Table of Contents

 

 

 

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549


FORM 10-K

(Mark One)

 

x

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2016

 

OR

o

TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

Commission file number 0-16244


VEECO INSTRUMENTS INC.

(Exact Name of Registrant as Specified in Its Charter)

Delaware
(State or Other Jurisdiction of Incorporation or Organization)

 

11-2989601
(I.R.S. Employer Identification No.)

 

 

 

Terminal Drive
Plainview, New York

(Address of Principal Executive Offices)

 

11803
(Zip Code)

 

Registrant’s telephone number, including area code:

(516) 677-0200

 

Securities registered pursuant to Section 12(b) of the Act:

 

(Title of each class)
Common Stock, par value $0.01 per share

 

(Name of each exchange on which registered)
The NASDAQ Stock Market

 

Securities registered pursuant to Section 12(g) of the Act:

None

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  Yes x  No o

 

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.  Yes o  No x

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x  No   o

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes x  No   o

 

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of Registrant’s knowledge, in definitive proxy or information statements incorporated by references in Part III of this Form 10-K or any amendment to this Form 10-K. x

 

Indicate by check mark whether the Registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer o

Accelerated filer x

 

 

Non-accelerated filer o  (Do not check if a smaller reporting company)

Smaller reporting company o

 

Indicate by check mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the Act). o Yes x No

 

The aggregate market value of the common stock held by non-affiliates of the registrant at July 1, 2016 (the last business day of the registrant’s most recently completed second quarter) was $655,733,038 based on the closing price of $16.38 on the NASDAQ Stock Market on that date.

 

The number of shares of each of the registrant’s classes of common stock outstanding on February 14, 2017 was 40,595,406 shares of common stock, par value $0.01 per share.

 

DOCUMENTS INCORPORATED BY REFERENCE

 

Certain portions of the definitive Proxy Statement to be used in connection with the Registrant’s 2017 Annual Meeting of Stockholders are incorporated by reference into Part III of this Form 10-K.

 

 

 

 


 


Table of Contents

 

VEECO INSTRUMENTS INC.

 

INDEX

 

 

PART I

3

 

 

Item 1. Business

3

 

 

Item 1A. Risk Factors

9

 

 

Item 1B. Unresolved Staff Comments

24

 

 

Item 2. Properties

24

 

 

Item 3. Legal Proceedings

24

 

 

Item 4. Mine Safety Disclosures

24

 

 

PART II

25

 

 

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

25

 

 

Stock Performance Graph

26

 

 

Item 6. Selected Financial Data

27

 

 

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

27

 

 

Item 7A. Quantitative and Qualitative Disclosures about Market Risk

40

 

 

Item 8. Financial Statements and Supplementary Data

40

 

 

Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

40

 

 

Item 9A. Controls and Procedures

40

 

 

Item 9B. Other Information

43

 

 

PART III

43

 

 

Item 10. Directors, Executive Officers and Corporate Governance

43

 

 

Item 11. Executive Compensation

43

 

 

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

43

 

 

Item 13. Certain Relationships and Related Transactions, and Director Independence

43

 

 

Item 14. Principal Accounting Fees and Services

43

 

 

PART IV

44

 

 

Item 15. Exhibits, Financial Statement Schedules

44

 

 

SIGNATURES

47

 

2



Table of Contents

 

This Annual Report on Form 10-K (“Form 10-K”) contains certain forward-looking information relating to Veeco Instruments Inc. (together with its consolidated subsidiaries, “Veeco,” the “Company,” “Registrant,” “we,” “our,” or “us,” unless the context indicates otherwise) that is based on the beliefs of, and assumptions made by, our management as well as information currently available to management. When used in this Form 10-K, the words “believes,” “anticipates,” “expects,” “estimates,” “targets,” “plans,” “intends,” “will,” and similar expressions relating to the future are intended to identify forward-looking information. Discussions containing such forward-looking statements may be found in Part I. Items 1, 3, 7 and 7A hereof, as well as within this Form 10-K generally. This forward-looking information reflects our current views with respect to future events and is subject to certain risks, uncertainties, and assumptions, including with respect to our pending acquisition of Ultratech, some of which are described under the caption “Risk Factors” in Part I, Item 1A, and elsewhere in this Form 10-K. Should one or more of these risks or uncertainties occur, or should our assumptions prove incorrect, actual results may vary materially from the forward-looking information described in this Form 10-K as believed, anticipated, expected, estimated, targeted, planned, or similarly identified. We do not undertake any obligation to update any forward-looking statements to reflect future events or circumstances after the date of such statements.

 

PART I

 

Item 1. Business

 

We create process equipment that enables technologies for a cleaner and more productive world. We design, develop, manufacture, market, and support thin film equipment to meet the demands of key global trends such as improving energy efficiency, enhancing mobility, and increasing connectivity. Our equipment is used to make electronic devices which enable these trends, including light emitting diodes (“LEDs”), micro-electromechanical systems (“MEMS”), wireless devices, power electronics, hard disk drives (“HDDs”), and semiconductor devices. Our products are sold to semiconductor and advanced packaging device manufacturers, and we may also license our technology to our customers or partners.

 

We develop highly differentiated, “best-in-class” equipment for critical performance steps in thin film processing. Our products provide leading technology at low cost-of-ownership. Core competencies in advanced thin film technologies and decades of specialized process know-how help us stay at the forefront of these rapidly advancing industries.

 

Headquartered in Plainview, New York, we were organized as a Delaware corporation in 1989. We have sales and service operations across the Asia-Pacific region, Europe, and North America to address our customers’ needs.

 

Recent Developments

 

On February 2, 2017, Veeco and Ultratech, Inc. (“Ultratech”), a leading supplier of lithography, laser-processing, and inspection systems used to manufacture semiconductor devices and LEDs, signed a definitive agreement for Veeco to acquire Ultratech. The Boards of Directors of both Veeco and Ultratech have unanimously approved the transaction.

 

Ultratech shareholders will receive (i) $21.75 per share in cash and (ii) 0.2675 of a share of Veeco common stock for each Ultratech common share outstanding. Based on Veeco’s closing stock price on February 1, 2017, the transaction consideration is valued at approximately $28.64 per Ultratech share. The implied total transaction value is approximately $815 million and the implied enterprise value is approximately $550 million, net of Ultratech’s net cash balance as of December 31, 2016. The transaction is expected to close in the second calendar quarter of 2017, subject to approval by Ultratech shareholders, regulatory approvals in the United States, and other customary closing conditions.

 

Business Overview

 

We are focused on:

 

·          Providing differentiated process equipment to address customers’ current production requirements and next generation product development roadmaps;

 

·          Investing to win through focused research and development in markets that we believe provide significant growth opportunities or are at an inflection point in process equipment requirements, including LED, power semiconductor devices, and advanced packaging technologies;

 

3



Table of Contents

 

·         Leveraging our sales channel and local process applications support teams to build strong strategic relationships with technology leaders;

 

·         Expanding our portfolio to improve the performance of our systems, including spare parts, upgrades, and consumables to drive growth, reduce our customers’ cost of ownership, and improve customer satisfaction;

 

·         Cross-selling our product portfolio across our broad customer base and end markets to both maximize sales opportunities and diversify our business;

 

·         Utilizing a combination of outsourced and internal manufacturing strategies to flex manufacturing capacity through industry investment cycles without compromising quality or performance; and

 

·         Pursuing partnerships and acquisitions to expand our product portfolio into new and adjacent markets to drive sales growth.

 

Markets

 

Our systems are used in the creation of a broad range of microelectronic components, including LEDs, MEMS, radio frequency (“RF”) filters, power semiconductors, thin film magnetic heads (“TFMHs”), and other semiconductor devices. Our customers who manufacture these devices invest in our systems to develop next generation products and deliver more efficient, cost effective, and advanced technological solutions. We operate in a cyclical business environment, and our customers’ buying patterns are dependent upon industry trends. Our products are sold into multiple markets, and the following discussion focuses on the trends that most influence our business within each of those markets.

 

Lighting, Display & Power Electronics

 

LED technology has existed for more than 50 years; however, commercial adoption of LEDs was limited to niche applications until the most recent decade. In the early 1990’s, researchers developed a process utilizing Gallium Nitride (“GaN”) that created a low cost blue LED to produce white light. With that breakthrough, the LED industry started, and the number of applications for LEDs began to expand.

 

Since that time, the LED industry has experienced multiple growth cycles brought on by the adoption of LED technology for consumer and commercial applications. The first wave of LED growth was driven by mobile phones, which implemented the use of LED technology for display backlighting. The LED industry experienced its second period of rapid growth as LEDs were adopted for TV display backlighting. More recently, the adoption of LEDs for solid state lighting has given rise to a third wave of demand. LED technology offers energy and cost savings opportunities in lighting, which align with the global shift toward energy efficiency initiatives.

