vascular surgery procedures are performed by general surgeons. We sell non-vascular medical devices used in general surgery procedures, primarily laparoscopic cholecystectomy. Our leading general surgery product is the Reddick Cholangiogram Catheter, which is used to inject dye into the cystic duct during laparoscopic cholecystectomy. In this procedure, the gall bladder is dissected and removed through small punctures in the abdomen. We also offer two laparoscopic accessories used in laparoscopic gall bladder removal.

Sales and Marketing

As of December 31, 2011, we employed 78 field sales representatives. We believe that the expansion of our direct sales force has been a key factor in our success and it remains one of our primary long-term strategies. In recent years, we have reduced the amount of starting compensation that we typically pay to our sales representatives, and this savings has helped facilitate the hiring of additional sales personnel. Outside our direct markets, we generally sell our products through country-specific distributors. We typically sign exclusive distribution agreements with terms of up to three years specifying minimum annual sales volumes and pricing. These agreements are renewable by mutual agreement.

In addition, we engage in direct marketing efforts, including direct mail and exhibitions at medical congresses, which we believe are important to our brand development and continued success. We believe that direct marketing allows us to market to vascular surgeons beyond the reach of our direct sales force.

Research and Development

Our research and development has historically focused on developing enhancements and extensions to our existing product lines. Our current product development efforts are focused on both the open vascular and endovascular spaces, and are largely improvements to our existing devices. In recent years we have increased investment in product research and development, with the goal of more rapidly developing new products, line extensions, and next-generation devices. In 2011 we introduced two new products to the market, the second-generation of The UnBalloon Non-Occlusive Modeling Catheter and the Over-the-Wire LeMaitre Valvulotome.

Our products are subject to our design control procedures throughout the various stages of product development. These procedures may include bench testing, animal testing, human use testing conducted by independent physicians, and post-market surveillance of product performance, as appropriate. We may use feedback received from independent physicians to demonstrate product functionality, safety, and effectiveness before commencing full-scale marketing of any product.

 

7


Table of Contents

For 2011, 2010, and 2009, our research and development expenditures, including clinical study expenditures, were $4.4 million, $5.5 million and $5.9 million, respectively, representing between 8% and 12% of net sales. As of December 31, 2011, our research and development staff consisted of 13 full-time engineers and technicians.

Manufacturing

Our principal manufacturing facilities are located in Burlington, Massachusetts, where most of our product lines are produced in two ISO 14644-1 Class 8 clean rooms, each approximately 5,500 square feet. Our most recent manufacturing consolidations in Burlington, Massachusetts were the relocation of our AlboGraft Vascular Graft manufacturing operations from Brindisi, Italy and our LifeSpan ePTFE Vascular Graft from Laguna Hills, California, both in 2011. Although most of our product lines are produced in Burlington, Massachusetts, our distributed products are manufactured elsewhere and certain third-parties manufacture our EndoRE remote endarterectomy devices.

We manufacture certain proprietary components, assemble most of our devices ourselves, and inspect, test, and package all of our finished products. By designing and manufacturing many of our products from raw materials, and assembling and testing as many of our subassemblies and products as practical, we believe that we can maintain better quality control, ensure compliance with applicable regulatory standards and our internal specifications, limit outside access to our proprietary technology, ensure adequate product supply, and make design modifications in a timely manner. We have custom-designed proprietary manufacturing and processing equipment and have developed proprietary enhancements for existing production machinery. Nearly all of our products are built to stock.

Our management information systems provide us with the ability to evaluate our performance, collect business intelligence, and make better strategic decisions. These systems include order entry, invoicing, on-line inventory management, lot traceability, purchasing, shop floor control, and shipping and distribution analysis, as well as various accounting-oriented functions. During day-to-day operations, these systems enable us to track our products from the inception of an order through the manufacturing process and then through delivery of the product to the customer.

We purchase components from, and have certain product lines manufactured by, third parties. Most of our components are readily available from several supply sources, but we do rely on single- and limited-source suppliers for several of our key product components and our third-party-manufactured products. We do not have contractual arrangements with most of these suppliers and manufacturers, and we order our supplies and product on an as-needed basis. To date, we have not experienced any material disruption in the adequate supply from existing sources of product and components, but there is no guarantee that we will not experience such disruptions in the future. For instance, the supply of ink for our LifeSpan ePTFE Vascular Graft was indefinitely interrupted due to a fire at our former single-source supplier. Although we are sourcing an alternate supplier for that component and feel that we have an adequate supply of ink on hand, it is possible that we could experience delays in manufacturing the product if we are not successful in timely validating the new supply.

Any disruption in our manufacturing capacity could impact our ability to produce sufficient inventory and meet the demands of our customers, which could adversely affect our financial condition and results of operations.

Our manufacturing facilities have been certified to ISO 13485:2003 quality management system standards, which enables us to satisfy certain regulatory requirements of the European Union, Canada, and other foreign jurisdictions. If we were to lose these certifications, we would no longer be able to sell our products in these countries until we made the necessary corrections to our operations. Our manufacturing facilities are subject to periodic inspections by regulatory authorities and our Notified Body (described below) to ensure compliance

 

8


Table of Contents

with domestic and non-U.S. regulatory requirements. See “—Government Regulation.” In December 2011 and January 2012, we underwent routine audits from our European Notified Body and the FDA, respectively. Although the results of these inspections were satisfactory, the timing and scope of future audits is unknown and it is possible, despite our belief that our quality systems and the operation of our manufacturing facilities will remain in compliance with U.S, and non-U.S. regulatory requirements, that a future audit may result in one or more unsatisfactory results.

Competition

The markets in which our 12 product lines compete are characterized by rapid change resulting from technological advances and scientific discoveries. No one company competes against us in all of our product lines. Rather, we compete with a range of companies, from large to small, including both publicly traded and privately held device companies. Notable competitors include Applied Medical Resources Corporation, Cardiovascular Systems Inc., Cook Group Incorporated, C.R. Bard, Inc., Edwards Lifesciences Corporation, Getinge AB, Jotec GmbH, Medtronic, Inc., Terumo Medical Corporation, Uresil, LLC, and W. L. Gore & Associates.

Our products compete primarily on the basis of their innovative technology, quality, reliability, ease of use, cost-effectiveness, physician familiarity, brand recognition, and service support. Several of our products are sold at higher prices than those of our competitors. We believe that our continued success will depend on our ability to broaden and optimize our direct sales channel, acquire or develop additional vascular device product lines, obtain patent or other product protections, obtain regulatory and reimbursement approvals, maintain sufficient inventory to meet customer demand, and attract and retain skilled personnel.

Many of our competitors have substantially greater financial, technological, research and development, regulatory, marketing, sales, and personnel resources than we do. Certain of these competitors are able to manufacture at lower costs and may therefore offer comparable products at lower prices. Certain of these competitors may also have greater experience in developing and further improving products, obtaining regulatory approvals, and manufacturing and marketing such products. Certain of these competitors may obtain patent protection or regulatory approval or clearance, or achieve product commercialization, before us, any of which could materially adversely affect us.

Intellectual Property

We believe that our success is dependent, to a certain extent, on the development and maintenance of proprietary aspects of our technologies. We rely on a combination of patents, trademarks, trade secret laws, and confidentiality and invention assignment agreements to protect our intellectual property rights.

As of December 31, 2011, we actively maintained 27 issued patents and 7 pending patent applications in the United States and Europe relating to various aspects of our products and/or manufacturing processes. The majority of our issued U.S. patents are set to expire at various times from 2012 to 2020.

We intend to file and prosecute patent applications for our technology in jurisdictions where we believe that patent protection is effective and advisable. Generally, for products that we believe are appropriate for patent protection, we will attempt to obtain patents in the United States and key markets of the European Union. However, depending on circumstances, we may not apply for patents in all or any of those jurisdictions, or we may pursue patent protection elsewhere.

Notwithstanding the foregoing, the patent positions of medical device companies, including our company, are uncertain and involve complex and evolving legal and factual questions. The coverage sought in a patent application can be denied or significantly reduced either before or after the patent is issued. Consequently, there can be no assurance that any of our pending patent applications will result in an issued patent. There is also no

 

9


Table of Contents

assurance that any existing or future patent will provide significant protection or commercial advantage, or whether any existing or future patent will be dominated by a more basic patent, thus possibly requiring us to obtain a license to produce and sell the product.

Third parties may claim that our products infringe on their patents and other intellectual property rights. Some companies in the medical device industry have used intellectual property infringement litigation to gain a competitive advantage. If a competitor were to challenge our patents, licenses, or other intellectual property rights, or assert that our products infringe its patent or other intellectual property rights, we could incur substantial litigation costs, be forced to make expensive changes to our product designs, license rights in order to continue manufacturing and selling our products, or pay substantial damages. Third-party infringement claims, regardless of their outcome, would not only consume our financial resources but also divert our management’s time and effort. Such claims could also cause our customers or potential customers to defer or limit their purchase or use of the affected products until resolution of the claim.

Certain aspects of our products are covered by patents held by third parties. We manufacture, market, and sell these products pursuant to license agreements with these third parties. These arrangements require us to pay royalties, typically determined as a percentage of our net sales for the underlying product. If we fail to make these payments or otherwise fail to observe the terms of these agreements, we may lose our ability to sell these products. For example, we manufacture, market, and sell our AnastoClip and AnastoClip GC Vessel Closure Systems, EndoHelix Retrieval Device, Grice Suture Needle, LifeSpan Vascular Graft, MollRing Cutter Transection Device, Reddick-Saye Screw, and Periscope Dissector products pursuant to licenses with third-party patent holders.

We believe that our strong brands have been an important factor in our success. We rely on common law and registered trademarks to protect our product brands. Some of our registered trademarks are LeMaitre, Pruitt, VascuTape, Glow ‘N Tell, and Reddick, each of which is registered in the United States and the European Union, and in certain cases in other foreign countries.

We rely on trade secret protection for certain unpatented aspects of other proprietary technology. Some of our products are not protected by patents. In the past, other companies have independently developed or otherwise acquired comparable or substantially equivalent proprietary information and techniques, and there can be no assurance that others will not do so in the future or otherwise gain access to our proprietary technology or disclose such technology, or that we can meaningfully protect our trade secrets. We have a policy of requiring key employees and consultants to execute confidentiality agreements upon the commencement of an employment or consulting relationship with us. Our confidentiality agreements also require our employees to assign to us all rights to any inventions made or conceived during their employment with us. We also generally require our consultants to assign to us any inventions made during the course of their engagement by us. There can be no assurance, however, that these agreements will provide meaningful protection or adequate remedies for us in the event of unauthorized use, transfer, or disclosure of confidential information or inventions.

The laws of foreign countries generally do not protect our proprietary rights to the same extent as do the laws of the United States and we may experience more difficulty enforcing our proprietary rights in certain foreign jurisdictions.

Government Regulation

The products we manufacture and market are subject to regulation by the FDA, and, in some instances, other federal and state authorities and foreign governments.

 

10


Table of Contents

United States Regulation

Our products are medical devices subject to extensive regulation by the FDA under the Federal Food, Drug, and Cosmetic Act (the FDCA). FDA regulations govern, among other things, product development, testing, manufacture, packaging, labeling, storage, clearance or approval, advertising and promotion, sales and distribution, and import and export.

Premarket Pathways

Most medical devices must receive either 510(k) clearance or premarket application approval (PMA approval) from the FDA prior to commercial distribution. Devices deemed to pose relatively less risk are placed in either class I or II, which requires the manufacturer to submit a premarket notification requesting permission for commercial distribution; this is known as 510(k) clearance. Some low-risk devices are exempted from this requirement. Class II devices may be subject to special controls, such as performance standards and FDA guidelines that are not applied to class I devices. Devices deemed by the FDA to pose the greatest risk, such as life-sustaining, life-supporting, or implantable devices, or devices deemed not substantially equivalent to a previously 510(k)-cleared device or to a pre-amendment class III device (i.e., one in commercial distribution before May 28, 1976) for which PMA applications have not been called, are placed in class III, which generally requires PMA approval. In all cases, a user fee is required for 510(k) submissions and PMA applications, which in the case of PMA applications can be very costly.

510(k) Clearance. To obtain 510(k) clearance, a manufacturer must submit a premarket notification demonstrating that the proposed device is substantially equivalent in intended use to a “predicate device” (i.e., a previously 510(k)-cleared class I or class II device or a pre-amendment class III device for which the FDA has not yet called for PMA applications). The FDA’s 510(k) clearance pathway usually takes from three to twelve months, but it can last longer. In reviewing a premarket notification, the FDA may request additional information, including clinical data. For example, in reviewing our premarket notification for the AlboGraft Vascular Graft, the FDA requested, and we submitted, clinical data from the use of the device in other countries where it was then already approved for sale. Nearly all of our devices sold in the United States to date are marketed pursuant to the 510(k) process.

After a device receives 510(k) clearance, any modification that could significantly affect its safety or effectiveness, or that would constitute a major change as specified by FDA guidelines, requires a new 510(k) clearance. The FDA requires each manufacturer to make this determination in the first instance, but the FDA can review any such decision. If the FDA disagrees with a manufacturer’s decision not to seek a new 510(k) clearance, the agency may retroactively require the manufacturer to seek 510(k) clearance. The FDA also can require the manufacturer to cease marketing and/or recall the modified device until 510(k) clearance or PMA approval is obtained. Also, the manufacturer may be subject to significant regulatory fines or penalties.

PMA Approval. The PMA approval pathway requires proof of the safety and effectiveness of the proposed device to the FDA’s satisfaction, making this pathway much more costly, lengthy, and uncertain. A PMA application must provide extensive preclinical and clinical trial data, as well as detailed information about the device and its components regarding, among other things, device design, manufacturing, and labeling. As part of the PMA review, the FDA will typically inspect the manufacturer’s facilities for compliance with the Quality System Regulation (QSR) which imposes elaborate testing, control, documentation, and other quality assurance procedures on the manufacturing process.

If the FDA approves a PMA, the approved indications or claims may be more limited than those originally sought. The PMA can include post-approval conditions that the FDA believes to be necessary to ensure the safety and effectiveness of the device including, among other things, restrictions on labeling, promotion, sale, and distribution. Failure to comply with the conditions of approval can result in material adverse enforcement action, including the loss or withdrawal of the approval. Even after approval of a PMA, a new PMA or PMA supplement is required if the device or its labeling or manufacturing process are modified. Supplements to a PMA often

 

11


Table of Contents

require the submission of the same type of information required for an original PMA, except that the supplement is generally limited to that information needed to support the proposed change from the product covered by the original PMA.

Clinical Trials. A clinical trial is typically required to support a PMA application and is sometimes required to support 510(k) clearance. In some cases, one or more smaller feasibility IDE studies may precede a pivotal IDE clinical trial intended to comprehensively demonstrate the safety and effectiveness of the investigational device. All clinical studies of investigational devices must be conducted in compliance with the FDA’s extensive requirements. If an investigational device could pose a significant risk to patients (as defined in the regulations), the FDA, prior to initiation of clinical use, must approve an IDE application showing that it is safe to test the device in humans and that the testing protocol is scientifically sound. A non-significant risk device does not require submission to the FDA of an IDE application. Both significant risk and non-significant risk investigational devices require approval from institutional review boards (IRBs) at the study centers where the device will be used. The FDA and the IRB at each institution at which a clinical trial is being performed may suspend a clinical trial at any time for various reasons, including a belief that the subjects are being exposed to an unacceptable health risk.

During a study, the sponsor must comply with the FDA’s IDE requirements for investigator selection, trial monitoring, reporting, record keeping, and prohibitions on the promotion of investigational devices. The investigators must obtain patient informed consent, rigorously follow the investigational plan and study protocol, control the disposition of investigational devices, and comply with all reporting and record-keeping requirements. Required records and reports are subject to inspection by the FDA. Prior to granting PMA approval, the FDA typically inspects the records relating to the conduct of the study and the clinical data supporting the PMA application for compliance with IDE requirements.

Although the QSR does not fully apply to investigational devices, the requirement for controls on design and development does apply. The sponsor also must manufacture the investigational device in conformity with the quality controls described in the IDE application and any conditions of IDE approval that FDA may impose with respect to manufacturing.

Historically, our products have been introduced into the market using the 510(k) clearance procedure, and we have not used the more burdensome PMA process for any of the products that we currently market or sell in the United States.

Postmarket Regulation

After a device is placed on the market, regardless of the classification or premarket pathway, significant regulatory requirements apply. These include:

 

   

manufacturing establishment registration and device listing with the FDA;

 

   

the QSR, which requires finished device manufacturers, including third-party or contract manufacturers, to follow stringent design, testing, control, documentation, and other quality assurance procedures in all aspects of manufacturing;

 

   

labeling regulations and FDA prohibitions against the promotion of products for uncleared, unapproved, or off-label uses and other requirements related to promotional activities;

 

   

medical device reporting regulations, which require that manufacturers report to the FDA if their device may have caused or contributed to a death or serious injury or malfunctioned in a way that would likely cause or contribute to a death or serious injury if the malfunction were to recur; and

 

   

corrections and removal reporting regulations, which require that manufacturers report to the FDA any field corrections and product recalls or removals if undertaken to reduce a risk to health posed by the device or to remedy a violation of the FDCA that may present a risk to health.

 

12


Table of Contents

We are subject to inspection and marketing surveillance by the FDA to determine our compliance with regulatory requirements. Our most recent FDA inspection was in January 2012, and was satisfactory. Non-compliance with applicable FDA requirements can result in, among other things, public warning letters, fines, injunctions, civil penalties, recall or seizure of products, total or partial suspension of production, failure of the FDA to grant marketing approvals, withdrawal of marketing approvals, a recommendation by the FDA to disallow us to enter into government contracts, and criminal prosecutions. The FDA also has the authority to request repair, replacement, or refund of the cost of any device manufactured or distributed by us. In the event that one of our suppliers fails to maintain compliance with our quality requirements, we may have to qualify a new supplier and could experience manufacturing delays as a result.

Non-U.S. sales of medical devices manufactured in the United States that are not approved or cleared by the FDA for use in the United States, or are banned or deviate from lawful performance standards, are subject to FDA export requirements. Before exporting such products to a foreign country, we must first comply with the FDA’s regulatory procedures for exporting unapproved devices.

Other U.S. Regulations

We and our products are also subject to a variety of state and local laws in those jurisdictions where our products are or will be marketed, and federal, state, and local laws relating to matters such as safe working conditions, manufacturing practices, environmental protection, fire hazard control, and disposal of hazardous or potentially hazardous substances. We are subject to various federal and state laws governing our relationships with the physicians and others who purchase or make referrals for our products. For instance, federal law prohibits payments of any form that are intended to induce a referral for any item payable under Medicare, Medicaid, or any other federal healthcare program. Many states have similar laws. There can be no assurance that we will not be required to incur significant costs to comply with such laws and regulations now or in the future or that such laws or regulations will not have a material adverse effect upon our ability to do business.

We are subject to federal, state, and local laws, rules, regulations, and policies governing the use, generation, manufacture, storage, air emission, effluent discharge, handling, and disposal of certain hazardous and potentially hazardous substances used in connection with our operations. Although we believe that we have complied with these laws and regulations in all material respects and to date have not been required to take any action to correct any noncompliance, there can be no assurance that we will not be required to incur significant costs to comply with environmental regulations in the future.

Non-U.S. Regulation

Sales of medical devices are subject to regulatory requirements in many countries. The regulatory review process may vary greatly from country to country. For example, the European Union has adopted numerous directives and standards relating to medical devices regulating their design, manufacture, clinical trials, labeling, and adverse event reporting, including the Medical Devices Directive (93/42/EEC (the Directive)), which is applicable to our products. Devices that comply with the requirements of the Directive are entitled to bear a CE mark, indicating that the device conforms with the essential requirements of the applicable directive and can be commercially distributed in countries that are members of the European Union, as well as Iceland, Lichtenstein, Norway, and Switzerland. Each member state of the European Union has implemented the directives into its respective national law and has each established a “Competent Authority” to apply the directive in its territory.

The Directive defines a classification system placing devices into Class I, IIa, IIb, or III, depending on the risks and characteristics of the medical device. The Directive also defines the essential requirements that devices must meet before being placed on the market, establishes assessment procedures for approving a device for marketing, and creates mechanisms for national authorities to manage implementation or to intervene when public health requires. Essential requirements include manufacturing, design, performance, labeling, and safety requirements, and may include providing certain clinical data. These requirements vary based on the type of the device and other related factors.

 

13


Table of Contents

A manufacturer of low-risk devices typically may demonstrate conformity to the essential requirements based on a self-declaration. The European Standardization Committees have adopted numerous harmonized standards for specific types of medical devices. Compliance with relevant standards establishes a presumption of conformity with the essential requirements. Manufacturers of higher-risk devices generally must use a “Notified Body”—an appointed independent third party to assess conformity. This third- party assessment may consist of an audit of the manufacturer’s quality system and specific testing of the manufacturer’s devices. An assessment by a Notified Body in one country within the European Union is generally required in order for a manufacturer to commercially distribute the product throughout the European Union. Most of our devices are considered higher-risk devices that require Notified Body assessment.

The European medical device laws also address the advertising and promotion of medical devices, clinical investigations, and requirements for handling adverse events. Post-market surveillance of medical devices in the European Union is generally conducted on a country-by-country basis; however, the Directive sets forth certain specific requirements for reporting adverse events. The Medical Device Vigilance system is the mechanism by which adverse event reporting is managed and monitored in the European Union. In October 2011, we received complaints of two device failures which resulted in a voluntary recall of one production lot of our AlboGraft Vascular Graft. Subsequently, in February 2012, we received complaints of two additional device failures from a second lot which resulted in a voluntary recall of one additional production lot. We believe that we have isolated the root cause of these device failures and implemented corrective actions beginning with lots produced from November 2011. However, there can be no assurance that these failures will not reoccur or that other problems will not develop in the future. As a result of the recalled lots, we recognized $0.2 million of inventory write-offs which we recorded to cost of sales during the year ended December 31, 2011. Also in February 2012, we received an additional complaint on our AlboGraft Vascular Graft that was apparently unrelated to the previous complaints. Although the root cause of that complaint is still under investigation, it appears to be an isolated manufacturing defect, although there is no assurance that this will prove to be the case. We were notified by the regulatory agency in the United Kingdom in late February 2012 that they would issue a Medical Device Alert to all hospitals in the United Kingdom advising caution when implanting the AlboGraft Vascular Graft. Although the Medical Device Alert has not resulted in an additional recall, we believe that such notice adversely affects our reputation and that of our AlboGraft Vascular Graft.

In some cases, we rely on our non-U.S. distributors to obtain premarket approvals, complete product registrations, comply with clinical trial requirements, and complete those steps that are customarily taken in the applicable jurisdictions to comply with governmental and quasi-governmental regulation. In the future, we expect to continue to rely on distributors in this manner in those countries where we continue to market and sell our products through them.

In Japan, the Ministry of Health, Labor and Welfare (MHLW) regulates medical devices through the Pharmaceutical Affairs Law, which was reformed effective April 1, 2005. The revisions to Japan’s regulations have resulted in longer lead times for product registration.

There can be no assurance that new laws or regulations or new interpretations of laws and regulations regarding the release or sale of medical devices will not delay or prevent sale of our current or future products.

Third-Party Reimbursement

United States

Healthcare providers that purchase medical devices generally rely on third-party payors, including the Medicare and Medicaid programs and private payors (such as indemnity insurers, employer group health insurance programs, and managed care plans) to reimburse all or part of the cost of those products. As a result, demand for our products is and will continue to be dependent in part on the coverage and reimbursement policies of these payors. The manner in which reimbursement is sought and obtained varies based upon the type of payor

 

14


Table of Contents

involved and the setting in which the product is furnished and utilized. Furthermore, payments from Medicare, Medicaid, and other third-party payors are subject to legislative and regulatory changes and are susceptible to budgetary pressures.

