e10vq
 
UNITED STATES SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
 
 
FORM 10-Q
 
(Mark One)
 
þ  QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
 
For the quarterly period ended July 2, 2010
 
o  TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
 
For the transition period from           to          
 
Commission file number 001-15885
 
BRUSH ENGINEERED MATERIALS INC.
(Exact name of Registrant as specified in charter)
 
     
Ohio
  34-1919973
(State or other jurisdiction of incorporation or organization)   (I.R.S. Employer Identification No.)
6070 Parkland Blvd., Mayfield Hts., Ohio
(Address of principal executive offices)
  44124
(Zip Code)
     
 
Registrant’s telephone number, including area code:
216-486-4200
 
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes þ     No o
 
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes o     No o
 
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):
 
Large accelerated filer o Accelerated filer þ Non-accelerated filer o Smaller reporting company o
(Do not check if a smaller reporting company)
 
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes o     No þ
 
As of July 23, 2010 there were 20,350,913 common shares, no par value, outstanding.
 


 

 
PART I FINANCIAL INFORMATION
 
BRUSH ENGINEERED MATERIALS INC. AND SUBSIDIARIES
 
Item 1.   Financial Statements
 
The consolidated financial statements of Brush Engineered Materials Inc. and its subsidiaries for the second quarter and first half ended July 2, 2010 are as follows:
 
     
Consolidated Statements of Income and Loss —
Second quarter and first half ended July 2, 2010 and July 3, 2009
  2
Consolidated Balance Sheets —
July 2, 2010 and December 31, 2009
  3
Consolidated Statements of Cash Flows —
First half ended July 2, 2010 and July 3, 2009
  4


1


 

Consolidated Statements of Income and Loss
(Unaudited)
 
                                 
    Second Quarter Ended     First Half Ended  
    July 2,
    July 3,
    July 2,
    July 3,
 
(Thousands, except per share amounts)   2010     2009     2010     2009  
   
 
Net sales
  $ 325,946     $ 174,134     $ 621,028     $ 309,493  
Cost of sales
    270,093       152,000       515,861       272,757  
                                 
Gross margin
    55,853       22,134       105,167       36,736  
Selling, general and administrative expense
    30,611       20,694       60,950       43,239  
Research and development expense
    1,798       1,526       3,483       3,220  
Other-net
    2,946       1,474       7,031       3,230  
                                 
Operating profit (loss)
    20,498       (1,560 )     33,703       (12,953 )
Interest expense — net
    691       271       1,310       597  
                                 
Income (loss) before income taxes
    19,807       (1,831 )     32,393       (13,550 )
Income tax expense (benefit)
    6,088       (1,046 )     11,953       (4,620 )
                                 
Net income (loss)
  $ 13,719     $ (785 )   $ 20,440     $ (8,930 )
                                 
Net income (loss) per share of common stock — basic
  $ 0.68     $ (0.04 )   $ 1.01     $ (0.44 )
Weighted-average number of common shares outstanding — basic
    20,323       20,186       20,290       20,159  
Net income (loss) per share of common stock — diluted
  $ 0.67     $ (0.04 )   $ 1.00     $ (0.44 )
Weighted-average number of common shares outstanding — diluted
    20,600       20,186       20,534       20,159  
 
See notes to consolidated financial statements.


2


 

Consolidated Balance Sheets
(Unaudited)
 
                 
    July 2,
    Dec. 31,
 
(Dollars in thousands)   2010     2009  
   
 
Assets
               
Current assets
               
Cash and cash equivalents
  $ 16,081     $ 12,253  
Accounts receivable
    145,265       83,997  
Other receivables
    4,827       11,056  
Inventories
    140,280       130,098  
Prepaid expenses
    29,213       28,020  
Deferred income taxes
    8,459       14,752  
                 
Total current assets
    344,125       280,176  
Related-party notes receivable
    90       90  
Long-term deferred income taxes
    4,873       4,873  
Property, plant and equipment — cost
    703,486       665,361  
Less allowances for depreciation, depletion and amortization
    (449,667 )     (437,595 )
                 
Property, plant and equipment — net
    253,819       227,766  
Other assets
    42,082       42,014  
Goodwill
    70,479       67,034  
                 
Total assets
  $ 715,468     $ 621,953  
                 
Liabilities and Shareholders’ Equity
               
Current liabilities
               
Short-term debt
  $ 42,161     $ 56,148  
Accounts payable
    36,681       36,573  
Other liabilities and accrued items
    46,029       44,082  
Unearned revenue
    403       432  
Income taxes
    1,982       2,459  
                 
Total current liabilities
    127,256       139,694  
Other long-term liabilities
    9,461       9,579  
Retirement and post-employment benefits
    78,645       82,354  
Unearned income
    54,612       39,697  
Long-term income taxes
    2,329       2,329  
Deferred income taxes
    1,909       136  
Long-term debt
    78,305       8,305  
Shareholders’ equity
    362,951       339,859  
                 
Total liabilities and shareholders’ equity
  $ 715,468     $ 621,953  
                 
 
See notes to consolidated financial statements.


3


 

Consolidated Statements of Cash Flows
(Unaudited)
 
                 
    First Half Ended  
    July 2,
    July 3,
 
(Dollars in thousands)   2010     2009  
   
 
Net income (loss)
  $ 20,440     $ (8,930 )
Adjustments to reconcile net income (loss) to net cash (used in) provided from
operating activities:
               
Depreciation, depletion and amortization
    17,100       14,455  
Amortization of mine costs
          1,896  
Amortization of deferred financing costs in interest expense
    282       209  
Derivative financial instrument ineffectiveness
    489        
Stock-based compensation expense
    1,988       1,630  
Changes in assets and liabilities net of acquired assets
and liabilities:
               
Decrease (increase) in accounts receivable
    (58,366 )     12,446  
Decrease (increase) in other receivables
    6,229       (1,261 )
Decrease (increase) in inventory
    (10,276 )     23,017  
Decrease (increase) in prepaid and other current assets
    (1,147 )     1,199  
Decrease (increase) in deferred income taxes
    6,117       (3,405 )
Increase (decrease) in accounts payable and accrued expenses
    (1,798 )     (18,686 )
Increase (decrease) in unearned revenue
    (29 )     1,950  
Increase (decrease) in interest and taxes payable
    (359 )     (314 )
Increase (decrease) in long-term liabilities
    (1,320 )     (13,769 )
Other — net
    (59 )     1,286  
                 
Net cash (used in) provided from operating activities
    (20,709 )     11,723  
Cash flows from investing activities:
               
Payments for purchase of property, plant and equipment
    (24,768 )     (16,054 )
Payments for mine development
    (7,425 )     (386 )
Reimbursements for capital equipment under government contracts
    14,915       10,169  
Payments for purchase of business net of cash received
    (20,605 )      
Proceeds from transfer of acquired inventory to consignment line
    5,667        
Proceeds from sale of property, plant and equipment
    76        
Other investments — net
    14       21  
                 
Net cash used in investing activities
    (32,126 )     (6,250 )
Cash flows from financing activities:
               
Proceeds from issuance (repayment) of short-term debt
    (14,035 )     (3,336 )
Proceeds from issuance of long-term debt
    70,000       8,300  
Repayment of long-term debt
          (8,000 )
Issuance of common stock under stock option plans
    851       157  
Tax benefit from exercise of stock options
    164       11  
                 
Net cash provided from (used in) financing activities
    56,980       (2,868 )
Effects of exchange rate changes
    (317 )     (109 )
                 
Net change in cash and cash equivalents
    3,828       2,496  
Cash and cash equivalents at beginning of period
    12,253       18,546  
                 
Cash and cash equivalents at end of period
  $ 16,081     $ 21,042  
                 
 
See notes to consolidated financial statements.


4


 

Notes to Consolidated Financial Statements
(Unaudited)
 
Note A — Accounting Policies
 
In management’s opinion, the accompanying consolidated financial statements contain all adjustments necessary to present fairly the financial position as of July 2, 2010 and December 31, 2009 and the results of operations for the second quarter and first half ended July 2, 2010 and July 3, 2009. All adjustments were of a normal and recurring nature. Certain amounts in prior years have been reclassified to conform to the 2010 consolidated financial statement presentation.
 
Note B — Inventories
 
                 
    July 2,
    Dec. 31,
 
(Dollars in thousands)   2010     2009  
   
 
Principally average cost:
               
Raw materials and supplies
  $ 41,771     $ 38,740  
Work in process
    126,100       119,698  
Finished goods
    45,370       38,950  
                 
Gross inventories
    213,241       197,388  
Excess of average cost over LIFO inventory value
    72,961       67,290  
                 
Net inventories
  $ 140,280     $ 130,098  
                 
 
Note C — Pensions and Other Post-retirement Benefits
 
The following is a summary of the second quarter and first half 2010 and 2009 net periodic benefit cost for the domestic defined benefit pension plan and the domestic retiree medical plan.
 
                                 
    Pension Benefits
    Other Benefits
 
    Second Quarter Ended     Second Quarter Ended  
    July 2,
    July 3,
    July 2,
    July 3,
 
(Dollars in thousands)   2010     2009     2010     2009  
   
 
Components of net periodic benefit cost
                               
Service cost
  $ 1,244     $ 1,067     $ 68     $ 72  
Interest cost
    2,156       2,164       434       482  
Expected return on plan assets
    (2,536 )     (2,445 )            
Amortization of prior service cost
    (132 )     (135 )     (9 )     (9 )
Amortization of net loss
    711       375              
                                 
Net periodic benefit cost
  $ 1,443     $ 1,026     $ 493     $ 545  
                                 
 
                                 
    Pension Benefits
    Other Benefits
 
    First Half Ended     First Half Ended  
    July 2,
    July 3,
    July 2,
    July 3,
 
(Dollars in thousands)   2010     2009     2010     2009  
   
 
Components of net periodic benefit cost
                               
Service cost
  $ 2,488     $ 2,182     $ 136     $ 145  
Interest cost
    4,312       4,157       869       964  
Expected return on plan assets
    (5,072 )     (4,617 )            
Amortization of prior service cost
    (265 )     (278 )     (18 )     (18 )
Amortization of net loss
    1,422       809              
Curtailment gain
          (1,069 )            
                                 
Net periodic benefit cost
  $ 2,885     $ 1,184     $ 987     $ 1,091  
                                 


5


 

 
As a result of a significant reduction in force, management determined that there was a curtailment of the domestic defined benefit pension plan in the first quarter 2009. In accordance with accounting guidelines, the plan assets and liabilities were remeasured as of the curtailment date of February 28, 2009. As part of the remeasurement, management reviewed all of the key valuation assumptions and increased the discount rate from 6.15% to 6.80%.
 
The curtailment reduced the annual expense for 2009 on the domestic plan from a previously estimated $5.3 million to $4.3 million. In addition, the curtailment resulted in the recording of a $1.1 million one-time benefit in the first quarter 2009 as a result of applying the percentage reduction in the estimated future working lifetime of the plan participants against the unrecognized prior service cost benefit. Cost of sales was reduced by $0.8 million and selling, general and administrative expense was reduced by $0.3 million from the recording of the one-time benefit.
 
The Company made contributions to the domestic defined benefit pension plan of $4.5 million in the first half 2010 as expected.
 