 

Our metal organic chemical vapor deposition (“MOCVD”) technology is at the core of the manufacturing process for GaN-based LEDs. We have benefited with each growth cycle, as LED producers invest in MOCVD process equipment to capture share in these markets. Demand for our equipment has historically been cyclical in nature, influenced by multiple factors, including: macroeconomic conditions; prices for LED chips; supply and demand dynamics; and our customers’ manufacturing plans. However, we expect the ongoing adoption of LED lighting to drive the need for additional MOCVD capacity over the next several years.

 

MOCVD technology is equally important in the manufacturing of red, orange, and yellow (“ROY”) LEDs, which are used increasingly for fine-pitch digital signage and automotive lighting applications. For these applications, our MOCVD technology is used to deposit highly uniform Arsenic Phosphide (“AsP”) films which create amber and red hues. AsP MOCVD technology is also used to produce multiple other devices including infrared LEDs and vertical-cavity surface-emitting lasers (“VCSELS”) used for optical data communication. While the market opportunity for AsP MOCVD technology is smaller than the GaN MOCVD market for blue LEDs, we expect to also benefit from growth driven by increased adoption of LED technology for automobiles, outdoor display, signage, and other applications.

 

Our MOCVD technologies are also crucial in the manufacturing of GaN-on-Silicon based power electronic devices. Global demand is increasing for advanced power electronics with greater energy efficiency, smaller footprints, higher operating temperatures, faster switching capabilities, and greater reliability. These devices support many needs, including

 

4



Table of Contents

 

more efficient IT servers, electrical motors, electric vehicles, wind turbines, and photovoltaic power inverters.

 

While silicon-based transistors are widely used in power electronic devices today, GaN-on-Silicon based power electronics developed on MOCVD tools can potentially deliver higher performance (e.g., smaller power supply form factors, higher efficiency, and faster switching speeds). In recent years, global industry leaders in power electronics have focused on research and development (“R&D”) programs to commercialize this new technology. Device manufacturers will likely begin to transition from development to production of these devices over the next couple of years; we can benefit from this transition as our customers invest in process equipment to support this production ramp-up.

 

In addition to depositing the critical GaN layer with our MOCVD products, our Precision Surface Processing (“PSP”) products address multiple etch and clean steps required to manufacture these advanced power electronics and LED devices.

 

Advanced Packaging, MEMS & RF

 

Advanced Packaging includes a portfolio of wafer-level assembly technologies that enable the miniaturization and performance improvement of electronic products, such as smartphones, smartwatches, and other mobile applications. As process steps such as wet etch and cleans in Advanced Packaging have become increasingly more challenging, our PSP products have been gaining traction in this growing market segment. Demand for higher performance, increased functionality, smaller form factors, and lower power consumption in mobile devices, consumer electronics, and high performance computing is driving the adoption of advanced packaging technology. Independent Device Manufacturers (“IDMs”) and Outsourced Semiconductor Assembly and Test (“OSAT”) companies are implementing multiple advanced packaging approaches including Fan-Out Wafer Level Packaging (“FO-WLP”), recently deployed in high-volume manufacturing and Through Silicon Via (“TSV”) to enable stacked memory, 2.5D, and 3D packaging devices.

 

MEMS devices are used for an increasing number of applications, including accelerometers for automobile airbags, pressure sensors for medical uses, and gyroscopes for a variety of consumer products, such as gaming consoles and mobile devices. One of the fastest growing MEMS applications has been RF filters for mobile devices, driven by increasingly complex wireless standards, the exponential growth of mobile data, and carrier aggregation. In order to address these growing demands, the number of discrete RF filters in an average smartphone is expected to double from 50 to 100 by 2020. These trends are positive for us, particularly for our PSP products, where our technology is enabling some of the most challenging process steps, as well as our ion beam etch and Molecular Beam Epitaxy (“MBE”) products, which are used to create Bulk Acoustic Wave (“BAW”) and Surface Acoustic Wave (“SAW”) RF filters.

 

Data Storage

 

The Data Storage market involves the storage of data in electromagnetic or other forms for use by a computer or other devices, including HDDs used in large capacity storage applications. While HDDs face significant competition from flash memory, we believe that HDDs will continue to provide significant value for mass storage and will remain at the forefront of large capacity storage applications. This is especially true for data center applications where large volumes of data storage are required to serve an increasingly mobile population. The HDD manufacturing industry continues to optimize its existing manufacturing capacity to address demand. As a result, we expect future sales to be focused on implementation of new technologies as opposed to capacity expansion. Future demand for our data storage systems is unclear and sales are expected to fluctuate from quarter to quarter. Our process knowledge and magnetic materials expertise from the Data Storage market positions us well for certain front-end semiconductor and MEMS opportunities, as thin film magnetic manufacturing methods become increasingly used in these markets.

 

Scientific & Industrial

 

The Scientific and Industrial markets include advanced materials research and a broad range of manufacturing applications including high-power fiber lasers, infrared detectors, optical coatings, and extreme ultraviolet (“EUV”) photomasks blanks.

 

Our MBE systems are used by scientific research organizations and universities to drive new discoveries in the areas of materials science. MBE enables precise epitaxial crystal growth for a wide variety of materials, which supports the

 

5



Table of Contents

 

development of new performance materials used for emerging technologies. MBE technology is also used in the manufacturing of products such as high-power lasers and infrared sensors. Our tools create highly uniform Gallium-Arsenide (“GaAs”) or Indium-Phosphide (“InPh”) film layers, which are critical to the performance of these devices. Our PSP products are also used to manufacture infrared sensors.

 

Our Ion Beam Deposition (“IBD”) tools are used to produce high quality optical films for multiple applications including laser mirrors, optical filters, and anti-reflective coatings. Our tools deposit thin layers of advanced materials on various substrates to alter how light is reflected and transmitted. Our ability to precisely deposit high quality films with extremely low particulate levels make our ion beam deposition technology ideal for manufacturing defect-free EUV photomask blanks. The front-end semiconductor industry is expected to adopt EUV lithography to meet future device requirements. Future growth will depend on overall adoption of EUV technology.

 

System products

 

Metal Organic Chemical Vapor Deposition Systems

 

We are the world’s leading supplier of MOCVD systems. MOCVD production systems are used to make GaN-based devices (such as blue and green LEDs) and AsP-based devices (such as ROY LEDs), which are used in television and computer display backlighting, general illumination, large area signage, specialty illumination, power electronics, and many other applications. Our TurboDisc® EPIK®700 GaN MOCVD system combines the industry’s highest productivity and best-in-class yields with low cost of ownership, further enabling lower manufacturing costs for LED applications. In 2016, we introduced the TurboDisc K475i AsP MOCVD system, which offers best-in-class productivity and yields for ROY LEDs, infra-red LEDs, and high-efficiency triple junction photovoltaic solar cell applications. Our Propel PowerGaN MOCVD System (“Propel”) enables the development of highly-efficient GaN-based power electronic devices that have the potential to accelerate the industry’s transition from research and development to high volume production. The Propel system offers 200mm technology and incorporates single-wafer reactor technology for outstanding film uniformity, yield, and device performance.

 

Precision Surface Processing Systems

 

Our Precision Surface Processing systems offer single wafer wet etch, clean, and surface preparation solutions which target high growth segments in advanced packaging, MEMS, LEDs, and compound semiconductor markets. The WaferStorm® platform is based on PSP’s unique ImmJET technology, which provides improved performance at a lower cost of ownership than conventional wet bench-only or spray-only approaches. This highly flexible platform targets solvent based cleaning applications that require a significant level of process control and flexibility. The WaferEtch® platform provides highly uniform, selective etching with onboard end point detection for improved process control and yield in bumping applications. In addition, PSP has developed a state-of-the-art solution with the WaferEtch platform to address the requirements of TSV reveal, in which the backside of a wafer is thinned to reveal the copper interconnects. PSP’s TSV technology offers a significant cost of ownership reduction compared with dry etch processing by replacing up to four separate process steps.

 

Ion Beam Etch and Deposition Systems

 

Our NEXUS® IBD systems utilize ion beam technology to deposit precise layers of thin films. IBD systems deposit high purity thin film layers and provide excellent uniformity and repeatability. Our NEXUS Ion Beam Etch (“IBE”) systems utilize a charged particle beam consisting of ions to etch precise, complex features. The NEXUS systems may be included on our cluster system platform to allow either parallel or sequential deposition/etch processes. These systems are used primarily by data storage and telecommunications device manufacturers in the fabrication of discrete and integrated microelectronic devices.