In the United States, third-party payors generally pay healthcare providers directly for the procedures they perform and in certain instances for the products they use. Alternatively, third-party payors may reimburse patients for all or part of the charges that patients pay for procedures and the products used in connection with those procedures. In either case, our sales volumes depend on the extent to which third-party payors cover our products and the procedures in which they are used. In general, a third-party payor only covers a medical product or procedure when the plan administrator is satisfied that the product or procedure is medically necessary because it improves health outcomes, including quality of life or functional ability, in a safe and cost-effective manner. Even if a device has received clearance or approval for marketing by the FDA, there is no assurance that third-party payors will cover the cost of the device and related procedures in which the device is used.

In many instances, third-party payors cover the procedures performed using our products using price fee schedules that do not vary reimbursement to reflect the cost of the products and equipment used in performing those procedures. In other instances, payment or reimbursement is separately available for the products and equipment used, in addition to payment or reimbursement for the procedure itself. Even if coverage is available, third-party payors may place restrictions on the circumstances in which they provide coverage or may offer reimbursement that is not sufficient to cover the cost of our products. Many of the products that compete with ours are less expensive. Therefore, although coverage may be available for our products and the related procedures, the levels of approved coverage may not be sufficient to justify using our products instead of those of competitors.

Finally, the advent of contracted fixed rates per procedure has made it difficult to receive separate reimbursement for disposable products, even if the use of these products improves clinical outcomes. In addition, many third-party payors are moving to managed care systems in which providers contract to provide comprehensive healthcare for a fixed cost per person. Managed care providers often attempt to control the cost of healthcare by authorizing fewer elective surgical procedures. Under current prospective payment systems, such as the diagnosis-related group system and the hospital out-patient prospective payment system, both of which are used by Medicare and in many managed care systems used by private third party payors, the reimbursement for our products will be incorporated into the overall reimbursement of a procedure, and there will be no separate reimbursement for our products. As a result, we cannot be certain that hospital administrators and physicians will purchase our products.

If hospitals and physicians cannot obtain adequate reimbursement for our products or the procedures in which they are used, our business, financial condition, and results of operations could suffer a material adverse impact.

Non-U.S.

Our success in non-U.S. markets will depend largely upon the availability of reimbursement from the third-party payors through which healthcare providers are paid in those markets. Reimbursement and healthcare payment systems in non-U.S. markets vary significantly by country. The main types of healthcare payment systems are government sponsored healthcare and private insurance. As in the United States, reimbursement is subject to legislative and regulatory changes and is susceptible to budgetary pressures. Reimbursement approval must be obtained individually in each country in which our products are marketed. Outside the United States, we generally pursue reimbursement approval in those countries in which we sell directly to the hospital. In other markets, we generally rely on the distributors who sell our products to obtain reimbursement approval in those countries in which they will sell our products. There can be no assurance that reimbursement approval will be received.

 

15


Table of Contents

Fraud and Abuse Laws

We may directly or indirectly be subject to various federal and state laws pertaining to healthcare fraud and abuse, including anti-kickback laws. In particular, the federal healthcare program Anti-Kickback Statute prohibits persons from knowingly and willfully soliciting, offering, receiving, or providing remuneration, directly or indirectly, in exchange for or to induce either the referral of an individual, or the furnishing, arranging for, or recommending a good or service for which payment may be made in whole or part under federal healthcare programs, such as the Medicare and Medicaid programs. Penalties for violations include criminal penalties and civil sanctions such as fines, imprisonment, and possible exclusion from Medicare, Medicaid, and other federal healthcare programs. The Anti-Kickback Statute is broad and prohibits many arrangements and practices that are lawful in businesses outside of the healthcare industry. In implementing the statute, the Office of Inspector General, or OIG, has issued a series of regulations, known as the “safe harbors.” These safe harbors set forth provisions that, if all their applicable requirements are met, will assure healthcare providers and other parties that they will not be prosecuted under the Anti-Kickback Statute. The failure of a transaction or arrangement to fit precisely within one or more safe harbors does not necessarily mean that it is illegal or that prosecution will be pursued. However, conduct and business arrangements that do not fully satisfy each applicable element of a safe harbor may result in increased scrutiny by government enforcement authorities, such as the OIG.

In March 2010, significant reforms to the U.S. healthcare system were adopted in the form of the Patient Protection and Affordable Care Act (the PPACA). The PPACA includes provisions that, among other things, require detailed disclosure of gifts and other remuneration made to health care professionals.

Employees

We had 276 full-time employees at December 31, 2011. Of these employees, 124 were in manufacturing, and quality assurance, 108 were in sales and marketing, 19 were in research and development and regulatory, and 25 were in general and administrative. We believe that our employee relations are good.

Financial Information by Business Segment and Geographic Data

We operate in one reportable industry segment: the design, marketing, sales and technical support of medical devices and implants for the treatment of peripheral vascular disease. Our chief operating decision maker is our chief executive officer. Our chief executive officer reviews financial information, accompanied by information about revenue by geographic region for purposes of allocating resources and evaluating financial performance. The information included in Note 13 of the Notes to Consolidated Financial Statements is hereby incorporated by reference.

Customers

Our sales are not dependent on any single customer or distributor, and we continue to expand our distribution channel worldwide through direct and indirect sales forces.

Corporate Information

We were incorporated in Massachusetts on November 28, 1983, as Vascutech, Inc. On June 16, 1998, we were reincorporated in Delaware, and on April 6, 2001, we changed our name to LeMaitre Vascular, Inc. Our principal executive offices are located at 63 Second Avenue, Burlington, Massachusetts 01803, and our telephone number is (781) 221-2266.

Where You Can Find More Information

Our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act

 

16


Table of Contents

of 1934 are available through the investor relations portion of our website (www.lemaitre.com) free of charge as soon as reasonably practicable after we electronically file such material with, or furnish it to, the Securities and Exchange Commission, or SEC. Information on our investor relations page and on our website is not part of this Annual Report on Form 10-K or any of our other securities filings unless specifically incorporated herein or therein by reference. In addition, our filings with the Securities and Exchange Commission may be accessed through the Securities and Exchange Commission’s Electronic Data Gathering, Analysis and Retrieval (EDGAR) system at www.sec.gov. You may also obtain copies of the documents at prescribed rates by writing to the Public Reference Section of the SEC at 100 F Street, N.E., Washington, D.C. 20549. Please call the SEC at 1-800-SEC-0330 for further information on the operation of the public reference facilities. All statements made in any of our securities filings, including all forward-looking statements or information, are made as of the date of the document in which the statement is included, and we do not assume or undertake any obligation to update any of those statements or documents unless we are required to do so by law. In addition, our Corporate Governance Guidelines, Code of Business Conduct and Ethics and Charters of our Audit, Compensation and Nominating and Corporate Governance Committees are available on our website and are available in print to any stockholder who requests such information.

 

Item 1A. Risk Factors

The following important factors, among others, could cause our actual operating results to differ materially from those indicated or suggested by forward-looking statements made in this Form 10-K or presented elsewhere by management from time to time. Investors should carefully consider the risks described below before making an investment decision. The risks described below are not the only ones we face. Additional risks not presently known to us or that we currently believe are immaterial may also significantly impair our business operations. Our business could be harmed by any of these risks. The trading price of our common stock could decline due to any of these risks, and investors may lose all or part of their investment.

Risks Related to Our Business

We may experience significant fluctuations in our quarterly and annual results.

Fluctuations in our quarterly and annual financial results have resulted and will continue to result from numerous factors, including:

 

   

strategic actions by us, such as acquisitions of additional businesses, products, or technologies;

 

   

the discontinuation of a product line or other revenue generating activity, such as our stent grafts;

 

   

the relocation and integration of manufacturing operations and other strategic restructuring, such as the transfer of AlboGraft production;

 

   

adverse regulatory actions which may necessitate recalls of our products or warning letters that negatively affect the markets for our products, such as the recent AlboGraft warning letter in the United Kingdom;

 

   

our determination whether or not to continue the payment of quarterly cash dividends;

 

   

our determination whether of not to continue share repurchases;

 

   

costs incurred in connection with the termination of contractual and other relationships, including distributorships;

 

   

our ability to collect outstanding accounts receivable in selected countries outside of the United States;

 

   

changes in the mix of products we sell;

 

   

the expiration or exhaustion of deferred tax assets such as net operating loss carry-forwards;

 

   

effects of domestic and foreign economic conditions and exchange rates on our industry and/or customers;

 

17


Table of Contents
   

increased product and price competition; and

 

   

the loss of any significant customer, especially in regard to any product that has a limited customer base.

These factors, some of which are not within our control, may cause the price of our common stock to fluctuate substantially. If our quarterly operating results fail to meet or exceed the expectations of securities analysts or investors, our stock price could drop suddenly and significantly. We believe the quarterly comparisons of our financial results are not always meaningful and should not be relied upon as an indication of our future performance.

We may not maintain our recent profitability.

As of December 31, 2011, we had an accumulated deficit of approximately $6.4 million. While we reported operating and net income for the years ended December 31, 2011, 2010 and 2009, we had an operating and a net loss for the years ended December 31, 2008 and 2007. There can be no assurance we will achieve significant net sales gains or maintain either operating or net profitability in the future. As a result of our exit from stent grafts in 2011, reported sales growth in 2012 may be challenged, and as a result we expect that it will be lower than our 2011 reported sales. In addition, we intend to increase operating expenses in 2012 in areas such as sales and product development, and as a result we may need to maintain or reduce our operating expenses in other areas in order to maintain or improve operating profitability. Decreased investment levels may inhibit future growth in net sales and earnings.

Additionally, our ability to maintain and increase profitability will be influenced by many factors, including:

 

   

the level and timing of future sales, manufacturing costs and operating expenditures;

 

   

market acceptance of our new products;

 

   

the productivity of our direct sales force and distributors;

 

   

fluctuations in foreign currency exchange rates;

 

   

our ability to successfully build direct sales organizations in new markets;

 

   

our ability to successfully acquire and develop competitive products;

 

   

our ability to successfully integrate acquired businesses, products, or technologies;

 

   

the impact on our business of competing products, technologies, and procedures;

 

   

the impact of the 2.3% medical device excise tax commencing in 2013;

 

   

our ability to obtain or maintain regulatory approvals for our products in new and existing markets; and

 

   

the cost of intellectual property challenges, if any.

If we are unable to expand our product offerings, we may not achieve our growth objectives and our results of operations could suffer.

The treatment of peripheral vascular disease is shifting from open vascular surgery to minimally invasive endovascular procedures, and many of our products are used primarily or exclusively in open vascular surgery procedures. We market and sell our products primarily to vascular surgeons, and the majority of our marketing efforts and sales relate to products used in open vascular surgery rather than in endovascular procedures. Recent transactions in 2011 have further concentrated our focus on open vascular procedures. For instance, in 2011 we divested a large portion of our endovascular product portfolio, our TAArget Thoracic Stent Graft and our UniFit Abdominal Stent Graft, and further ended our relationship with Endologix, Inc. for distribution of its Powerlink stent graft. Furthermore, notwithstanding periodic product updates and next-generation iterations, many of our devices have been on the market for several years or longer. We may not be able to compete effectively with our competitors unless we can keep pace with existing or new products and technologies in the vascular device

 

18


Table of Contents

market and the minimally invasive endovascular procedure market, in particular. Our success in developing and commercializing new products and new versions of our existing products is affected by our ability to:

 

   

identify in a timely manner new market trends and customer needs;

 

   

keep pace with technological changes and industry standards;

 

   

obtain regulatory clearance or approval of new products and technologies;

 

   

successfully develop cost-effective manufacturing processes for such products;

 

   

commercially introduce such products and technologies; and

 

   

achieve market acceptance.

If we are unable to expand our product offerings, we may not achieve our growth objectives and our results of operations could suffer.

We may acquire businesses and assets in the future. We may experience difficulties in completing the integration of these acquisitions into our business, or we may not realize the anticipated benefits of these acquisitions.

In order to expand our product offerings, we have completed several acquisitions, and a key part of our strategy is to acquire additional businesses, products, or technologies in the future. Our growth strategy depends in part upon our ability to identify, negotiate, complete, and integrate suitable acquisitions and develop products from uncommercialized intellectual property that we acquire. If we are unable to complete acquisitions on satisfactory terms, our growth objectives could be negatively affected.

Even if we complete acquisitions, we may experience:

 

   

difficulties in integrating any acquired companies, personnel, and products into our existing business;

 

   

difficulties in integrating manufacturing operations into our existing business or successfully replicating manufacturing processes at new manufacturing facilities;

 

   

difficulties or delays in transitioning clinical studies or unfavorable results from such clinical studies;

 

   

difficulties or delays in commercializing intellectual property that we acquire;

 

   

the sudden reduction in volume or loss of orders from a key customer, particularly where the acquired company has concentrated sales;

 

   

diversion of our management’s time and attention from other business concerns;

 

   

challenges resulting from limited or no prior experience in new markets or countries we may enter;

 

   

higher costs of integration than we anticipated;

 

   

unknown or unanticipated liabilities included as part of the acquisition;

 

   

the need to improve an acquired product in order to gain broader market acceptance;

 

   

difficulties in retaining key employees of the acquired business who are necessary to manage these acquisitions;

 

   

difficulties in acquiring the rights to and protecting intellectual property;

 

   

difficulties if the acquired company is remote or inconvenient to our Burlington, Massachusetts, headquarters;

 

   

dilution as a result of equity financing required to fund acquisition costs; or

 

   

debt as a result of debt financing required to fund acquisition costs, which would be senior to our outstanding shares of capital stock, and which would require interest payments to a lender.

 

19


Table of Contents

We could also discover deficiencies withheld from us due to fraud or otherwise not uncovered in our due diligence prior to an acquisition, including deficiencies in internal controls, data adequacy and integrity, product quality, and regulatory compliance, as well undisclosed contractual or other liabilities and product liabilities, any of which could result in us becoming subject to penalties or other liabilities. Any of these difficulties could negatively impact our ability to realize the intended and anticipated benefits that we currently expect from our acquisitions or from acquisitions we complete in the future and could harm our financial condition and results of operations.

For instance, in December 2007 we acquired Biomateriali S.r.l., an Italian manufacturer of prosthetic polyester grafts. In February 2011 we closed our AlboGraft Vascular Graft manufacturing facility in Brindisi, Italy and transferred production to our Burlington, Massachusetts headquarters. Initially, we encountered difficulties and delays which negatively impacted our ability to manufacture sufficient quantities of the devices to satisfy demand. Also, the transfer was more expensive than we anticipated. In addition, between October 2011 and February 2012, we received five product complaints on grafts produced in our Burlington, Massachusetts headquarters which resulted in the recall of two AlboGraft production lots and a Medical Device Alert sent to all hospitals in the United Kingdom urging vigilance when using the AlboGraft. If our relocation of this product line to our Burlington, Massachusetts headquarters continues to be more costly or difficult than anticipated, our financial condition or results of operations may be harmed.

For any of these reasons or as a result of other factors we may not realize the anticipated benefits of acquisitions and our operating results may be harmed.

Fluctuations in foreign currency exchange rates could result in declines in our reported sales and earnings.

For the full year ended December 31, 2011, 36% of net sales were derived from sales occurring outside of the United States. Because the majority of our sales outside of the Americas are denominated in local currencies, our reported sales and earnings are subject to fluctuations in foreign exchange rates. At present, we do not manufacture any of our products outside the United States and we rarely engage in hedging transactions to protect against uncertainty in future exchange rates between particular foreign currencies and the U.S. dollar. A decline in the value of the euro against the U.S. dollar could be expected to have a negative impact on our revenue and earnings growth as euro-denominated revenues and earnings, if any, would be translated into U.S. dollars at a reduced value. We cannot predict the impact of foreign currency fluctuations, and foreign currency fluctuations in the future may adversely affect our sales and earnings.

Our assumptions about the market for our products may not be correct.

We are focused on the market for devices used to treat peripheral vascular disease. We believe that demographic trends point towards an increase in the need for our products. However, the projected demand for our products could materially differ from actual demand if our assumptions regarding these trends and acceptance of our products by the medical community prove to be incorrect or do not materialize or if drug therapies gain more widespread acceptance as a viable alternative treatment, which in each case could adversely affect our business prospects and profitability. For example, sales of our shunt products have declined in recent quarters, possibly in relation to the introduction of carotid stenting in recent years, and this trend could continue to adversely impact our future growth.

We face intense competition from other companies, technologies, and alternative medical procedures and we may not be able to compete effectively.

The markets in which we compete are highly competitive, subject to change, and significantly affected by new product introductions and other activities of industry participants. Although no one company competes against us in all of our product lines, a number of manufacturers of peripheral vascular devices have substantially greater capital resources, larger customer bases, broader product lines, larger sales forces, greater marketing and management resources, larger research and development staffs, and larger facilities than ours; have established

 

20


Table of Contents

reputations with our target customers; and have developed worldwide distribution channels that are more effective than ours. Our competitors could elect to devote additional resources to the markets in which we currently enjoy less competition. Also, although we currently have leading market positions in the markets for some of our products, this is not true for the markets for all of our products. We have from time to time experienced difficulties competing against very large companies.

Recent industry consolidation could make the competitive environment more difficult for smaller companies like ours. Many of our competitors have substantially greater financial, technological, research and development, regulatory, marketing, sales, and personnel resources than we do. Certain of these competitors are able to manufacture at lower costs and may therefore offer comparable products at lower prices. Certain of these competitors may also have greater experience in developing and further improving products, obtaining regulatory approvals, and manufacturing and marketing such products. Certain of these competitors may obtain patent protection or regulatory approval or clearance, or achieve product commercialization, before us, any of which could materially adversely affect us. Further, if the trend towards endovascular procedures versus open vascular procedures continues or accelerates, our competitors may be better poised to take advantage of that trend, since our main product lines are used primarily in open vascular procedures. Because of the size of the vascular disease market opportunity, competitors and potential competitors have dedicated, and we believe will continue to dedicate, significant resources to aggressively promote their products. Also, new product developments that could compete with us more effectively are likely because the vascular disease market is characterized by extensive research efforts and technological progress. Competitors may develop technologies and products that are safer, more effective, easier to use, less expensive, or more readily accepted than ours. Their products could make our technology and products obsolete or noncompetitive. Our competitors may also be able to achieve more efficient manufacturing and distribution operations than we can. In addition, many of our products face competition from alternative procedures that utilize a different kind of medical device that we do not currently sell. Increased competition could also result in price reductions and loss of market share, any of which could result in lower revenues and reduced gross profits.

If we fail to convert additional countries or products from distributor sales to direct sales, or encounter difficulties in effecting such conversions, our results of operations could suffer.

In 2011, we converted Spain and Denmark from distributor sales to direct sales. In the future, we also intend to convert select other countries and products from distributor sales to direct sales. Such conversions typically result in disruptions in our sales in the applicable geographies. These transitions may also have an adverse effect on our cash flow from operations because distributors, unlike direct sales personnel, pay us for inventory that they stock for later sale. In addition, switching to a direct sales force may subject us to longer customer collection times and larger bad debt expense, since we would be required to collect customer payments directly rather than through a distributor.

Our distribution agreements are typically exclusive with terms of up to three years. These agreements may temporarily constrain our ability to convert certain countries or products from a distributor to a direct sales model. Further, even where the payment of compensation is not required by contract or local law, it may be prudent to make such a payment in order to assure a successful market transition. For example, we paid consulting and transition services fees to our former distributors in Spain and Denmark in connection with recent conversions to direct sales in those countries even though not required under an existing contract or local law, because the absence of cooperation by a distributor may result in the sudden erosion of our customer base, which could materially harm our ability to sell our product in that country.

Following termination of any distribution relationship, we may encounter difficulties in transitioning to a direct-sales model in any country in question. It may take us longer than expected to find sufficient qualified sales personnel to establish an effective sales force, which could negatively impact projected sales. If a distributor sold our products through a network of sales agents, rather than exclusively through its own personnel, we may not be able to establish relationships with all members of that network, temporarily limiting our access to the existing market. Similarly, failure to maintain or quickly re-establish a distributor’s close

 

21


Table of Contents

relationships with the physicians who use our products could cause a drop in sales. Further, it may be difficult or impossible to transfer the assignment of a distributor’s rights to sell our products, and as a result sales to customers may be delayed until a new agreement or approval is obtained. The transition to a direct sales model may also require us to incur additional expenses and meet regulatory requirements that were previously the responsibility of the distributor. As a result of these risks, there can be no assurance that we will be successful in transitioning to a direct sales model in Spain, Denmark, or any other countries that we select, and difficulties that we encounter in these transitions could negatively affect our business.

Current economic instability may harm our operating results.

Financial markets and the economies in the United States and internationally have recently experienced disruption and volatility and conditions could worsen. As a result, the economic environment may, among other things:

 

   

create downward pressure on the pricing of our products;

 

   

adversely affect the collection of accounts receivable, particularly in regions of Southern Europe such as Italy, Spain, and Greece;

 

   

increase the sales cycle for certain of our products;

 

   

slow the adoption of new technology;

 

   

adversely affect our customers, causing them to reduce spending; and

 

   

adversely affect our suppliers, which could disrupt our ability to produce our products.

Any of these conditions could harm our operating results and liquidity.

If we are unable to increase our selling prices to customers, our rate of net sales growth might be reduced and our operating results could suffer.

In the fiscal years ended December 31, 2011 and 2010, a material portion of our increases in net sales was driven by higher average selling prices to our hospital customers across several of our product lines, particularly with respect to sales occurring in the United States. We have in the past been able to rely upon our intellectual property position, our well-known brands, our established reputation in the vascular surgery device marketplace, and, in some cases, an absence of competition, to implement price increases. If healthcare spending is reduced, particularly in the United States, in response either to government-enacted healthcare reform or to general economic conditions, if the reimbursement rates for the medical procedures in which our products are used are reduced or constrained, or if competitors introduce lower-priced products of comparable safety and efficacy, we may become unable to implement further increases in the selling prices of our products. If we become unable to raise selling prices, it might reduce our rate of net sales growth, which could harm our operating results.

If there is a disruption in the supply of products that we distribute, or if our relationships with their manufacturers are impaired, our net sales and results of operations could be harmed.

We are party to agreements with Neovasc Inc. to distribute the XenoSure Biologic Vascular Patch in the United States and most of Europe, and from time to time we have been party to agreements with other manufacturers to distribute products in certain countries in which we have a direct sales force. If we are unable to market these products successfully, or if our agreement with a manufacturer is terminated early, our net sales and results of operations would likely suffer. If we do not meet our minimum purchase requirements under any distribution agreement, and do not cure this deficiency, the agreement may be terminated by the manufacturer, which, in the case of Neovasc, would result in the loss of our purchase option to acquire the XenoSure product. In addition, even if we market our distributed products successfully, if the manufacturer is unable to produce enough of its products to meet our demands, we may not be able to meet our customers’ demands, and our net sales and results of operations may suffer.

 

22


Table of Contents

Our devices may not achieve market acceptance, which could adversely affect our business.

Some of our devices have been recently introduced into the market, including The UnBalloon Non-Occlusive Modeling Catheter and the Over-The-Wire LeMaitre Valvulotome, and we cannot assure you that any of those devices will achieve market acceptance. The same is true of new devices that we may acquire or internally develop in the future. The marketing of our products requires a significant amount of time and expense in order to identify and develop relationships with the physicians who may use our products, invest in training and education with these physicians, and employ a sales force that is large enough to interact with the targeted physicians, with no assurance of success. In some cases, our devices may face competition from devices marketed by our competitors, and our customers may not prefer our devices. In other cases, our devices may be used in new procedures and techniques, and if physicians do not adopt these procedures and techniques, demand for these devices would fail to develop. For example, in 2010 we launched The UnBalloon Non-Occlusive Modeling Catheter in Europe, but it did not achieve widespread market adoption because of user convenience and design issues. This catheter was subsequently withdrawn from the market, redesigned by our research and development department, and then re-released into European and United States markets in the fourth quarter of 2011. There can be no assurance that the re-designed device will achieve wider market adoption than first version of the device. If our products do not gain market acceptance, our business could be adversely affected.