Note D — Contingencies
 
Brush Wellman Inc., one of the Company’s wholly owned subsidiaries, is a defendant in various legal proceedings where the plaintiffs allege that they have contracted chronic beryllium disease (CBD) or related ailments as a result of exposure to beryllium. Management believes that the Company has substantial defenses and intends to defend these suits vigorously. The Company has recorded a reserve for CBD litigation of $0.4 million as of July 2, 2010 and $0.6 million as of December 31, 2009. This reserve covers existing claims only and unasserted claims could give rise to additional losses. Defense costs are expensed as incurred. Final resolution of the asserted claims may be for different amounts than currently reserved. Two cases were settled for an aggregate cost of less than $0.1 million in the first half of 2010.
 
One of the two outstanding CBD cases as of July 2, 2010 was a third-party claim where the alleged exposure occurred prior to December 31, 2007 and therefore, the indemnity, if any, and the defense costs are covered by insurance subject to an annual deductible of $1.0 million. Incurred costs were below the deductible in the first half of 2010. The plaintiff in the other outstanding case, which was filed in the second quarter 2010, alleges exposure occurred after December 31, 2007.
 
Williams Advanced Materials Inc. (WAM), one of the Company’s wholly owned subsidiaries, was a defendant in an ongoing patent infringement legal case. In response, WAM had filed various counter-claims against the plaintiff. In early April 2010, WAM and the plaintiff agreed to dismiss all claims against each other. No indemnity payments were made by either party.
 
The Company has an active environmental compliance program and records reserves for the probable cost of identified environmental remediation projects. The reserves are established based upon analyses conducted by the Company’s engineers and outside consultants and are adjusted from time to time based upon on-going studies and the difference between actual and estimated costs. The reserves may also be affected by rulings and negotiations with regulatory agencies. The undiscounted reserve balance was $5.5 million as of July 2, 2010 and $5.6 million as of December 31, 2009. Environmental projects tend to be long-term and the final actual remediation costs may differ from the amounts currently recorded.


6


 

 
Note E — Comprehensive Income
 
The reconciliation between net income (loss) and comprehensive income (loss) for the second quarter and first half ended July 2, 2010 and July 3, 2009 is as follows:
 
                                 
    Second Quarter Ended     First Half Ended  
    July 2,
    July 3,
    July 2,
    July 3,
 
(Dollars in thousands)   2010     2009     2010     2009  
   
 
Net income (loss)
  $ 13,719     $ (785 )   $ 20,440     $ (8,930 )
Cumulative translation adjustment
    (440 )     1,460       (1,346 )     (1,126 )
Change in the fair value of derivative
financial instruments, net of tax
    (85 )     (984 )     447       340  
Pension and other retirement plan
liability adjustments, net of tax
    373       373       748       2,125  
                                 
Comprehensive income (loss)
  $ 13,567     $ 64     $ 20,289     $ (7,591 )
                                 
 
Note F — Segment Reporting
 
                                                         
    Advanced
                                     
    Material
    Specialty
    Beryllium
    Engineered
                   
    Technologies
    Engineered
    and Beryllium
    Material
          All
       
(Dollars in thousands)   and Services     Alloys     Composites     Systems     Subtotal     Other     Total  
   
 
Second Quarter 2010
                                                       
Sales to external customers
  $ 213,897     $ 77,852     $ 15,738     $ 18,413     $ 325,900     $ 46     $ 325,946  
Intersegment sales
    467       2,935       144       919       4,465             4,465  
Operating profit (loss)
    9,246       8,510       2,074       2,033       21,863       (1,365 )     20,498  
Second Quarter 2009
                                                       
Sales to external customers
  $ 112,273     $ 41,239     $ 13,123     $ 7,499     $ 174,134     $     $ 174,134  
Intersegment sales
    50       470       26       185       731             731  
Operating profit (loss)
    8,390       (9,280 )     1,035       (819 )     (674 )     (886 )     (1,560 )
First Half 2010
                                                       
Sales to external customers
  $ 416,907     $ 141,240     $ 28,833     $ 33,875     $ 620,855     $ 173     $ 621,028  
Intersegment sales
    861       6,684       177       1,311       9,033             9,033  
Operating profit (loss)
    17,711       11,838       4,231       3,074       36,854       (3,151 )     33,703  
Assets
    330,712       219,739       99,135       25,569       675,155       40,313       715,468  
First Half 2009
                                                       
Sales to external customers
  $ 192,344     $ 78,132     $ 26,113     $ 12,904     $ 309,493     $     $ 309,493  
Intersegment sales
    175       1,275       78       543       2,071             2,071  
Operating profit (loss)
    9,095       (20,193 )     2,859       (3,450 )     (11,689 )     (1,264 )     (12,953 )
Assets
    208,971       205,947       59,383       18,590       492,891       57,382       550,273  
 
Note G — Stock-based Compensation Expense
 
The Company granted approximately 22,000 shares of restricted stock to its non-employee directors in the second quarter 2010 at a fair market value of $26.74 per share. The fair value was determined using the closing price of the Company’s common stock on the grant date and will be amortized over the vesting period of one year.
 
The Company granted approximately 65,000 shares of restricted stock to certain employees in the first quarter 2010 at a fair value of $21.24 per share. The fair value was determined using the closing price of the Company’s common stock on the grant date and will be amortized over the vesting period of three years. The holders of the restricted stock will forfeit their shares should their employment be terminated prior to the end of the vesting period.
 
The Company granted approximately 212,000 stock appreciation rights (SARs) to certain employees in the first quarter 2010 at a strike price of $21.24 per share. The fair value of the SARs, which was determined on the grant date using a Black-Scholes model, was $11.51 per share and will be amortized over the vesting period of three years. The SARs expire ten years from the date of the grant.


7


 

 
Total stock-based compensation expense for the above and previously existing awards and plans was $1.0 million in both the second quarter 2010 and 2009. For the first half of the year, the stock-based compensation expense was $2.0 million in 2010 and $1.6 million in 2009.
 
The Company received $0.9 million for the exercise of approximately 47,000 shares in the first half of 2010 and $0.2 million for the exercise of approximately 10,000 shares in the first half of 2009.
 
Note H — Other-net
 
Other-net expense for the second quarter and first half of 2010 and 2009 is summarized as follows:
 
                                 
    Second Quarter Ended     First Half Ended  
    July 2,
    July 3,
    July 2,
    July 3,
 
(Dollars in thousands)   2010     2009     2010     2009  
   
 
Income (expense)
                               
Exchange/translation gain (loss)
  $ 246     $ 346     $ (307 )   $ 560  
Amortization of intangible assets
    (1,555 )     (853 )     (3,051 )     (1,706 )
Metal financing fees
    (1,265 )     (704 )     (2,440 )     (1,578 )
Derivative ineffectiveness
                (489 )      
Other items
    (372 )     (263 )     (744 )     (506 )
                                 
Other-net (expense)
  $ (2,946 )   $ (1,474 )   $ (7,031 )   $ (3,230 )
                                 
 
Note I — Income Taxes
 
The tax expense of $6.1 million in the second quarter 2010 was calculated by applying an effective rate of 30.7% against income before income taxes of $19.8 million while the tax expense of $12.0 million in the first half of 2010 was calculated by applying a rate of 36.9% against income before income taxes of $32.4 million. The differences between the statutory and effective rates in the second quarter and first half of 2010 were due to the impact of percentage depletion, foreign source income and deductions, the production deduction, executive compensation and other factors.
 
In addition, the tax expense in the first half of 2010 included a discrete item of $1.4 million for the reduction in a deferred tax asset recorded in the first quarter 2010. The asset was reduced as a result of the newly enacted Patient Protection and Affordable Care Act, as amended by the Health Care and Education Reconciliation Act. This new legislation eliminates the income tax deduction related to prescription drug benefits provided to retirees and reimbursed under the Medicare Part D retiree drug subsidy program beginning in 2013.
 
The tax benefit of $1.0 million in the second quarter 2009 was calculated by applying an effective rate of (57.1%) against the loss before income taxes of $1.8 million while the tax benefit of $4.6 million in the first half of 2009 was calculated by applying a rate of (34.1%) against the loss before income taxes of $13.6 million. The differences between the statutory and effective rates in the second quarter and first half of 2009 were due to the impact of percentage depletion, foreign source income and deductions and other factors. Discrete items did not have a material impact on the effective rate in the second quarter or first half of 2009.
 
The lower effective tax rate in the second quarter 2010 than the effective rate used in the first quarter 2010 (prior to the impact of the discrete events) reduced the tax expense and increased net income in the second quarter 2010 by $0.9 million, or $0.04 per share, diluted.
 
Note J — Acquisition
 
On January 5, 2010, the Company acquired the outstanding capital stock of Academy Corporation (Academy) of Albuquerque, New Mexico for $21.0 million in cash. Academy provides precious and non-precious metals and refining services for a variety of applications, including architectural glass, solar energy, medical and electronics. Major product forms include sputtering targets, sheet, fine wire, rod and powder. Academy employs approximately 150 people at its four leased facilities.


8


 

 
The Company financed the acquisition with a combination of cash on hand and borrowing under the $240.0 million revolving credit agreement. The $21.0 million purchase price is net of $1.7 million the Company received back from the seller in the second quarter 2010 as a result of the resolution of working capital valuation adjustments in accordance with the purchase agreement. Additional funds remain in escrow pending finalization of various other matters as detailed in the purchase agreement. Immediately after the purchase, the Company transferred Academy’s precious metal inventory to a a financial institution for its fair value of $5.7 million and consigned it back under the existing consignment lines.
 
Academy’s results are included in the Company’s financial statements since the acquisition date and are reported as part of the Advanced Material Technologies and Services segment. Academy had sales of $85.0 million and generated income before income taxes of $1.4 million in the first half of 2010. The purchase price allocation is preliminary in that the Company has not yet completed its appraisal of the acquired tangible and intangible assets nor have the acquired deferred taxes been valued. A condensed balance sheet depicting the preliminary amounts assigned to the acquired assets and liabilities as of the acquisition date is as follows:
 
         
    Asset
 
(Dollars in thousands)   (Liability)  
   
 
Cash
  $ 380  
Current assets
    4,524  
Precious metal inventory
    5,667  
Finite-lived intangible assets
    3,254  
Property, plant and equipment
    8,554  
Other assets
    10  
Goodwill
    3,171  
Current liabilities
    (4,575 )
         
Total purchase
  $ 20,985  
         
 
Assuming that the Academy acquisition occurred on January 1, 2009, the pro forma effect on selected line items from the Company’s Consolidated Statement of Income and Loss are as follows:
 
                                 
    Pro Forma Results
    Second Quarter Ended   First Half Ended
    July 2,
  July 3,
  July 2,
  July 3,
(Dollars in thousands, except per share amounts)   2010   2009   2010   2009
 
 
Sales
  $ 325,946     $ 215,895     $ 621,028     $ 392,902  
Income (loss) before income taxes
    19,807       (1,092 )     32,393       (13,352 )
Net income (loss)
    13,719       (305 )     20,440       (8,801 )
Diluted earnings per share
  $ 0.67     $ (0.02 )   $ 1.00     $ (0.44 )
 
Note K — Fair Value of Financial Instruments
 
The Company measures and records financial instruments at their fair values. A fair value hierarchy is used for those instruments measured at fair value that distinguishes between assumptions based on market data (observable inputs) and the Company’s assumptions (unobservable inputs). The hierarchy consists of three levels:
 
Level 1 — Quoted market prices in active markets for identical assets and liabilities;
 
Level 2 — Inputs other than Level 1 inputs that are either directly or indirectly observable; and,
 
Level 3 — Unobservable inputs developed using estimates and assumptions developed by the Company, which reflect those that a market participant would use.