 

We also provide a broad array of ion beam sources. These technologies are applicable in the HDD industry as well as for optical coatings and other end markets. Our SPECTOR® Ion Beam Sputtering system was developed for high precision coatings and offers manufacturers state of the art optical thickness monitoring, improved productivity, and target material utilization, for cutting-edge optical interference coating applications.

 

6



Table of Contents

 

Molecular Beam Epitaxy Systems

 

MBE is the process of precisely depositing epitaxially-aligned atomically-thin crystalline layers, or epilayers, of elemental materials onto a substrate in an ultra-high vacuum environment. We are the leading supplier of MBE systems worldwide. Our MBE systems, sources, and components are used to develop and manufacture critical epitaxial layers in a wide variety of applications such as solar cells, high-power fiber lasers, infrared detectors, mobile phones, radar systems, and displays. For many compound semiconductors, MBE is the critical step of the fabrication process, ultimately determining device functionality and performance. We provide MBE systems and components for the production of wireless devices (e.g., power amplifiers, high electron mobility transistors, or hetero-junction bipolar transistors) and a broad array of research applications for new compound semiconductor materials. Our GENxplor® R&D MBE System is the industry’s first fully-integrated MBE system for the compound semiconductor research and development market. The GENxplor MBE system creates high quality epitaxial layers on substrates up to 3” in diameter and is ideal for cutting-edge research on a wide variety of materials including gallium arsenide, nitrides, and oxides. Our GEN2000® and GEN200® production MBE systems continue to set standards for volume production of MBE-based compound semiconductor devices.

 

Other Deposition and Industrial Products

 

We make a broad array of deposition systems including Physical Vapor Deposition, Diamond-Like Carbon Deposition, and Chemical Vapor Deposition Systems. In addition, our Optium® products generally are used in “back-end” applications in data storage fabrication facilities where TFMHs or “sliders” are fabricated. This equipment includes lapping tools, which enable precise material removal within three nanometers, which is necessary for advanced TFMHs. We also manufacture tools that slice and dice wafers into row bars and TFMHs.

 

Sales and Service

 

We sell our products and services worldwide primarily through various strategically located facilities in the United States, Europe, and the Asia-Pacific region. We believe that our customer service organization is a significant factor in our success. We provide service and support on a warranty, service contract, and an individual service-call basis. We believe that offering timely support creates stronger relationships with customers and provides us with a significant competitive advantage. Revenue from the sales of parts, upgrades, service, and support represented approximately 28%, 22%, and 25% of our net sales for the years ended December 31, 2016, 2015, and 2014, respectively. Parts and upgrade sales represented approximately 21%, 18%, and 21% of our net sales for those years, respectively, and service and support sales were 6%, 4%, and 4% respectively.

 

Customers

 

We sell our products to many of the world’s LED, MEMS, OSAT, HDD and semiconductor manufacturers, as well as research centers and universities. We rely on certain principal customers for a significant portion of our sales. Sales to OSRAM Opto Semiconductors accounted for more than 10% of our total net sales for 2016; sales to San’an Optoelectronics Co. and KAISTAR Lighting (Xiamen) Co. each accounted for more than 10% of our total net sales in 2015; sales to HC SemiTek Corp. and Seoul Viosys Co. each accounted for more than 10% of our total net sales in 2014. If any principal customer discontinues its relationship with us or suffers economic difficulties, our business prospects, financial condition, and operating results could be materially and adversely affected.

 

Research and Development

 

Our research and development functions are focused on the timely creation of new products and enhancements to existing products, both of which are necessary to maintain our competitive position. We collaborate with our customers to align our technology and product roadmaps to customer requirements. Our research and development activities take place at our facilities in St. Paul, Minnesota; Somerset, New Jersey; Plainview, New York; and Horsham, Pennsylvania.

 

Our research and development expenses were approximately $81.0 million, $78.5 million, and $81.2 million, or approximately 24%, 16%, and 21% of net sales for the years ended December 31, 2016, 2015, and 2014, respectively. These expenses consisted primarily of salaries, project materials, and other product development and enhancement costs.

 

7



Table of Contents

 

Suppliers

 

We outsource certain functions to third parties, including the manufacturing of our MOCVD systems. While we primarily rely on one supplier for the manufacturing of these systems, we maintain a minimum level of internal manufacturing capability for these systems. Refer to Item 1A, “Risk Factors,” for a description of risks associated with our reliance on suppliers and outsourcing partners.

 

Backlog

 

Our backlog consists of orders for which we received a firm purchase order, a customer-confirmed shipment date within twelve months, and a deposit when required. Our backlog increased to $209.2 million at December 31, 2016 from $186.0 million at December 31, 2015. During 2016, we recorded backlog adjustments of approximately $17.9 million primarily related to a partial cancellation of a prior period customer order.

 

Competition

 

In each of the markets that we serve, we face substantial competition from established competitors, some of which have greater financial, engineering, and marketing resources than we do, as well as from smaller competitors. In addition, many of our products face competition from alternative technologies, some of which are more established than those used in our products. Significant factors for customer selection of our tools include system performance, accuracy, repeatability, ease of use, reliability, cost of ownership, and technical service and support. None of our competitors compete with us across all of our product lines.

 

Our competitors include: Aixtron; Advanced Micro-Fabrication Equipment (AMEC); Applied Materials; Canon Anelva; DCA Instruments; Grand Plastics Technology Corporation; Lam Research; Leybold Optics; Mantis Deposition Systems; MBE Komponenten; Oerlikon; Methode Electronics; Orbotech; Oxford Instruments; Riber; Scientech; Taiyo Nippon Sanso; and Tang Optoelectronics Equipment Company (TOPEC).

 

Intellectual Property

 

Our success depends in part on our proprietary technology, and we have over 300 patents in the United States and other countries and have additional applications pending for new inventions.

 

We have patents and exclusive and non-exclusive licenses to patents owned by others covering certain of our products, which we believe provide us with a competitive advantage. We have a policy of seeking patents on inventions concerning new products and improvements as part of our ongoing research, development, and manufacturing activities. We believe that there is no single patent or exclusive or non-exclusive license to patents owned by others that is critical to our operations, as the success of our business depends primarily on the technical expertise, innovation, customer satisfaction, and experience of our employees.

 

Refer to Item 1A, “Risk Factors,” for a description of risks associated with intellectual property.

 

Employees

 

At December 31, 2016 we had 716 employees, of which there were 230 in manufacturing and testing, 75 in sales and marketing, 111 in service and product support, 169 in engineering and research and development, and 131 in information technology, general administration, and finance. The success of our future operations depends on our ability to recruit and retain engineers, technicians, and other highly skilled professionals who are in considerable demand. We feel that we have adequate programs in place to attract, motivate, and retain our employees. We monitor industry practices to make sure that our compensation and employee benefits remain competitive. We believe that our employee relations are good. Refer to Item 1A, “Risk Factors,” for a description of risks associated with employee retention and recruitment.

 

8



Table of Contents

 

Financial Information About Segments and Geographic Areas

 

We operate as a single reportable segment and report our financial results in four geographic regions: the United States; China; Europe, Middle East, and Africa (“EMEA”); and Rest of World (“ROW”). Refer to Note 18, “Segment Reporting and Geographic Information,” in the Notes to the Consolidated Financial Statements for financial data pertaining to our geographic operations. Refer to Item 1A, “Risk Factors,” for a description of risks relating to our geographic operations.

 

Available Information

 

Our corporate website address is www.veeco.com. All filings we make with the Securities and Exchange Commission (“SEC”), including our Annual Report on Form 10-K, our Quarterly Reports on Form 10-Q, our Current Reports on Form 8-K, our proxy statements and any amendments thereto filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended, are available for free in the Investor Relations section of our website as soon as reasonably practicable after they are filed with or furnished to the SEC. Our SEC filings are available to be read or copied at the SEC’s Public Reference Room at 100 F Street, N.E., Washington, D.C. 20549. Information about the operation of the Public Reference Room can be obtained by calling the SEC at 1-800-SEC-0330. Our filings can also be obtained for free on the SEC’s website at www.sec.gov. The reference to our website address does not constitute inclusion or incorporation by reference of the information contained on our website in this Form 10-K or other filings with the SEC, and the information contained on our website is not part of this document.

 

Item 1A. Risk Factors

 

Key Risk Factors That May Impact Future Results

 

Stockholders should consider carefully the risk factors described below. Any of these factors, many of which are beyond our control, could materially adversely affect our business, financial condition, operating results, cash flow, and stock price.

 

Unfavorable market conditions may adversely affect our operating results.