If we are unable to manage the anticipated growth of our business, our financial condition and operating results could be adversely affected.

The growth that we have experienced, and may experience in the future, will continue to provide challenges to our organization. For example, since 1998 we have completed several acquisitions, and we expect to pursue additional acquisitions in the future. As our operations expand, both in terms of scope and geographic coverage, we expect that we will need to manage additional relationships with various partners, suppliers, and other organizations. We also will need to manage the corresponding growth of our manufacturing operations. Our ability to manage our operations and growth requires us to continue to improve our operational, financial, and management controls and reporting systems and procedures, and may in the future require us to transition to new enterprise management software. Such growth could place a strain on our administrative and operational infrastructure. We may not be able to make improvements to our management information and control systems in an efficient or timely manner, and we may discover deficiencies in existing systems and controls. If we cannot scale and manage our business appropriately, our anticipated growth may be impaired and our financial results could suffer.

The risks inherent in operating internationally and the risks of selling and shipping our products and of purchasing our components and products internationally may adversely impact our net sales, results of operations, and financial condition.

We derive a significant portion of our net sales from operations in markets outside of the United States. For the full year ended December 31, 2011, 36% of our net sales were derived from our operations outside of the Americas. Our international sales operations expose us and our representatives, agents, and distributors to risks inherent in operating in foreign jurisdictions. These risks include:

 

   

fluctuations in foreign currency exchange rates;

 

   

the imposition of additional U.S. and foreign governmental controls or regulations, including export licensing requirements, duties and tariffs, and other trade restrictions;

 

   

the risk of non-compliance with the Foreign Corrupt Practices Act by our sales representatives or our distributors;

 

   

the imposition of U.S. and/or international sanctions against a country, company, person, or entity with whom we do business that would restrict or prohibit continued business with the sanctioned country, company, person, or entity;

 

23


Table of Contents
   

a shortage of high-quality sales personnel and distributors;

 

   

loss of any key personnel who possess proprietary knowledge, or who are otherwise important to our success in certain international markets;

 

   

changes in third-party reimbursement policies that may require some of the patients who receive our products to directly absorb medical costs or that may necessitate the reduction of the selling prices of our products;

 

   

the imposition of restrictions on the activities of foreign agents, representatives, and distributors;

 

   

scrutiny of foreign tax authorities, which could result in significant fines, penalties, and additional taxes being imposed on us;

 

   

pricing pressure that we may experience internationally;

 

   

laws and business practices favoring local companies;

 

   

longer payment cycles;

 

   

difficulties in enforcing agreements and collecting receivables through certain foreign legal systems;

 

   

difficulties in enforcing or defending intellectual property rights;

 

   

exposure to different legal and political standards; and

 

   

political, economic, and/or social instability.

We cannot assure you that one or more of these factors will not harm our business. Any material decrease in our international sales would adversely impact our net sales, results of operations, and financial condition.

If we experience continued difficulties in manufacturing our AlboGraft Vascular Graft, which was relocated from Brindisi, Italy to Burlington, Massachusetts in 2011, then our financial condition and results of operations could be harmed.

In February 2011, we closed our AlboGraft Vascular Graft manufacturing facility in Brindisi, Italy and transferred production to our Burlington, Massachusetts headquarters. Initially, we encountered difficulties and delays which negatively impacted our ability to manufacture sufficient quantities of the devices to satisfy demand. Also, the transfer has been more expensive than we anticipated. In addition, between October 2011 and February 2012, we received five product complaints on products produced in Burlington, Massachusetts which resulted in the recall of two AlboGraft production lots and a Medical Device Alert sent to all hospitals in the United Kingdom urging vigilance when using the AlboGraft. If our relocation of this product line to our Burlington, Massachusetts headquarters continues to be more costly than anticipated, our financial condition or results of operations may be harmed.

We depend on single- and limited-source suppliers for some of the components to our products, as well as for acquired products that have not been transitioned to in-house manufacture, and if any of those suppliers are unable or unwilling to supply them on acceptable terms or otherwise, it could limit our ability to deliver our products to our customers on a timely basis or at all.

We rely on single- and limited-source suppliers for some of our important product components, as well as for products we have acquired that are not manufactured in-house. For example, our EndoRE remote endarterectomy product line is manufactured for us by third-party suppliers. There are relatively few, or in some cases no, alternative, validated sources of supply for these components and products. We do not have supply agreements with most of these suppliers, and instead place orders on an as-needed basis. These suppliers could discontinue or be rendered incapable of the manufacture or supply of these components or products at any time. For instance, the supply of ink for our LifeSpan ePTFE Vascular Graft was indefinitely interrupted due to a fire at our former single-source supplier. Although we are sourcing an alternate supplier for that component and feel

 

24


Table of Contents

that we have an adequate supply of ink on hand, it is possible that we could experience delays in manufacturing the product if we are not successful in timely validating the new supply. We do not carry a significant inventory of these components and products. Identifying and qualifying additional or replacement suppliers, if required, may not be accomplished quickly or at all and could involve significant additional costs. Any supply interruption from our vendors or failure to obtain additional vendors for any of the components used to manufacture our products would limit our ability to manufacture our products, may result in production delays and increased costs, and may limit our ability to deliver products to our customers. If we are unable to identify alternate sources of supply for the components, we would have to modify our products to use substitute components, which may cause delays in shipments, increase design and manufacturing costs, and increase prices for our products. We cannot assure you that any such modified products would be as effective as the predecessor products, or that such modified products would gain market acceptance. This could lead to customer dissatisfaction and damage to our reputation and our financial condition or results of operations may be harmed.

Any disruption in our manufacturing facilities could harm our results of operations.

Our principal worldwide executive, distribution, and manufacturing operations are located at adjacent 27,098 square foot and 21,929 square foot leased facilities located in Burlington, Massachusetts. These facilities and the manufacturing equipment we use to produce our products would be difficult to replace and could require substantial lead-time to repair or replace in the event of a natural or man-made disaster. In such event, we could not shift production to alternate manufacturing facilities, and we would be forced to rely on third-party manufacturers. Although we possess insurance for damage to our property and the disruption of our business from casualties, such insurance may not be sufficient to cover all of our potential losses, including potential damage to our reputation, and may not continue to be available to us on acceptable terms, or at all.

Our focus on the needs of vascular surgeons could harm our business if interventional cardiologists and interventional radiologists perform a greater percentage of new procedures that replace those procedures traditionally performed by vascular surgeons, or if vascular surgeons increasingly specialize in procedures for which we do not sell devices.

The treatment of peripheral vascular disease is increasingly shifting from open vascular surgery to minimally invasive endovascular procedures. We market and sell our products primarily to vascular surgeons, and the majority of our marketing efforts and sales relate to products used in open vascular surgery rather than in endovascular procedures. Recent transactions in 2011 have further concentrated our focus on open vascular procedures. For instance, in 2011 we divested a large portion of our endovascular product portfolio, our TAArget Thoracic Stent Graft and our UniFit Abdominal Stent Graft, and further ended our relationship with Endologix, Inc. for distribution of its Powerlink stent graft.

In addition to performing traditional open surgical procedures, vascular surgeons in growing numbers also perform minimally invasive, image-guided interventional procedures for peripheral vascular disease. However, vascular surgeons may not adopt these procedures in the numbers we expect and instead these procedures may be largely performed by interventional cardiologists and interventional radiologists. Many of our competitors have focused their sales efforts on these interventionalists. If interventional cardiologists and interventional radiologists perform a greater percentage of these new procedures than we expect, our net sales may decline.

Moreover, demographic trends and other market factors, such as reimbursement rates, are driving vascular surgeons in the United States and potentially in other markets to increasingly specialize in certain kinds of procedures, such as endovascular therapies, the creation and maintenance of dialysis access sites, and the treatment of varicose veins. Sometimes these physicians will discontinue performing other vascular procedures. If this trend continues, it could lead to the fragmentation of our customer base, which would reduce cross-selling opportunities and the efficiency of each sales call by our sales representatives, which in turn would negatively impact our business.

 

25


Table of Contents

We depend on our senior management team and other key scientific, sales, and technical personnel, and if we are unable to retain them or recruit additional qualified personnel we may not be able to manage our operations and meet our strategic objectives.

We depend on the continued services of our senior management team and other key scientific, sales, and technical personnel, as well as our ability to continue to attract and retain additional highly qualified personnel. Our ability to retain our skilled labor force and our success in attracting and hiring new skilled employees will be a critical factor in determining whether we will be successful in the future. Each of our key employees may terminate his or her employment with us at any time. The loss of any of our senior management team or key employees could harm our business. We compete for such personnel with other companies, academic institutions, government entities, and other organizations. We may not be able to meet our future hiring needs or retain existing personnel on acceptable terms. We could face significant challenges and risks in hiring, training, managing, and retaining engineering and sales employees. Any loss or interruption of the services of our other key personnel could also significantly reduce our ability to effectively manage our operations and meet our strategic objectives, because we cannot assure you that we would be able to find an appropriate replacement should the need arise. We maintain life insurance payable to us on our Chairman and Chief Executive Officer, George W. LeMaitre, but not on our other key personnel.

If we do not maintain our relationships with our physician customers, our growth may be limited and our business could be harmed.

Physicians typically influence the medical device purchasing decisions of the hospitals and other healthcare institutions in which they practice. Consequently, our relationships with our physician customers are critical to our continued growth. We believe that these relationships are based on our long-standing reputation and presence in the market for peripheral vascular devices, the quality of our product offerings and clinical outcomes, our marketing efforts and our presence at medical society meetings. Any actual or perceived diminution in our reputation or the quality of our products or our failure or inability to maintain these other efforts could damage our current relationships, or prevent us from forming new relationships, with physicians and cause our growth to be limited and our business to be harmed.

Our lack of customer purchase contracts makes it difficult to predict sales and plan manufacturing requirements, which could lead to lower net sales, higher expenses, and reduced margins.

We generally do not have long-term purchase contracts with our hospital customers, who typically order products on an as-needed basis. As a result, it is difficult to accurately forecast our component and product requirements. Our manufacturing and operating expenses are largely based on anticipated sales volume, and a significant portion of these expenses is and will continue to be fixed. We must plan production and order product components and third-party manufactured products several months in advance of customer orders. In addition, lead times for product components and third-party manufactured products that we order vary significantly and depend on factors such as the specific supplier and demand for each component at any given time. These factors expose us to a number of risks, such as the following:

 

   

if we overestimate our requirements, or experience shortages, we may be obligated to carry more inventory than we need, which could result in write-offs of excess or obsolete inventory;

 

   

if we underestimate our requirements, we may have an insufficient product component inventory, which could disrupt manufacturing of our products and cause delays in shipments and net sales; and

 

   

if we experience shortages of product components from time to time, the manufacturing and shipping of our products could be delayed.

If any of the foregoing occurs, it could lead to lower net sales, higher expenses, and reduced margins.

 

26


Table of Contents

The use or misuse of our products may result in injuries that lead to product liability suits, which could be costly to our business.

Although we offer training for physicians in the use of some of our products, we do not require that physicians be trained in the use of our products. Not requiring training specific to the use of our devices may expose us to greater risk of product liability if injuries occur during a procedure involving our products. In addition, if demand for our products continues to grow, less skilled surgeons will likely use the devices, potentially leading to an increased incidence of patient injury and an increased risk of product liability or product complaints.

If our products are defectively designed, manufactured, or labeled, contain defective components, or are misused, or if our products are found to have caused or contributed to injuries or death, we may become subject to costly litigation by our customers or their patients. We are from time to time involved in product liability claims. Product liability claims could divert management’s attention from our core business, be expensive to defend, and result in sizable damage awards against us. Claims of this nature may also adversely affect our reputation, which could damage our position in the market and subject us to product recalls.

We cannot assure you that our product liability insurance coverage will be sufficient to satisfy any claim made against us. Further, we may not be able to maintain the same level of coverage, and we may not be able to obtain adequate coverage at a reasonable cost and on reasonable terms, if at all. Any product liability claim brought against us, with or without merit, could increase our product liability insurance rates or prevent us from securing coverage in the future. Additionally, if any such product liability claim or series of claims is brought against us for uninsured liabilities or is in excess of our insurance coverage, our business could be harmed.

We rely on our independent distributors to market and sell our products in select markets outside of the United States and Canada.

Sales of our products through independent distributors represented 7% of our net sales for the year ended December 31, 2011. Our success in these markets depends largely upon marketing arrangements with distributors, in particular their sales and service expertise and relationships with their respective customers in the marketplace. Although we intend to replace some of these distributors with a direct sales force, this will take time and we may maintain a distribution model in some markets. We do not control our distributors and they may not be successful in implementing our marketing plans.

Many of our distributors initially obtain and maintain foreign regulatory approval for sale of our products in their respective countries. We do not have long-term contracts with many of our distributors, and our distributors may terminate their relationships with us on little or no notice. In addition, some of our distributors are not required to purchase any minimum amount of products from us, may sell products that compete with ours or devote more efforts to selling other products, and may stop selling our products at any time. If we lose any of our significant distributors, if we fail to recruit and retain additional skilled distributors in these locations, or if our distributors devote more effort to selling products other than ours, our operations could be harmed. We have experienced turnover with some of our distributors in the past that has impacted our short-term financial results while we transitioned to new distributors. Similar occurrences could happen in the future.

We may require additional capital and failure to attract additional capital on acceptable terms could impair our growth.

We may require additional capital to execute our strategies and expand our business. In particular, we depend on access to capital to acquire products and technologies that complement our existing product lines. If we complete an acquisition at a purchase price approaching or in excess of available capital resources, or if these resources are otherwise insufficient to fund our operations, we will require debt or equity financing. Equity financing, if available, may be dilutive to our stockholders. If we raise additional capital through the issuance of debt, this debt will be senior to our outstanding shares of capital stock upon our liquidation. The availability of

 

27


Table of Contents

such financing depends in large measure on capital markets and liquidity factors over which we exert little control. Financing may not be available or, if available, may not be available on terms satisfactory to us and could result in significant stockholder dilution. In addition, covenants in debt financing arrangements may restrict our ability to operate our business or obtain additional debt financing. These covenants may also require us to attain certain levels of financial performance and we may not be able to do so; any such failure may result in the acceleration of such debt and the foreclosure by our creditors on the collateral we used to secure the debt. We may also elect to raise additional funds through collaboration, licensing, marketing, or similar arrangements, and these arrangements may require us to relinquish valuable rights to our products or proprietary technologies, or grant licenses that are not favorable to us. If we fail to obtain sufficient additional capital in the future, we could be forced to curtail our growth strategy by reducing or delaying capital expenditures and acquisitions, delaying or postponing our product development efforts, selling assets, restructuring our operations, or refinancing our indebtedness.

From time to time we may become subject to tax audits or similar proceedings, and as a result we may owe additional taxes, interest, and penalties in amounts that may be material.

We are subject to income taxes in many countries, jurisdictions, and provinces, including the United States. In determining our global provision for income taxes, we are required to exercise judgment. Regularly, we make estimates where the ultimate tax determination is uncertain. While we believe our estimates are reasonable, we cannot assure you that the final determination of any tax audit or tax-related litigation will not be materially different from that reflected in our historical income tax provisions and accruals.

In addition, we are subject to sales, use, and similar taxes in many countries, jurisdictions, and provinces, including those states in the United States where we maintain a physical presence or have a substantial nexus. These taxing regimes are complex. For example, in the United States, each state and local taxing authority has its own interpretation of what constitutes a sufficient physical presence or nexus to require the collection and remittance of these taxes. Similarly, each state and local taxing authority has its own rules regarding the applicability of sales tax by customer or product type. We employ a variety of strategies from time to time with respect to our international operations. There can be no assurance that these strategies will be accepted by the relevant taxing authorities.

We have reviewed the tax positions taken, or to be taken, in our tax returns for all tax years currently open to examination by a taxing authority. As of December 31, 2011, the total amount of unrecognized tax benefits, that is the reserve for uncertain tax positions, was approximately $329,000. The assessment of additional taxes, interest, and penalties as a result of audits, litigation, or otherwise, could be materially adverse to our current and future results of operations and financial condition.

Risks Related to the Regulatory Environment

Oversight of the medical device industry might affect the manner in which we may sell medical devices and compete in the marketplace.

There are laws and regulations that govern the means by which companies in the healthcare industry may market their products to healthcare professionals and may compete by discounting the prices of their products, including for example, the federal Anti-Kickback Statute, the federal False Claims Act, the federal Health Insurance Portability and Accountability Act of 1996, state law equivalents to these federal laws that are meant to protect against fraud and abuse and analogous laws in foreign countries. Violations of these laws are punishable by criminal and civil sanctions, including, but not limited to, civil and criminal penalties, damages, fines, exclusion from participation in federal and state healthcare programs, including Medicare and Medicaid. Although we exercise care in structuring our sales and marketing practices and customer discount arrangements to comply with those laws and regulations, we cannot assure you that:

 

   

government officials charged with responsibility for enforcing those laws will not assert that our sales and marketing practices or customer discount arrangements are in violation of those laws or regulations; or

 

28


Table of Contents
   

government regulators or courts will interpret those laws or regulations in a manner consistent with our interpretation.

Correspondingly, federal and state laws are also sometimes open to interpretation, and from time to time we may find ourselves at a competitive disadvantage if our interpretation differs from that of our competitors.

In January 2004, AdvaMed, the principal United States trade association for the medical device industry, put in place a model “code of conduct” that sets forth standards by which its members should abide in the promotion of their products. AdvaMed issued a revised “code of conduct” effective July 1, 2009. We have in place policies and procedures for compliance that we believe are at least as stringent as those set forth in the revised AdvaMed Code, and we provide routine training to our sales and marketing personnel on our policies regarding sales and marketing practices. Nevertheless, the sales and marketing practices of our industry have been the subject of increased scrutiny from federal and state government agencies, and we believe that this trend will continue. For example, recent federal legislation and state legislation would require detailed disclosure of gifts and other remuneration made to health care professionals. In addition, prosecutorial scrutiny and governmental oversight, on the state and federal levels, over device companies regarding the retention of healthcare professionals as consultants has limited the manner in which medical device companies may retain healthcare professionals as consultants. Various hospital organizations, medical societies and trade associations are establishing their own practices that may require detailed disclosures of relationships between healthcare professionals and medical device companies or ban or restrict certain marketing and sales practices such as gifts and business meals.

Our business is subject to complex, costly, and burdensome regulations. We could be subject to significant penalties if we fail to comply.

The production and marketing of our products and our ongoing research and development are subject to extensive regulation and review by numerous governmental authorities both in the United States and abroad. U.S. and foreign regulations applicable to medical devices are wide-ranging and govern, among other things, the testing, marketing, and premarket clearance or approval of new medical devices, in addition to regulating manufacturing practices, reporting, promotion and advertising, importing and exporting, labeling, and record-keeping procedures.

Our failure to comply with applicable regulatory requirements could result in governmental agencies or a court taking action, including any of the following:

 

   

issuing public warning letters to us;

 

   

imposing fines and penalties on us;

 

   

issuing an injunction preventing us from manufacturing or selling our products;

 

   

bringing civil or criminal charges against us;

 

   

delaying the introduction of our new products into the market;

 

   

ordering a recall of, or detaining or seizing, our products; or

 

   

withdrawing or denying approvals or clearances for our products.

If any or all of the foregoing were to occur, our business, results of operations, and reputation could suffer.

If we are not successful in obtaining and maintaining clearances and approvals from governmental agencies, we will not be able to sell our products, and our future growth will be significantly hampered.

Our products require premarket clearance or approval in the United States and the CE Mark or other approvals in foreign countries where they are sold. Each medical device that we wish to market in the United States generally must receive either 510(k) clearance or approval of a premarket application, or PMA, from the

 

29


Table of Contents

FDA before the product can be marketed or sold. Either process can be lengthy and expensive. The FDA’s 510(k) clearance procedure usually takes from three to twelve months from the date the FDA receives the application, but may take significantly longer. Although 510(k) clearances have been obtained for nearly all of our current products that require 510(k) clearances, the FDA may condition, limit or prohibit our sales of these products if safety or effectiveness problems develop with the devices. Our new products or significantly modified marketed products could be denied 510(k) clearance and required to undergo the more burdensome PMA approval process if they are not found to be substantially equivalent.

The PMA approval process is much more costly, lengthy, and uncertain than the premarket notification process. It generally takes from six months to three years from the date the application is submitted to, and filed with, the FDA, and may take even longer. Achieving premarket approval typically requires extensive clinical trials and may require the filing of numerous amendments with the FDA over time. We do not have significant experience in obtaining PMA approval for our products.

The FDA has proposed changes for which FDA clearance to market would possibly require clinical data, more extensive manufacturing information and postmarket data. The FDA is also proposing that an FDA inspection of the manufacturing facility may be required for certain products prior to clearance of the 510(k), which is similar to the requirements of a Class III device. As part of the 510(k) reform, the FDA proposes to issue regulations defining grounds and procedures for rescission of 510(k) applications that have previously been cleared to market. The FDA may also require the more extensive PMA process for certain products. Our ability to market our products outside the United States is also subject to regulatory approval, including our ability to demonstrate the safety and effectiveness of our products in the clinical setting.

Even if regulatory approval or clearance of a product is granted, the approval or clearance could limit the uses or the claims for which the product may be labeled and promoted, which may limit the market for our products. If we do not obtain and maintain foreign regulatory or FDA approval with respect to our products, as applicable, we will not be able to sell our products, and our future growth will be significantly hampered.

Modifications to our marketed devices may require new regulatory clearances or premarket approvals, or may require us to cease marketing or recall the modified devices until clearances or approvals are obtained.

Any modification to a 510(k)-cleared device that could significantly affect its safety or effectiveness, or would constitute a major change as specified by FDA guidelines, requires the submission of another 510(k) or PMA application to address the change. The FDA requires every manufacturer to make its own determination as to whether a modification requires a new 510(k) clearance or PMA. Although in the first instance we may determine that a change does not rise to a level of significance that would require us to make a submission, the FDA may review and disagree with our determination and can require us to submit a 510(k) or a PMA for a significant technological change or major change or modification in intended use. If the FDA requires us to submit a 510(k) or a PMA for any modification to a previously cleared device, we may be required to cease marketing the device, recall it, and not resume marketing until we obtain clearance or approval from the FDA for the modified version of the device. Delays in our receipt of regulatory clearance or approval will cause delays in our ability to sell our products, which could have a negative effect on our business, results of operations, and prospects. Also, we may be subject to regulatory fines, penalties, and/or other sanctions authorized by the Federal Food, Drug, and Cosmetic Act.

If we or some of our suppliers fail to comply with the FDA’s Quality System Regulation and other applicable postmarket requirements, our manufacturing operations could be disrupted, our product sales and profitability could suffer, and we may become subject to a wide variety of FDA enforcement actions.

After a device is placed on the market, numerous regulatory requirements apply. We are subject to inspection and marketing surveillance by the FDA to determine our compliance with all regulatory requirements. If the FDA finds that we have failed to comply with any regulatory requirements, it can institute a wide variety of enforcement actions.

 

30


Table of Contents

We and some of our suppliers must comply with the FDA’s Quality System Regulation, which governs the methods used in, and the facilities and controls used for, the design, testing, manufacture, control, quality assurance, installation, servicing, labeling, packaging, storage, and shipping of medical devices. The FDA enforces the Quality System Regulation through unannounced inspections. We have been, and anticipate in the future being, subject to such inspections. In December 2011 and January 2012, we underwent routine audits from our European Notified Body and the FDA, respectively. Although the results of these inspections were satisfactory, the timing and scope of future audits is unknown and it is possible, despite our belief that our quality systems and the operation of our manufacturing facilities will remain in compliance with U.S, and non-U.S. regulatory requirements, that a future audit may result in one or more unsatisfactory results. If we or one of our suppliers fails a Quality System Regulation inspection, or if a corrective action plan adopted by us or one of our suppliers is not sufficient, the FDA may bring an enforcement action against us, and our operations could be disrupted and our manufacturing delayed.