9


 

 
 
The following table summarizes the financial instruments measured at fair value in the Consolidated Balance Sheet as of July 2, 2010:
 
                                 
          Fair Value Measurements  
          Quoted Prices
             
          in Active
    Significant
       
          Markets for
    Other
    Significant
 
          Identical
    Observable
    Unobservable
 
(Dollars in thousands)
        Assets
    Inputs
    Inputs
 
Description   Total     (Level 1)     (Level 2)     (Level 3)  
   
 
Financial Assets
                               
Directors’ deferred compensation investments
  $ 599     $ 599     $     $  
Foreign currency forward contracts
    1,019             1,019        
                                 
Total
  $ 1,618     $ 599     $ 1,019     $  
                                 
Financial Liabilities
                               
Directors’ deferred compensation liability
  $ 599     $ 599     $     $  
Foreign currency forward contracts
    216             216        
Copper forward contracts
    972             972        
Embedded copper derivative
    370             370        
                                 
Total
  $ 2,157     $ 599     $ 1,558     $  
                                 
 
The Company uses a market approach to value the assets and liabilities for outstanding derivative contracts in the table above. Foreign currency forwards are valued through models that utilize market observable inputs including both spot and forward prices for the same underlying currencies. Copper forward contracts and the embedded copper derivative are valued through models using spot market rates. The carrying values of the other working capital items and debt on the Consolidated Balance Sheet approximate their fair values as of July 2, 2010.
 
Note L — Derivative Instruments and Hedging Activity
 
The Company uses derivative contracts to hedge portions of its foreign currency exposures. The objectives and strategies for using foreign currency derivatives are as follows:
 
The Company sells products to overseas customers in their local currencies, primarily the euro, sterling and yen. The Company uses foreign currency derivatives, mainly forward contracts and options, to hedge these anticipated sales transactions. The purpose of the hedge program is to protect against the reduction in dollar value of the foreign currency sales from adverse exchange rate movements. Should the dollar strengthen significantly, the decrease in the translated value of the foreign currency sales should be partially offset by gains on the hedge contracts. Depending upon the methods used, the hedge contract may limit the benefits from a weakening U.S. dollar.
 
The use of forward contracts locks in a firm rate and eliminates any downside from an adverse rate movement as well as any benefit from a favorable rate movement. The Company may from time to time choose to hedge with options or a tandem of options known as a collar. These hedging techniques can limit or eliminate the downside risk but can allow for some or all of the benefit from a favorable rate movement to be realized. Unlike a forward contract, a premium is paid for an option; collars, which are a combination of a put and call option, may have a net premium but they can be structured to be cash neutral. The Company will primarily hedge with forward contracts due to the relationship between the cash outlay and the level of risk.
 
The use of foreign currency derivative contracts is governed by policies approved by the Board of Directors. A team consisting of senior financial managers reviews the estimated exposure levels, as defined by budgets, forecasts and other internal data, and determines the timing, amounts and instruments to use to hedge that exposure within the confines of the policy. Management analyzes the effective hedged rates and the actual and projected gains and losses on the hedging transactions against the program objectives, targeted rates and levels of risk assumed. Hedge contracts are typically layered in at different times for a specified exposure period in order to minimize the impact of rate movements.


10


 

 
 
The Company will only enter into a derivative contract if there is an underlying identified exposure. Contracts are typically held until maturity. The Company does not engage in derivative trading activities and does not use derivatives for speculative purposes. The Company only uses currency hedge contracts that are denominated in the same currency as the underlying exposure.
 
All derivatives are recorded on the balance sheet at their fair values. If the derivative is designated and effective as a cash flow hedge, changes in the fair value of the derivative are recognized in other comprehensive income (OCI) until the hedged item is recognized in earnings. The ineffective portion of a derivative’s fair value, if any, is recognized in earnings immediately. If a derivative is not a hedge, changes in the fair value are adjusted through income. The fair values of the outstanding derivatives are recorded on the balance sheet as assets (if the derivatives are in a gain position) or liabilities (if the derivatives are in a loss position). The fair values will also be classified as short-term or long-term depending upon their maturity dates.
 
The outstanding foreign currency forward contracts had a notional value of $23.5 million and a net fair value of $0.8 million as of July 2, 2010. The fair value included contracts at a gain of $1.0 million recorded in prepaid expenses and contracts at a loss of $0.2 million recorded in other liabilities and accrued items. All of these contracts were designated as and effective as cash flow hedges. There was no ineffectiveness associated with the outstanding foreign currency derivatives.
 
A summary of the hedging relationships of the outstanding derivative financial instruments designated as cash flow hedges as of July 2, 2010 and July 3, 2009 and the amounts transferred into income for the second quarter and first half then ended is as follows:
 
                                 
    Second Quarter Ended     First Half Ended  
    July 2,
    July 3,
    July 2,
    July 3,
 
(Dollars in Thousands)   2010     2009     2010     2009  
   
 
Derivative in Cash Flow Hedging Relationship
    Foreign Currency
Contracts
      Foreign Currency
Contracts
      Foreign Currency
Contracts
      Foreign Currency
Contracts
 
Effective Portion of Hedge:
                               
Gain (Loss) Recognized in OCI at the End of the Period
                               
Forward contracts
  $ 803     $ (633 )                
Options (collars)
                           
                                 
Total
  $ 803     $ (633 )                
Location of Gain (Loss) Reclassified from OCI into Income
    Other-net       Other-net       Other-net       Other-net  
Amount of Gain (Loss) Reclassified from OCI into Income
                               
Forward contracts
  $ 398     $ 467     $ 388     $ 267  
Options (collars)
                      212  
                                 
Total
  $ 398     $ 467     $ 388     $ 479  
Ineffective Portion of Hedge and Amounts Excluded from Effectiveness Testing:
                               
Location of Gain (Loss) Recognized in Income on Derivative
    Other-net       Other-net       Other-net       Other-net  
Amount of Gain (Loss) Recognized in Income on Derivative
  $     $     $     $  
 
The Company secured a debt obligation with an embedded copper derivative in October 2009. The derivative provides an economic hedge for the Company’s copper inventory against movements in the market price of copper. However, the derivative does not qualify as a hedge for accounting purposes and changes in its fair value are charged against income in the current period. In the first quarter 2010, the Company secured forward contracts to reduce the variability of the charges against income due to movements in the derivative’s fair value. The net ineffectiveness on the embedded derivative and the forward contract was zero in the second quarter 2010 and $0.5 million in the first half of 2010. The ineffectiveness was recorded in other-net on the Consolidated Statement of Income and Loss. The forward contract and embedded copper derivative outstanding at the end of the second quarter 2010 mature in the third quarter 2010.
 
The Company expects to relieve the entire balance from OCI and credit other-net on the Consolidated Statement of Income and Loss in the twelve month period beginning July 3, 2010.


11


 

Item 2.   Management’s Discussion and Analysis of Financial Condition and Results of Operations
 
Overview
 
We are an integrated producer of high performance advanced engineered materials used in a variety of electrical, electronic, thermal and structural applications. Our products are sold into numerous markets, including telecommunications and computer, aerospace and defense, automotive electronics, industrial components, appliance, medical and data storage.
 
Sales declined in 2009 primarily as a result of the global economic crisis, but have subsequently rebounded and sales in each of the first two quarters of 2010 established record highs. Sales of $325.9 million in the second quarter 2010 were 87% higher than sales in the second quarter 2009 while sales of $621.0 million in the first half of 2010 were more than double the sales in the first half of 2009. The sales growth in the second quarter and first half of 2010 over the respective periods in 2009 was due to a combination of improved market demand, two acquisitions, higher metal prices and other factors. Sales order entry rates remained strong throughout the first half of 2010.
 
In the first quarter 2010, we acquired all of the outstanding capital stock of Academy Corporation (Academy) for an adjusted purchase price of $21.0 million in cash. This acquisition came on the heels of our acquisition of Barr Associates, Inc. (Barr) in the fourth quarter 2009 for $55.2 million in cash. Both acquisitions were accretive to earnings in each of the first two quarters of 2010.
 
Gross margin of $55.9 million in the second quarter 2010 was a $33.7 million increase over the second quarter 2009 largely due to the higher sales volume and improved manufacturing efficiencies. Cost containment programs implemented in 2009 as a result of the downturn in sales in that year also provided a benefit to margins and operating profit as resources have not been added back proportionately with the increase in sales.
 
Operating profit was a very strong $20.5 million in the second quarter while operating profit of $33.7 million in the first half of 2010 was a $46.7 million improvement over the loss of $13.0 million in the first half of 2009. Diluted earnings per share of $0.67 in the second quarter and $1.00 in the first half of 2010 were significant improvements over the losses generated in the comparable periods of 2009.
 
The working capital investment in accounts receivable and inventory increased in the first half of 2010 due to the higher level of business activity. An increase in debt of $56.0 million in the first half of 2010 was used to finance the acquisition of Academy, capital expenditures of $17.3 million and the cash used in operations of $20.7 million.
 
Results of Operations
 
                                 
    Second Quarter Ended   First Half Ended
    July 2,
  July 3,
  July 2,
  July 3,
(Millions, except per share data)   2010   2009   2010   2009
 
 
Sales
  $ 325.9     $ 174.1     $ 621.0     $ 309.5  
Operating profit (loss)
    20.5       (1.6 )     33.7       (13.0 )
Income (loss) before income taxes
    19.8       (1.8 )     32.4       (13.6 )
Net income (loss)
    13.7       (0.8 )     20.4       (8.9 )
Diluted earnings per share
  $ 0.67     $ (0.04 )   $ 1.00     $ (0.44 )
 
Sales of $325.9 million in the second quarter 2010 grew $151.8 million, or 87%, from sales of $174.1 million in the second quarter 2009. For the first six months of the year, sales of $621.0 million in 2010 were a $311.5 million improvement over sales of $309.5 million in 2009.
 
Demand from the majority of our key markets has improved during the second quarter and first half of 2010. Increased demand for consumer electronic applications, including handsets and other wireless devices, within the telecommunications and computer market was an integral part of our sales growth in the second quarter and first half of 2010. Demand from portions of the defense market, which had softened in the second half of 2009, improved in the second quarter 2010 but was still slightly below the second quarter 2009 levels. Within the energy market,


12


 

demand for oil and gas applications was extremely strong in the second quarter 2010. The automotive electronic and commercial aerospace markets have also been very solid during the first half of 2010.
 
Demand had fallen significantly across many of our key markets in the first quarter 2009 as a result of the global economic crisis. We believe that the demand for our products fell further than the decline in end-use consumer spending due to excess inventories in the down-stream supply chain at that time. While it appears that the growth in demand since the first quarter 2009 was driven largely by improved market and global economic conditions, a portion of our sales growth in the first quarter 2010 may have been due to a replenishment of inventories in the supply chain that were drawn down throughout 2009.
 
Sales from Barr and Academy, which were acquired subsequent to the second quarter 2009, accounted for approximately 32% of the sales growth in the second quarter 2010 over the second quarter 2009 and 35% of the sales growth in the first half of 2010 over the first half of 2009. A significant portion of Academy’s sales is a precious metal pass-through.
 
We use gold, silver, platinum, palladium, copper and ruthenium in the manufacture of various products. Our sales are affected by the prices for these metals, as changes in our purchase price are passed on to our customers in the form of higher or lower selling prices. The average prices between periods for each of these metals increased during the second quarter 2010 as compared to the second quarter 2009. The net impact of the change in metal prices was an estimated $29.0 million increase in sales in the second quarter 2010 from the second quarter 2009 and an estimated $48.1 million increase in sales in the first half of 2010 from the first half of 2009.
 