 

Conditions of the markets in which we operate are volatile and have deteriorated significantly in many of the countries and regions in which we do business and may remain or become further depressed in the future. We have experienced and may continue to experience customer rescheduling and, to a lesser extent, cancellations of orders for our products. Adverse market conditions relative to our products could result in:

 

·      reduced demand for our products;

 

·      rescheduling and cancellations of orders for our products, resulting in negative backlog adjustments;

 

·      increased price competition leading to lower margin for our products;

 

·      increased competition from sellers of used equipment or lower-priced alternatives to our products;

 

·      increased inventory obsolescence;

 

·      increased uncollectable amounts due from our customers resulting in increased reserves for doubtful accounts and write-offs of accounts receivable;

 

·      disruptions in our supply chain as we reduce our purchasing volumes and limit our contract manufacturing operations; and

 

·      higher operating costs as a percentage of revenues.

 

If the markets in which we participate fail to experience a recovery or experience a further downturn, this could have a further negative impact on our sales and revenue generation, margins and operating expenses, and profitability.

 

9



Table of Contents

 

A reduction or elimination of foreign government subsidies and economic incentives may adversely affect the future order rate for our MOCVD equipment.

 

We generate a significant portion of our revenue in China. In recent years, the Chinese government has provided various incentives to encourage development of the LED industry, including subsidizing a significant portion of the purchase cost of MOCVD equipment. These subsidies have enabled and encouraged certain customers in this region to purchase more of our MOCVD equipment than these customers might have purchased without these subsidies. The availability of these subsidies has varied over time and may end at some point in the future. A reduction or elimination of these incentives may result in a reduction in future orders for our MOCVD equipment in this region, which could materially and adversely affect our business, financial condition, and results of operations. In addition, in an effort to promote Chinese competition, the Chinese government could impose restrictions on the receipt of these subsidies, including requirements that the purchased equipment be sourced locally.

 

A related risk is that many customers use or had planned to use Chinese government subsidies, in addition to other incentives from the Chinese government, to build new manufacturing facilities or to expand existing manufacturing facilities. Delays in the start-up of these facilities or the cancellation of construction plans altogether, together with other related issues pertaining to customer readiness, could adversely impact the timing of our revenue recognition, could result in order cancellations, a reduction in order backlog, and could have other negative effects on our business, financial condition, and results of operations.

 

The cyclicality of the industries we serve directly affects our business.

 

Our business depends in large part upon the capital expenditures of manufacturers in the LED, mobile communication, data storage, and other device markets. We are subject to the business cycles of these industries, the timing, length, and volatility of which are difficult to predict. These industries have historically been highly cyclical and have experienced significant economic downturns in the last decade. As a capital equipment provider, our revenue depends in large part on the spending patterns of these customers, who often delay expenditures or cancel or reschedule orders in reaction to variations in their businesses or general economic conditions. In downturns, we must be able to quickly and effectively align our costs with prevailing market conditions, as well as motivate and retain key employees. However, because a portion of our costs are fixed, our ability to reduce expenses quickly in response to revenue shortfalls may be limited. Downturns in one or more of these industries have had and will likely have a material adverse effect on our business, financial condition, and operating results. Alternatively, during periods of rapid growth, we must be able to acquire and/or develop sufficient manufacturing capacity to meet customer demand and attract, hire, assimilate, and retain a sufficient number of qualified people. We cannot give assurances that our net sales and operating results will not be adversely affected if our customers experience economic downturns or slowdowns in their businesses.

 

We operate in industries characterized by rapid technological change.

 

Each of the industries in which we operate is subject to rapid technological change. Our ability to remain competitive depends on our ability to enhance existing products and develop and manufacture new products in a timely and cost effective manner and to accurately predict technology transitions. Because new product development commitments must be made well in advance of sales, we must anticipate the future demand for products when selecting which development programs to fund and pursue. Our financial results depend to a great extent on the successful introduction of several new products, many of which require achieving increasingly stringent technical specifications. We cannot be certain that we will be successful in selecting, developing, manufacturing, and marketing new products or new technologies or in enhancing existing products. Our performance may be adversely affected if we are unable to accurately predict evolving market trends and related customer needs and to effectively allocate our resources among new and existing products and technologies.

 

We are also exposed to potential risks associated with unexpected product performance issues. Our product designs and manufacturing processes are complex and could contain unexpected product defects, especially when products are first introduced. Unexpected product performance issues could result in significant costs and damages, including increased service and warranty expenses, the need to provide product replacements or modifications, reimbursement for damages caused by our products, product recalls, related litigation, and product write-offs and disposal costs. These costs could be

 

10



Table of Contents

 

substantial and our reputation could be harmed, resulting in reduced demand for our products and could have a negative effect on our business, financial condition, and results of operations.

 

We have a concentrated customer base, located primarily in a limited number of regions, which operate in highly concentrated industries.

 

Our customer base continues to be highly concentrated. Orders from a relatively limited number of customers have accounted for, and likely will continue to account for, a substantial portion of our net sales, which may lead customers to demand pricing and other terms less favorable to us. Our five largest customers accounted for 39% of our total net sales in 2016. Customer consolidation activity involving some of our largest customers could result in an even greater concentration of our sales in the future. Management changes at key customer accounts could result in a loss of future sales due to vendor preferences or other reasons and may introduce new challenges in managing customer relationships.

 

If a principal customer discontinues its relationship with us or suffers economic setbacks, our business, financial condition, and operating results could be materially and adversely affected. Our ability to increase sales in the future will depend in part upon our ability to obtain orders from new customers. We cannot be certain that we will be able to do so. In addition, because a relatively small number of large manufacturers, many of whom are our customers, dominate the industries in which they operate, it may be especially difficult for us to replace these customers if we lose their business. A significant portion of orders in our backlog are orders from our principal customers.

 

In addition, a substantial investment is required by customers to install and integrate capital equipment into a production line. As a result, once a manufacturer has selected a particular vendor’s capital equipment, we believe that the manufacturer generally relies upon that equipment for the specific production line application and frequently will attempt to consolidate its other capital equipment requirements with the same vendor. Accordingly, if a customer selects a competitor’s product over ours, we could experience difficulty selling to that customer for a significant period of time.

 

Furthermore, we do not have long-term contracts with our customers. As a result, our agreements with our customers do not provide any assurance of future sales, and we are exposed to competitive price pressure on each new order we attempt to obtain. Our failure to obtain new sales orders from new or existing customers would have a negative impact on our results of operations.

 

Our customer base is also highly concentrated in terms of geography, and the majority of our sales are to customers located in a limited number of countries. In 2016, 26% of our total net sales were to customers located in China. Dependence upon sales emanating from a limited number of regions increases our risk of exposure to local difficulties and challenges, such as those associated with regional economic downturns, political instability, fluctuating currency exchange rates, natural disasters, social unrest, pandemics, terrorism, or acts of war. Our reliance upon customer demand arising primarily from a limited number of countries could materially adversely impact our future results of operations.

 

We face significant competition.

 

We face significant competition throughout the world, which may increase as certain markets in which we operate continue to evolve. Some of our competitors have greater financial, engineering, manufacturing, and marketing resources than us. Other competitors are located in regions with lower labor costs and other reduced costs of operation. In addition, our ability to compete in foreign countries against local manufacturers may be hampered by nationalism, social attitudes, laws, regulations, and policies within such countries that favor local companies over U.S. companies or that are otherwise designed to promote the development and growth of local competitors. Furthermore, we face competition from smaller emerging equipment companies whose strategy is to provide a portion of the products and services we offer, with a focused approach on innovative technology for specialized markets. New product introductions or enhancements by us or our competitors could cause a decline in sales or loss of market acceptance of our existing or prior generation products. Increased competitive pressure could also lead to intensified price competition resulting in lower margins. Our failure to compete successfully with these other companies would seriously harm our business.

 

To remain competitive, we may enter into strategic alliances with customers, suppliers, and other third parties to explore new market opportunities and possible technological advancements. These alliances may require significant investments of capital and other resources and often involve the exchange of sensitive confidential information. The success of these

 

11



Table of Contents

 

alliances may depend on factors over which we have limited control and will likely require ongoing cooperation and good faith efforts from our strategic partners. Strategic alliances are inherently subject to significant risks, and the inability to effectively manage these risks could materially and adversely affect our business and operating results.

 

The timing of our orders, shipments, and revenue recognition may cause our quarterly operating results to fluctuate significantly.

 

We derive a substantial portion of our net sales in any fiscal period from the sale of a relatively small number of high-priced systems. As a result, the timing of recognition of revenue for a single transaction could have a material effect on our sales and operating results for a particular fiscal period. As is typical in our industry, orders, shipments, and customer acceptances often occur during the last few weeks of a quarter. As a result, a delay of only a week or two can impact which period revenue is reported in and can cause volatility in our revenue for a given reporting period. Our quarterly results have fluctuated significantly in the past, and we expect this trend to continue. If our orders, shipments, net sales, or operating results in a particular quarter do not meet expectations, our stock price may be adversely affected.