We are also subject to the FDA’s general prohibition against promoting our products for unapproved or off-label uses and to the medical device reporting, or MDR, regulations that require us to report to the FDA if our products may have caused or contributed to a death or serious injury, or if our device malfunctions and a recurrence of the malfunction would likely result in a death or serious injury. We must also file reports with the FDA of some device corrections and removals, and we must adhere to the FDA’s rules on labeling and promotion. If we fail to comply with these or other FDA requirements or fail to take adequate corrective action in response to any significant compliance issue raised by the FDA, the FDA can take significant enforcement actions, which could harm our business, results of operations, and our reputation.

In addition, most other countries, such as Japan, require us to comply with manufacturing and quality assurance standards for medical devices that are similar to those in force in the United States before marketing and selling our products in those countries. If we fail to comply, we would lose our ability to market and sell our products in those foreign countries.

Even after receiving regulatory clearance or approval, our products may be subject to product recalls, which may harm our reputation and divert managerial and financial resources.

The FDA and similar governmental authorities in other countries have the authority to order mandatory recall of our products or order their removal from the market if the governmental entity finds that our products would cause serious adverse health consequences or death. A government mandated or voluntary recall by us could occur as a result of component failures, manufacturing errors or design defects, including labeling defects. For example, we initiated voluntary recalls of two lots of our AlboGraft vascular graft in October 2011 and February 2012, respectively, in response to customer complaints of a manufacturing defect that compromised the safety of the product. There can be no assurance that these failures will not reoccur or that other problems will not develop in the future. Any future recall of our products may harm our reputation with customers and divert managerial and financial resources.

The adoption of healthcare reform in the United States may adversely affect our business, results of operations and/or financial condition.

In March 2010, significant reforms to the U.S. healthcare system were adopted in the form of the Patient Protection and Affordable Care Act (the PPACA). The PPACA includes provisions that, among other things, reduce and/or limit Medicare reimbursement, require all individuals to have health insurance (with limited exceptions) and impose new and/or increased taxes. Specifically, the law requires the medical device industry to subsidize healthcare reform in the form of a 2.3% excise tax on U.S. sales of most medical devices beginning in 2013. While we are still evaluating the impact of this tax on our overall business, in 2011 this would have equated to an excise tax of approximately $0.9 million. Various healthcare reform proposals have also emerged at the state level. The PPACA and these proposals could reduce medical procedure volumes and impact the demand for our products or the prices at which we sell our products. In addition, the excise tax will increase our cost of doing business. The impact of the PPACA and these proposals could harm our operating results and liquidity.

 

31


Table of Contents

Domestic and foreign legislative or administrative reforms resulting in restrictive reimbursement practices of third-party payors and cost containment measures could decrease the demand for products purchased by our customers, the prices that our customers are willing to pay for those products and the number of procedures using our devices.

Our products are purchased principally by hospitals or physicians which typically bill various third-party payors, such as governmental programs (e.g., Medicare, Medicaid and comparable foreign programs), private insurance plans and managed care plans, for the healthcare services provided to their patients. The ability of our customers to obtain appropriate reimbursement for products and services from third-party payors is critical to the success of our products because it affects which products customers purchase and the prices they are willing to pay. Reimbursement varies by country and can significantly impact the acceptance of new technology. Implementation of healthcare reforms in the United States and in significant overseas markets such as Germany, Japan, France and other countries may limit, reduce or eliminate reimbursement for our products and adversely affect both our pricing flexibility and the demand for our products. Even when we develop or acquire a promising new product, we may find limited demand for the product unless reimbursement approval is obtained from private and governmental third-party payors.

Major third-party payors for hospital services in the United States and abroad continue to work to contain healthcare costs through, among other things, the introduction of cost containment incentives and closer scrutiny of healthcare expenditures by both private health insurers and employers. For example, in an effort to decrease costs, certain hospitals and other customers may resterilize our products intended for a single use or purchase reprocessed products from third-party reprocessors in lieu of purchasing new products from us.

Further legislative or administrative reforms to the reimbursement systems in the United States and abroad, or adverse decisions relating to our products by administrators of these systems in coverage or reimbursement, could significantly reduce reimbursement for procedures using our medical devices or result in the denial of coverage for those procedures. Examples of these reforms or adverse decisions include price regulation, competitive pricing, coverage and payment policies, comparative effectiveness of therapies, technology assessments and managed-care arrangements. Any of such reforms or adverse decisions resulting in restrictive reimbursement practices or denials of coverage could have an adverse impact on the acceptance of our products and the prices that our customers are willing to pay for them.

If we do not comply with foreign regulatory requirements to market our products outside the United States, our business will be harmed.

Sales of medical devices outside the United States are subject to international regulatory requirements that vary from country to country. These requirements and the amount of time required for approval may differ from our experiences with the FDA in the United States. In some cases, we rely on our non-U.S. distributors to obtain premarket approvals, complete product registrations, comply with clinical trial requirements, and complete those steps that are customarily taken in the applicable jurisdictions to comply with governmental and quasi-governmental regulation. In the future, we expect to continue to rely on distributors in this manner in those countries where we continue to market and sell our products through them. Failure to satisfy these foreign regulations would impact our ability to sell our products in these countries and could cause our business to suffer. There can be no assurance that we will be able to obtain or maintain the required regulatory approvals in these countries.

Our products are regulated in the European Union under the European Medical Devices Directive (93/42/EC as amended by 2007/47/EC). In order to market our medical devices in the European Union, we are required to obtain CE mark certification, which denotes conformity to the essential requirements of the Medical Devices Directive. We have received CE mark certification to sell nearly all of our products. However, there can be no assurance that we will be able to obtain a CE mark for new products in the future or for modifications to our existing products or in the manufacturing of our products, and obtaining a CE mark may involve a significant amount of time and expense, stringent clinical and preclinical testing, or modification of our products and could result in limitations being placed on the use of our products in order to obtain approval.

 

32


Table of Contents

Maintaining a CE mark is contingent upon our continued compliance with applicable European medical device requirements, including limitations on advertising and promotion of medical devices and requirements governing the handling of adverse events. There can be no assurance that we will be successful in maintaining the CE mark for any of our current products. In particular, adverse event reporting requirements in the European Union mandate that we report incidents which led or could have led to death or serious deterioration in health. Under certain circumstances, we could be required to or could voluntarily initiate a recall or removal of our product from the market in order to address product deficiencies or malfunctions. For instance, we initiated voluntary recalls of two lots of our AlboGraft vascular graft in October 2011 and February 2012, respectively, in response to customer complaints of a manufacturing defect. Any recall of our products may harm our reputation with customers and divert managerial and financial resources.

Failure to receive or maintain approval would prohibit us from selling these products in member countries of the European Union, and would require significant delays in obtaining individual country approvals. If we do not receive or maintain these approvals, our business could be harmed.

Our manufacturing facilities are subject to periodic inspection by European regulatory authorities and Notified Bodies, and we must demonstrate compliance with the Medical Devices Directive. Our most recent periodic inspection by our European Notified Body was in December 2011. Any failure by us to comply with European requirements in this regard may entail our taking corrective action, such as modification of our policies and procedures. In addition, we may be required to cease all or part of our operations for some period of time until we can demonstrate that appropriate steps have been taken. There can be no assurance that we will be found in compliance with such standards in future audits.

In Japan, the Ministry of Health, Labor and Welfare (the MHLW) regulates medical devices through the Pharmaceutical Affairs Law, which was reformed effective April 1, 2005. The revisions to Japanese regulations have resulted in longer lead times for product development.

Any such delay in product registrations could have a negative impact on our results of operations.

Certain of our products contain materials derived from animal sources and may become subject to additional regulation.

Our AlboGraft Vascular Graft, AlboSure Vascular Patch, and XenoSure Biologic Patch products contain bovine tissue or material derived from bovine tissue. Products that contain materials derived from animal sources, including food, pharmaceuticals and medical devices, are increasingly subject to scrutiny in the media and by regulatory authorities. Regulatory authorities are concerned about the potential for the transmission of disease from animals to humans via those materials. This public scrutiny has been particularly acute in Japan and Western Europe with respect to products derived from animal sources, because of concern that materials infected with the agent that causes bovine spongiform encephalopathy, otherwise known as BSE or mad cow disease, may, if ingested or implanted, cause a variant of the human Creutzfeldt-Jakob Disease, an ultimately fatal disease with no known cure. Cases of BSE in cattle discovered in Canada and the United States have increased awareness of the issue in North America. Certain countries, such as Japan, have issued regulations that require our products be processed from bovine tissue sourced from countries where no cases of BSE have occurred. Products that contain materials derived from animals, including our products, may become subject to additional regulation, or even be banned in certain countries, because of concern over the potential for the transmission of infections agents. Significant new regulation, or a ban of our products, could impair our current business or our ability to expand our business.

Compliance with environmental laws and regulations could be expensive. Failure to comply with environmental laws and regulations could subject us to significant liability.

Our manufacturing operations and our research and development programs involve the use of hazardous substances and are subject to a variety of federal, state, and local environmental laws and regulations relating to

 

33


Table of Contents

the storage, use, discharge, disposal, and remediation of, and human exposure to, hazardous substances. Our research and development and manufacturing operations produce biological waste materials, such as human and animal tissue, and waste solvents, such as isopropyl alcohol. Regulatory authorities permit these operations, and the resulting waste materials are disposed of in material compliance with environmental laws and regulations. Compliance with these laws and regulations is expensive, and non-compliance could result in substantial liabilities, which could exceed our insurance coverage. In addition, our manufacturing operations may result in the release, discharge, emission, or disposal of hazardous substances that could cause us to incur substantial liabilities, including costs for investigation and remediation.

We cannot assure you that violations of these laws and regulations will not occur in the future or have not occurred in the past as a result of human error, accidents, equipment failure, or other causes. The expense associated with environmental regulation and remediation could harm our financial condition and operating results.

Risks Related to Intellectual Property

If we fail to adequately protect our intellectual property rights, or prevent use of our intellectual property by third parties, we could lose a significant competitive advantage and our business may suffer.

Our success depends in part on obtaining, maintaining, and enforcing our patents, trademarks, and other proprietary rights, and our ability to avoid infringing on the proprietary rights of others. We take precautionary steps to protect our technological advantages and intellectual property. We rely upon patent, trade secret, copyright, know-how, and trademark laws, as well as license agreements and contractual provisions, to establish our intellectual property rights and protect our products. These measures may only afford limited protection and may not:

 

   

prevent our competitors from duplicating our products;

 

   

prevent our competitors from gaining access to our proprietary information and technology; or

 

   

permit us to gain or maintain a competitive advantage.

The issuance of a patent is not conclusive as to its validity or enforceability. Any patents we have obtained or will obtain in the future might also be invalidated or circumvented by third parties. In addition, our pending patent applications may not issue as patents or, if issued, may not provide commercially meaningful protection, as competitors may be able to design around our patents to produce alternative, non-infringing designs. Should such challenges to our patents be successful, competitors might be able to market products and use manufacturing processes that are substantially similar to ours.

Additionally, we may not be able to effectively protect our rights in unpatented technology, trade secrets, and confidential information. We have a policy of requiring key employees and consultants and corporate partners with access to trade secrets or other confidential information to execute confidentiality agreements. Our confidentiality agreements also require our employees to assign to us all rights to any inventions made or conceived during their employment with us. We also generally require our consultants to assign to us any inventions made during the course of their engagement by us. There can be no assurance, however, that these agreements will provide meaningful protection or adequate remedies for us in the event of unauthorized use, transfer, or disclosure of confidential information or inventions.

In addition, the laws of foreign countries may not protect our intellectual property rights effectively or to the same extent as the laws of the United States. If our intellectual property rights are not adequately protected, we may not be able to commercialize our technologies, products, or services and our competitors could commercialize similar technologies, which could result in a decrease in our sales and market share.

 

34


Table of Contents

If third parties claim that we infringe upon their intellectual property rights, we may incur liabilities and costs, and we may have to redesign or discontinue selling the affected product.

The medical device industry is litigious with respect to patents and other intellectual property rights. Companies operating in our industry routinely seek patent protection for their product designs, and many of our principal competitors have large patent portfolios. Companies in the medical device industry have used intellectual property litigation to gain a competitive advantage. Whether a product infringes a patent involves complex legal and factual issues, the determination of which is often uncertain. We face the risk of claims that we have infringed on third parties’ intellectual property rights, and we cannot assure you that our products or methods do not infringe the patents or other intellectual property rights of third parties. Our efforts to identify and avoid infringing on third parties’ intellectual property rights may not always be successful. Any claims of patent or other intellectual property infringement, even those without merit, could:

 

   

be expensive and time consuming to defend;

 

   

result in us being required to pay significant damages to third parties for past use of the asserted intellectual property;

 

   

harm our reputation;

 

   

cause us to cease making or selling products that incorporate the challenged intellectual property;

 

   

require us to redesign, reengineer, or rebrand our products, which may not be possible and could be costly and time consuming if it is possible to do so at all;

 

   

require us to enter into royalty or licensing agreements in order to obtain the right to use a third party’s intellectual property, which agreements may not be available on terms acceptable to us or at all;

 

   

divert the attention of our management and key personnel from other tasks important to the success of our business; or

 

   

result in our customers or potential customers deferring or limiting their purchase or use of the affected products until resolution of the litigation.

It is also possible that one of our competitors could claim that our manufacturing process violates an existing patent. If we were unsuccessful in defending such a claim, we may be forced to stop production at one or more of our manufacturing facilities.

In addition, new patents obtained by our competitors could threaten a product’s continued life in the market even after it has already been introduced. If our business is successful, the possibility may increase that others will assert infringement claims against us.

If we believe our product is or may be the subject of a patent with a third party, we attempt to reach a license agreement with them to manufacture, market, and sell these products. If we fail to reach an agreement with a third party patent holder that covers a product we offer, we could be required to pay significant damages to third parties for past use of the asserted intellectual property and may be forced to cease making or selling products that incorporate the challenged intellectual property.

In addition, we may become subject to interference proceedings conducted in the United States Patent Office or opposition proceedings conducted in foreign patent offices challenging the priority of invention or the validity of our patents. For example, in 2005 and 2006, respectively, Boston Scientific Corporation initiated opposition proceedings in the European Patent Office claiming that we were not the first to file a patent application on certain material. As a result of these opposition proceedings, some of our patent claims were canceled.

 

35


Table of Contents

We may become involved in lawsuits and administrative proceedings to protect, defend, or enforce our patents that would be expensive and time consuming.

In order to protect or enforce our patent rights, we may initiate patent litigation or interference or opposition proceedings against third parties in the United States or in foreign countries. The defense of intellectual property rights, including patent rights through lawsuits, interference, or opposition proceedings, and other legal and administrative proceedings can be costly and can divert our technical and management personnel from their normal responsibilities. Such costs increase our operating expenses and reduce our resources available for development activities. An adverse determination of any litigation or defense proceedings could put one or more of our patents at risk of being invalidated or interpreted narrowly and could put our patent applications at risk of not issuing.

Furthermore, because of the substantial amount of discovery required in connection with intellectual property litigation, there is a risk that some of our confidential information could be compromised by disclosure during this type of litigation. For example, during the course of this kind of litigation and despite protective orders entered by the court, confidential information may be inadvertently disclosed in the form of documents or testimony in connection with discovery requests, depositions, or study testimony. This disclosure could materially adversely affect our business and financial results.

If we fail to observe the terms of our agreements or fail to reach agreement with third-party patent holders, we may lose the ability to manufacture, market, or sell some of our products.

Certain aspects of our products are or may be the subject of patents held by third parties. If we believe our product is or may be the subject of a patent with a third party, we attempt to reach a license agreement with them to manufacture, market, and sell these products. These arrangements do or may require us to pay royalties, typically determined as a percentage of our net sales for the underlying product. If we fail to reach agreement with a third party patent holder that covers a product we offer, we could be required to pay significant damages to third parties for past use of the asserted intellectual property and may be forced to cease making or selling products that incorporate the challenged intellectual property. Further, if we enter into a license agreement regarding a third party patent, but we fail to make these payments or otherwise fail to observe the terms of these agreements, we may lose our ability to sell these products.

Risks Related to Our Common Stock

Our stock price may be volatile, and your investment in our common stock could suffer a decline in value.

There has been significant volatility in the market price and trading volume of equity securities that is unrelated to the financial performance of the companies issuing the securities. These broad market fluctuations may negatively affect the market price of our common stock. You may not be able to resell your shares at or above the price at which you purchased them due to fluctuations in the market price of our common stock caused by changes in our operating performance or prospects, a low volume of trading in our common stock, and other factors.

Some specific factors that may have a significant effect on our common stock market price include:

 

   

actual or anticipated fluctuations in our operating results or future prospects;

 

   

our announcements or our competitors’ announcements of new products;

 

   

public concern as to the safety or efficacy of our products;

 

   

the public’s reaction to our press releases, our other public announcements, and our filings with the Securities and Exchange Commission;

 

   

our determination whether or not to continue the payment of quarterly cash dividends;

 

36


Table of Contents
   

our determination whether or not to continue our share repurchase program;

 

   

strategic actions by us or our competitors, such as acquisitions or restructurings;

 

   

changes in our growth rates or our competitors’ growth rates;

 

   

developments regarding our patents or proprietary rights or those of our competitors;

 

   

our inability to raise additional capital;

 

   

changes in financial markets or general economic conditions, including those resulting from war, incidents of terrorism, and responses to such events;

 

   

new laws or regulations or new interpretations of existing laws or regulations applicable to our business;

 

   

changes in accounting standards, policies, guidance, interpretations, or principles;

 

   

light volume of trades of our common stock;

 

   

the discontinuation of a product line or other revenue generating activity, such as our stent grafts;

 

   

adverse regulatory actions which may necessitate recalls of our products or warning letters that negatively affect the markets for our products;

 

   

sales of common stock by us or our directors, officers, or principal stockholders;

 

   

our relatively small public float; and

 

   

changes in stock market analyst recommendations or earnings estimates regarding our common stock, other comparable companies, or our industry generally.

In the past, following periods of volatility in the market price of a company’s securities, securities class action litigation has often been instituted. A securities class action suit against us could result in substantial costs and divert our management’s attention and resources that would otherwise be used to benefit the future performance of our business.

Our directors, officers, and principal stockholders have significant voting power and may take actions that may not be in the best interests of our other stockholders.

Our directors, officers, and affiliated stockholders holding more than 5% of our common stock collectively control almost a majority of our outstanding common stock, assuming the exercise of all options held by such persons. As a result, these stockholders, if they act together, would be able to control the management and affairs of our company and most matters requiring stockholder approval, including the election of directors and approval of significant corporate transactions. This concentration of ownership may have the effect of delaying or preventing a change in control, might adversely affect the market price of our common stock, and may not be in the best interests of our other stockholders.

Future acquisitions that we make may be dilutive to our current stockholders.

We intend to pursue the acquisition of complementary products, technologies, or businesses, and in connection with these acquisitions we may use substantial portions of our available cash or make dilutive issuances of securities. In addition, an acquisition could impair our operating results by causing us to incur debt or requiring us to recognize acquisition expenses or amortize, depreciate, or impair acquired assets. This debt would be senior to our outstanding shares of capital stock upon our liquidation.

 

37


Table of Contents

Our corporate documents and Delaware law contain provisions that could discourage, delay, or prevent a change in control of our company.

Provisions in our amended and restated certificate of incorporation and bylaws may have the effect of delaying or preventing a change of control or changes in our management. These provisions include the following:

 

   

the division of our board of directors into three classes;

 

   

the right of the board of directors to elect a director to fill a vacancy created by the expansion of the board of directors or due to the resignation or departure of an existing board member;

 

   

the prohibition of cumulative voting in the election of directors, which would otherwise allow less than a majority of stockholders to elect director candidates;

 

   

the requirement for the advance notice of nominations for election to the board of directors or for proposing matters that can be acted upon at a stockholders’ meeting;

 

   

the ability of our board of directors to alter our bylaws without obtaining stockholder approval;

 

   

the ability of the board of directors to issue, without stockholder approval, up to 5,000,000 shares of preferred stock with terms set by the board of directors, which rights could be senior to those of our common stock;

 

   

the elimination of the rights of stockholders to call a special meeting of stockholders and to take action by written consent in lieu of a meeting;

 

   

the required approval of at least 75% of the shares entitled to vote at an election of directors to adopt, amend or repeal our bylaws or repeal the provisions of our amended and restated certificate of incorporation regarding the election and removal of directors and the inability of stockholders to take action by written consent in lieu of a meeting; and

 

   

the required approval of at least 75% of the shares entitled to vote at an election of directors to remove directors with cause.

We are also subject to the anti-takeover provisions of Section 203 of the Delaware General Corporation Law. Under these provisions, if anyone becomes an “interested stockholder,” we may not enter into a “business combination” with that person for three years without special approval, which could discourage a third party from making a takeover offer and could delay or prevent a change of control. For purposes of Section 203, “interested stockholder” means, generally, someone owning 15% or more of our outstanding voting stock or an affiliate of ours that owned 15% or more of our outstanding voting stock during the past three years, subject to certain exceptions as described in Section 203.

We have not established a minimum dividend payment level for our common stockholders and there are no assurances of our ability to pay dividends to common stockholders in the future.

In February 2011, our Board of Directors adopted a quarterly dividend program for the purpose of returning capital to our stockholders. However, we have not established a minimum dividend payment level for our common stockholders and our ability to pay dividends may be harmed by the risks and uncertainties described in this Annual Report on Form 10-K and in the other documents we file from time to time with the SEC. Future dividends, if any, will be authorized by our Board of Directors and declared by us based upon a variety of factors deemed relevant by our directors, including, among other things, our financial condition, liquidity, earnings projections and business prospects. In addition, financial covenants in any credit facility to which we become a party may restrict our ability to pay future quarterly dividends. We can provide no assurance of our ability to pay dividends in the future.

 

38


Table of Contents

Our Board of Directors may decide not to continue our share repurchase program.

In July 2009, our Board of Directors authorized the repurchase of up to $1.0 million of our common stock from time to time on the open market or in privately negotiated transactions. In October 2009, our Board of Directors increased this amount to $2.0 million, and in July 2010, our Board of Directors further increased this amount to $5.0 million. In November 2011, our Board of Directors further increased this amount to $10.0 million and extended the program through December 31, 2013. The timing and number of any shares repurchased will be determined based on our evaluation of market conditions and other factors. Repurchases may also be made under a Rule 10b5-1 plan, which would permit shares to be repurchased when we might otherwise be precluded from doing so under insider trading laws. The repurchase program may be suspended or discontinued at any time and will conclude no later than December 31, 2013, unless otherwise extended by our Board of Directors. If the Board of Directors withdraws authority for our share repurchase program, our stock price may be negatively affected.

 

Item 1B. Unresolved Staff Comments

None.

 

Item 2. Properties

Our principal worldwide executive, distribution, and manufacturing operations are located at adjacent 27,098 square foot and 21,929 square foot leased facilities located in Burlington, Massachusetts. In addition, our international operations are headquartered at a 12,841 square foot leased facility located in Sulzbach, Germany, and our Asian operations are located at a 2,140 square foot leased facility located in Tokyo, Japan. In addition, we have an Italian sales office located in a 1,400 square foot leased facility located in Milan, Italy and a Spanish sales office located in an 800 square foot leased facility located in Madrid, Spain.

The leases for our Burlington, Sulzbach, Milan, Madrid, and Tokyo facilities expire in 2017, 2016, 2016, 2013, and 2013, respectively. Based on our current operating plan, we believe our current facilities are adequate.

 

Item 3. Legal Proceedings

In the ordinary course of business, we are from time to time involved in lawsuits, claims, investigations, proceedings, and threats of litigation consisting of intellectual property, commercial and other matters. While the outcome of these proceedings and claims cannot be predicted with certainty, there are no matters, as of December 31, 2011, that, in the opinion of management, might have a material adverse effect on our financial position, results of operations or cash flows.