Domestic sales grew 103% in the second quarter 2010 and 113% in the first half of 2010 from the comparable periods in 2009. International sales were 58% higher in the second quarter 2010 and 76% higher in the first half of 2010 than the same periods in 2009. Domestic sales include the majority of the sales from the two acquisitions as well as the majority of the metal price increase between periods. International sales were 29% of total sales in the first half of 2010 and 33% of sales in the first half of 2009. Sales to Asia and Europe have grown at a similar rate in the first half of 2010.
 
Gross margin was $55.9 million, or 17% of sales, in the second quarter 2010 compared to $22.1 million, or 13% of sales, in the second quarter 2009. For the first six months of the year, gross margin improved from $36.7 million in 2009 to $105.2 million in 2010. Gross margin was 17% of sales in the first half of 2010 and 12% of sales in the first half of 2009.
 
The increase in gross margin dollars in the second quarter and first half of 2010 over the same periods in 2009 was predominately due to the higher sales volume. The higher production volumes also lead to increased manufacturing efficiencies and machine utilization rates which in turn improved margins. The margin growth was hampered by lower defense and medical market sales in the first two quarters of 2010 as sales into those markets generally carry higher margins.
 
Manufacturing overhead was higher in the second quarter 2010 than the second quarter 2009; however, spending levels have not increased proportionately with the sales growth nor have resources been added back to the levels prior to the downturn in the fourth quarter 2008. Manufacturing overhead at the existing operations in the first half of 2010 was 1% higher than the first half of 2009.
 
The comparison of gross margin between the first half of 2010 and 2009 was affected by a $0.8 million lower of cost or market charge recorded in the first half of 2009.
 
The gross margin as a percent of sales in the second quarter and first half of 2010, while higher than the respective periods in 2009, was adversely affected by the increased metal pass-through in sales as a result of the Academy acquisition and higher metal prices in the first half of 2010.
 
In the first quarter 2009, we determined that the domestic defined benefit pension plan was curtailed due to a significant reduction in force and, as a result of the curtailment and the associated remeasurement, we recorded a $1.1 million one-time benefit in that period, $0.8 million of which was recorded against cost of sales and the balance against selling, general and administrative expenses on the Consolidated Statement of Income and Loss. In addition to the one-time benefit recorded in the first quarter 2009, the expense comparison between 2010 and 2009 was


13


 

affected by an increase of $0.2 million in the ongoing quarterly expense associated with the domestic pension plan due to changes in plan assumptions and performance and other factors.
 
Selling, general and administrative (SG&A) expenses were $30.6 million in the second quarter 2010, an increase of $9.9 million over the total expense of $20.7 million in the second quarter 2009. SG&A expenses totaled $61.0 million in the first six months of 2010 compared to $43.2 million in the first six months of 2009. SG&A expenses were 10% of sales in the first six months of 2010 and 14% of sales in the first six months of 2009. The lower percentage in 2010 was due in part to the significant increase in sales.
 
The higher dollar amount of the expense in the second quarter and first six months of 2010 versus the comparable periods of 2009 was due to a combination of the effect of the acquisitions, incentive compensation and other factors.
 
The expenses incurred by Barr and Academy accounted for 39% of the increase in the second quarter and 45% of the increase in the first six months of the year.
 
Incentive compensation expense under cash-based plans was $3.7 million higher in the second quarter 2010 than the second quarter 2009 and $6.7 million higher in the first half of 2010 than the first half of 2009 due to the improved levels of profitability in the current year relative to the plan targets. Share-based compensation expense in the second quarter 2010 was unchanged from the second quarter 2009 and $0.4 million higher in the first half of 2010 than the first half of 2009.
 
The expense for a supplemental retirement plan was $0.2 million higher in the second quarter and $0.3 million higher in the first half of 2010 than the same periods in 2009.
 
Sales commissions from various units were higher in the second quarter and first half of 2010 than the comparable periods in 2009 due to the increased sales.
 
Various cost reduction activities, including manpower reductions, were implemented in 2009 as a result of the operating losses in that year. Some resources, but not all, have been added back in the first two quarters 2010 in order to support the significant sales growth.
 
Employee compensation levels, which were reduced up to 10% in 2009 in response to the operating losses in that year, were restored to their prior levels during the fourth quarter 2009 due to improving business conditions. The company match for the 401(k) plan, which also was eliminated in 2009 as part of the cost reduction efforts, was partially restored beginning in the second quarter 2010.
 
Research and development (R&D) expenses were $1.8 million in the second quarter 2010 compared to $1.5 million in the second quarter 2009. R&D expenses were $3.5 million in the first half of 2010, an increase of $0.3 million over the expense of $3.2 million in the first half of 2009. We continued to invest in process and product improvement efforts during the first half of 2010 in order to enhance long-term growth opportunities.
 
Other-net expense for the second quarter and first half of 2010 and 2009 is summarized as follows:
 
                                 
    Second Quarter Ended     First Half Ended  
    July 2,
    July 3,
    July 2,
    July 3,
 
(Millions)   2010     2009     2010     2009  
   
 
Income (expense)
                               
Exchange/translation gain (loss)
  $ 0.3     $ 0.3     $ (0.3 )   $ 0.6  
Amortization of intangible assets
    (1.6 )     (0.9 )     (3.1 )     (1.7 )
Metal financing fees
    (1.3 )     (0.7 )     (2.4 )     (1.6 )
Derivative ineffectiveness
                (0.5 )      
Other items
    (0.3 )     (0.2 )     (0.7 )     (0.5 )
                                 
Total
  $ (2.9 )   $ (1.5 )   $ (7.0 )   $ (3.2 )
 
Exchange and translation gains and losses are a function of the movement in the value of the U.S. dollar versus certain other currencies and in relation to the strike prices in currency hedge contracts.


14


 

The amortization of intangible assets was higher in both the second quarter and first half of 2010 than the comparable periods in 2009 due to the amortization of the intangible assets acquired with Barr in the fourth quarter 2009 and the estimated amortization on the intangible assets acquired with Academy in the first quarter 2010.
 
The metal financing fees were higher in the second quarter and first half of 2010 than the respective periods in 2009 as a result of an increase in the quantity and price of the metal on hand.
 
Other-net also includes bad debt expense, gains and losses on the disposal of fixed assets, cash discounts and other non-operating items.
 
Operating profit was $20.5 million in the second quarter 2010 and $33.7 million in the first six months of 2010. In 2009, we generated an operating loss of $1.6 million in the second quarter and $13.0 million in the first six months of the year. The improved profitability was driven primarily by the margin benefits from the significant increase in sales and other factors. While certain expenses have increased, various cost containment programs implemented in 2009 still had a positive impact on profitability in the second quarter and first half of 2010.
 
Interest expense — net of $0.7 million in the second quarter 2010 and $1.3 million in the first six months of 2010 was approximately twice the net expense from the comparable periods in 2009. The increased expense in both periods was primarily due to the higher debt levels in the first half of 2010 as the effective borrowing rate was lower in the second quarter and first half of 2010 than the respective periods of 2009. Interest capitalized in association with long-term capital expenditures was slightly lower in the second quarter and first half of 2010 than the same periods in 2009.
 
The income (loss) before income taxes and the income tax expense (benefit) for the second quarter and first six months of 2010 and 2009 were as follows:
 
                                 
    Second Quarter Ended   First Half Ended
    July 2,
  July 3,
  July 2,
  July 3,
(Dollars in Millions)   2010   2009   2010   2009
 
 
Income (loss) before income taxes
  $ 19.8     $ (1.8 )   $ 32.4     $ (13.6 )
Income tax expense (benefit)
    6.1       (1.0 )     12.0       (4.6 )
Effective tax rate
    30.7 %     (57.1 %)     36.9 %     (34.1 %)
 
The effects of percentage depletion, foreign source income, the production deduction, executive officer compensation and other items were major factors for the difference between the effective and statutory rates in the second quarter and first six months of 2010.
 
The tax expense of $12.0 million in the first six months of 2010 also included a discrete item of $1.4 million recorded in the first quarter 2010 for the reduction of a deferred tax asset as a result of the recently enacted Patient Protection and Affordable Care Act, as amended by the Health Care and Education Reconciliation Act. Beginning in 2013, we will no longer be able to claim an income tax deduction for prescription drug benefits provided to our retirees and reimbursed under the Medicare Part D retiree drug subsidy program. While this tax increase does not take effect until 2013, accounting standards require that the carrying value of a deferred tax asset be adjusted in the period in which legislation changing the applicable tax law is enacted.
 
The difference between the effective and statutory rates in the second quarter and first six months of 2009 was due to the effects of percentage depletion, foreign source income and other items. There were no material discrete events affecting the tax rate in the second quarter or first six months of 2009.
 
Net income was $13.7 million (or $0.67 per share, diluted) in the second quarter 2010 compared to a net loss of $0.8 million (or $0.04 per share, diluted) in the second quarter 2009. For the first half of 2010, net income was $20.4 million (or $1.00 per share, diluted) versus a net loss of $8.9 million (or $0.44 per share, diluted) in the first half of 2009.
 
Segment Results
 
We have four reportable segments. The results for BEM Services, Inc., a wholly-owned subsidiary that provides administrative and financial services on a cost-plus basis to other units within the organization, and other


15


 

corporate costs are included in the All Other column of our segment reporting. See Note F to the Consolidated Financial Statements.
 
The operating loss within All Other was $0.5 million higher in the second quarter 2010 than the second quarter 2009 due to an increase in retirement plan costs, corporate administrative costs and other factors. The All Other operating loss was $1.9 million higher in the first half of 2010 than the first half of 2009. The comparison between the first half of 2010 and the first half of 2009 was affected by the one-time $1.1 million curtailment gain recorded in the first quarter 2009 and the $0.5 million derivative ineffectiveness recorded in the first quarter 2010. The increase in corporate incentive compensation and other expense items was largely offset by an increase in charges out to the business units in the second quarter and first half of 2010.
 
The operating profit for each of the four reportable segments improved in the second quarter and first half of 2010 over the respective periods in the prior year with Specialty Engineered Alloys showing the largest improvement.
 
Advanced Material Technologies and Services
 
                                 
    Second Quarter Ended   First Half Ended
    July 2,
  July 3,
  July 2,
  July 3,
(Millions)   2010   2009   2010   2009
 
 
Sales
  $ 213.9     $ 112.3     $ 416.9     $ 192.3  
Operating profit
    9.2       8.4       17.7       9.1  
 
Advanced Material Technologies and Services manufactures precious, non-precious and specialty metal products, including vapor deposition targets, frame lid assemblies, clad and precious metal preforms, high temperature braze materials, ultra-fine wire, advanced chemicals, optics, performance coatings and microelectronic packages. These products are used in wireless, semiconductor, photonic, hybrid and other microelectronics applications within the telecommunications and computer market. Other key markets for these products include medical, data storage, defense, security, solar energy and architectural glass. Advanced Material Technologies and Services also has metal cleaning operations and in-house refineries that allow for the reclaim of precious metals from internally generated or customers’ scrap. Due to the high cost of precious metal products, we emphasize quality, delivery performance and customer service in order to attract and maintain applications. This segment has domestic facilities in New York, Connecticut, Wisconsin, New Mexico, Massachusetts and California and international facilities in Asia and Europe.
 
Sales from Advanced Material Technologies and Services grew 91% from $112.3 million in the second quarter 2009 to $213.9 million in the second quarter 2010 while sales in the first half of the year more than doubled, growing from $192.3 million in 2009 to $416.9 million in 2010.
 