 

Our sales cycle is long and unpredictable.

 

Historically, we have experienced long and unpredictable sales cycles (the period between our initial contact with a potential customer and the time when we recognize revenue from that customer). Our sales cycle can exceed twelve months. The timing of an order often depends on the capital expenditure budget cycle of our customers, which is completely out of our control. In addition, the time it takes us to build a product to customer specifications typically ranges from three to six months. When coupled with the fluctuating amount of time required for shipment, installation, and final acceptance, our sales cycles often vary widely, and variations in length of this period can cause further fluctuations in our operating results. As a result of our lengthy sales cycle, we may incur significant research, development, selling, general, and/or administrative expenses before we generate revenues for these products. We may never generate the anticipated revenues if a customer cancels or changes plans. Variations in the length of our sales cycle could also cause our sales and, therefore, our cash flow and results of operations to fluctuate widely from period to period.

 

Our backlog is subject to customer cancellation or modification which could result in decreased sales, increased inventory obsolescence, and/or liabilities to our suppliers for products no longer needed.

 

Customer purchase orders may be cancelled or rescheduled by the customer, sometimes with limited or no penalties, which may result in increased and/or unrecoverable costs for the Company. We adjust our backlog for such cancellations, contract modifications, and delivery delays that result in a delivery period in excess of one year, among other items. A downturn in one or more of our businesses could result in increases in order cancellations and/or postponements.

 

We write-off excess and obsolete inventory based on historical trends, future usage forecasts, and other factors including the consideration of the amount of backlog we have on hand. If our backlog is canceled or modified, our estimates of future product demand may prove to be inaccurate, in which case we may have understated the write-off required for excess and obsolete inventory. In the future, if we determine that our inventory is overvalued, we will be required to recognize such costs in our financial statements at the time of such determination. In addition, we place orders with our suppliers based on our customers’ orders. If our customers cancel their orders with us, we may not be able to cancel our orders with our suppliers or may be required to take a charge for these cancelled commitments to our suppliers. Any such charges could be material to our results of operations and financial condition.

 

Our failure to estimate customer demand accurately could result in inventory obsolescence, liabilities to our suppliers for products no longer needed, and/or manufacturing interruptions or delays which could affect our ability to meet customer demand.

 

Our business depends on our ability to accurately forecast and supply equipment, services, and related products that meet the rapidly changing technical and volume requirements of our customers, which depends in part on the timely delivery of parts, components, and subassemblies (collectively, “parts”) from suppliers. Uncertain worldwide economic conditions and market instabilities make it difficult for us (and our customers and our suppliers) to accurately forecast future product demand. If actual demand for our products is different than expected, we may purchase more/fewer parts than necessary or incur costs for canceling, postponing, or expediting delivery of parts. If we overestimate the demand for our products,

 

12



Table of Contents

 

excess inventory could result, which could be subject to heavy price discounting, which could become obsolete, and/or which could subject us to liabilities to our suppliers for products no longer needed. Similarly, we may be harmed in the event that our competitors overestimate the demand for their products and engage in heavy price discounting practices as a result. In addition, the volatility of demand for capital equipment increases capital, technical, and other risks for companies in our supply chain.

 

Furthermore, some key parts may be subject to long lead-times and/or obtainable only from a single supplier or limited group of suppliers, and some sourcing or subassembly is provided by suppliers located in countries other than the United States. We may experience significant interruptions of our manufacturing operations, delays in our ability to deliver products or services, increased costs, or customer order cancellations as a result of:

 

·                 the failure or inability of suppliers to timely deliver quality parts;

 

·                 volatility in the availability and cost of materials;

 

·                 difficulties or delays in obtaining required import or export approvals;

 

·                 information technology or infrastructure failures;

 

·                 natural disasters (such as earthquakes, tsunamis, floods, or storms); or

 

·                 other causes (such as regional economic downturns, pandemics, political instability, terrorism, or acts of war) that could result in delayed deliveries, manufacturing inefficiencies, increased costs, or order cancellations.

 

In addition, in the event of an unanticipated increase in demand for our products, our need to rapidly increase our business and manufacturing capacity may be limited by working capital constraints of our suppliers and may exacerbate any interruptions in our manufacturing operations and supply chain and the associated effect on our working capital. Any or all of these factors could materially and adversely affect our business, financial condition, and results of operations.

 

Our failure to successfully manage our outsourcing activities or failure of our outsourcing partners to perform as anticipated could adversely affect our results of operations and our ability to adapt to fluctuating order volumes.

 

To better align our costs with market conditions, increase the percentage of variable costs relative to total costs, and to increase productivity and operational efficiency, we have outsourced certain functions to third parties, including the manufacture of our MOCVD systems. We rely heavily on our outsourcing partners to perform their contracted functions to allow us the flexibility to adapt to changing market conditions, including periods of significantly diminished order volumes. If our outsourcing partners do not perform as required, or if our outsourcing model does not allow us to realize the intended cost savings and flexibility, our results of operations (and those of our third party providers) may be adversely affected. Disputes and possibly litigation involving third party providers could result, and we could suffer damage to our reputation. Dependence on contract manufacturing and outsourcing may also adversely affect our ability to bring new products to market. Although we attempt to select reputable providers, it is possible that one or more of these providers could fail to perform as we expect. In addition, the role of third party providers has required and will continue to require us to implement changes to our existing operations and adopt new procedures and processes for retaining and managing these providers in order to realize operational efficiencies, assure quality, and protect our intellectual property. If we do not effectively manage our outsourcing strategy or if third party providers do not perform as anticipated, we may not realize the benefits of productivity improvements, and we may experience operational difficulties, increased costs, manufacturing and/or installation interruptions or delays, inefficiencies in the structure and/or operation of our supply chain, loss of intellectual property rights, quality issues, increased product time-to-market and/or inefficient allocation of human resources, any or all of which could materially and adversely affect our business, financial condition, and results of operations.

 

We rely on a limited number of suppliers, some of whom are our sole source for particular components.

 

We currently outsource certain functions to third parties, including the manufacture of our MOCVD systems. We rely on a small number of suppliers for the manufacturing of these systems. While we maintain some level of internal manufacturing capability for these systems, the failure of our suppliers to meet their contractual obligations under our supply arrangements and our inability to make alternative arrangements or resume the manufacture of these systems

 

13



Table of Contents

 

ourselves could have a material adverse effect on our relationships with our customers and/or our business, financial condition, and results of operations.

 

In addition, certain of the components and sub-assemblies included in our products are obtained from a single source or a limited group of suppliers. Our inability to develop alternative sources, if necessary, could result in a prolonged interruption in supply or a significant increase in the price of one or more components, which could adversely affect our business, financial condition, and results of operations.

 

Our inability to attract, retain, and motivate employees could have a material adverse effect on our business.

 

Our success depends upon our ability to attract, retain, and motivate employees, including those in executive, managerial, engineering, and marketing positions, as well as highly skilled and qualified technical personnel and personnel to implement and monitor our financial and managerial controls and reporting systems. Attracting, retaining, and motivating such qualified personnel may be difficult due to challenging industry conditions, competition for such personnel by other technology companies, consolidations and relocations of operations, and workforce reductions, and there can be no assurance that we will be successful in recruiting or retaining key personnel. We have entered into employment agreements with certain key personnel but our inability to attract, retain, and motivate key personnel could have a material adverse effect on our business, financial condition, and results of operations.

 

Our acquisition strategy subjects us to risks associated with evaluating and pursuing these opportunities and integrating these businesses.

 

We have completed several significant acquisitions in the past, and we will consider acquisitions of, or investments in, other businesses in the future. Acquisitions involve numerous risks, many of which are unpredictable and beyond our control, including, but not limited to:

 

·                 difficulties and increased costs in integrating the personnel, operations, technologies, and products of acquired companies;

 

·                 diversion of management’s attention while evaluating, pursuing, and integrating the business to be acquired;

 

·                 the inability to complete proposed transactions as anticipated, resulting in obligations to pay professional and other expenses, including any applicable termination fees;

 

·                 potential loss of key employees of acquired companies, especially if a relocation or change in responsibilities is involved;

 

·                 difficulties in managing geographically dispersed operations in a cost-effective manner;

 

·                 the unattainability of expected synergies;

 

·                 unknown, underestimated, and/or undisclosed commitments or liabilities;

 

·                 increased amortization expense relating to intangible assets; and

 

·                 other adverse effects on our business, including the potential impairment and write-down of amounts capitalized as intangible assets and goodwill as part of the acquisition, as a result of technological advancements or worse-than-expected performance by the acquired company.