 

Item 4. Mine Safety Disclosures

Not applicable.

 

39


Table of Contents

PART II

 

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Market Information

Our common stock began trading on The NASDAQ Global Market under the symbol “LMAT” on October 19, 2006. The following table sets forth the high and low sales closing prices of our common stock as reported on The NASDAQ National Market for the eight quarters ending December 31, 2011:

 

     High      Low  

Year ended December 31, 2010:

             

First quarter ended March 31, 2010

   $ 5.11       $ 4.42   

Second quarter ended June 30, 2010

   $ 5.81       $ 4.50   

Third quarter ended September 30, 2010

   $ 7.28       $ 5.19   

Fourth quarter ended December 31, 2010

   $ 7.09       $ 6.03   

Year ended December 31, 2011:

             

First quarter ended March 31, 2011

   $ 7.20       $ 6.62   

Second quarter ended June 30, 2011

   $ 7.18       $ 6.36   

Third quarter ended September 30, 2011

   $ 7.50       $ 6.22   

Fourth quarter ended December 31, 2011

   $ 6.42       $ 5.28   

Holders of Record

On March 21, 2012, the closing price per share of our common stock was $5.80 as reported on The NASDAQ Global Market, and we had approximately 364 stockholders of record. In addition, we believe that a significant number of beneficial owners of our common stock hold their shares in street name.

Dividend Policy

On February 24, 2011, our Board of Directors approved a policy for the payment of quarterly cash dividends on our common stock of $0.02 per share. Future declarations of quarterly dividends and the establishment of future record and payment dates are subject to approval by our Board of Directors on a quarterly basis. The dividend activity for the year ended December 31, 2011 is as follows:

 

Record Date

 

Payment Date

 

Per Share Amount

 

Dividend Payment

            (in thousands)

March 22, 2011

  April 5, 2011   $0.02   $309

May 20, 2011

  June 6, 2011   $0.02   $310

August 19, 2011

  September 6, 2011   $0.02   $310

November 23, 2011

  December 6, 2011   $0.02   $308

On February 23, 2012, our Board of Directors approved a quarterly cash dividend on our common stock of $0.025 per share payable on April 3, 2012, to stockholders of record at the close of business on March 20, 2012, which will total approximately $0.4 million.

Stock Price Performance Graph

Set forth below is a graph comparing the cumulative total stockholder return on LeMaitre’s common stock with the NASDAQ US Composite Index, the NASDAQ Medical Equipment Index and a peer group for the period covering from December 31, 2006, through the end of LeMaitre’s fiscal year ended December 31, 2011.

 

40


Table of Contents

The graph assumes an investment of $100.00 made on December 31, 2006, in (i) LeMaitre’s common stock, (ii) the stocks comprising the NASDAQ US Composite Index, (iii) stocks comprising the NASDAQ Medical Equipment Index, (iv) the stocks comprising our peer group, and (v) the stocks comprising our peer group as presented in the prior year Form 10-K. This graph is not “soliciting material,” is not deemed “filed” with the SEC and is not to be incorporated by reference into any filing of LeMaitre under the Securities Act of 1933, as amended, or the Securities Exchange Act of 1934, as amended, whether made before or after the date hereof and irrespective of any general incorporation language in any such filing.

 

LOGO

 

     12/31/06      12/31/07      12/31/08      12/31/09      12/31/10      12/31/11  

LeMaitre Vascular, Inc

     100.00         103.33         38.47         83.33         112.83         99.91   

NASDAQ Composite

     100.00         110.26         65.65         95.19         112.10         110.81   

NASDAQ Medical Equipment

     100.00         136.67         74.41         101.38         108.94         122.28   

Old Peer Group

     100.00         95.43         70.68         85.58         97.15         88.77   

New Peer Group

     100.00         100.11         80.16         88.07         99.28         96.46   

LeMaitre’s fiscal year ends on the last day of December each year; data in the above table reflects market values for our stock and NASDAQ and peer group indices as of the close of trading on the last trading day of year presented.

The old peer group included the following companies: AngioDynamics, Inc., Cardiovascular Systems Inc., Endologix, Inc., Integra Lifesciences Holdings Corporation, Kensey Nash Corporation, Merit Medical Systems Inc., Spectranetics Corp., and Vascular Solutions, Inc.

The new peer group includes the following companies: AngioDynamics, Inc., Cardiovascular Systems Inc., Cryolife Inc., Endologix, Inc., Integra Lifesciences Holdings Corporation, Merit Medical Systems Inc.,

 

41


Table of Contents

Spectranetics Corp., Synovis Life Technologies Inc., and Vascular Solutions, Inc. This new peer group differs from our old peer group in that we removed Kensey Nash Corporation since it is primarily a medical material manufacturer, and we added Cryolife Inc. and Synovis Life Technologies Inc., who each offer biologic solutions to the medical device industry.

Recent Sales of Unregistered Securities

Not Applicable.

Issuer Purchases of Equity Securities

In the quarter ending December 31, 2011, we repurchased 5,559 shares of our common stock in conjunction with the forfeiture of shares to satisfy the employees’ obligations with respect to withholding taxes in connection with the vesting of shares of restricted stock.

 

     Issuer Purchases of Equity Securities  

Period

   Total Number of
Shares (or Units)
Purchased(1)
     Average Price  Paid
Per

Share (or Unit)
     Total Number of
Shares (or Units)
Purchased as
Part of Publicly
Announced Plans
or Program(2)
     Maximum Number
(or Approximate
Dollar Value) of
Shares (or Units)
that may yet be
Purchased under
the Plans or
Program
 

October 1, 2011 through October 31, 2011

     36,822       $ 6.17         36,822       $ 5,825,665   

November 1, 2011 through November 30, 2011

     58,247       $ 5.59         52,688       $ 5,531,417   

December 1, 2011 through December 31, 2011

     36,793       $ 5.49         36,793       $ 5,329,368   
  

 

 

    

 

 

    

 

 

    

 

 

 

Total

     131,862       $ 5.73         126,303       $ 5,329,368   
  

 

 

    

 

 

    

 

 

    

 

 

 

 

(1) For the three months ended December 31, 2011, we repurchased 5,559 shares of our common stock to satisfy the employees’ obligations with respect to withholding taxes in connection with the vesting of restricted stock units.

 

(2) In July 2009, our Board of Directors authorized the repurchase of up to $1.0 million of our common stock from time to time on the open market or in privately negotiated transactions. In October 2009, our Board of Directors increased this amount to $2.0 million, in July 2010, our Board of Directors further increased this amount to $5.0 million, and in November 2011, our Board of Directors further increased this amount to $10.0 million. The expiration date of this program is December 31, 2013.

 

42


Table of Contents
Item 6. Selected Financial Data

You should read the following selected consolidated financial data in conjunction with our consolidated financial statements and the related notes which are included elsewhere in this Annual Report and the “Management’s Discussion and Analysis of Financial Condition and Results of Operations” section of this Annual Report. We have derived the consolidated statement of operations data for the years ended December 31, 2011, 2010, and 2009 and the consolidated balance sheet data as of December 31, 2011 and 2010, from our audited consolidated financial statements, which are included elsewhere in this Annual Report. We have derived the consolidated statement of operations data for the years ended December 31, 2008 and 2007, and the consolidated balance sheet data as of December 31, 2009, 2008, and 2007 from our audited consolidated financial statements, which are not included in this Annual Report. Our historical results for any prior period are not necessarily indicative of results to be expected for any future period.

 

     Year ended December 31,  
     2011     2010     2009     2008     2007  
     (in thousands, except per share data)  

Consolidated Statements of Operations Data:

          

Net sales

   $ 57,685      $ 56,060      $ 50,908      $ 48,720      $ 41,446   

Cost of sales

     17,458        14,341        13,604        14,817        10,739   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Gross profit

     40,227        41,719        37,304        33,903        30,707   

Operating expenses:

          

Sales and marketing

     19,375        19,409        17,710        19,762        19,443   

General and administrative

     11,228        10,506        9,852        9,999        9,534   

Research and development

     4,425        5,488        5,910        5,328        4,591   

Purchased research and development

     —          —          —          —          373   

Restructuring charges

     2,161        1,816        1,777        1,147        1,042   

Gain on Termination of Distribution Agreement

     (735     —          —          —          —     

Impairment charge

     83        485        106        597        7   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Total operating expenses

     36,537        37,704        35,355        36,833        34,990   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Income (loss) from operations

     3,690        4,015        1,949        (2,930     (4,283

Other income (expense):

          

Interest income

     11        31        38        530        1,299   

Interest expense

     —          (5     (26     (61     (1

Investment impairment

     —          —          —          (168     —     

Foreign currency gain (loss)

     51        (30     280        (139     292   

Other income (expense), net

     —          14        (26     (53     (9
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Total other income

     62        10        266        109        1,581   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Income (loss) before income tax

     3,752        4,025        2,215        (2,821     (2,702

Provision (benefit) for income taxes

     1,609        (1,988     617        493        232   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Net income (loss)

   $ 2,143      $ 6,013      $ 1,598      $ (3,314   $ (2,934
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Net income (loss) per share of common stock:

          

Basic

   $ 0.14      $ 0.38      $ 0.10      $ (0.21   $ (0.19
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Diluted

   $ 0.13      $ 0.37      $ 0.10      $ (0.21   $ (0.19
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Weighted-average shares outstanding:

          

Basic

     15,458        15,627        15,687        15,572        15,398   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Diluted

     15,989        16,114        15,916        15,572        15,398   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Cash dividends declared per common share

   $ 0.08      $ —        $ —        $ —        $ —     
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

 

43


Table of Contents
     December 31,  
     2011      2010      2009      2008      2007  
     (in thousands)  

Consolidated Balance Sheet Data:

              

Cash and cash equivalents

   $ 20,132       $ 22,614       $ 23,192       $ 15,895       $ 6,397   

Marketable securities

     —           —           808         5,359         16,198   

Current assets

     39,687         42,911         39,550         37,116         41,766   

Total assets

     59,687         63,274         56,906         54,399         60,857   

Revolving line of credit and current portion of long-term debt

     —           —           —           —           262   

Current liabilities (excluding revolving line of credit and current portion of long-term debt)

     6,539         10,389         6,548         6,933         9,783   

Long-term liabilities

     1,060         529         2,145         1,718         2,226   

Total liabilities

     7,599         10,918         8,693         8,651         12,271   

Total stockholders’ equity

     52,088         52,356         48,213         45,748         48,586   

 

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

The following discussion should be read in conjunction with our consolidated financial statements and the related notes contained elsewhere in this Annual Report on Form 10-K and in our other Securities and Exchange Commission filings. The following discussion may contain predictions, estimates, and other forward-looking statements that involve a number of risks and uncertainties, including those discussed under “Risk Factors” and elsewhere in this Annual Report on Form 10-K. These risks could cause our actual results to differ materially from any future performance suggested below.

Overview

We are a medical device company that develops, manufactures, and markets medical devices and implants for the treatment of peripheral vascular disease. Our principal product offerings are sold throughout the world, primarily in the United States, the European Union and, to a lesser extent, Japan. We estimate that the annual worldwide market for all peripheral vascular devices approximates $3 billion, within which our core product lines address roughly $750 million. We have grown our business by using a three-pronged strategy: competing in niche markets, expanding our worldwide direct sales force, and acquiring and developing complementary vascular devices. We have used acquisitions as a primary means of further accessing the larger peripheral vascular device market, and we expect to continue to pursue this strategy in the future. Additionally, we have increased our efforts to expand our vascular device offerings through new product development efforts. In 2011, we introduced two new products to the market – the second-generation UnBalloon modeling catheter and the Over-the-Wire Valvulotome. We currently manufacture most of our product lines in our Burlington, Massachusetts, headquarters.

Our products are used by vascular surgeons who treat peripheral vascular disease through both open surgical methods and endovascular techniques. In contrast to interventional cardiologists and interventional radiologists, neither of whom are certified to perform open surgical procedures, vascular surgeons can perform both open surgical and minimally invasive endovascular procedures, and are therefore uniquely positioned to provide a wider range of treatment options to patients.

Below is a listing of our principal product lines and product categories:

 

   

Our Open Vascular product category includes our balloon catheters, carotid shunts, remote endarterectomy devices, valvulotomes, vascular grafts, and vessel closure systems. We also report the results of our distribution of the Xenosure Biologic Patch in this category

 

44


Table of Contents
   

Our Endovascular and Other product category includes our aortic stent grafts, contrast injection device, laparoscopic cholecystectomy devices, non-occlusive modeling catheter, and radiopaque marking tape. We also report the results of our distribution of the Endologix Powerlink System within this category. We divested our aortic stent grafts in June 2011 and terminated our distribution of the Endologix products in August 2011, each of which was previously reported in this product category.

We evaluate the sales performance of our various product lines utilizing criteria that varies based upon the position of each product line in its expected life cycle. For established products, we typically review unit sales and selling prices. For newer or faster growing products, we typically also focus upon new account generation and customer retention.

To assist us in evaluating our business strategies, we regularly monitor long-term technology trends in the peripheral vascular device market. Additionally, we consider the information obtained from discussions with the medical community in connection with the demand for our products, including potential new product launches. We also use this information to help determine our competitive position in the peripheral vascular device market and our manufacturing capacity requirements.

Our business opportunities include the following:

 

   

the long-term growth of our sales force in North America, Europe and Japan, sometimes in connection with terminations of certain distributor relationships in order to expand our sales presence in new countries;

 

   

the addition of complementary products through acquisitions;

 

   

the updating of existing products and introduction of new products through research and development; and

 

   

the introduction of our products in new markets upon obtainment of regulatory approvals in these markets.

We are currently pursuing each of these opportunities.

We sell our products primarily through a direct sales force. As of December 31, 2011 our sales force was comprised of 78 sales representatives in North America, the European Union and Japan. We also sell our products in other countries through distributors. Our worldwide headquarters is located in Burlington, Massachusetts. Our international operations are headquartered in Sulzbach, Germany. We also have sales offices located in Tokyo, Japan, Madrid, Spain, and Milan, Italy. In 2011, approximately 93% of our net sales were generated in markets in which we employ direct sales representatives.

In recent years we have experienced comparatively greater success in product markets characterized by low or limited competition, for example the market for valvulotome devices. In these markets, we believe that we have been able to increase selling prices without compromising market share. There can be no assurance that we will not meet resistance to increased selling prices in the future. In contrast, we have experienced comparatively lesser success in highly competitive product markets such as such as prosthetic polyester and ePTFE grafts, where we face stronger competition from larger companies with greater resources. While we believe that these challenging market dynamics can be mitigated by our strong relationships with our vascular surgeon customers, there can be no assurance that we will be successful in highly competitive markets.

Because we believe that direct-to-hospital sales engender closer customer relationships, and allow for higher selling prices and gross margins, we periodically enter into transactions with our distributors to transition their sales of our medical devices to our direct sales organization:

 

   

In December 2010, we entered into a definitive agreement with Cardiva, S.L. to terminate its distribution of our products in Spain effective as of June 30, 2011. The agreement required us to pay approximately $1.2 million in exchange for this early termination, the purchase of their customer list

 

45


Table of Contents
 

for our products, certain customer contracts, their provision of sales and marketing services, and $0.3 million of inventory.

 

   

In December 2010, we entered into a definitive agreement with Marcom Medical ApS to terminate its distribution of our products in Denmark effective as of June 30, 2011. The agreement required us to pay approximately $0.2 million in exchange for this early termination, the purchase of their customer list for our products, certain customer contracts, their provision of sales and marketing services, and minimal inventory.

We anticipate that the expansion of our direct sales organization to Spain, and to a lesser extent, Denmark may result in increased sales and marketing expenses during 2012.

Our strategy for growing our business includes the acquisition of complementary product lines and companies and occasionally the discontinuance or divestiture of products or activities that are no longer complementary:

 

   

In June 2010, we divested our OptiLock Implantable Port to Minvasive Ltd. for $0.2 million.

 

   

In November 2010, we acquired our LifeSpan ePTFE Vascular Graft from Angiotech Pharmaceuticals, Inc. for $2.8 million and related assets from Edwards LifeSciences for $1.2 million.

 

   

In June 2011, we divested our TAArget and UniFit stent grafts to Duke Vascular, Inc. for $0.6 million. In addition, Duke Vascular, Inc. assumed our future obligations for the associated UNITE and ENTRUST clinical trials.

 

   

In August 2011, we terminated our distribution of Endologix’s aortic stent graft products in Europe in exchange for $1.3 million.

In addition to relying upon acquisitions to grow our business, we also rely on our product development efforts to bring differentiated technology and next-generation products to market. These efforts have led to the following recent product launches:

 

   

In June 2010, we launched the AnastoClip GC Vessel Closure System.

 

   

In November 2011, we launched the second-generation of The UnBalloon Non-Occlusive Modeling Catheter.

 

   

In December 2011, we launched the Over-The-Wire LeMaitre Valvulotome.

In addition to our sales growth strategies, we have also executed several operational initiatives designed to consolidate and streamline manufacturing within our Burlington, MA facilities. We expect that these plant consolidations will yield improved control over our production capacity and our direct labor force as well as reduce redundant costs over the long-term. Our most recent manufacturing transitions included:

 

   

In October 2010, we adopted a reorganization plan that was designed to eliminate redundant costs resulting from our 2007 acquisition of Biomateriali and to improve efficiencies in manufacturing operations. We have completed the transition of AlboGraft vascular graft manufacturing to our existing corporate headquarters in Burlington, Massachusetts.

 

   

In May 2011, we adopted a reorganization plan that was designed to eliminate redundant costs resulting from our 2010 acquisition of the LifeSpan vascular graft and to improve efficiencies in manufacturing operations. We have largely completed this transition to our existing corporate headquarters in Burlington, Massachusetts.

Our execution of these business opportunities may affect the comparability of our financial results from period to period and may cause substantial fluctuations from period to period, both due to restructuring and similar non-recurring charges, as well as longer term impacts to revenues and operating expenditures. For example, we recognized $4.0 million of revenue on our stent graft products during the year ended December 31, 2011, and also incurred sales, marketing, and research and development expenditures in connection with these product lines. We expect that we will no longer recognize any further revenue or expenses from those product

 

46


Table of Contents

lines, as we have exited the stent graft market. In connection with that exit, we realized a gain of approximately $0.7 million as a result of the Endologix transaction. As another example, we recognized $1.1 million and $1.8 million of restructuring expenses in 2011 and 2010, respectively, related to the Biomateriali plant closure and relocation to Burlington, MA.

Fluctuations in the rate of exchange between the U.S. dollar and foreign currencies, primarily the Euro, affect our financial results. For the year ended December 31, 2011, approximately 36% of our sales were from outside the Americas. We expect that foreign currencies will continue to represent a similarly significant percentage of our sales in the future. Selling, marketing, and administrative costs related to these sales are largely denominated in the same respective currency, thereby partially mitigating our transaction risk exposure. We therefore believe that the risk of a significant impact on our operating income from foreign currency fluctuations is moderated. However, most of our foreign sales are denominated in local currency, and if there is an increase in the rate at which a foreign currency is exchanged for U.S. dollars, it will require more of the foreign currency to equal a specified amount of U.S. dollars than before the rate increase. In such cases we will receive less in U.S. dollars than we did before the rate increase went into effect. The following table indicates the impact of foreign currency fluctuations and changes to our business activities for each of our quarters during the three most recently completed fiscal years:

 

(amounts in thousands)   2011     2010     2009  
    Q4     Q3     Q2     Q1     Q4     Q3     Q2     Q1     Q4     Q3     Q2     Q1  

Total net sales

    13,411        14,564        15,112        14,598        14,431        13,656        14,158        13,815        13,584        13,346        12,630        11,348   

Impact of currency exchange rate fluctuations(1)

    15        431        669        10        (420     (418     (336     314        613        (215     (699     (622

Net impact of acquisitions and distributed sales, excluding currency exchange rate fluctuations(2)

    260        319        335        328        156        —          —          95        397        333        234        101   

Net impact of discontinued products, excluding currency rate fluctuations(3)

    (1,904     (370     (76     (45     (100     (105     (65     —          —          —          —          —     

 

(1) Represents the impact of the change in foreign exchange rates compared to the corresponding quarter of the prior year based on the weighted average exchange rate for each quarter.

 

(2) Represents the impact of new sales of acquired products or businesses and newly distributed sales of other manufacturers’ during the current year period, measured for 12 months following the date of the event or transaction.

 

(3) Represents the impact of sales related to discontinued and divested products, and discontinued distributed sales of other manufacturers’ products, during the comparable prior period, measured for 12 months following the date of the event or transaction.

Upon our divestiture of the stent graft product lines, we reorganized our product categories from “Vascular”, “Endovascular”, and “General Surgery” to “Open Vascular” and “Endovascular and Other” as we re-focused our portfolio and sales channel on open vascular products. Our consolidated financial statements and the related management discussion and analysis for the years ended December 31, 2011, 2010, and 2009 have been reclassified to reflect this change.

Net Sales and Expense Components

The following is a description of the primary components of our net sales and expenses:

Net sales. We derive our net sales from the sale of our products, less discounts and returns. Net sales includes the shipping and handling fees paid for by our customers. Most of our sales are generated by our direct sales force and are shipped and billed to hospitals or clinics throughout the world. In countries where we do not have a direct sales force, sales are primarily generated by shipments to distributors who, in turn, sell to hospitals and clinics. In those cases where our products are held on consignment at a hospital or clinic, we generate sales at the time the product is used in surgery rather than at shipment.

 

47


Table of Contents

Cost of sales. We manufacture nearly all of the products that we sell. Our cost of sales consists primarily of manufacturing personnel, raw materials and components, depreciation of property and equipment, and other allocated manufacturing overhead, as well as freight expense we pay to ship products to customers.

Sales and marketing. Our sales and marketing expense consists primarily of salaries, commissions, stock based compensation, travel and entertainment, attendance at medical society meetings, training programs, advertising and product promotions, direct mail, and other marketing costs.

General and administrative. General and administrative expense consists primarily of executive, finance and human resource expense, stock based compensation, legal and accounting fees, information technology expense, intangible amortization expense, and insurance expense.

Research and development. Research and development expense includes costs associated with the design, development, testing, enhancement, and regulatory approval of our products, principally salaries, laboratory testing, and supply costs. It also includes costs associated with design and execution of clinical studies, regulatory submissions and costs to register, maintain, and defend our intellectual property, and royalty payments associated with licensed and acquired intellectual property.

Restructuring. Restructuring expense includes costs directly associated with distribution agreement termination expenses, severance and retention costs for terminated employees, factory relocation costs, and other expenses associated with restructuring our operations.

Other income (expense). Other income (expense) primarily includes interest income and expense, investment impairment charges, foreign currency gains (losses), and other miscellaneous gains (losses).

Income tax expense. We are subject to federal and state income taxes for earnings generated in the United States, which include operating losses in certain foreign jurisdictions for certain years depending on tax elections made, and foreign taxes on earnings of our wholly-owned German, French, Italian, Spanish, and Japanese subsidiaries. Our consolidated tax expense is affected by the mix of our taxable income (loss) in the United States, Germany, France, Italy, Spain, and Japan, permanent items, discrete items, unrecognized tax benefits, and amortization of goodwill for U.S tax reporting purposes.