Advanced Material Technologies and Services adjusts its selling prices daily to reflect the current cost of the precious and certain other metals that are sold. The cost of the metal is generally a pass-through to the customer and a margin is generated on the fabrication efforts irrespective of the type or cost of the metal used in a given application. Therefore, the cost and mix of metals sold will affect sales but not necessarily the margins generated by those sales. The net higher average prices of gold, silver, platinum, palladium and ruthenium accounted for an estimated $25.3 million of the $101.6 million increase in sales in the second quarter 2010 and $40.4 million of the $224.6 million increase in sales in the first half of 2010 compared to the respective periods in 2009.
 
Barr and Academy, the two recent acquisitions, are included in the Advanced Material Technologies and Services segment, and accounted for just under half of the growth in the segment’s sales in the both the second quarter and first half of 2010 from the respective periods in 2009. Barr produces thin film optical filters for the defense, medical, telecommunications and other markets. Barr combined with Thin Film Technology, Inc. (TFT), which we acquired in 2005, allow us to offer a variety of solutions for precision thin film optical coating applications over a wide spectrum of wavelengths. Academy manufactures sputtering targets, sheet, fine wire, rod and powder used in architectural glass, medical, solar and electronic applications. Academy also has precious metal refine capabilities and its operations are complementary to our Buffalo, New York operations.


16


 

Sales of precious metal products manufactured in Buffalo, including targets and lids, improved in the second quarter and first half of 2010 over the same periods last year as a result of increased demand for wireless, handset, LED and other microelectronic applications. The sales order entry for these products was strong during the first half of 2010.
 
Sales of advanced chemicals also grew in the second quarter and first half of 2010 over the prior year due to improved demand for semiconductor and security applications along with development of materials for new LED applications. Order entry for these products remained strong throughout the second quarter 2010.
 
Sales of electronic packages, one of this segment’s smaller product lines, increased 26% in the second quarter 2010 and 52% in the first half of 2010 over the respective periods in 2009 as a result of improved demand for telecommunications infrastructure applications in Asia.
 
Demand for materials for magnetic head applications within the data storage market showed good improvement in the second quarter 2010 over the second quarter 2009. The growth in the first half of 2010 was more modest. Media sales to the data storage market remained weak in each of the first two quarters of 2010.
 
Sales of precision precious metal coated polymer films declined 21% in the second quarter 2010 and 19% in the first half of 2010 from the respective periods in 2009. Lower manufacturing yields and the inability to hold tolerances resulted in missed sales and the loss of a portion of the business to our competitor. New equipment has been installed that is designed to improve yields and the quality of our product. While qualification work and test production runs using the new equipment have begun, sales of polymer films are anticipated to remain soft in the third quarter 2010. The majority of these products are sold into the medical market.
 
Sales of lids from TFT decreased approximately 50% in both the second quarter and first half of 2010 from the comparable periods last year. Sales of these products had been strong in the first half of 2009. However, in the third quarter 2009, a major defense customer lost the application to its competitor for reasons unrelated to our product. While TFT’s sales into the medical market have remained solid, we have been unable to generate new applications sufficient to offset the significant decline in defense sales thus far.
 
The gross margin on sales by Advanced Material Technologies and Services was $27.4 million (13% of sales) in the second quarter 2010 compared to $18.3 million (16% of sales) in the second quarter 2009. Gross margin of $54.5 million in the first half of 2010 grew $24.5 million over the gross margin of $30.0 million in the first half of 2009. The gross margin was 13% of sales in the first half of 2010 and 16% of sales in the first half of 2009.
 
The increase in the margin dollars in the second quarter and first half of 2010 was largely due to the increased volume of business from the acquisitions and various portions of the existing operations. The margin rate was lower in the second quarter and first half of 2010 as a result of the higher metal prices and the lower margin percent generated by the two acquisitions due in part to the high metal content in their sales. The margin dollars and rate in the second quarter and first half of 2010 were also reduced by the decline in medical and defense sales from existing operations that typically generated higher margins. The lower yields on polymer film products added to costs and reduced margins in the first half of 2010 as well.
 
Manufacturing overhead costs from existing operations, after being unchanged in the first quarter 2010 from the first quarter 2009, increased in the second quarter 2010 in part to support the net increase in sales. The gross margin in the first half of 2010 was reduced by inventory write-downs and yield costs of $0.6 million recorded in the first quarter 2010 while gross margin in the first half of 2009 was reduced by $1.4 million for lower of cost or market and other inventory charges recorded in that period.
 
Total SG&A, R&D and other-net expenses were $18.1 million (8% of sales) in the second quarter 2010 compared to $9.9 million (9% of sales) in the second quarter 2009. These expenses totaled $36.8 million (9% of sales) in the first half of 2010, an increase of $15.9 million from the total of $20.9 million (11% of sales) in the first half of 2009.
 
The acquisition of Barr and Academy was the main cause for the higher expenses, accounting for approximately half of the increase in the first half of 2010 versus the first half of 2009. Incentive compensation expense was higher in each of the first two quarters of 2010 than the same periods in 2009 as were corporate charges. Metal financing fees were $0.5 million higher in the second quarter and $0.8 million higher in the first half of 2010 than


17


 

the respective periods of 2009 due to the increased value of metal on hand. Amortization expense grew $0.7 million in the second quarter and $1.3 million in the first half of 2010 over the comparable periods in 2009 as a result of the intangible assets acquired with Barr and Academy.
 
Operating profit from Advanced Material Technologies and Services was $9.2 million in the second quarter 2010 versus $8.4 million in the second quarter 2009. For the first half of the year, operating profit was $17.7 million (4% of sales) in 2010 and $9.1 million (5% of sales) in 2009. The improvement in profitability in both the second quarter and first half of 2010 was due to the profit generated by the two acquisitions and the margin benefit generated by the additional sales from the existing operations offset in part by an increase in various expenses and other factors. The growth in operating profit was reduced by the unfavorable mix effect from the lower sales to the defense and medical markets in the second quarter and first half of 2010.
 
Specialty Engineered Alloys
 
                                 
    Second Quarter Ended   First Half Ended
    July 2,
  July 3,
  July 2,
  July 3,
(Millions)   2010   2009   2010   2009
 
 
Sales
  $ 77.9     $ 41.2     $ 141.2     $ 78.1  
Operating profit (loss)
    8.5       (9.3 )     11.8       (20.2 )
 
Specialty Engineered Alloys manufactures and sells three main product families:
 
Strip products, the larger of the product families, include thin gauge precision strip and thin diameter rod and wire. These copper and nickel beryllium alloys provide a combination of high conductivity, high reliability and formability for use as connectors, contacts, switches, relays and shielding. Major markets for strip products include telecommunications and computer, automotive electronics, appliance and medical;
 
Bulk products are copper and nickel-based alloys manufactured in plate, rod, bar, tube and other customized forms that, depending upon the application, may provide superior strength, corrosion or wear resistance, thermal conductivity or lubricity. The majority of bulk products contain beryllium. Applications for bulk products include oil and gas drilling components, bearings, bushings, welding rods, plastic mold tooling and undersea telecommunications housing equipment; and,
 
Beryllium hydroxide is produced by Brush Resources Inc., a wholly owned subsidiary, at its milling operations in Utah from its bertrandite mine and purchased beryl ore. The hydroxide is used primarily as a raw material input for strip and bulk products as well as by the Beryllium and Beryllium Composites segment.
 
Strip and bulk products are manufactured at facilities in Ohio and Pennsylvania and are distributed worldwide through a network of company-owned service centers and outside distributors and agents.
 
Sales by Specialty Engineered Alloys of $77.9 million in the second quarter 2010 were $36.7 million, or 89%, higher than sales of $41.2 million in the second quarter 2009. Sales of $141.2 million in the first six months of 2010 were 81% higher than sales of $78.1 million in the first six months of 2009. Sales of both strip and bulk products improved significantly in the second quarter and first six months of 2010 over the levels in the comparable periods of 2009. Sales of hydroxide from the Utah operations totaled $4.2 million in the second quarter 2010 and $5.9 million in the second quarter 2009. There were no hydroxide sales in either the first quarter 2010 or 2009.
 
Strip volumes in both the second quarter and first half of 2010 were nearly double the volumes shipped in the comparable periods of 2009. The growth in both the second quarter and first six months of 2010 was largely due to improved demand from the telecommunications and computer market, particularly for consumer electronic applications, including PDAs and the latest generation of smart phones. Demand from the automotive electronic market has remained solid in the first half of 2010.
 
Bulk product volumes were 94% higher in the second quarter 2010 and 62% higher in the first six months of 2010 than the respective periods of the prior year. This growth was due to higher shipments for oil and gas applications, which established a record high in the quarter, and improved shipments for commercial aerospace applications. Offsetting a portion of the growth in these areas was lower shipments for undersea telecommunication


18


 

applications as new undersea cable projects, despite the increase in market demand, have been delayed, partially due to financing issues.
 
Higher metal prices accounted for an estimated $3.8 million of the $36.7 million difference in sales between the second quarter 2010 and the second quarter 2009 and $7.8 million of the $63.1 million difference in sales between the first six months of 2010 and the first six months of 2009.
 
The gross margin on sales from Specialty Engineered Alloys was $19.5 million (25% of sales) in the second quarter 2010 compared to $0.2 million (0.4% of sales) in the second quarter 2009. The gross margin was $34.6 million in the first half of 2010, a $35.7 million improvement over the negative gross margin of $1.1 million in the first half of 2009.
 
The growth in the gross margin in the second quarter and first half of 2010 over the respective periods of 2009 was largely due to the higher sales and production volumes. Manufacturing performance has also improved in the first half of 2010 as have machine utilization rates. A favorable change in product mix as well as higher average pricing levels also contributed to the margin improvements in the second quarter and first half of 2010.
 
We recorded a $1.4 million benefit as the estimated margin impact of the projected depletion of a last-in, first out (LIFO) inventory layer associated with the second quarter 2010. We recorded a $1.6 million LIFO benefit in the first quarter 2010. We do not anticipate that this margin benefit will recur in 2011.
 
Total SG&A, R&D and other-net expenses were $11.0 million (14% of sales) in the second quarter 2010 and $9.4 million (23% of sales) in the second quarter 2009. For the first half of 2010, these expenses totaled $22.8 million (16% of sales) compared to $19.0 million (24% of sales) in the first half of 2009.
 
Corporate charges, incentive compensation expense and foreign currency exchange losses all increased in the second quarter and first half 2010 over the respective periods in 2009 while the other SG&A and R&D expenses incurred by Specialty Engineered Alloys combined for a net decrease from the year-ago periods. The expense in the first half of 2009 included $0.5 million of severance costs.
 
Specialty Engineered Alloys generated an operating profit of $8.5 million in the second quarter 2010, a $17.8 million improvement over the $9.3 million operating loss generated in the second quarter 2009. Operating profit was $11.8 million in the first half of 2010 compared to an operating loss of $20.2 million in the first half of 2009. The growth in operating profit resulted from the margin benefit from the higher sales volume, production improvements and the estimated LIFO benefit offset in part by higher expenses.
 