 

Our inability to effectively manage these risks could materially and adversely affect our business, financial condition, and results of operations. In addition, if we issue equity securities to pay for an acquisition, the ownership percentage of our then-current shareholders would be reduced and the value of the shares held by these shareholders could be diluted, which could adversely affect the price of our stock. If we use cash to pay for an acquisition, the payment could significantly reduce the cash that would be available to fund our operations or other purposes.

 

Timing of market adoption of LED technology for general lighting is uncertain.

 

Our future business prospects depend largely on the market adoption of products that incorporate our technologies. Potential barriers to such adoption include higher initial costs and customer familiarity with, and substantial investment

 

14



Table of Contents

 

and know-how in, existing technologies. These barriers apply to the adoption of LED technology for general illumination applications, including residential, commercial, and street lighting markets. While the use of LED technology for general lighting has grown in recent years, challenges remain and widespread adoption (and the related demand for our products) may not occur at currently projected rates. Furthermore, the adoption of, or changes in, government policies that discourage the use of traditional lighting technologies may impact LED adoption.

 

Our sales to manufacturers are highly dependent on sales of consumer electronics applications, which can experience significant volatility due to seasonal and other factors and materially adversely impact our future results of operations.

 

The demand for LEDs, HDDs, and our other products is highly dependent on sales of consumer electronics, such as televisions and computer monitors, computers, tablets, digital video recorders, smartphones, cell phones, and other mobile devices. Manufacturers of LEDs are among our largest customers and account for a substantial portion of our revenue. Factors that could influence the levels of spending on consumer electronic products include consumer confidence, access to credit, volatility in fuel and other energy costs, conditions in the residential real estate and mortgage markets, labor and healthcare costs, and other macroeconomic factors affecting consumer spending behavior. These and other economic factors have had and could continue to have a material adverse effect on the demand for our customers’ products and, in turn, on our customers’ demand for our products and services impacting our financial condition and results of operations. Furthermore, manufacturers of LEDs have in the past overestimated their potential for market share growth. If this growth is overestimated, we may experience cancellations of orders in backlog, rescheduling of customer deliveries, obsolete inventory, and/or liabilities to our suppliers for products no longer needed.

 

In addition, the demand for some of our customers’ products can be even more volatile and unpredictable due to the possibility of competing technologies, such as flash memory as an alternative to HDDs. Unpredictable fluctuations in demand for our customers’ products or rapid shifts in demand from our customers’ products to alternative technologies could materially adversely impact our future results of operations.

 

Our operating results have been, and may continue to be, adversely affected by tightening credit markets.

 

As a global company with worldwide operations, we are subject to volatility and adverse consequences associated with economic downturns in different parts of the world. In the event of a downturn, many of our customers may delay or further reduce their purchases of our products and services. If negative conditions in the credit markets prevent our customers from obtaining credit or necessary financing, product orders in these channels may decrease, which could result in lower revenue. In addition, we may experience cancellations of orders in backlog, rescheduling of customer deliveries, and pricing pressures. If our suppliers face challenges in obtaining credit, in selling their products, or otherwise in operating their businesses, they may become unable to continue to offer the materials we use to manufacture our products, which could impair our operations.

 

In addition, we finance some of our sales through trade credit. In addition to ongoing credit evaluations of our customers’ financial condition, we seek to mitigate our credit risk by obtaining deposits and/or letters of credit on certain of our sales arrangements. We could suffer significant losses if a customer whose accounts receivable we have not secured fails or is otherwise unable to pay us, or if financial institutions providing letters of credit become insolvent. A significant loss in collections on our accounts receivable would have a negative impact on our financial condition and results of operations.

 

We are exposed to the risks of operating a global business, including the need to obtain export licenses for certain of our shipments and political risks in the countries we operate.

 

Most of our sales are to customers located outside of the United States. We expect sales from non-U.S. markets to continue to represent a significant portion of our sales in the future. Our non-U.S. sales and operations are subject to risks inherent in conducting business outside the United States, many of which are outside our control, including:

 

·                 difficulties in managing a global enterprise, including staffing, managing distributors and representatives, and repatriating cash in a tax efficient manner;

 

·                 regional economic downturns, varying foreign government support, and unstable political environments;

 

15



Table of Contents

 

·                 political and social attitudes, laws, rules, regulations, and policies within countries that favor local companies over U.S. companies, including government-supported efforts to promote the development and growth of local competitors;

 

·                 pressures from foreign customers and foreign governments for us to increase our operations and sourcing in the foreign country;

 

·                 longer sales cycles and difficulty in collecting accounts receivable;

 

·              multiple, conflicting, and changing governmental laws and regulations, including varying labor laws, tax regulations, import/export controls, changes to trade treaties, possible trade wars and other trade barriers and uncertainties;

 

·                 reliance on various information systems and information technology to conduct our business, which may be vulnerable to cyberattacks by third parties or breached due to employee error, misuse or other causes that could result in business disruptions, loss of or damage to intellectual property, transaction errors, processing inefficiencies, or other adverse consequences should our security practices and procedures prove ineffective; and

 

·                 different customs and ways of doing business.

 

These challenges, many of which are associated with sales into the Asia-Pacific region, may continue and recur again in the future, which could have a material adverse effect on our business. In addition, political instability, terrorism, acts of war, tsunamis, or epidemics in regions where we operate may adversely affect or disrupt our business and results of operations.

 

Furthermore, products which are either manufactured in the United States or based on U.S. technology are subject to the U.S. Export Administration Regulations (“EAR”) when exported to and re-exported from international jurisdictions, in addition to the local jurisdiction’s export regulations applicable to individual shipments. Currently, our MOCVD deposition systems and certain of our other products are controlled for export under the EAR. Licenses or proper license exceptions may be required for the shipment of our products to certain countries. Obtaining an export license requires cooperation from the customer and customer-facility readiness and can add time to the order fulfillment process. While we have generally been successful in obtaining export licenses in a timely manner, there can be no assurance that this will continue or that an export license can be obtained in each instance where it is required. If an export license is required but cannot be obtained, then we will not be permitted to export the product to the customer. The administrative processing, potential delay, and risk of ultimately not obtaining an export license pose a particular disadvantage to us relative to our non-U.S. competitors who are not required to comply with U.S. export controls. Non-compliance with the EAR or other applicable export regulations could result in a wide range of penalties including the denial of export privileges, fines, criminal penalties, and the seizure of commodities. In the event that any export regulatory body determines that any of our shipments violate applicable export regulations, we could be fined significant sums and/or our export capabilities could be restricted, which could have a material adverse impact on our business.

 

We may be exposed to liabilities under the Foreign Corrupt Practices Act and any determination that we violated these or similar laws could have a material adverse effect on our business.

 

We are subject to the Foreign Corrupt Practices Act (“FCPA”) and other laws that prohibit improper payments or offers of payments to foreign government officials, as defined by the statute, for the purpose of obtaining or retaining business. In addition, many of our customers have policies limiting or prohibiting us from providing certain types or amounts of entertainment, meals, or gifts to their employees. It is our policy to implement safeguards to discourage these practices by our employees and representatives. However, our safeguards may prove to be ineffective and our employees, consultants, sales agents, or distributors may engage in conduct for which we may be held responsible. In addition, we may acquire a company that has engaged in unlawful conduct in the past, and be held responsible for this conduct through successor liability principles. Violations of the FCPA or similar laws or similar customer policies may result in severe criminal or civil sanctions or the loss of supplier privileges to a customer, and we may be subject to other liabilities, which could negatively affect our business, financial condition, and results of operations.

 

16



Table of Contents

 

We are subject to internal control evaluations and attestation requirements of Section 404 of the Sarbanes-Oxley Act and any delays or difficulty in satisfying these requirements or negative reports concerning our internal controls could adversely affect our future results of operations and our stock price.

 

Pursuant to Section 404 of the Sarbanes-Oxley Act of 2002, we must include in our Annual Report on Form 10-K a report by management on the effectiveness of our internal control over financial reporting. Ongoing compliance with this requirement is complex, costly, time-consuming, and is subject to significant judgment. If our internal controls are ineffective or if our management does not timely assess the adequacy of such internal controls, our ability to file timely and accurate periodic reports may be impeded. Any delays in filing may cause us to face the following risks and concerns, among others:

 

·                 concern on the part of our customers, partners, investors, and employees about our financial condition and filing delay status, including the potential loss of business opportunities;

 

·                 significant time and expense required to complete delayed filings and the distraction of our senior management team and board of directors as we work to complete delayed filings;

 

·                 investigations by the SEC and other regulatory authorities of the Company and/or our management;

 

·                 limitations on our ability to raise capital;

 

·                 suspension or termination of our stock listing on The NASDAQ Stock Market and the removal of our stock as a component of certain stock market indices; and

 

·                 general reputational harm.