Results of Operations

Comparison of the year ended December 31, 2011, to the year ended December 31, 2010

The following tables set forth, for the periods indicated, our results of operations and the change between the specified periods expressed as a percent increase or decrease:

 

     2011      2010      $ Change     Percent
change
 
     ($ in thousands)  

Net sales

   $ 57,685       $ 56,060       $ 1,625        3

Net sales by product category:

          

Open Vascular

   $ 44,408       $ 40,022       $ 4,386        11

Endovascular and Other

     13,277         16,038         (2,761     (17 %) 
  

 

 

    

 

 

    

 

 

   

 

 

 

Total

   $ 57,685       $ 56,060       $ 1,625        3
  

 

 

    

 

 

    

 

 

   

 

 

 

Net sales by geography:

          

Americas

   $ 36,958       $ 34,575       $ 2,383        7

International

     20,727         21,485         (758     (4 %) 
  

 

 

    

 

 

    

 

 

   

 

 

 

Total

   $ 57,685       $ 56,060       $ 1,625        3
  

 

 

    

 

 

    

 

 

   

 

 

 

 

48


Table of Contents

Net sales. Net sales increased 3% to $57.7 million in 2011 from $56.1 million in 2010. Sales in our Open Vascular product category grew 11%, while sales in our Endovascular and Other product category decreased by 17% from the previous year. Acquisitions, primarily the LifeSpan vascular graft, increased sales 2% compared to 2010. Divestitures, primarily of the TAArget and UniFit stent graft product lines as well as the termination of the Endologix aortic stent graft distribution agreement, decreased sales 4% from the prior year. Changes in foreign currency exchange rates added 2% to year over year sales growth.

Sales increases in 2011 were largely driven by higher average selling prices across nearly all product lines, as well as stronger sales of our Open Vascular products, primarily biologic patches of $0.9 million, catheters of $0.6 million and vessel closure systems of $0.5 million, in addition to full-year LifeSpan vascular graft sales and favorable changes in foreign currency exchange rates. These gains were partially offset by a $2.8 million decrease in our Endovascular and Other product category, primarily due to the decline of, and subsequent exit from, stent grafts, as well as unit decreases in a number of open vascular products.

Direct-to-hospital net sales were 93% in 2011 and 2010.

Net sales by geography. Net sales in the Americas increased $2.4 million to $37.0 million in 2011. The increase was largely the result of higher average selling prices across nearly all product lines as well as increased sales of biologic patches and vessel closure systems. International net sales decreased to $20.7 million in 2011. The decrease was primarily driven by the divestitures of the TAArget and UniFit stent graft product lines and the termination of the Endologix aortic stent graft distribution agreement. Sales of these products decreased to $4.0 million in 2011 compared to $6.8 million in 2010. The decrease in international sales was partially offset by full-year LifeSpan sales of $1.2 million and $1.1 million of favorable changes in foreign currency exchange rates.

International direct-to-hospital net sales were 82% in 2011 and 2010.

 

     2011     2010     $ Change     Percent
change
 
     ($ in thousands)  

Gross profit

   $ 40,227      $ 41,719      $ (1,492     (4 %) 

Gross margin

     69.7     74.4     *        (4.7 %) 

 

* Not applicable

Gross profit. Gross profit decreased 4% to $40.2 million in 2011 from $41.7 million in 2010, while our gross margin decreased 4.7% to 69.7%. The gross margin decrease was the result of manufacturing inefficiencies in Burlington, Massachusetts largely related to the AlboGraft product line and its transfer from Italy to the United States, as well as a $0.2 million charge related to a voluntary recall of two AlboGraft production lots in the fourth quarter of 2011. The gross margin decrease was partially offset by higher average selling prices across nearly all product lines and improved product mix due to the termination of the Endologix distribution agreement.

 

     2011     2010      $ change     Percent
change
    2011 as a %
of Revenue
    2010 as a %
of Revenue
 
     ($ in thousands)  

Sales and marketing

   $ 19,375      $ 19,409       $ (34     0     34     35

General and administrative

     11,228        10,506         722        7     19     19

Research and development

     4,425        5,488         (1,063     (19 %)      8     10

Restructuring charges

     2,161        1,816         345        19     4     3

Gain on termination of distribution agreement

     (735     —           (735     *        *        *   

Impairment charge

     83        485         (402     *        *        *   
  

 

 

   

 

 

    

 

 

   

 

 

   

 

 

   

 

 

 
   $ 36,537      $ 37,704       $ (1,167     (3 %)      63     67
  

 

 

   

 

 

    

 

 

   

 

 

   

 

 

   

 

 

 

 

* Not a meaningful percentage.

 

49


Table of Contents

Sales and marketing. Sales and marketing expenses were $19.4 million in 2011, flat versus 2010. As a percentage of net sales, sales and marketing expenses were 34% in 2011, down 1% from the prior year. Compared to 2010, sales and marketing expenses were negatively affected by increases in foreign currency exchange rates of $0.5 million, transition services related to business development activities of $0.3 million, and recruiting expenses of $0.2 million, which were offset by a decrease in sales personnel compensation of $1.0 million. At December 31, 2011, we employed 78 sales representatives worldwide, compared to 67 in the prior year period. We plan to increase the size of our sales force in 2012, though to a lesser extent than 2011, and we expect that selling and marketing expenses will increase commensurately.

General and administrative. General and administrative expense increased 7% to $11.2 million in 2011 from $10.5 million in 2010. The increase was largely the result of higher administrative costs associated with our French and Spanish subsidiaries of $0.5 million, higher amortization costs of $0.3 million related to the LifeSpan Vascular Graft acquisition and our Spanish distributor buy-out, and changes in foreign currency exchange rates of $0.2 million, partially offset by a reduction in administrative costs associated with our closure of the Biomateriali subsidiary of $0.2 million. As a percentage of net sales, general and administrative expenses were 19% in both 2011 and 2010. We expect general and administrative expenses to increase primarily related our direct sales efforts in Spain for all of 2012 versus six months in 2011.

Research and development. Research and development expenses decreased 19% to $4.4 million in 2011 from $5.5 million in 2010. As a percentage of net sales, research and development expenses decreased to 8% in 2011 from 10% in 2010. The decrease was largely driven by a reduction in regulatory and clinical affairs costs of $0.8 million in 2011, related to the suspension of our UNITE and ENTRUST trials in October 2010. In addition, product development costs decreased $0.4 million in 2011 as we reduced animal testing associated with new products approvals. On June 30, 2011, Duke Vascular, Inc. assumed all future obligations of the UNITE and ENTRUST trials as part of our stent graft divestiture agreement. Process engineering expenses increased by $0.2 million in 2011 as we increased staffing levels. We expect research and development costs to increase marginally in 2012 as we continue to invest in new product development efforts.

Restructuring. Restructuring charges were $2.2 million in 2011 compared to $1.8 million in 2010. In 2010, we commenced the closure of our Biomateriali manufacturing facility in Brindisi, Italy and the related transition of production to our existing corporate headquarters in Burlington, Massachusetts. In 2011, we incurred an additional $1.1 million in restructuring charges related to this project. These charges consisted of approximately $0.3 million for the transfer of manufacturing equipment, $0.1 million of charges associated with repayment of a development grant and loan from the Italian government, and $0.7 million related to deferred rent charges upon exiting the Biomateriali facility in March 2011. In March 2012, we completed the Biomateriali liquidation and dissolution process.

In 2010, we incurred a $1.8 million restructuring charge related to the closure of our Biomateriali manufacturing facility in Brindisi, Italy, and the related transition of production to our existing corporate headquarters in Burlington, Massachusetts. The restructuring charge consisted of $1.4 million of employee-related severance charges, $0.3 million of charges associated with repayment of a development grant and loan from the Italian government, and $0.1 million of charges related to the abandonment of fixed assets and legal fees.

In May 2011, we adopted a reorganization plan (the LifeSpan Plan) that was designed to eliminate redundant costs resulting from our 2010 acquisition of the LifeSpan vascular graft and to improve efficiencies in our manufacturing operations. We have transitioned the production of our LifeSpan vascular graft from Laguna Hills, California to our existing corporate headquarters in Burlington, Massachusetts. The LifeSpan Plan resulted in the termination of 7 employees at the Laguna Hills facility, relocation of manufacturing equipment, and the hiring of approximately 4 employees to staff the required functions in Burlington. We incurred approximately $0.1 million related to the closure of the Laguna Hills facility and the related relocation of the manufacturing equipment during the year ended December 31, 2011. We incurred approximately $33,000 of severance charges related to this project during year ended December 31, 2011.

 

50


Table of Contents

On June 30, 2011, we terminated our relationship with our Spanish distributor resulting in a contract termination charge of $0.5 million which we recorded as restructuring charges. On June 30, 2011, we terminated our relationship with our Danish distributor resulting in a contract termination charge of $0.1 million which we recorded as restructuring charges.

In July 2011, we adopted a reorganization plan of our European administrative and stent graft sales personnel as a result of our exit from the stent graft business. We terminated 6 employees and recorded severance charges of $0.3 million during the year ended December 31, 2011. The final severance payments were made in March 2012.

In 2010 and 2011, we initiated a series of strategic initiatives including the transition of AlboGraft manufacturing from Italy to Burlington, the transition of LifeSpan manufacturing from California to Burlington, the sale of our TAArget and Unifit assets, the termination of our Endologix distribution agreement in Europe, and the termination of our distributors in Spain and Denmark. These initiatives are largely complete, and we do not expect them to incur additional restructuring or impairment charges in 2012.

Gain on termination of distribution agreement. In July 2011, we terminated our Endologix distribution agreement for $1.3 million, and recognized a gain of $0.7 million as a result of the transaction.

Impairment charges. We incurred $0.1 million of impairment charges in 2011 related to patents deemed to have no value based on future expected economic benefits. We incurred $0.5 million of impairment charges in 2010 of which $0.4 million was due to the write-down of certain technology, customer lists, and fixed assets related to our aortic stent graft product line. Additionally, we incurred a $0.1 million impairment charge associated with a Biomateriali private label customer relationship, which we subsequently terminated.

Other income (expense). Foreign exchange gains for 2011 were $51,000 compared to foreign exchange losses for 2010 of $30,000 in 2010. Foreign exchange gains were due to the comparative weakening of the U.S. dollar versus the euro during the year. Net interest income and other income (expense) was comparatively flat in 2011 versus 2010.

Income tax expense. We recorded a provision for taxes of $1.6 million on pre-tax income of $3.8 million in 2011 compared to a tax benefit of $2.0 million on pre-tax income of $4.0 million in 2010. The 2011 provision was comprised of Federal tax in the United States of $1.1 million, taxes in certain foreign subsidiaries that are profitable of $0.4 million and state taxes of $0.1 million. The 2010 benefit was primarily due to the release of our U.S. deferred tax asset valuation allowance of $3.3 million, and was partially offset by U.S. deferred provision of $0.9 million, taxes in certain foreign subsidiaries that are profitable of $0.2 million, Federal tax in the United States of $0.1 million, and state taxes of $0.1 million. The valuation allowance reversal was to the result of achieving three year cumulative profitability which occurred in the fourth quarter of 2010 as well as our expectation of future taxable income in the United States. Our effective tax rate differed from the U.S. statutory tax rate in 2011 principally due to permanent items, true-up of historical deferred tax assets, a valuation allowance recorded against foreign deferred tax assets and state credits, change in our reserve for uncertain tax positions, and state taxes. While it is often difficult to predict the final outcome or timing of the resolution of any particular tax matter, we believe that our tax reserves reflect the probable outcome of known contingencies.

We have assessed the need for a valuation allowance against our deferred tax assets and concluded that as of December 31, 2011, we will continue to carry a valuation allowance against $4.4 million of deferred tax assets, principally foreign net operating loss carry-forwards, which based on the weight of available evidence, we believe it is more likely than not that such assets will not be realized.

We expect that our effective tax rate will decrease slightly in 2012 due to a reduction to foreign taxes and we will be able to utilize Federal research and development tax credits to reduce our regular tax to the alternative minimum tax rate.

 

51


Table of Contents

Comparison of the year ended December 31, 2010, to the year ended December 31, 2009

The following tables set forth, for the periods indicated, our results of operations and the change between the specified periods expressed as a percent increase or decrease:

 

     2010      2009      $ Change     Percent
change
 
     ($ in thousands)  

Net sales

   $ 56,060       $ 50,908       $ 5,152        10

Net sales by product category:

          

Open Vascular

   $ 40,022       $ 34,265       $ 5,757        17

Endovascular and Other

     16,038         16,643         (605     (4 %) 
  

 

 

    

 

 

    

 

 

   

 

 

 

Total

   $ 56,060       $ 50,908       $ 5,152        10
  

 

 

    

 

 

    

 

 

   

 

 

 

Net sales by geography:

          

Americas

   $ 34,575       $ 29,420       $ 5,155        18

International

     21,485         21,488         (3     *   
  

 

 

    

 

 

    

 

 

   

 

 

 

Total

   $ 56,060       $ 50,908       $ 5,152        10
  

 

 

    

 

 

    

 

 

   

 

 

 

 

* Not a meaningful percentage.

Net sales. Net sales increased 10% to $56.1 million in 2010 from $50.9 million in 2009. Sales in our Open Vascular product category grew 17%, while sales in our Endovascular and Other product category decreased by 4% from the previous year. Foreign currency exchange rates subtracted 2% from year over year sales growth. Sales increases in 2010 were largely driven by higher average selling prices across nearly all product lines, as well as stronger sales of our Open Vascular products which included increased sales of valvulotomes of $1.7 million, biologic patches of $1.1 million, and carotid shunts of $0.8 million. These gains were partially offset by a $0.3 million decrease in our Endovascular and Other product category, primarily due to decreased TAArget and UniFit stent graft sales of $0.7 million. Sales were unfavorably impacted by the effect of currency exchange rate fluctuations by $0.9 million.

TAArget and UniFit stent graft sales declined by 21% in 2010 compared to the prior year. The results were due mainly to the retirement of our largest stent graft customer in the fourth quarter of 2009, a reduction in sales to a distributor in Greece, and strong competitor product offerings. We suspended our clinical trials and ceased development efforts related to these products in November 2010.

Direct-to-hospital net sales were 93% in 2010, up from 92% in 2009. The increase was primarily due to the conversion of our AlboGraft Vascular Graft from a distribution model to a direct sales model in March 2009, resulting in an additional three months of direct sales in 2010.

Net sales by geography. Net sales in the Americas increased $5.2 million to $34.6 million in 2010. The increase was mainly the result of higher average selling prices, increased biologic patch sales of $1.1 million, and strong results across nearly all of our Vascular product offerings. International net sales of $21.5 million were flat in 2010. International sales were favorably impacted by a $1.6 million increase in Vascular products sales, led by vascular graft and valvulotome sales, as well as a $0.4 million increase in Powerlink System sales. International sales were unfavorably impacted by the effect of currency exchange rate fluctuations of $0.9 million and a $0.7 million decrease in sales of our own aortic stent grafts and a $0.3 million decrease in sales to the one private label customer of our Biomateriali subsidiary. In January 2011, we terminated our relationship with this customer, who purchased $0.1 million of dacron-related products in 2010.

 

52


Table of Contents

International direct-to-hospital net sales were 82% in 2010, down from 83% in 2009.

 

     2010     2009     $ Change      Percent
change
 
     ($ in thousands)  

Gross profit

   $ 41,719      $ 37,304      $ 4,415         12

Gross margin

     74.4     73.3     *         1.1

 

* Not applicable

Gross profit. Gross profit increased 12% to $41.7 million in 2010 from $37.3 million in 2009, while our gross margin increased 1.1% to 74.4%. The gross margin increase was largely the result of improved manufacturing efficiencies in our Burlington facility, higher average selling prices across nearly all product lines, particularly in the United States, and favorable geographic sales mix versus the prior year. The gross margin increase was partially offset by an increase in excess and obsolete inventory write-downs of $0.5 million, manufacturing start-up costs associated with the transfer of AlboGraft Vascular Graft manufacturing to our Burlington, Massachusetts headquarters, and sales growth in our comparatively lower margin polyester grafts and distributed products.

 

     2010      2009      $ change     Percent
change
    2010 as a %
of Revenue
    2009 as a %
of Revenue
 
     ($ in thousands)  

Sales and marketing

   $ 19,409       $ 17,710       $ 1,699        10     35     35

General and administrative

     10,506         9,852         654        7     19     19

Research and development

     5,488         5,910         (422     (7 %)      10     12

Restructuring charges

     1,816         1,777         39        2     3     3

Impairment charge

     485         106         379        *        *        *   
  

 

 

    

 

 

    

 

 

   

 

 

   

 

 

   

 

 

 
   $ 37,704       $ 35,355       $ 2,349        7     67     69
  

 

 

    

 

 

    

 

 

   

 

 

   

 

 

   

 

 

 

 

* Not a meaningful percentage.

Sales and marketing. Sales and marketing expense increased 10% to $19.4 million in 2010, from $17.7 million in 2009. Selling expenses increased $1.7 million to $16.3 million while marketing expenses remained relatively flat. Changes in foreign currency exchange rates reduced sales and marketing expense by $0.3 million compared to the prior year. Selling expense increases were largely driven by higher commission costs of $1.5 million and higher base compensation costs of $0.5 million, partly due to additional sales representatives. As a percentage of net sales, sales and marketing expenses were 35% in 2010, comparable to the prior year. At the end of 2010, we employed 67 sales representatives worldwide, as compared to 61 at the end of 2009.

General and administrative. General and administrative expense increased 7% to $10.5 million in 2010 from $9.9 million in 2009. The increase was largely the result of higher personnel costs of $0.9 million, and was partially offset by a decrease in professional services of $0.2 million and changes in foreign currency exchange rates of $0.1 million. As a percentage of net sales, general and administrative expenses were 19% in both 2010 and 2009.

Research and development. Research and development expenses decreased 7% to $5.5 million in 2010 from $5.9 million in 2009. As a percentage of net sales, research and development expense decreased to 10% in 2010 from 12% in 2009. The decrease was driven primarily by a reduction of regulatory and clinical affairs costs of $0.4 million to $2.0 million in 2010, largely due to reduced animal testing as well as a reduction in the use of outside services following the suspension of enrollment of our UNITE and ENRUST trials in October 2010. Expenses related to product development and royalties remained consistent between 2010 and 2009.

 

53


Table of Contents

Restructuring. Restructuring charges were $1.8 million in 2010 and 2009. In 2010, we incurred a $1.8 million restructuring charge related to the closure of our Biomateriali manufacturing facility in Brindisi, Italy, and the related transition of production to our existing corporate headquarters in Burlington, Massachusetts. The restructuring charge consisted of $1.4 million of employee-related severance charges, $0.3 million of charges associated with repayment of a development grant and loan from the Italian government, and $0.1 million of charges related to the abandonment of fixed assets and legal fees.

In 2009, we incurred a $1.8 million restructuring charge related to the March 27, 2009 termination of our AlboGraft Vascular Graft distribution agreement with Edwards Lifesciences. The transaction included the payment of $3.5 million in exchange for the termination of the distribution agreement, as well as the acquisition of detailed customer information, transition services, and remaining product inventory.

Impairment charges. We incurred $0.5 million of impairment charges in 2010 of which $0.4 million was due to the write-down of certain technology, customer lists, and fixed assets related to our aortic stent graft product line. As of December 31, 2010, we determined that impairment indicators existed as a result of our decision to suspend enrollment into our UNITE and ENTRUST clinical trials and cease product development efforts in October 2010. The residual fair value of the TAArget and UniFit intangible assets was $0.2 million as of December 31, 2010. Additionally, we incurred a $0.1 million impairment charge associated with a Biomateriali private label customer relationship, which we subsequently terminated. We incurred $0.1 million of impairment charges in 2009 related to patents deemed to have no value based on future expected economic benefits.

Other income (expense). Foreign exchange losses for 2010 were $30,000 compared to foreign exchange gains of $0.3 million in 2009. Foreign exchange gains were due to the comparative strengthening of the dollar versus the euro during the year. Net interest income and other income (expense) was relatively flat between 2010 and 2009.

Income tax expense. We recorded a tax benefit of $2.0 million in 2010 compared to a tax expense of $0.6 million in 2009, on pre-tax income of $4.0 million in 2010 and $2.2 million in 2009. The 2010 benefit was primarily due to the release of our U.S. deferred tax asset valuation allowance of $3.3 million, and was partially offset by U.S. deferred provision of $0.9 million, taxes in certain foreign subsidiaries that are profitable of $0.2 million, federal tax in the United States of $0.1 million, and state taxes of $0.1 million. The valuation allowance reversal was to the result of achieving three year cumulative profitability which occurred in the fourth quarter of 2010 as well as our expectation of future taxable income in the U.S. The 2009 provision was comprised of taxes on profits on certain of our foreign subsidiaries that are profitable, deferred tax liabilities related to the amortization of goodwill for U.S. tax purposes which could not be used to reduce existing deferred tax assets, and the alternative minimum tax. Our effective tax rate differed from the U.S. statutory tax rate in 2010 principally due to the reversal of the valuation allowance on certain deferred tax assets and utilization of U.S net operating loss carryforwards. While it is often difficult to predict the final outcome or timing of the resolution of any particular tax matter, we believe that our tax reserves reflect the probable outcome of known contingencies.

Liquidity and Capital Resources

At December 31, 2011, our cash, cash equivalents and marketable securities were $20.1 million as compared to $22.6 million at December 31, 2010. Our cash and cash equivalents are highly liquid investments with maturities of 90 days or less at the date of purchase and consist of money market funds, and are stated at cost, which approximates fair value. We did not hold any marketable securities nor any mortgage asset-backed or auction-rate securities in our investment portfolio as of December 31, 2011. In the event of a temporary decline in market value, we have the intent and ability to hold our investments for a sufficient period of time to allow for recovery of the principal amounts invested. We continually monitor the asset allocation of our holdings in an attempt to mitigate our credit and interest rate exposures, and we intend to continue to closely monitor developments in the credit markets and make appropriate changes to our investment policy as necessary.

 

54


Table of Contents

Operating and Capital Expenditure Requirements

We require cash to pay our operating expenses, make capital expenditures, fund acquisitions, and pay our long-term liabilities. Since our inception, we have funded our operations through private and public placements of equity securities, short-term borrowings, and funds generated from our operations.

For the year ended December 31, 2011, we recognized operating income of $3.7 million. For the year ended December 31, 2010, we recognized operating income of $4.0 million. Although it is our intention to generate an operating profit on an ongoing basis, excluding the impact of acquisitions, divestitures and distributor terminations, there can be no assurance that we will generate an operating profit in the future due to our continued investment in growing our business. We expect to fund any increased costs and expenditures from our existing cash and cash equivalents and marketable securities, though our future capital requirements depend on numerous factors. These factors include, but are not limited to, the following:

 

   

the revenues generated by sales of our products;

 

   

payments associated with potential future quarterly cash dividends to our common stockholders;

 

   

payments associated with our stock repurchase plan;

 

   

payments associated with U.S income taxes;

 

   

the costs associated with expanding our manufacturing, marketing, sales, and distribution efforts;

 

   

the rate of progress and cost of our research and development activities;

 

   

the costs of obtaining and maintaining FDA and other regulatory clearances of our existing and future products;

 

   

the effects of competing technological and market developments; and

 

   

the number, timing, and nature of acquisitions and other strategic transactions

Our cash balances may decrease as we continue to use cash to fund our operations, make acquisitions, make purchases under our share repurchase program, make payments under our quarterly dividend program, and make deferred payments related to prior acquisitions. We believe that our cash, cash equivalents, investments and the interest we earn on these balances will be sufficient to meet our anticipated cash requirements for at least the next twelve months. If these sources of cash are insufficient to satisfy our liquidity requirements beyond the next twelve months, we may seek to sell additional equity or debt securities or borrow from a financial institution. The sale of additional equity and debt securities may result in dilution to our stockholders. If we raise additional funds through the issuance of debt securities, such securities could have rights senior to those of our common stock and could contain covenants that would restrict our operations. We may require additional capital beyond our currently forecasted amounts. Any such required additional capital may not be available on reasonable terms, if at all.