Beryllium and Beryllium Composites
 
                                 
    Second Quarter Ended   First Half Ended
    July 2,
  July 3,
  July 2,
  July 3,
(Millions)   2010   2009   2010   2009
 
 
Sales
  $ 15.7     $ 13.1     $ 28.8     $ 26.1  
Operating profit
    2.1       1.0       4.2       2.9  
 
Beryllium and Beryllium Composites manufactures beryllium-based metals and metal matrix composites in rod, sheet, foil and a variety of customized forms at the Elmore, Ohio and Fremont, California facilities. These materials are used in applications that require high stiffness and/or low density and they tend to be premium priced due to their unique combination of properties. This segment also manufactures beryllia ceramics through our wholly owned subsidiary, Brush Ceramic Products Inc., in Tucson, Arizona. Defense and government-related applications, including aerospace, is the largest market for Beryllium and Beryllium Composites, while other markets served include medical, telecommunications and computer, electronics (including acoustics), optical scanning and general industrial products.
 
Sales by Beryllium and Beryllium Composites were $15.7 million in the second quarter 2010, a 20% increase from sales of $13.1 million in the second quarter 2009. Sales of $28.8 million in the first half of 2010 were 10% higher than sales of $26.1 million in the first half of 2009.
 
Sales for defense and government-related applications from the Elmore facility improved slightly in the second quarter 2010 over the second quarter 2009 but were up approximately 32% compared to the first quarter


19


 

2010. Sales for commercial applications, including beryllium foil and medical and analytical x-ray assemblies, also grew in the second quarter and first half of 2010 over the respective periods in the prior year.
 
Beryllia ceramic sales, while a smaller portion of this segment’s sales, were strong in the second quarter 2010 and were 46% higher in the first half of 2010 than the first half of 2009. This growth is due to improved demand for telecommunications infrastructure applications as well as laser tube applications.
 
The order entry rate, which tends to be choppy because of the nature of the defense business, was slightly below the level of sales in the first half of 2010.
 
Beryllium and Beryllium Composites generated a gross margin of $5.1 million (33% of sales) in the second quarter 2010, an improvement over the gross margin of $3.4 million (26% of sales) generated in the second quarter 2009. For the first half of the year, the gross margin was $9.4 million (33% of sales) in 2010 and $8.1 million (31% of sales) in 2009.
 
The growth in the gross margin in the second quarter and first half of 2010 from the respective periods in 2009 was due to a combination of the higher sales volume, scrap reclamation benefits and lower manufacturing overhead costs. These benefits were partially offset by an unfavorable change in product mix in both the second quarter and first half of 2010 versus the comparable periods in 2009. Lower manufacturing yields on welded products also negatively impacted gross margin in the second quarter 2010. However, process improvements were implemented and yields improved in the second quarter 2010 over the first quarter 2010.
 
SG&A, R&D and other-net expenses for Beryllium and Beryllium Composites totaled $3.1 million, or 20% of sales, in the second quarter 2010 and $2.4 million, or 18% of sales, in the second quarter 2009. For the first half of the year, expenses totaled $5.1 million (18% of sales) in 2010 and $5.2 million (20% of sales) in 2009. Incentive compensation expense, corporate charges and other miscellaneous selling expenses were higher in the second quarter 2010 than the second quarter 2009.
 
Operating profit for Beryllium and Beryllium Composites of $2.1 million in the second quarter 2010 was more than double the operating profit of $1.0 million in the second quarter 2009. For the first half of the year, operating profit improved from $2.9 million in 2009 to $4.2 million in 2010. Operating profit was 15% of sales in the first half of 2010 and 11% of sales in the first half of 2009.
 
Engineered Material Systems
 
                                 
    Second Quarter Ended   First Half Ended
    July 2,
  July 3,
  July 2,
  July 3,
(Millions)   2010   2009   2010   2009
 
 
Sales
  $ 18.4     $ 7.5     $ 33.9     $ 12.9  
Operating profit (loss)
    2.0       (0.8 )     3.1       (3.5 )
 
Engineered Material Systems includes clad inlay and overlay metals, precious and base metal electroplated systems, electron beam welded systems, contour profiled systems and solder-coated metal systems. These specialty strip metal products provide a variety of thermal, electrical or mechanical properties from a surface area or particular section of the material. Our cladding and plating capabilities allow for a precious metal or brazing alloy to be applied to a base metal only where it is needed, reducing the material cost to the customer as well as providing design flexibility. Major applications for these products include connectors, contacts and semiconductors. The largest markets for Engineered Material Systems are automotive electronics, telecommunications and computer and data storage, while the energy, defense and medical markets offer further growth opportunities. Engineered Material Systems are manufactured at our Lincoln, Rhode Island facility.
 
Sales from Engineered Material Systems of $18.4 million in the second quarter 2010 were a 146% improvement over sales of $7.5 million in the second quarter 2009. For the first half of the year, sales grew $21.0 million, from $12.9 million in 2009 to $33.9 million in 2010. The volume growth in the second quarter and first half of 2010 was slightly higher than the growth in the sales value between periods.
 
Sales have grown for the last five consecutive quarters. In addition, the order entry rate exceeded sales in each of those five quarters.


20


 

The sales growth in the second quarter and first half of 2010 was across each of this segment’s major product lines. Demand from the key markets served has strengthened as well. Disk drive arm sales for data storage applications were approximately 60% higher in the second quarter 2010 than the second quarter 2009 and sales for the first half of 2010 were more than double the sales in the first half of 2009. Sales for new product initiatives, including applications in the energy and medical markets, contributed to the sales growth in the first half of 2010 as well.
 
Engineered Material Systems generated a gross margin of $4.3 million, or 23% of sales, in the second quarter 2010 compared to a gross margin of $0.5 million, or 7% of sales, in the second quarter 2009. Gross margin was $7.3 million, or 22% of sales, in the first half of 2010, an improvement of $7.9 million over the negative gross margin of $0.6 million in the first half of 2009.
 
The improvement in gross margin in the second quarter and first half of 2010 over the respective periods in the prior year resulted primarily from the significant increase in sales volume. The resulting higher production volumes resulted in improved manufacturing efficiencies as well. In addition, manufacturing costs, which were significantly reduced throughout 2009 due to the low sales volumes, have not been added back proportionately with the increase in sales volume in the first half of 2010.
 
Total SG&A, R&D and other-net expenses of $2.2 million in the second quarter 2010 were $0.9 million higher than the second quarter 2009 while the expense total of $4.2 million in the first half of 2010 was $1.4 million higher than the first half of 2009.
 
After implementing significant cost reduction initiatives in 2009 due to the lower sales that year, resources have been added back in order to support the growth in sales in each of the first two quarters of 2010. Sales-related expenses, including commissions, were higher in the first half of 2010 than the first half of 2009. An increase in incentive compensation expense also contributed to the higher expense in both the second quarter and first half of 2010. Corporate charges were slightly higher in the first half of 2010 than the first half of 2009 as was net-other expense due to an increase in metal financing fees and a small loss on the disposal of obsolete equipment.
 
Engineered Material Systems generated a profit of $2.0 million in the second quarter 2010 compared to an operating loss of $0.8 million in the second quarter 2009. The operating profit was $3.1 million in the first half of 2010, an improvement of $6.6 million over the operating loss of $3.5 million in the first half of 2009. This improvement resulted from the margin benefit from the higher sales and other factors offset in part by an increase in expenses. Operating profit has improved each of the last five consecutive quarters.
 
Legal
 
One of our subsidiaries, Brush Wellman Inc., is a defendant in proceedings in various state and federal courts brought by plaintiffs alleging that they have contracted chronic beryllium disease or other lung conditions as a result of exposure to beryllium. Plaintiffs in beryllium cases seek recovery under negligence and various other legal theories and seek compensatory and punitive damages, in many cases of an unspecified sum. Spouses, if any, claim loss of consortium.
 
The following table summarizes the associated activity with beryllium cases.
 
                 
    Quarter Ended
    July 2, 2010   Apr. 2, 2010
 
 
Total cases pending
    2       4  
Total plaintiffs
    6       8  
Number of claims (plaintiffs) filed during period ended
    1(1 )     0(0 )
Number of claims (plaintiffs) settled during period ended
    2(2 )     0(0 )
Aggregate cost of settlements during period ended (dollars in thousands)
  $ 0     $ 20  
Number of claims (plaintiffs) otherwise dismissed
    1(1 )     0(0 )
 
Settlement payment and dismissal for a single case may not occur in the same period. Two cases were technically settled and dismissed in the second quarter but the settlement payment was made in the first quarter.


21


 

Additional beryllium claims may arise. Management believes that we have substantial defenses in these cases and intends to contest the suits vigorously. Employee cases, in which plaintiffs have a high burden of proof, have historically involved relatively small losses to us. Third-party plaintiffs (typically employees of customers or contractors) face a lower burden of proof than do employees or former employees, but these cases are generally covered by varying levels of insurance.
 
Although it is not possible to predict the outcome of the litigation pending against our subsidiaries and us, we provide for costs related to these matters when a loss is probable and the amount is reasonably estimable. Litigation is subject to many uncertainties, and it is possible that some of these actions could be decided unfavorably in amounts exceeding our reserves. An unfavorable outcome or settlement of a pending beryllium case or additional adverse media coverage could encourage the commencement of additional similar litigation. We are unable to estimate our potential exposure to unasserted claims.
 
Based upon currently known facts and assuming collectibility of insurance, we do not believe that resolution of the current and future beryllium proceedings will have a material adverse effect on our financial condition or cash flow. However, our results of operations could be materially affected by unfavorable results in one or more of these cases.
 
The balances recorded on the Consolidated Balance Sheets associated with beryllium litigation were as follows:
 
                 
(Millions)
  July 2,
  Dec. 31,
Asset (liability)   2010   2009
 
 
Reserve for litigation
  $ (0.4 )   $ (0.6 )
Insurance recoverable
    0.1       0.3  
 
Regulatory Matters.  Standards for exposure to beryllium are under review by the United States Occupational Safety and Health Administration (OSHA) and by other governmental and private standard-setting organizations. One result of these reviews will likely be more stringent worker safety standards. Some organizations, such as the California Occupational Health and Safety Administration and the American Conference of Governmental Industrial Hygienists, have adopted standards that are more stringent than the current standards of OSHA. The development, proposal or adoption of more stringent standards may affect the buying decisions by the users of beryllium-containing products. If the standards are made more stringent and/or our customers or other downstream users decide to reduce their use of beryllium-containing products, our operating results, liquidity and financial condition could be materially adversely affected. The impact of this potential adverse effect would depend on the nature and extent of the changes to the standards, the cost and ability to meet the new standards, the extent of any reduction in customer use and other factors. The magnitude of this potential adverse effect cannot be estimated.
 
Financial Position
 
Net cash used in operating activities was $20.7 million in the first half of 2010 as net income and the effects of depreciation were more than offset by a net increase in working capital items, primarily accounts receivable and inventory. The working capital increased in order to support and as a result of the significant increase in sales in the first half of 2010.
 
Cash balances totaled $16.1 million as of the end of the second quarter 2010, an increase of $3.8 million from year-end 2009.
 
Accounts receivable of $145.3 million as of the end of the second quarter 2010 were $61.3 million, or 73%, higher than the balance as of December 31, 2009.
 
The growth in receivables was predominately due to sales in the second quarter 2010 being $110.8 million higher than sales in the fourth quarter 2009. The days sales outstanding (DSO), a measure of how quickly receivables are collected, slowed down approximately 1.5 days from the end of the fourth quarter 2009 to the end of the second quarter 2010 and had a minor impact on the increase in receivables. The second quarter 2010 DSO was still within our normal historical range and the change for the year appears to be due to business mix and the timing of payments and not related to any material collection difficulties. Despite the growth in receivables and the slightly


22


 

slower payments, bad debt expense in the first half of 2010 was relatively minor. We continued to aggressively monitor and manage our credit exposures in light of the volatile and uncertain economic climate.
 