 

Any or all of the foregoing could result in the commencement of stockholder lawsuits against the Company. Any such litigation, as well as any proceedings that could arise as a result of a filing delay and the circumstances which gave rise to it, may be time consuming and expensive, may divert management attention from the conduct of our business, could have a material adverse effect on our business, financial condition, and results of operations, and may expose us to costly indemnification obligations to current or former officers, directors, or other personnel, regardless of the outcome of such matters, which may not be adequately covered by insurance.

 

Changes in accounting pronouncements or taxation rules or practices may adversely affect our financial results.

 

Changes in accounting pronouncements or taxation rules or practices can have a significant effect on our reported results. New accounting pronouncements or taxation rules and varying interpretations of accounting pronouncements or taxation practices have occurred and may occur in the future. New rules, changes to existing rules, or the questioning of our current or past practices, such as those associated with our transfer pricing, may adversely affect our reported financial results.

 

Our income taxes can change.

 

We are subject to income tax on a jurisdictional or legal entity basis and significant judgment is required in certain instances to allocate our taxable income to a jurisdiction and to determine the related income tax expense and benefits. Losses in one jurisdiction generally may not be used to offset profits in other jurisdictions. As a result, changes in the mix of our earnings (or losses) between jurisdictions, among other factors, could alter our overall effective income tax rate, possibly resulting in significant tax rate increases.

 

We are regularly audited by various tax authorities. Income tax audit assessments or changes in tax laws, regulations, or other interpretations may result in increased tax provisions which could materially affect our operating results in the period or periods in which such determinations are made or changes occur.

 

In addition, our effective tax rate could increase if we determine that it is no longer more likely than not that we are able to utilize our remaining net deferred tax assets, if we are unable to generate sufficient future taxable income in certain jurisdictions, or if we are otherwise required to increase our valuation allowances against our deferred tax assets.

 

17



Table of Contents

 

We may be required to take additional impairment charges on assets.

 

We are required to assess goodwill and indefinite-lived intangible assets annually for impairment, or on an interim basis, whenever certain events occur or circumstances change, such as an adverse change in business climate or a decline in the overall industry, that would more likely than not reduce the fair value below its carrying amount. We are also required to test our long-lived assets, including acquired intangible assets and property, plant, and equipment, for recoverability and impairment whenever there are indicators of impairment, such as an adverse change in business climate.

 

As part of our long-term strategy, we may pursue future acquisitions of other companies or assets which could potentially increase our assets. Adverse changes in business conditions could materially impact our estimates of future operations and result in impairment charges to these assets. In the future, a significant decline in the market price of our common stock could indicate a decline in the fair value of our reporting unit such that goodwill becomes impaired. If our assets were impaired, our financial condition and results of operations could be materially and adversely affected.

 

We have indebtedness in the form of convertible senior notes which could adversely affect our financial position, prevent us from implementing our strategy, and dilute the ownership interest of our existing shareholders.

 

In January of 2017, we issued $345 million of 2.70% Convertible Senior Notes due 2023 (“Convertible Notes”). The Convertible Notes are convertible into Company common stock at an initial conversion rate of 24.98 shares of Company common stock per $1,000 principal amount of the Convertible Notes. The Company is obligated to repurchase the Convertibles Notes upon the occurrence of certain events described in the indenture relating to the Convertible Notes. The degree to which we are leveraged could have negative consequences, including but not limited to the following:

 

·                 we may be more vulnerable to economic downturns, less able to withstand competitive pressures, and less flexible in responding to changing business and economic conditions;

 

·                 our ability to obtain additional financing in the future for working capital, capital expenditures, acquisitions, general corporate, or other purposes may be limited;

 

·                 a substantial portion of our cash flows from operations in the future may be required for the payment of the principal amount of our existing indebtedness when it becomes due; and

 

·                 we may elect to make cash payments upon any conversion of the Convertible Notes, which would reduce our cash on hand.

 

Our ability to meet our payment obligations under the Convertible Notes depends on our ability to generate significant cash flow in the future. This, to some extent, is subject to general economic, financial, competitive, legislative, and regulatory factors, as well as other factors, that are beyond our control. There can be no assurance that our business will generate cash flow from operations, or that additional capital will be available to us, in an amount sufficient to enable us to meet our debt payment obligations and to fund other liquidity needs. If we are unable to generate sufficient cash flow to service our debt obligations, we may need to refinance or restructure our debt, sell assets, reduce or delay capital investments, or seek to raise additional capital. If we were unable to implement one or more of these alternatives, we may be unable to meet our debt payment obligations, which could have a material adverse effect on our business, results of operations, or financial condition.

 

Furthermore, if the Convertible Notes are converted into shares of Company common stock, the issuance of additional shares of Company common stock would dilute the ownership interest of our existing shareholders and could have a dilutive effect on our net income per share to the extent that the price of our common stock exceeds the conversion price of the Convertible Notes. In addition, any sales in the public market of our common stock issuable upon conversion of the Convertible Notes could adversely affect prevailing market prices of our common stock.

 

The accounting method for convertible debt securities that may be settled in cash, such as the Convertible Notes, could have a material effect on our reported financial results.

 

Under Accounting Standards Codification 470-20, Debt with Conversion and Other Options, which we refer to as ASC

 

18



Table of Contents

 

470-20, an entity must separately account for the liability and equity components of certain convertible debt instruments (such as the Convertible Notes) that may be settled entirely or partially in cash upon conversion in a manner that reflects the issuer’s economic interest cost. The effect of ASC 470-20 on the accounting for the Convertible Notes is that the equity component is required to be included in the additional paid-in capital section of stockholders’ equity on our consolidated balance sheet, and the value of the equity component would be treated as original issue discount for purposes of accounting for the debt component of the Convertible Notes. As a result, we will be required to record a greater amount of non-cash interest expense in current periods presented as a result of the amortization of the discounted carrying value of the Convertible Notes to their face amount over the term of the Convertible Notes. We will report lower net income in our financial results because ASC 470-20 will require interest to include both the current period’s amortization of the debt discount and the instrument’s coupon interest, which could adversely affect our financial results, the trading price of our common stock, and the trading price of the Convertible Notes.

 

In addition, under certain circumstances, convertible debt instruments (such as the Convertible Notes) that may be settled entirely or partly in cash can be accounted for utilizing the treasury stock method, the effect of which is that the shares issuable upon conversion of the Convertible Notes are not included in the calculation of diluted earnings per share except to the extent that the conversion value of the Convertible Notes exceeds their principal amount. Under the treasury stock method, for diluted earnings per share purposes, the transaction is accounted for as if the number of shares of common stock that would be necessary to settle such excess, if we elected to settle such excess in shares, are issued. We cannot be sure that the accounting standards in the future will continue to permit the use of the treasury stock method or that we will continue to expect to settle the principal balance in cash. If we are unable to use the treasury stock method in accounting for the shares issuable upon conversion of the Convertible Notes, our diluted earnings per share could be adversely affected.

 

The price of our common shares is volatile and could decline significantly.

 

The stock market in general and the market for technology stocks in particular has experienced volatility. If these industry-based market fluctuations continue, the trading price of our common shares could decline significantly independent of the overall market, and shareholders could lose all or a substantial part of their investment. The market price of our common shares could fluctuate significantly in response to several factors, including, among others:

 

·                 difficult macroeconomic conditions, unfavorable geopolitical events, and general stock market uncertainties, such as those occasioned by a global liquidity crisis and a failure of large financial institutions;

 

·                 receipt of large orders or cancellations of orders for our products;

 

·                 issues associated with the performance and reliability of our products;

 

·                 actual or anticipated variations in our results of operations;

 

·                 announcements of financial developments or technological innovations;

 

·                 our failure to meet the performance estimates of investment research analysts;

 

·                 changes in recommendations and/or financial estimates by investment research analysts;

 

·                 strategic transactions, such as acquisitions, divestitures, or spin-offs;

 

·                 the dilutive impact of our Convertible Notes; and

 

·                 the occurrence of major catastrophic events.

 

Significant price and value fluctuations have occurred with respect to our publicly traded securities and technology companies generally. The price of our common shares is likely to be volatile in the future. In the past, securities class action litigation often has been brought against a company following periods of volatility in the market price of its securities. If similar litigation were pursued against us, it could result in substantial costs and a diversion of management’s attention and resources, which could materially and adversely affect our financial condition, results of operations, and liquidity.