Italian loan and grant

As part of the purchase of Biomateriali S.r.l, we assumed a loan from the Italian government under a program that provides funding to certain businesses in Italy through a combination of grants and loans if certain requirements are met. The loan was stated to be payable in ten annual payments through 2018 of principal and interest at an interest rate of 0.74%. The present value of the loan was recorded as of the date the proceeds were received using our incremental borrowing rate. Interest was being imputed on the loan and the amortization was recorded as interest expense. The Italian government informed us the loan and grant will become due in full as a result of the Biomateriali S.r.l plant closure. As a result, in December 2011, we incurred approximately $0.1 million of restructuring charges related to additional interest and penalties charges, and we made the final payment to the Italian government of $0.5 million in December 2011. In 2010, we had previously recorded approximately $0.3 million of restructuring charges related to the expected repayment of the grants, the imputed interest on the outstanding loan balance, and certain additional interest and penalties.

 

55


Table of Contents

Cash Flows

 

     Year ended December 31,     Net
Change
 
         2011             2010        

Cash and cash equivalents

   $ 20,132      $ 22,614      $ (2,482

Cash flows provided by (used in):

      

Operating activities

   $ 3,170      $ 7,052      $ (3,882

Investing activities

     (1,822     (5,235     3,413   

Financing activities

     (3,800     (2,335     (1,465

Operating activities. Net cash provided by operating activities was $3.2 million in 2011 and consisted of $2.1 million in net income, adjusted for non-cash items of $5.3 million (including depreciation and amortization of $2.0 million, provision for deferred income taxes of $1.1 million, stock-based compensation of $1.0 million, provision for inventory write-offs of $1.0 million, and noncash restructuring charges of $0.7 million, all of which were partially offset by a gain on the termination of the Endologix distribution agreement of $0.7 million), and net cash used by changes in working capital of $4.2 million. The net cash used by changes in working capital was principally the result of a decrease in accounts payables as well as an increase in accounts receivable, inventories and other current assets.

Net cash provided by operating activities was $7.1 million in 2010 and consisted of $6.0 million in net income, adjusted for non-cash items of $1.5 million (including depreciation and amortization of $1.4 million, stock-based compensation of $1.0 million, provision for inventory write-offs of $0.8 million, impairment charges of $0.5 million and $0.1 million in accounts receivable loss provisions and was partially offset by a deferred income tax benefit of $2.4 million) and net cash used by changes in working capital of $0.4 million. The net cash used by changes in working capital was principally the result of an increase of accounts receivable, inventories and other current assets while partially offset by increased accounts payable.

Investing activities. Net cash used in investing activities was $1.8 million in 2011. This was due to the purchase of new property and equipment of $2.0 million, as a result of the transfer of manufacturing from Brindisi, Italy and Laguna Hills, California to Burlington, Massachusetts and $1.2 million of acquisition related payments, primarily related to the LifeSpan Vascular Graft acquisition and the Spanish and Danish distributor buyouts. These cash uses were partially offset by a $1.3 million distribution termination payment from Endologix.

Net cash used in investing activities was $5.2 million in 2010. This was primarily due to payments related to our acquisition of the LifeSpan Vascular ePTFE Graft of $3.5 million and purchases of property and equipment of $2.5 million, and was partially offset by sales and maturities of marketable securities of $0.8 million.

Financing activities. Net cash used in financing activities was $3.8 million in 2011. This was primarily due to the purchase of $1.9 million of treasury stock under our stock repurchase plan, payment of a common stock dividends of $1.2 million, and the purchase of $0.3 million of treasury stock to cover minimum withholding taxes of restricted stock unit vestings and was partially offset by $0.1 million received from the exercise of stock options. As of December 31, 2011, we were able to purchase up to an additional $5.3 million of common stock under our stock repurchase plan through December 31, 2013.

Net cash used in financing activities was $2.3 million in 2010. This was primarily due to the purchase of $2.2 million of treasury stock under our stock repurchase plan and the purchase of $0.3 million of treasury stock to cover minimum withholding taxes of restricted stock unit vestings and was partially offset by $0.1 million received from the exercise of stock options.

Dividends. On February 24, 2011, our Board of Directors approved a policy for the payment of quarterly cash dividends on our common stock of $0.02 per share. Future declarations of quarterly dividends and the

 

56


Table of Contents

establishment of future record and payment dates are subject to approval by our Board of Directors on a quarterly basis. The dividend activity for the year ended December 31, 2011 is as follows:

 

Record Date

  

Payment Date

  

Per Share Amount

  

Dividend Payment

               (in thousands)

March 22, 2011

   April 5, 2011    $ 0.02    $ 309

May 20, 2011

   June 6, 2011    $ 0.02    $ 310

August 19, 2011

   September 6, 2011    $ 0.02    $ 310

November 23, 2011

   December 6, 2011    $ 0.02    $ 308

On February 23, 2012, our Board of Directors approved a quarterly cash dividend on our common stock of $0.025 per share payable on April 3, 2012, to stockholders of record at the close of business on March 20, 2012, which will total approximately $0.4 million.

Contractual obligations. Our principal contractual obligations consist of operating leases and inventory purchase commitments. The following table summarizes our commitments to settle contractual obligations as of December 31, 2011:

 

Contractual obligations

   Total      Less
than
1 year
     1-3
years
     3-5
years
     More
than
5 years
 
              
              
     (in thousands)  

Operating leases

   $ 4,375       $ 1,083       $ 1,588       $ 1,242       $ 462   

Purchase commitments for inventory

     6,279         2,209         1,931         2,139         —     
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

Total contractual obligations

   $ 10,654       $ 3,292       $ 3,519       $ 3,381       $ 462   
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

The commitments under our operating leases consist primarily of lease payments for our Burlington, Massachusetts, corporate headquarters and manufacturing facility, expiring in 2017; our Sulzbach, Germany office, expiring in 2016; our Tokyo, Japan office, expiring in 2013; and our Milan, Italy office, expiring in 2016. They also include automobile and equipment leases.

The purchase commitments for inventory are to be used in operations over the normal course of business and do not represent excess commitments or loss contracts.

Critical Accounting Policies and Estimates

We have adopted various accounting policies to prepare our consolidated financial statements in accordance with U.S. generally accepted accounting principles (GAAP). Our most significant accounting policies are described in note 1 to our consolidated financial statements included elsewhere in this Annual Report on Form 10-K. The preparation of our consolidated financial statements in conformity with GAAP requires us to make estimates and assumptions that affect the amounts reported in our consolidated financial statements and accompanying notes. Our estimates and assumptions, including those related to bad debts, inventories, intangible assets, sales returns and discounts, and income taxes are reviewed on an ongoing basis and updated as appropriate. Actual results could differ from those estimates.

Certain of our more critical accounting policies require the application of significant judgment by management in selecting the appropriate assumptions for calculating financial estimates. By their nature, these judgments are subject to an inherent degree of uncertainty. These judgments are based on our historical experience, terms of existing contracts, and observance of trends in the industry, as appropriate. Different, reasonable estimates could have been used in the current period. Additionally, changes in accounting estimates are reasonably likely to occur from period to period. Both of these factors could have a material impact on the presentation of our financial condition, changes in financial condition, or results of operations.

 

57


Table of Contents

We believe that the following financial estimates and related accounting policies are both important to the portrayal of our financial condition and results of operations and require subjective or complex judgments. Further, we believe that the items discussed below are properly recorded in our consolidated financial statements for all periods presented. Management has discussed the development, selection and disclosure of our most critical financial estimates with the audit committee of our board of directors and our independent registered public accounting firm. The judgments about those financial estimates are based on information available as of the date of our consolidated financial statements. Those financial estimates and related policies include:

Revenue Recognition

Our revenue is derived primarily from the sale of disposable or implantable devices used during vascular surgery. We sell directly to hospitals and to distributors, as described below, and, during the periods presented in our consolidated financial statements, entered into consigned inventory arrangements with either hospitals or distributors on a limited basis.

We recognize revenue when four basic criteria are met: (1) persuasive evidence of an arrangement exists; (2) delivery has occurred or services have been rendered; (3) the fee is fixed or determinable; and (4) collectability is reasonably assured. We generally use customer purchase orders or contracts to determine the existence of an arrangement. Substantially all sales transactions are based on prices that are determinable at the time that the customer’s purchase order is accepted by us. In order to determine whether collection is reasonably assured, we assess a number of factors, including past transaction history with the customer and the creditworthiness of the customer. If we determine that collection is not reasonably assured, we would defer the recognition of revenue until collection becomes reasonably assured, which is generally upon receipt of payment. We provide for product returns at the time revenue is recognized based on our historical return product history. Based on these policies, we recognize revenue, net of allowances for returns and discounts, as products are shipped, based on shipping point terms, or at the time consigned inventory is consumed at which time title passes to customers. We recognize revenue net of allowances for returns and discounts, at the time of shipment of our products to our distributors.

Accounts Receivable

Our accounts receivable are with customers based in the United States and internationally. Accounts receivable generally are due within 30 to 90 days of invoice and are stated at amounts due from customers, net of an allowance for doubtful accounts and sales returns, other than in certain European markets where longer payment terms are customary and may range from 90 to 240 days. We perform ongoing credit evaluations of the financial condition of our customers and adjust credit limits based upon payment history and the current creditworthiness of the customers, as determined by a review of their current credit information. We continuously monitor aging reports, collections, and payments from customers, and maintain a provision for estimated credit losses based upon historical experience and any specific customer collection issues we identify.

We closely monitor outstanding receivables for potential collection risks, including those that may arise from economic conditions, in both the U.S. and international economies. Our European sales to government-owned or supported customers such as hospitals, distributors and agents, in Southern Europe, specifically Italy, Spain and Greece may be subject to significant payment delays due to government austerity measures impacting funding and payment practices. As of December 31, 2011 our receivables in Italy, Spain and Greece totaled $1.2 million, $0.2 million and $0.2 million, respectively. Receivables balances with certain publicly-owned hospitals and government supported customers in these countries can accumulate over a period of time and then subsequently be settled as large lump sum payments. While we believe our allowance for doubtful accounts in these countries is adequate as of December 31, 2011, if significant changes were to occur in the payment practices of these European governments or if government funding becomes unavailable, we may not be able to collect on receivables due to us from these customers and our write offs of uncollectible amounts may increase.

 

58


Table of Contents

We write off accounts receivable when they become uncollectible. While such credit losses have historically been within our expectations and allowances, we cannot guarantee the same credit loss rates will be experienced in the future. The allowance for doubtful accounts is our best estimate of the amount of probable credit losses in our existing accounts receivable. We review our allowance for doubtful accounts on a monthly basis and all past due balances are reviewed individually for collectability. The provision for the allowance for doubtful accounts is recorded in general and administrative expenses.

Inventory

Inventory consists of finished products, work-in-process, and raw materials. We value inventory at the lower of cost or market value. Cost includes materials, labor, and manufacturing overhead and is determined using the first-in, first-out (FIFO) method. On a quarterly basis, we review inventory quantities on hand and analyze the provision for excess and obsolete inventory based primarily on product expiration dating and our estimated sales forecast, which is based on sales history and anticipated future demand. Our estimates of future product demand may not be accurate, and we may understate or overstate the provision required for excess and obsolete inventory. Accordingly, any significant unanticipated changes in demand could have a significant impact on the value of our inventory and results of operations.

Stock-based Compensation

We recognize, as expense, the estimated fair value of stock options to employees which is determined using the Black-Scholes option pricing model. We have elected to recognize the compensation cost of all share-based awards on a straight-line basis over the vesting period of the award. In periods that we grant stock options, fair value assumptions are based on volatility, interest, dividend yield, and expected term over which the stock options will be outstanding. The computation of expected volatility is based on the historical volatility of the company’s stock. The interest rate for periods within the contractual life of the award is based on the U.S. Treasury risk-free interest rate in effect at the time of grant. The expected lives of the options were estimated using the simplified method for “plain vanilla” options. Computation of expected forfeitures is based on historical forfeiture rates of our share-based awards.

We also issue restricted stock units (RSUs) as an additional form of equity compensation to our employees, officers, and directors, pursuant to our stockholder-approved 2006 Plan. RSUs entitle the grantee to an issuance of stock at no cost and generally vest over a period of time determined by our Board of Directors at the time of grant based upon the continued service to the company. The fair market value of the award is determined based on the number of RSUs granted and the market value of our common stock on the grant date and is amortized to expense over the period of vesting. Computation of expected forfeitures is based on historical forfeiture rates of our share-based awards. Unvested RSUs are forfeited and canceled as of the date that employment or service to the company terminates. RSUs are settled in shares of our common stock upon vesting. We may repurchase common stock upon our employees’ vesting in RSUs in order to cover any minimum tax withholding liability as a result of the RSUs having vested.

We used an expected forfeiture rate of approximately 16%, 16%, and 16% for 2011, 2010, and 2009, respectively. Share-based compensation charges are recorded net of the estimated forfeitures and will be adjusted in future periods to reflect the results of actual forfeitures and vesting. Share-based compensation charges are recorded across the consolidated statement of operations based upon the grantee’s primary function.

As disclosed more fully in the notes to our consolidated financial statements, we recorded expense of approximately $1.1 million in connection with share-based payment awards for the year ended December 31, 2011. The future expense of non-vested share-based awards of approximately $2.3 million is to be recognized over a weighted-average period of 3.2 years. During 2011, we granted stock options at a weighted average fair value of $7.07 and restricted stock units with weighted average fair value of $7.10.

 

59


Table of Contents

Valuation of Goodwill, Other Intangibles

Goodwill represents the amount of consideration paid in connection with business acquisitions in excess of the fair value of assets acquired and liabilities assumed. Goodwill is evaluated for impairment annually or more frequently if indicators of impairment are present or changes in circumstances suggest that an impairment may exist. We evaluate the December 31 balance of the carrying value of goodwill based on a single reporting unit annually. We perform an assessment of qualitative factors to determine if it is “more likely than not” that the fair value of our reporting unit is less than its carrying value as a basis for determining whether it is necessary to perform the two-step goodwill impairment test. The “more likely than not” threshold is defined as having a likelihood of more than 50 percent. If required, the next step of the goodwill impairment test is to determine the fair value of the reporting unit. The implied fair value of goodwill is determined on the same basis as the amount of goodwill recognized in connection with a business combination. Specifically, the fair value of a reporting unit is allocated to all of the assets and liabilities (including any unrecognized intangible assets) as if the reporting unit had been acquired in a business combination as of the date of the impairment review and as if the fair value of the reporting unit was the price paid to acquire the reporting unit. The excess of the fair value of a reporting unit over the amounts assigned to its assets and liabilities is the implied fair value of goodwill. If the carrying amount of the reporting unit goodwill exceeds the implied fair value of that goodwill, an impairment loss shall be recognized in an amount equal to that excess. Goodwill was $11.9 million as of December 31, 2011 and 2010. Our annual impairment testing indicated no significant risk of impairment based upon changes in value that are reasonably likely to occur. However, changes in these estimates and assumptions could materially affect the estimated fair value of our reporting unit.

Other intangible assets consist primarily of purchased developed technology, patents, customer relationships, and trademarks and are amortized over their estimated useful lives, ranging from 1 to 15 years. We review intangible assets quarterly to determine if any adverse conditions exist for a change in circumstances has occurred that would indicate impairment. Conditions that may indicate impairment include, but are not limited to, a significant adverse change in legal factors or business climate that could affect the value of the asset, a change in the operating cash flows associated with the asset, or adverse action or assessment by a regulator. If an impairment indicator exists we test the intangible asset for recoverability. If the carrying value of the intangible asset exceeds the undiscounted cash flows expected to result from the use and eventual disposition of the intangible asset, we will write the carrying value down to the fair value in the period identified. We generally calculate fair value of our intangible assets as the present value of estimated future cash flows we expect to generate from the asset using a risk-adjusted discount rate. In determining our estimated future cash flows associated with our intangible assets, we use estimates and assumptions about future revenue contributions, cost structures, and remaining useful lives of the asset. These estimates and assumptions require significant judgment and actual results may differ from assumed or estimated amounts. Other intangible assets, net of accumulated amortization, were $3.0 million as of December 31, 2011, and $3.7 million as of December 31, 2010. We recognized impairment charges on our intangible assets of $0.1 million in 2011, $0.5 million in 2010, and $0.1 million in 2009.

Contingencies

In the normal course of business, we are subject to proceedings, lawsuits, and other claims and assessments for matters related to, among other things, patent infringement, business acquisitions, employment, and product recalls. We assess the likelihood of any adverse judgments or outcomes to these matters as well as potential ranges of probable losses. A determination of the amount of reserves required, if any, for these contingencies is made after careful analysis of each individual issue. The required reserves may change in the future due to new developments in each matter or changes in approach such as a change in settlement strategy in dealing with these matters. We record charges for the costs we anticipate incurring in connection with litigation and claims against us when we determine a loss is probable and we can reasonably estimate these costs. During the years ended December 31, 2011, 2010, and 2009, we were not subject to any material litigation, claims or assessments.

 

60


Table of Contents

Restructuring

We record restructuring charges incurred in connection with consolidation or relocation of operations, exited business lines, or distributor terminations. These restructuring charges, which reflect our commitment to a termination or exit plan that will begin within twelve months, are based on estimates of the expected costs associated with site closure, legal matters, contract terminations, or other costs directly related to the restructuring. If the actual cost incurred exceeds the estimated cost, an additional charge to earnings will result. If the actual cost is less than the estimated cost, a credit to earnings will be recognized.

Income Taxes

As part of the process of preparing our consolidated financial statements we are required to determine our income taxes in each of the jurisdictions in which we operate. This process involves estimating our actual current tax expense together with assessing temporary differences resulting from recognition of items for income tax and accounting purposes. These differences result in deferred tax assets and liabilities, which are included within our consolidated balance sheet. We must then assess the likelihood that our deferred tax assets will be recovered from taxable income during the carryback period or in the future; and to the extent we believe that recovery is not likely, we must establish a valuation allowance. To the extent we establish a valuation allowance or increase this allowance in a period, we must reflect this increase as an expense within the tax provision in the statement of operations. We do not provide for income taxes on undistributed earnings of foreign subsidiaries, as our current intention is to permanently reinvest these earnings.

We recognize, measure, present and disclose in our financial statements, uncertain tax positions that we have taken or expect to take on a tax return. We operate in multiple taxing jurisdictions, both within the United States and outside of the United States and may be subject to audits from various tax authorities regarding transfer pricing, the deductibility of certain expenses, intercompany transactions, and other matters. Within specific countries, we may be subject to audit by various tax authorities operating within the country and may be subject to different statutes of limitation expiration dates. Management’s judgment is required in determining our provision for income taxes, our deferred tax assets and liabilities, liabilities for uncertain tax positions, and any valuation allowance recorded against our net deferred tax assets. We will continue to monitor the realizability of our deferred tax assets and adjust the valuation allowance accordingly. We have recorded a valuation allowance on our net deferred tax assets of $4.4 million and $4.3 million as of December 31, 2011 and 2010, respectively.

Marketable Securities

We consider all highly liquid investments with maturities of 90 days or less at the time of purchase to be cash equivalents, and investments with maturities of greater than 90 days at the time of purchase to be marketable securities. The unrealized gains (losses) on available-for-sale securities are recorded in accumulated other comprehensive income (loss). When a marketable security incurs a significant unrealized loss for a sustained period of time, we review the instrument to determine if it is other-than-temporarily impaired. If we conclude an instrument is other-than-temporarily impaired, we record the unrealized loss in the consolidated statement of operations. We did not hold any marketable securities as of December 31, 2011 and December 31, 2010.

Recent Accounting Pronouncements

In May 2011, the Financial Accounting Standards Board (FASB) amended existing rules covering fair value measurement and disclosure to clarify guidance and minimize differences between U.S. generally accepted accounting principles (GAAP) and International Financial Reporting Standards (IFRS). The new guidance requires us to provide information about valuation techniques and unobservable inputs used in Level 3 fair value measurements and provide a narrative description of the sensitivity of Level 3 measurements to changes in unobservable inputs. The guidance is effective on January 1, 2012. We do not expect that the adoption of this standard will have a material impact on our results of operations or financial position.

 

61


Table of Contents

In June 2011, new guidance was issued pertaining to the presentation of comprehensive income. The new rule eliminates the current option to report other comprehensive income and its components in the statement of changes in equity. The standard is intended to provide a more consistent method of presenting non-owner transactions that affect the company’s equity. Under the new guidance, an entity can elect to present items of net income and other comprehensive income in one continuous statement or in two separate, but consecutive, statements. The new guidance is effective for fiscal years that begin after December 15, 2011. We do not expect that the adoption of this standard will have a material impact on our results of operations or financial position.

In September 2011, the FASB issued new authoritative guidance pertaining to the testing of goodwill for impairment which allows an entity to first assess qualitative factors to determine whether it is necessary to perform the two-step quantitative goodwill impairment test. Under this new guidance, an entity would not be required to calculate the fair value of a reporting unit unless the entity determines, based on a qualitative assessment, that it is more likely than not that its fair value is less than its carrying amount. The changes are effective for annual and interim goodwill impairment tests performed for fiscal years beginning after December 15, 2011; however, early adoption is permitted. We adopted the new authoritative guidance in the fourth quarter of 2011 in connection with our annual impairment test. The adoption of this standard did not have a material impact on our results of operations or financial position.

Off-Balance Sheet Arrangements

We did not have any off-balance sheet arrangements as of December 31, 2011. We do not currently have, nor have we ever had, any relationships with unconsolidated entities or financial partnerships, such as entities often referred to as structured finance or special purpose entities, which would have been established for the purpose of facilitating off-balance sheet arrangements or other contractually narrow or limited purposes. In addition, we do not engage in trading activities involving non-exchange traded contracts. As a result, we are not materially exposed to any financing, liquidity, market, or credit risk that could arise if we had engaged in these relationships.

 

Item 7A. Quantitative and Qualitative Disclosures About Market Risk

This item is not applicable to us as a smaller reporting company.

 

Item 8. Financial Statements and Supplementary Data

See the consolidated financial statements filed as part of this Annual Report on Form 10-K as listed under Item 15 below.

 

Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

Not Applicable.

 

Item 9A. Controls and Procedures

Evaluation of Disclosure Controls and Procedures

Based on their evaluation as of December 31, 2011, our Chief Executive Officer and Chief Financial Officer, with the participation of management, have concluded that our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) of the Securities Exchange Act of 1934) were effective at reasonable assurance levels.

 

62


Table of Contents

Management’s Report on Internal Control Over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act) to provide reasonable assurance regarding the reliability of our financial reporting and the preparation of financial statements for external purposes in accordance with U.S. generally accepted accounting principles.

Management assessed the effectiveness of our internal controls over financial reporting as of December 31, 2011. Management based its assessment on criteria established in the Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission. Management’s assessment included evaluation of elements such as the design and operating effectiveness of key financial reporting controls, process documentation, accounting policies, and our overall control environment.

Based on this assessment under the criteria set forth in the Internal Control — Integrated Framework, management has concluded that our internal control over financial reporting was effective as of December 31, 2011.

Pursuant to Item 308 of Regulation S-K, this management’s report on internal control over financing reporting shall not be deemed filed for purposes of Section 18 of the Exchange Act or otherwise subject to the liabilities of that section.

Changes in Internal Control over Financial Reporting

There was no change in the our internal control over financial reporting that occurred during the fiscal quarter ended December 31, 2011, that has materially affected, or is reasonably likely to materially affect our internal control over financial reporting.

Inherent Limitations of Internal Controls

Our management, including our Chief Executive Officer and Chief Financial Officer, does not expect that our disclosure controls and procedures or our internal controls will prevent all error and all fraud. A control system, no matter how well conceived and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within the company have been detected. These inherent limitations include the realities that judgments in decision-making can be faulty, and that breakdowns can occur because of simple error or mistake. Additionally, controls can be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the control. The design of any system of controls also is based in part upon certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions. Over time, control may become inadequate because of changes in conditions, or the degree of compliance with the policies or procedures may deteriorate. Because of the inherent limitations in a cost-effective control system, misstatements due to error or fraud may occur and not be detected.

 

Item 9B. Other Information

Not Applicable.

 

63


Table of Contents

PART III

The information responsive to this item is incorporated by reference herein from the information to be contained in our 2012 definitive proxy statement (the “2012 Definitive Proxy Statement”) for the 2012 annual meeting of stockholders to be filed with the Securities and Exchange Commission within 120 days after the year ended December 31, 2011.