Other receivables totaling $4.8 million as of the end of the second quarter 2010 primarily represented amounts outstanding for reimbursement of equipment purchased under a government contract. Outstanding receivables as of December 31, 2009 totaled $11.1 million, the majority of which was for reimbursement under this same contract.
 
Inventories were $140.3 million as of July 2, 2010, an increase of $10.2 million, or 8%, over the inventory balance as of December 31, 2009. Despite the increase in inventory value, the inventory turnover ratio, a measure of how quickly inventory is sold on average, improved as of the end of the second quarter 2010 from the year-end 2009 level as inventories have not been restocked at the same rate as the increase in sales.
 
Inventories within Advanced Material Technologies and Services grew approximately 8% in the first half of 2010, a portion of which is attributable to the acquisition of Academy. The inventory growth was less than the growth in sales volumes as the majority of this segment’s metal requirements are maintained through off-balance sheet financing arrangements.
 
Specialty Engineered Alloys’ inventory pounds on hand as of the end of the second quarter were 27% higher than year-end 2009, but this increase was also less than the growth in sales. The growth in copper pounds on hand was in consigned rather than owned pounds.
 
Inventories within Beryllium and Beryllium Composites and Engineered Material Systems also showed minor increases in order to support the higher business levels.
 
We use the last in, first out (LIFO) method for valuing a large portion of our domestic inventories. By so doing, the most recent cost of various raw materials, including gold, copper and nickel, is charged to cost of sales in the current period. The older, and often times lower, costs are used to value the inventory on hand. Therefore, current changes in the cost of raw materials subject to the LIFO valuation method have only a minimal impact on changes in the inventory carrying value.
 
Prepaid expenses were $29.2 million as of the end of the second quarter 2010, an increase of $1.2 million from year-end 2009. This difference was due to the change in the fair value of derivative financial instruments, an increase in miscellaneous prepaid taxes, the timing of payments and other items.
 
Capital expenditures for the first half of 2010 and 2009 are summarized as follows:
 
                 
    First Half  
(Millions)   2010     2009  
   
 
Capital expenditures
  $ 24.8     $ 16.1  
Mine development
    7.4       0.4  
                 
Subtotal
    32.2       16.5  
Reimbursement for spending under government contract
    14.9       10.2  
                 
Net spending
  $ 17.3     $ 6.3  
 
We have a contract with the U.S. Department of Defense (DoD) for the design and development of a new facility for the production of primary beryllium. The total cost of the project is estimated to be approximately $90.3 million; we will contribute land, buildings, research and development, technology and ongoing operations valued at approximately $23.2 million to the project. The DoD will reimburse us for the balance of the project cost. Reimbursements from the DoD are recorded as unearned income on the Consolidated Balance Sheets. We anticipate the facility will be completed in the second half of this year. We spent $18.2 million on this project (which is included in the $24.8 million figure in the table above) and received $14.9 million from the DoD in the first half of 2010 as our payments and the subsequent reimbursements do not necessarily occur in the same periods.
 
Our Utah operations are developing a new bertrandite ore mine using the open pit method. The pit should be complete in the fourth quarter 2010 with ore extraction scheduled to begin in the first quarter 2011.
 
The remainder of the capital spending was on isolated pieces of equipment and various infrastructure projects across the organization. The Elmore and Buffalo facilities had the highest levels of spending in the first half of 2010.


23


 

The Elmore spending included payments for a new degreaser, cranes and related equipment used in the manufacture of bulk products. In addition to small pieces of manufacturing equipment, the Buffalo spending also included amounts for a software implementation. We also invested in new equipment at Barr and Academy in the first half of 2010.
 
Other assets were $42.1 million at the end of the second quarter 2010, an increase of $0.1 million from year-end 2009. The increase in other assets in the first half of 2010 as a result of the fair value of intangible assets acquired with Academy was largely offset by the amortization of the existing and acquired intangibles, a reduction in the insurance recoverable account and other factors.
 
Other liabilities and accrued items totaled $46.0 million at the end of the second quarter 2010, an increase of $1.9 million since the end of 2009. The increase was primarily due to growth in the incentive compensation accrual as a result of the 2010 performance offset in part by a decline in the fair value of derivative financial instruments. Other accruals, including accruals for utilities and insurance, declined by more minor amounts as well.
 
Unearned revenue, which is a liability representing products invoiced to customers but not shipped, was $0.4 million as of July 2, 2010, unchanged from December 31, 2009. Revenue and the associated margin will be recognized for these transactions when the goods ship, title passes and all other revenue recognition criteria are met. Invoicing in advance of the shipment, which is only done in certain circumstances, allows us to collect cash sooner than we would otherwise.
 
Other long-term liabilities were $9.5 million as of the end of the second quarter 2010 and $9.6 million as of year-end 2009. This small decline was primarily due to a net reduction in the legal reserves in the first half of 2010.
 
The retirement and post-employment benefit balance totaled $78.6 million at the end of the second quarter 2010, a decline of $3.7 million from the balance at December 31, 2009. This balance represents the liability under our domestic defined benefit pension plan, the retiree medical plan and other retirement plans and post-employment obligations.
 
The liability for the domestic pension plan declined a net $2.8 million in the first six months of 2010 as a result of the contributions to the plan of $4.5 million and an adjustment to other comprehensive income, a component of shareholders’ equity, of $1.2 million offset in part by an expense of $2.9 million. The retiree medical plan liability declined $0.3 million as payments under the plan exceeded the expense in the first half of 2010.
 
Unearned income increased from $39.7 million as of December 31, 2009 to $54.6 million as of July 2, 2010. As previously noted, this liability represents payments received from the government for the design and construction of the new beryllium production facility. The liability will be relieved to income ratably with depreciation over the life of the facility once it is built and placed into service.
 
Debt totaled $120.5 million at the end of the second quarter 2010, an increase of $56.0 million from the total debt of $64.5 million at the end of 2009. The increase in debt resulted primarily from funding the acquisition of Academy, the growth in receivables and inventory and capital expenditures. The majority of the debt increase was through increased borrowings under the existing revolving line of credit and was classified as long-term on the consolidated balance sheet.
 
Short-term debt, which included domestic and foreign currency denominated loans, was $42.2 million as of the end of the second quarter 2010. Long-term debt was $78.3 million as of the end of the second quarter 2010, none of which was currently payable. We were in compliance with all of our debt covenants as of the end of the second quarter 2010.
 
Shareholders’ equity of $363.0 million at the end of the second quarter 2010 was $23.1 million higher than the balance of $339.9 million as of year-end 2009. The increase was primarily due to the comprehensive income of $20.3 million (see Note E to the Consolidated Financial Statements).
 
We received $0.9 million for the exercise of approximately 47,000 shares in the first half of 2010.
 
Equity was also affected by stock compensation expense and other factors.


24


 

Prior Year Financial Position
 
Net cash from operating activities was $11.7 million in the first half of 2009 as the effects of depreciation and a net reduction in working capital items more than offset the net loss. Receivables declined $13.8 million, or 16%, during the first half of 2009 as a result of the lower sales volume and an improvement in the average collection period. Inventories were $23.8 million, or 15%, lower at the end of the second quarter 2009 than year-end 2008 as a result of the markedly lower levels of business. The inventory turnover ratio was unchanged. The majority of the decline in inventory levels was in Specialty Engineered Alloys. Other liabilities and accrued items declined $14.4 million in the first quarter 2009 largely as a result of the payment of the 2008 incentive compensation to employees and to a lesser degree the change in the fair value of outstanding derivative contracts.
 
Total debt stood at $38.4 million at the end of the second quarter 2009, a decrease of $3.4 million from year-end 2008. The reduction resulted from the strong cash flow from operations in the second quarter 2009 coupled with the limited capital expenditures. Cash on hand of $21.0 million at the end of the second quarter was $2.5 million higher than the year-end 2008 balance.
 
Off-Balance Sheet Arrangements and Contractual Obligations
 
We maintain the majority of our precious metals that we use in production on a consignment basis in order to reduce our exposure to metal price movements and to reduce our working capital investment. The balance outstanding under the off-balance sheet precious metal consigned inventory arrangements totaled $165.3 million at the end of the second quarter 2010, an increase of $66.6 million from year-end 2009 as a result of an increase in the quantities on hand in order to support the current business levels, the addition of Academy in 2010 and higher metal prices.
 
While our borrowings under existing lines of credit have increased during the first half of 2010, we have not entered into any new material contractual obligations, long-term debt agreements or operating leases as of July 2, 2010 from what was disclosed on page 41 of our Annual Report on Form 10-K for the year ended December 31, 2009.
 
We were in compliance with the covenants in our off-balance sheet arrangements as of July 2, 2010.
 
Liquidity
 
We believe funds from operations plus the available borrowing capacity and the current cash balance are adequate to support operating requirements, capital expenditures, projected pension plan contributions, strategic acquisitions, environmental remediation projects and any repurchases of our common stock.
 
The debt-to-debt-plus-capital ratio increased to 24.9% as of the end of the second quarter from 15.9% as of the end of 2009 as a result of using debt to fund the Academy acquisition and the increase in working capital. Typically, as business levels expand, the working capital investment increases. As growth rates slow down, our working capital levels will tend to normalize and we should generate cash flow from operations that will enable us to reduce debt.
 
While our debt levels have increased in 2010, the available debt capacity under existing credit lines was $135.6 million as of the end of the second quarter 2010, an increase of $89.3 million since year-end 2009. A covenant in our revolving credit agreement limits our total debt capacity to a function of the rolling twelve month earnings before interest, taxes, depreciation and amortization and certain other adjustments. In general, as our earnings improve, so does our debt capacity. There are no mandatory long-term debt repayments to be made within the next twelve months.
 
The cash balance of $16.1 million as of the end of the second quarter 2010 was $3.8 million higher than year-end 2009.
 
Our precious metal operations rely upon off-balance sheet arrangements in order to finance working capital requirements and to efficiently reduce our metal price exposure. The increase in metal prices and the expansion of our business levels in the first half of 2010 has put pressure on the available capacity under the existing metal lines. Capacity under various lines has recently been increased. As of July 2, 2010, the available and unused capacity under the metal financing lines totaled approximately $43.9 million. The bulk of these metal arrangements mature


25


 

at the end of September 2010 and we are in negotiations with the metal providers to extend the maturity dates, increase the capacity and potentially amend other terms of the current agreements. None of our metal providers have indicated an unwillingness to give us the necessary extensions (with our largest metal provider currently considering a multi-year extension); however, there can be no assurance that we will reach definitive agreements to extend the maturity dates, increase the capacity or amend any other terms of our metal arrangements on commercially acceptable terms at all. Should capacity under the off-balance sheet lines become constrained, we would purchase our metal requirements financed by traditional debt to the extent we have available capacity under those existing lines.
 
In July 2010, our Board of Directors authorized the Company to repurchase up to 700,000 shares, or approximately 3% of our outstanding shares of common stock. The primary purpose of the repurchase program is to offset the dilution created through shares issued under our stock-based compensation plans. Any stock repurchases will be made from time to time for cash in the open market or otherwise, including without limitation, in privately negotiated transactions and round lot or block transactions on the New York Stock Exchange or pursuant to accelerated share repurchases or Rule 10b5-1 plans. The repurchase program may be suspended or discontinued at any time.
 