 

Item 10. Directors, Executive Officers and Corporate Governance

The information responsive to this item is incorporated by reference herein from the information to be contained in the sections entitled “Directors, Executive Officers and Key Employees,” “Corporate Governance,” and “Meeting and Committees of the Board of Directors” in our 2012 definitive proxy statement (the “2012 Definitive Proxy Statement”) for the 2012 annual meeting of stockholders to be filed with the Securities and Exchange Commission within 120 days after the year ended December 31, 2011.

The information required by this item concerning compliance with Section 16(a) of the Exchange Act is incorporated herein by reference from the information contained in the section entitled “Section 16(a) Beneficial Ownership Reporting Compliance” in our 2012 Definitive Proxy Statement.

Code of Ethics

Certain documents relating to our corporate governance, including our Code of Business Conduct and Ethics, which is applicable to our directors, officers, and employees, and the charters of the Audit Committee, Compensation Committee, and Corporate Governance and Nominating Committee of our Board of Directors, are available on our website at http://www.lemaitre.com. We intend to disclose substantive amendments to or waivers (including implicit waivers) of any provision of the Code of Business Conduct and Ethics that apply to our principal executive officer, principal financial officer, principal accounting officer, or controller, or persons performing similar functions, by posting such information on our website available at http://www.lemaitre.com.

 

Item 11. Executive Compensation

The information responsive to this item is incorporated herein by reference from the information to be contained in the section entitled “Compensation of Executive Officers and Directors” in our 2012 Definitive Proxy Statement.

 

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

The information responsive to this item is incorporated herein by reference from the information to be contained in the section entitled “Security Ownership of Certain Beneficial Owners and Management” in our 2012 Definitive Proxy Statement.

 

64


Table of Contents

Equity Compensation Plan Information

The following table sets forth information regarding our equity compensation plans in effect as of December 31, 2010. Each of our equity compensation plans is an “employee benefit plan” as defined by Rule 405 of Regulation C of the Securities Act of 1933.

 

Plan category

   Number of securities
to be issued upon
exercise of
outstanding options,
warrants and rights
     Weighted-average
exercise price of
outstanding
options, warrants
and rights
     Number of
securities remaining
available for future
issuance under
equity
compensation plans
(excluding
securities reflected
in column (a))
 
     (a)      (b)      (c)  

Equity compensation plans approved by security holders

     2,347,124       $ 5.43         1,210,715   

Equity compensation plans not approved by security holders

     —           —           —     
  

 

 

    

 

 

    

 

 

 

Total

     2,347,124       $ 5.43         1,210,715   
  

 

 

    

 

 

    

 

 

 

 

Item 13. Certain Relationships and Related Transactions, and Director Independence

The information required responsive to this item is incorporated herein by reference from the information to be contained in the sections entitled “Certain Relationships and Related Transactions” and “Corporate Governance” in our 2012 Definitive Proxy Statement.

 

Item 14. Principal Accounting Fees and Services

The information responsive to this item is incorporated herein by reference from the information to be contained in the section entitled “Ratification of Independent Registered Public Accounting Firm” in our 2012 Definitive Proxy Statement.

 

65


Table of Contents

PART IV

 

Item 15. Exhibits and Financial Statement Schedules

 

a) Documents filed as part of this Report.

 

  (1) The following consolidated financial statements are filed herewith in Item 8 of Part II above.

 

  (i) Report of Independent Registered Public Accounting Firm

 

  (ii) Consolidated Balance Sheets

 

  (iii) Consolidated Statements of Operations

 

  (iv) Consolidated Statements of Changes in Stockholders’ Equity and Comprehensive Income (Loss)

 

  (v) Consolidated Statements of Cash Flows

 

  (vi) Notes to Consolidated Financial Statements

 

  (2) Financial Statement Schedules

 

  (3) Exhibits

 

Exhibit
Number

  

Exhibit Description

   Incorporated By Reference       
      Form    Date      Number      Filed
Herewith
  3.1    Amended and Restated By-laws of the Registrant    S-1/A      5/26/06         3.1      
  3.2    Second Amended and Restated Certificate of Incorporation of the Registrant    10-K      3/29/10         3.2      
  4.1    Specimen Certificate evidencing shares of common stock    S-1/A      6/22/06         4.1      
10.1    Northwest Park Lease dated March 31, 2003, by and between the Registrant and Roger P. Nordblom and Peter C. Nordblom, as Trustees of Northwest Associates, as amended    S-1      4/25/06         10.1      
10.2    Registration Rights Agreement dated June 17, 1998, by and between the Registrant and Housatonic Equity Investors, L.P.    S-1/A      5/26/06         10.2      
10.5    License Agreement dated February 11, 1992, by and between United States Surgical Corporation and Spinnaker R&D Associates, as amended    S-1      4/25/06         10.5      
10.6    Side Letter Agreement dated January 30, 2004, by and between the Registrant and Spinnaker R&D Associates    S-1      4/25/06         10.6      
10.7†    Executive Retention and Severance Agreement dated October 10, 2005, by and between the Registrant and George W. LeMaitre    S-1/A      5/26/06         10.7      
10.8†    Managing Director Employment Agreement dated October 1, 2008, by and between LeMaitre Vascular GmbH and Peter Gebauer, as amended    10-K      3/31/09         10.8      
10.9†    Employment Agreement dated June 20, 2006, by and between the Registrant and David Roberts    S-1/A      6/22/06         10.24      
10.10†    Employment Agreement dated April 20, 2006, by and between the Registrant and Joseph P. Pellegrino    S-1/A      6/22/06         10.10      

 

66


Table of Contents

Exhibit
Number

  

Exhibit Description

   Incorporated By Reference         
      Form    Date      Number      Filed
Herewith
 
10.11†    1997 Stock Option Plan and form of agreements thereunder    S-1      4/25/06         10.11      
10.12†    1998 Stock Option Plan and form of agreements thereunder    S-1      4/25/06         10.12      
10.13†    2000 Stock Option Plan and form of agreements thereunder    S-1      4/25/06         10.13      
10.14†    2004 Stock Option Plan and form of agreements thereunder    S-1      4/25/06         10.14      
10.15†    Second Amended and Restated 2006 Stock Option and Incentive Plan and form of agreements thereunder    8-K      6/18/10         10.1      
10.16†    Form of Indemnification Agreement between the Registrant and its directors and executive officers    S-1/A      5/26/06         10.17      
10.17†    Form of Restricted Stock Unit Award Agreement under the Registrant’s 2006 Stock Option and Incentive Plan    8-K      12/26/06         99.1      
10.18†    Management Incentive Compensation Plan    8-K      4/27/07         10.1      
10.19      Second Amendment of Lease dated May 21, 2007, by and between Rodger P. Nordblom and Peter C. Nordblom, as Trustees of Northwest Associates, and Registrant    8-K      6/15/07         10.1      
10.20      Third Amendment of Lease dated February 26, 2008, by and between Rodger P. Nordblom and Peter C. Nordblom, as Trustees of Northwest Associates, and Registrant    8-K      4/10/08         10.1      
10.21      Fourth Amendment of Lease dated October 31, 2008, by and between Rodger P. Nordblom and Peter C. Nordblom, as Trustees of Northwest Associates, and Registrant    10-K      3/31/09         10.36      
10.22†    First Amendment to Executive Retention and Severance Agreement dated December 23, 2008, by and between the Registrant and George W. LeMaitre    10-K      3/31/09         10.37      
10.23†    First Amendment to Employment Agreement dated December 19, 2008, by and between the Registrant and David Roberts    10-K      3/31/09         10.38      
10.24†    First Amendment to Employment Agreement dated December 19, 2008, by and between the Registrant and Joseph P. Pellegrino    10-K      3/31/09         10.39      
10.25      Fifth Amendment of Lease dated March 23, 2010, by and between Rodger P. Nordblom and Peter C. Nordblom, as Trustees of Northwest Associates, and Registrant    10-K      3/29/10         10.33      
10.26      Northwest Park Lease dated March 23, 2010, by and between Rodger P. Nordblom and Peter C. Nordblom, as Trustees of Northwest Associates, and Registrant    10-K      3/29/10         10.34      
10.27      Director Compensation Policy               X   
10.28      First Amendment to Northwest Park Lease dated September 14, 2010, by and between Rodger P. Nordblom and Peter C. Nordblom, as Trustees of Northwest Associates, and Registrant               X   

 

67


Table of Contents

Exhibit
Number

  

Exhibit Description

   Incorporated By Reference       
      Form    Date    Number    Filed
Herewith
 
  10.29    Second Amendment to Northwest Park Lease dated October 31, 2011, by and between NWP Building 4 LLC, as successor-in-interest to Trustees of Northwest Associates, and Registrant               X   
  21.1    List of Subsidiaries               X   
  23.1    Consent of Ernst & Young LLP               X   
  31.1    Certification of Chief Executive Officer, as required by Rule 13a-14(a) or Rule 15d-14(a)               X   
  31.2    Certification of Chief Financial Officer, as required by Rule 13a-14(a) or Rule 15d-14(a)               X   
  32.1*    Certification of Chief Executive Officer, as required by Rule 13a-14(b) or Rule 15d-14(b) and Section 1350 of Chapter 36 of Title 18 of the United States Code (18 U.S.C. §1350)               X   
  32.2*    Certification of Chief Financial Officer, as required by Rule 13a-14(b) or Rule 15d-14(b) and Section 1350 of Chapter 36 of Title 18 of the United States Code (18 U.S.C. §1350)               X   
101.INS    XBRL Instance Document.            
101.SCH    XBRL Taxonomy Extension Schema Document.            
101.CAL    XBRL Taxonomy Extension Calculation Linkbase Document.            
101.DEF    XBRL Taxonomy Extension Definition Linkbase Document.            
101.LAB    XBRL Taxonomy Extension Label Linkbase Document.            
101.PRE    XBRL Taxonomy Extension Presentation Linkbase Document.            

 

Indicates a management contract or any compensatory plan, contract, or arrangement.
*

The certifications attached as Exhibit 32.1 and 32.2 that accompany this Annual Report on Form 10-K are not deemed filed with the Securities and Exchange Commission and are not to be incorporated by reference into any filing of LeMaitre Vascular, Inc. under the Securities Act of 1933, as amended, or the Securities Exchange Act of 1934, as amended, whether made before or after the date of this Form 10-K, irrespective of any general incorporation language contained in such filing.

 

68


Table of Contents

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized, on March 27, 2012.

 

LEMAITRE VASCULAR

By:

 

/s/    GEORGE W. LEMAITRE

 

George W. LeMaitre,

Chief Executive Officer and Chairman of the Board

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.

 

Signature

  

Title

 

Date

/s/    GEORGE W. LEMAITRE        

George W. LeMaitre

  

Chief Executive Officer and Chairman of the Board (Principal Executive Officer)

  March 27, 2012

/s/    JOSEPH P. PELLEGRINO, Jr.        

Joseph P. Pellegrino, Jr.

  

Chief Financial Officer (Principal Accounting Officer)

  March 27, 2012

/s/    RUSSELL D. HAYS        

Russell D. Hays

   Director   March 27, 2012

/s/    MICHAEL C. JACKSON        

Michael C. Jackson

   Director   March 27, 2012

/s/    LAWRENCE J. JASINSKI        

Lawrence J. Jasinski

   Director   March 27, 2012

/s/    CORNELIA W. LEMAITRE        

Cornelia W. LeMaitre

  

Vice President, Human Resources and Director

  March 27, 2012

/s/    GEORGE D. LEMAITRE, M.D.        

George D. LeMaitre, M.D.

   Director   March 27, 2012

/s/    JOHN J. O’CONNOR        

John J. O’Connor

   Director   March 27, 2012

/s/    DAVID B. ROBERTS        

David B. Roberts

   President and Director   March 27, 2012

/s/    WILLIAM N. THORNDIKE, Jr.        

William N. Thorndike, Jr.

   Director   March 27, 2012

 

69


Table of Contents

INDEX TO FINANCIAL STATEMENTS

 

     Page  

LeMaitre Vascular, Inc.

  

Consolidated Financial Statements

  

Report of Independent Registered Public Accounting Firm

     F-2   

Consolidated Balance Sheets as of December 31, 2011 and 2010

     F-3   

Consolidated Statements of Operations for the Years Ended December 31, 2011, 2010 and 2009

     F-4   

Consolidated Statements of Stockholders’ Equity and Comprehensive Income for the Years Ended December 31, 2011, 2010 and 2009

     F-5   

Consolidated Statements of Cash Flows for the Years Ended December 31, 2011, 2010 and 2009

     F-8   

Notes to Consolidated Financial Statements

     F-9   

 

F-1


Table of Contents

Report of Independent Registered Public Accounting Firm

The Board of Directors and Stockholders of LeMaitre Vascular, Inc.

We have audited the accompanying consolidated balance sheets of LeMaitre Vascular, Inc. as of December 31, 2011 and 2010, and the related consolidated statements of operations, stockholders’ equity and comprehensive income, and cash flows for each of the three years in the period ended December 31, 2011. These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. We were not engaged to perform an audit of the Company’s internal control over financial reporting. Our audits included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the financial statements referred to above present fairly, in all material respects, the consolidated financial position of LeMaitre Vascular, Inc. at December 31, 2011 and 2010, and the consolidated results of its operations and its cash flows for each of the three years in the period ended December 31, 2011, in conformity with U.S. generally accepted accounting principles.

/s/ Ernst & Young LLP

Boston, Massachusetts

March 27, 2012

 

F-2


Table of Contents

LeMaitre Vascular, Inc.

Consolidated Balance Sheets

 

     December 31,     December 31,  
     2011     2010  

Assets

    

Current assets:

    

Cash and cash equivalents

   $ 20,132      $ 22,614   

Accounts receivable, net of allowances of $211 at December 31, 2011, and $184 at December 31, 2010

     8,541        8,475   

Inventory

     8,003        8,375   

Prepaid expenses and other current assets

     3,011        3,447   
  

 

 

   

 

 

 

Total current assets

     39,687        42,911   

Property and equipment, net

     4,661        3,806   

Goodwill

     11,917        11,917   

Other intangibles, net

     2,985        3,686   

Deferred tax assets

     6        134   

Other assets

     431        820   
  

 

 

   

 

 

 

Total assets

   $ 59,687      $ 63,274   
  

 

 

   

 

 

 

Liabilities and stockholders’ equity

    

Current liabilities:

    

Accounts payable

   $ 981      $ 1,320   

Accrued expenses

     5,539        8,628   

Acquisition-related obligations

     19        441   
  

 

 

   

 

 

 

Total current liabilities

     6,539        10,389   

Deferred tax liabilities

     989        443   

Other long-term liabilities

     71        86   
  

 

 

   

 

 

 

Total liabilities

     7,599        10,918   

Commitments and contingencies (Note 8)

    

Stockholders’ equity:

    

Preferred stock, $0.01 par value; authorized 5,000,000 shares; none outstanding

     —          —     

Common stock, $0.01 par value; authorized 100,000,000 shares; issued 16,303,155 shares at December 31, 2011, and 16,117,201 shares at December 31, 2010

     163        161   

Additional paid-in capital

     64,619        64,642   

Accumulated deficit

     (6,440     (8,583

Accumulated other comprehensive loss

     (606     (429

Treasury stock, at cost; 975,700 shares at December 31, 2011, and 637,916 shares at December 31, 2010

     (5,648     (3,435
  

 

 

   

 

 

 

Total stockholders’ equity

     52,088        52,356   
  

 

 

   

 

 

 

Total liabilities and stockholders’ equity

   $ 59,687      $ 63,274   
  

 

 

   

 

 

 

 

See accompanying notes to consolidated financial statements.

 

F-3


Table of Contents

LeMaitre Vascular, Inc.

Consolidated Statements of Operations

 

     Year ended December 31,  
     2011     2010     2009  
    

(in thousands,

except per share data)

 

Net sales

   $ 57,685      $ 56,060      $ 50,908   

Cost of sales

     17,458        14,341        13,604   
  

 

 

   

 

 

   

 

 

 

Gross profit

     40,227        41,719        37,304   

Sales and marketing

     19,375        19,409        17,710   

General and administrative

     11,228        10,506        9,852   

Research and development

     4,425        5,488        5,910   

Restructuring charges

     2,161        1,816        1,777   

Gain on termination of distribution agreement

     (735     —          —     

Impairment charges

     83        485        106   
  

 

 

   

 

 

   

 

 

 

Total operating expenses

     36,537        37,704        35,355   
  

 

 

   

 

 

   

 

 

 

Income from operations

     3,690        4,015        1,949   

Other income (expense):

      

Interest income

     11        31        38   

Interest expense

     —          (5     (26

Foreign currency gain (loss)

     51        (30     280   

Other income (expense), net

     —          14        (26
  

 

 

   

 

 

   

 

 

 

Income before income taxes

     3,752        4,025        2,215   

Provision (benefit) for income taxes

     1,609        (1,988     617   
  

 

 

   

 

 

   

 

 

 

Net income

   $ 2,143      $ 6,013      $ 1,598   
  

 

 

   

 

 

   

 

 

 

Net income per share of common stock:

      

Basic

   $ 0.14      $ 0.38      $ 0.10   
  

 

 

   

 

 

   

 

 

 

Diluted

   $ 0.13      $ 0.37      $ 0.10   
  

 

 

   

 

 

   

 

 

 

Weighted-average shares outstanding:

      

Basic

     15,458        15,627        15,687   
  

 

 

   

 

 

   

 

 

 

Diluted

     15,989        16,114        15,916   
  

 

 

   

 

 

   

 

 

 

Cash dividends declared per common share

   $ 0.08      $ —        $ —     
  

 

 

   

 

 

   

 

 

 

 

See accompanying notes to consolidated financial statements.

 

F-4


Table of Contents

LeMaitre Vascular, Inc.

Consolidated Statements of Stockholders’ Equity and Comprehensive Income

(in thousands, except share data)

 

     Common Stock      Additional
Paid-in

Capital
     Accumulated
Deficit
    Accumulated
Other
Comprehensive

Income (Loss)
    Treasury Stock     Total
Stockholders’

Equity
 
     Shares      Amount             Shares      Amount    

Balance at December 31, 2008

     15,703,522       $ 157       $ 62,290       $ (16,194   $ (272     50,284       $ (233   $ 45,748   

Net income

              1,598               1,598   

Unrealized gain on available for sale securities

                95             95   

Foreign currency translation adjustment

                271             271   
                    

 

 

 

Comprehensive income

                       1,964   

Issuance of common stock for stock options exercised

     51,250         1         156                  157   

Issuance of common stock for employee stock plan purchases

     18,378            44                  44   

Vested restricted stock units

     138,469         1                     1   

Stock based compensation expense

           985                  985   

Repurchase of common stock at cost

                  160,654         (686     (686
  

 

 

    

 

 

    

 

 

    

 

 

   

 

 

   

 

 

    

 

 

   

 

 

 

Balance at December 31, 2009

     15,911,619       $ 159       $ 63,475       $ (14,596   $ 94        210,938       $ (919   $ 48,213   
  

 

 

    

 

 

    

 

 

    

 

 

   

 

 

   

 

 

    

 

 

   

 

 

 

 

 

See accompanying notes to consolidated financial statements.

 

F-5


Table of Contents

LeMaitre Vascular, Inc.

Consolidated Statements of Stockholders’ Equity and Comprehensive Income—(continued)

(in thousands, except share data)

 

    Common Stock      Additional
Paid-in
Capital
     Accumulated
Deficit
    Accumulated
Other
Comprehensive
Income (Loss)
    Treasury Stock     Total
Stockholders’
Equity
 
    Shares      Amount             Shares      Amount    

Balance at December 31, 2009

    15,911,619       $ 159       $ 63,475       $ (14,596   $ 94        210,938       $ (919   $ 48,213   

Net income

             6,013               6,013   

Unrealized loss on available for sale securities

               (4          (4

Foreign currency translation adjustment

               (519          (519
                   

 

 

 

Comprehensive income

                      5,490   

Issuance of common stock for stock options exercised

    73,497         1         130                  131   

Vested restricted stock units

    132,085         1                     1   

Tax benefits from stock-based compensation awards

          70                  70   

Stock based compensation expense

          967                  967   

Repurchase of common stock at cost

                 426,978         (2,516     (2,516
 

 

 

    

 

 

    

 

 

    

 

 

   

 

 

   

 

 

    

 

 

   

 

 

 

Balance at December 31, 2010

    16,117,201       $ 161       $ 64,642       $ (8,583   $ (429     637,916       $ (3,435   $ 52,356   
 

 

 

    

 

 

    

 

 

    

 

 

   

 

 

   

 

 

    

 

 

   

 

 

 

 

 

See accompanying notes to consolidated financial statements.

 

F-6


Table of Contents

LeMaitre Vascular, Inc.

Consolidated Statements of Stockholders’ Equity and Comprehensive Income—(continued)

(in thousands, except share data)

 

    Common Stock      Additional
Paid-in
Capital
    Accumulated
Deficit
    Accumulated
other
Comprehensive

Income (Loss)
    Treasury Stock     Total
Stockholders’
Equity
 
    Shares      Amount            Shares      Amount    

Balance at December 31, 2010

    16,117,201       $ 161       $ 64,642      $ (8,583   $ (429     637,916       $ (3,435   $ 52,356   

Net income

            2,143               2,143   

Foreign currency translation adjustment

              (177          (177
                  

 

 

 

Comprehensive income

                     1,966   

Issuance of common stock for stock options exercised

    56,751         1         67                 68   

Vested restricted stock units

    129,203         1                    1   

Tax benefits from stock-based compensation awards

          50                 50   

Stock based compensation expense

          1,097                 1,097   

Repurchase of common stock at cost

                337,784         (2,213     (2,213

Common stock cash dividend paid

          (1,237              (1,237
 

 

 

    

 

 

    

 

 

   

 

 

   

 

 

   

 

 

    

 

 

   

 

 

 

Balance at December 31, 2011

    16,303,155       $ 163       $ 64,619      $ (6,440   $ (606     975,700       $ (5,648   $ 52,088   
 

 

 

    

 

 

    

 

 

   

 

 

   

 

 

   

 

 

    

 

 

   

 

 

 

 

 

See accompanying notes to consolidated financial statements.

 

F-7


Table of Contents

LeMaitre Vascular, Inc.

Consolidated Statements of Cash Flows

 

     Year ended December 31,  
     2011     2010     2009  
     (in thousands)  

Operating activities

      

Net income

   $ 2,143      $ 6,013      $ 1,598   

Adjustments to reconcile net income to net cash provided by operating activities:

      

Depreciation and amortization

     2,037        1,376        1,419   

Stock-based compensation

     1,097        967        985   

Amortization of premium on marketable securities

     —          1        46   

Loss on sales of marketable securities

     —          —          34   

Impairment charges

     83        485        106   

Provision for losses in accounts receivable

     56        55        75   

Provision for inventory write-downs

     1,011        836        428   

Provision (benefit) for deferred income taxes

     1,159        (2,380     226   

Gain on termination of distribution agreement

     (735     —          —     

Tax benefits from stock-based compensation awards

     (50     (70     —     

Loss on disposal of property and equipment

     30        51        17   

Non cash restructuring charges

     732        108        —     

Foreign currency transaction gain (loss)

     (156     37        63   

Changes in operating assets and liabilities, net of effect of business acquisitions:

      

Accounts receivable

     (174     (973     (486

Inventory

     (998     (1,735     164   

Prepaid expenses and other assets

     105        (846     610   

Accounts payable and other liabilities

     (3,170     3,127        155   
  

 

 

   

 

 

   

 

 

 

Net cash provided by operating activities

     3,170        7,052        5,440   

Investing activities

      

Purchases of property and equipment

     (2,021     (2,471     (577

Payments related to acquisitions

     (1,151     (3,520     (759

Receipts related to divestitures

     1,414        40        —     

Purchase of technology and licenses