Critical Accounting Policies
 
For additional information regarding critical accounting policies, please refer to pages 43 to 46 of our Annual Report on Form 10-K for the year ended December 31, 2009. There have been no material changes in our critical accounting policies since the inclusion of this discussion in our Annual Report on Form 10-K.
 
Market Risk Disclosures
 
For information regarding market risks, please refer to pages 47 to 48 of our Annual Report on Form 10-K for the year ended December 31, 2009. There have been no material changes in our market risks since the inclusion of this discussion in our Annual Report on Form 10-K.
 
Outlook
 
Our sales order entry rate exceeded our record sales level in the first half of 2010. The strong order entry rate continued into the early portion of the third quarter 2010. While consumer electronic applications were a main driver behind the strong order pattern, we saw improved demand from many of our key markets in the second quarter. Our two recent acquisitions have also expanded our market reach and our new product development activities continue to enhance our long-term growth opportunities.
 
Visibility into projected business levels remains difficult given the current state of the global economy. It can also be difficult to project the timing and amounts of potential defense applications, given government budget issues and other factors. Sales in the third quarter of a given year are often adversely affected by a seasonal slow down in our European markets and the U.S. automotive market due to the model year change over. However, sales in the third quarter can benefit from the increased production schedules by manufacturers of consumer electronic products in preparation for the year-end holiday season.
 
In 2009, we made reductions to our cost structure due to the significant fall-off in sales at that time. We have added back some resources in order to meet the current high production requirements, but the resources have not been added back proportionately with the growth in sales. Excluding the impact of Barr and Academy, employment was still down 9% as of the end of the second quarter 2010 from year-end 2008, despite the current improved business levels and outlook. We have reversed the wage reductions that were implemented in 2009 due to our improved actual and projected profitability. Additional spending requirements may arise in the second half of 2010 as we face the challenges of a growing business with increasing complexity.
 
The new beryllium facility is scheduled to be completed and we expect product testing and qualification to occur in the second half of this year. Those qualification and testing efforts could increase our costs and reduce profits in those periods. However, once operational, this facility will provide a long-term source of high-quality beryllium metal.


26


 

Forward-Looking Statements
 
Portions of the narrative set forth in this document that are not statements of historical or current facts are forward-looking statements. Our actual future performance may materially differ from that contemplated by the forward-looking statements as a result of a variety of factors. These factors include, in addition to those mentioned elsewhere herein:
 
  •  The global economy;
 
  •  The condition of the markets which we serve, whether defined geographically or by segment, with the major market segments being telecommunications and computer, aerospace and defense, medical, industrial components, data storage, automotive electronics and appliance;
 
  •  Changes in product mix and the financial condition of customers;
 
  •  Actual sales, operating rates and margins for 2010;
 
  •  Our success in developing and introducing new products and new product ramp-up rates;
 
  •  Our success in passing through the costs of raw materials to customers or otherwise mitigating fluctuating prices for those materials, including the impact of fluctuating prices on inventory values;
 
  •  Our success in integrating newly acquired businesses, including the acquisitions of Barr and Academy;
 
  •  The impact of the results of Barr and Academy on our ability to achieve fully the strategic and financial objectives related to these acquisitions, including the acquisitions being accretive to earnings in 2010;
 
  •  Our success in implementing our strategic plans and the timely and successful completion and start-up of any capital projects, including the new primary beryllium facility being constructed in Elmore, Ohio;
 
  •  The availability of adequate lines of credit and the associated interest rates;
 
  •  Other financial factors, including cost and availability of raw materials (both base and precious metals), metal financing fees, tax rates, exchange rates, pension costs and required cash contributions and other employee benefit costs, energy costs, regulatory compliance costs, the cost and availability of insurance and the impact of the Company’s stock price on the cost of incentive compensation plans;
 
  •  The uncertainties related to the impact of war and terrorist activities;
 
  •  Changes in government regulatory requirements and the enactment of new legislation that impacts our obligations and operations;
 
  •  The conclusion of pending litigation matters in accordance with our expectation that there will be no material adverse effects;
 
  •  The amount and timing of repurchases of the Company’s common stock, if any, and,
 
  •  The risk factors set forth in Part 1, Item 1A of our Annual Report on Form 10-K for the year ended December 31, 2009.
 
Item 3.   Quantitative and Qualitative Disclosures about Market Risk
 
For information about our market risks, please refer to our annual report on Form 10-K to shareholders for the period ended December 31, 2010.
 
Item 4.   Controls and Procedures
 
We carried out an evaluation under the supervision and with participation of management, including the Chief Executive Officer and Chief Financial Officer, of the effectiveness of the design and operation of our disclosure controls and procedures as of July 2, 2010 pursuant to Rule 13a-15(b) under the Securities Exchange Act of 1934, as amended. Based upon that evaluation, our management, including the Chief Executive Officer and Chief Financial Officer, concluded that our disclosure controls and procedures were effective as of the evaluation date.


27


 

In the second quarter 2010, the Company implemented SAP (an information technology system for accounting, sales and manufacturing) at one of its domestic facilities. SAP was implemented in part to improve internal control over financial reporting at this facility. This change in systems was subject to thorough testing and review by internal and external parties both before and after final implementation. SAP had previously been implemented at a significant number of the Company’s other facilities. The Company continually strives to improve its internal control over financial reporting to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with GAAP.
 
Except as set forth above, there have been no changes in our internal controls over financial reporting identified in connection with the evaluation required by Rule 13a-15 under the Securities Exchange Act of 1934, as amended, that occurred during the quarter ended July 2, 2010 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.


28


 

PART II OTHER INFORMATION
 
Item 1.   Legal Proceedings
 
Our subsidiaries and our holding company are subject, from time to time, to a variety of civil and administrative proceedings arising out of our normal operations, including, without limitation, product liability claims, health, safety and environmental claims and employment-related actions. Among such proceedings are the cases described below.
 
Beryllium Claims
 
As of July 2, 2010, our subsidiary, Brush Wellman Inc., was a defendant in two proceedings in state and federal courts brought by plaintiffs alleging that they have contracted, or have been placed at risk of contracting, beryllium sensitization or chronic beryllium disease or other lung conditions as a result of exposure to beryllium. Plaintiffs in beryllium cases seek recovery under negligence and various other legal theories and seek compensatory and punitive damages, in many cases of an unspecified sum. Spouses of some plaintiffs claim loss of consortium.
 
During the second quarter of 2010, the number of beryllium cases decreased from four cases (involving eight plaintiffs) as of April 2, 2010, to two cases (involving six plaintiffs) as of July 2, 2010. Two cases (involving two plaintiffs) were settled and dismissed during the quarter. The earlier dismissal of one case, a purported class action, as discussed more fully below, was affirmed by the court of appeals. One case (involving one plaintiff) was filed during the quarter.
 
The two pending beryllium cases as of July 2, 2010 involve four plaintiffs, plus two spouses with consortium claims. The Company has some insurance coverage, subject to an annual deductible.
 
The purported class action was Gary Anthony v. Small Tube Manufacturing Corporation d/b/a Small Tube Products Corporation, Inc., et al., filed in the Court of Common Pleas of Philadelphia County, Pennsylvania, case number 000525, on September 7, 2006. The case was removed to the U.S. District Court for the Eastern District of Pennsylvania, case number 06-CV-4419, on October 4, 2006. The only named plaintiff was Gary Anthony. The defendants were Small Tube Manufacturing Corporation, d/b/a Small Tube Products Corporation, Inc.; Admiral Metals Inc.; Tube Methods, Inc.; and Cabot Corporation. The plaintiff purported to sue on behalf of a class of current and former employees of the U.S. Gauge facility in Sellersville, Pennsylvania who had ever been exposed to beryllium for a period of at least one month while employed at U.S. Gauge. The plaintiff brought claims for negligence. Plaintiff sought the establishment of a medical monitoring trust fund, cost of publication of approved guidelines and procedures for medical monitoring of the class, attorneys’ fees and expenses. Defendant Tube Methods, Inc. filed a third-party complaint against Brush Wellman Inc. in that action on November 15, 2006. Tube Methods alleged that Brush supplied beryllium-containing products to U.S. Gauge, and that Tube Methods worked on those products, but that Brush was liable to Tube Methods for indemnification and contribution. Brush moved to dismiss the Tube Methods complaint on December 22, 2006. On January 12, 2007, Tube Methods filed an amended third-party complaint, which Brush moved to dismiss on January 26, 2007; however, the court denied the motion on September 28, 2007. Brush filed its answer to the amended third-party complaint on October 19, 2007. On February 29, 2008, Brush filed a motion for summary judgment based on plaintiff’s lack of any substantially increased risk of CBD. On September 30, 2008, the court granted the motion for summary judgment in favor of all of the defendants and dismissed plaintiff’s class action complaint. On October 29, 2008, plaintiff filed a notice of appeal. The Court of Appeals granted a motion to stay the appeal due to the bankruptcy of one of the appellees, Millennium Petrochemicals. On April 3, 2009, Small Tube Manufacturing filed a motion for relief in bankruptcy court from the automatic stay, asking that the bankruptcy court modify the stay to allow Small Tube Manufacturing’s indemnification claim against Millennium Petrochemicals and the Anthony case to proceed to final judgment, including all appeals. On May 14, 2009, the bankruptcy court approved a stipulation and order modifying the automatic stay to permit Millennium Petrochemicals and Small Tube Manufacturing to participate in the appeal. On May 27, 2009, Small Tube Manufacturing filed an unopposed motion with the Court of Appeals to lift the stay, which the court granted on June 22, 2009. On July 29, 2009, the Company and the other appellees filed their brief in the Court of Appeals. The Court heard oral argument on January 11, 2010. On June 7, 2010, the Court affirmed the trial court’s ruling.


29


 

Item 4.   Reserved
 
Item 5.   Other Information
 
Item 6.   Exhibits
 
         
  4 .1   Third Amendment to the Credit Agreement dated May 7, 2010, among Brush Engineered Materials Inc. and other borrowers and JPMorgan Chase Bank N.A., acting for itself and as agent for certain other banking institutions as lenders (filed as Exhibit 99.1 to the Company’s Form 8-K (File No. 1-15885) filed on May 12, 2010), incorporated herein by reference.
  10 .1   Fifth Amendment to the Second Amended and Restated Precious Metals Agreement dated April 30, 2010, among Brush Engineered Materials Inc. and other borrowers and The Bank of Nova Scotia.
  10 .2   Sixth Amendment to the Second Amended and Restated Precious Metals Agreement dated June 9, 2010, among Brush Engineered Materials Inc. and other borrowers and The Bank of Nova Scotia, (filed as Exhibit 99.1 to the Company’s Form 8-K (File No. 1-15885) filed on June 9, 2010), incorporated herein by reference.
  10 .3   Amendment No. 2 to the Consignment Agreement dated June 11, 2010 between Brush Engineered Materials Inc. and Canadian Imperial Bank of Commerce and CIBC World Markets Inc., (filed as Exhibit 99.1 to the Company’s Form 8-K (File No. 1-15885) filed on June 14, 2010), incorporated herein by reference.
  11     Statement regarding computation of per share earnings
  31 .1   Certification of Chief Executive Officer required by Rule 13a-14(a) or 15d-14(a)
  31 .2   Certification of Chief Financial Officer required by Rule 13a-14(a) or 15d-14(a)
  32     Certification Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002


30


 

SIGNATURES
 
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.
 
BRUSH ENGINEERED MATERIALS INC.
 
/s/  John D. Grampa
John D. Grampa
Senior Vice President Finance and
Chief Financial Officer
 
Dated: August 9, 2010


31