 

19



Table of Contents

 

The enforcement and protection of our intellectual property rights may be expensive and/or divert our limited resources.

 

Our success depends in part upon the protection of our intellectual property rights. We rely primarily on patent, copyright, trademark, and trade secret laws, as well as nondisclosure and confidentiality agreements and other methods, to protect our proprietary information, technologies, and processes. We own various U.S. and international patents and have additional pending patent applications relating to certain of our products and technologies. The process of seeking patent protection is lengthy and expensive, and we cannot be certain that pending or future applications will actually result in issued patents or that issued patents will be of sufficient scope or strength to provide meaningful protection or commercial advantage. In addition, our intellectual property rights may be circumvented, invalidated, or rendered obsolete by the rapid pace of technological change, or through efforts by others to reverse engineer our products or design around patents that we own. Given these limitations, our success will depend in part upon our ability to innovate ahead of our competitors.

 

Furthermore, policing unauthorized use of our products and technologies is difficult and time consuming, and the laws of other countries may less effectively protect our proprietary rights than U.S. laws. Our outsourcing strategy requires that we share certain portions of our technology with our outsourcing partners, which poses additional risks of infringement and trade secret misappropriation. Infringement of our rights by a third party, possibly for purposes of developing and selling competing products, could result in uncompensated lost market and revenue opportunities. Similar exposure could result in the event that former employees seek to compete with us through their unauthorized use of our intellectual property and proprietary information. We cannot be certain that the steps we have taken will prevent the misappropriation or unauthorized use of our proprietary information and technologies, particularly in foreign countries where the laws may not protect our proprietary intellectual property rights as fully or as readily as U.S. laws. Further, we cannot be certain that the laws and policies of any country, including the United States, with respect to intellectual property enforcement or licensing will not be changed in a way detrimental to the sale or use of our products or technology.

 

We may need to litigate to enforce our intellectual property rights, protect our trade secrets, or determine the validity and scope of proprietary rights of others. As a result of any such litigation, we could lose our ability to enforce one or more patents, incur substantial unexpected costs, and jeopardize relationships with current or prospective customers or suppliers. Any action we take to enforce our intellectual property rights could be costly and could absorb significant management time and attention, which, in turn, could negatively impact our operating results. In addition, failure to protect our trademark rights could impair our brand identity.

 

We may be subject to claims of intellectual property infringement by others.

 

From time to time we have received communications from other parties asserting the existence of patent or other rights which they believe cover certain of our products. We also periodically receive notice from customers who believe that we are required to indemnify them for damages they may incur related to infringement claims made against these customers by third parties. Our customary practice is to evaluate such assertions and to consider the available alternatives, including whether to seek a license, if appropriate. However, we cannot ensure that licenses can be obtained or, if obtained, will be on acceptable terms or that costly litigation or other administrative proceedings will not occur. If we are not able to resolve a claim, negotiate a settlement of the matter, obtain necessary licenses on commercially reasonable terms, and/or successfully prosecute or defend our position, our business, financial condition, and results of operations could be materially and adversely affected.

 

We are subject to foreign currency exchange risks.

 

We are exposed to foreign currency exchange rate risks that are inherent in our anticipated sales, sales commitments, and assets and liabilities that are denominated in currencies other than the U.S. dollar. Although we attempt to mitigate our exposure to fluctuations in currency exchange rates, hedging activities may not always be available or adequate to mitigate the impact of our exchange rate exposure. Failure to sufficiently hedge or otherwise manage foreign currency risks properly could materially and adversely affect our financial condition, results of operations, and liquidity.

 

20



Table of Contents

 

If we are subject to cyber-attacks we could incur substantial costs and, if such attacks are successful, we could incur significant liabilities, reputational harm, and disruption to our operations.

 

We manage, store, and transmit proprietary information and sensitive data relating to our operations. We may be subject to breaches of the information technology systems we use for these purposes. Experienced computer programmers and hackers may be able to penetrate our network security and misappropriate and/or compromise our confidential information (and/or third party confidential information), create system disruptions, or cause shutdowns. Computer programmers and hackers also may be able to develop and deploy viruses, worms, and other malicious software programs that attack our systems or our products, or that otherwise exploit any security vulnerabilities.

 

The costs to address the foregoing security problems and security vulnerabilities before or after a cyber-incident could be significant. Our remediation efforts may not be successful and could result in interruptions, delays, or cessation of service, and loss of existing or potential customers, impeding our sales, manufacturing, distribution, or other critical functions. In addition, breaches of our security measures and the unapproved dissemination of proprietary information or sensitive data about us, our customers or other third parties, could expose us, our customers, or other third parties to a risk of loss or misuse of this information, result in litigation and potential liability for us, damage our reputation, or otherwise harm our business.

 

We have adopted certain measures that may have anti-takeover effects which may make an acquisition of our Company by another company more difficult.

 

We have adopted, and may in the future adopt, certain measures that may have the effect of delaying, deferring, or preventing a takeover or other change in control of our Company, any of which a holder of our common stock might not consider to be in the holder’s best interest. These measures include:

 

·                 “blank check” preferred stock;

 

·                 a classified board of directors; and

 

·                 certain other certificate of incorporation and bylaws provisions.

 

Our board of directors has the authority to issue up to 500,000 shares of preferred stock and to fix the rights (including voting rights), preferences, and privileges of these shares (“blank check” preferred). Such preferred stock may have rights, including economic rights, senior to our common stock. As a result, the issuance of the preferred stock could have a material adverse effect on the price of our common stock and could make it more difficult for a third party to acquire a majority of our outstanding common stock.

 

Our board of directors is divided into three classes with each class serving a staggered three-year term. The existence of a classified board makes it more difficult for our shareholders to change the composition (and therefore the policies) of our board of directors in a relatively short period of time.

 

We have adopted certain certificate of incorporation and bylaws provisions which have anti-takeover effects. These include: (a) requiring certain actions to be taken at a meeting of shareholders rather than by written consent, (b) requiring a super-majority of shareholders to approve certain amendments to our bylaws, (c) limiting the maximum number of directors, and (d) providing that directors may be removed only for “cause.” These measures and those described above may have the effect of delaying, deferring, or preventing a takeover or other change in control of our Company that a holder of our common stock might consider to be in the holder’s best interest.

 

In addition, we are subject to the provisions of Section 203 of the General Corporation Law of the State of Delaware, which prohibits a Delaware corporation from engaging in any business combination, including mergers and asset sales, with an interested stockholder (generally, a 15% or greater stockholder) for a period of three years after the date of the transaction in which the person became an interested stockholder, unless the business combination is approved in a prescribed manner. The operation of Section 203 may have anti-takeover effects, which could delay, defer, or prevent a takeover attempt that a holder of our common stock might consider to be in the holder’s best interest.

 

21



Table of Contents

 

Despite the above measures, an activist shareholder could undertake action to implement governance, strategic, or other changes to the Company which a holder of our common stock might not consider to be in the holder’s best interest. Such activities could interfere with our ability to execute our strategic plans, be costly and time consuming, disrupt our operations, and divert the attention of management and our employees.

 

We are subject to risks of non-compliance with environmental, health, and safety regulations.

 

We are subject to environmental, health, and safety regulations in connection with our business operations, including but not limited to regulations related to the development, manufacture and use of our products, recycling and disposal of related materials, and the operation and use of our facilities and real property. Failure or inability to comply with existing or future environmental and safety regulations, which vary from jurisdiction to jurisdiction, could result in significant remediation liabilities, the imposition of fines, and/or the suspension or termination of research, development, or use of certain of our products, each of which could have a material adverse effect on our business, financial condition, and results of operations. In addition, some of our operations involve the storage, handling, and use of hazardous materials that may pose a risk of fire, explosion, or environmental release. Such events could result from acts of terrorism, natural disasters, or operational failures and may result in injury or loss of life to our employees and others, local environmental contamination, and property damage. These events might cause a temporary shutdown of an affected facility, or portion thereof, and we could be subject to penalties or claims as a result. Each of these events could have a material adverse effect on our business, financial condition, and results of operations.

 

Regulations related to conflict minerals will force us to incur additional expenses, may make our supply chain more complex, and may result in damage to our relationships with customers.

 

Under the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010, or the Dodd-Frank Act, the SEC adopted requirements for companies that manufacture products that contain certain minerals and metals, known as conflict minerals. These rules require public companies to perform diligence and to report annually to the SEC whether such minerals originate from the Democratic Republic of Congo and adjoining countries. The implementation of these requirements could adversely affect the sourcing, availability, and pricing of minerals we use in the manufacture of our products. In addition, we have incurred and will continue to incur additional costs to comply with the disclosure requirements, including costs related to determining the source of any of the relevant minerals used in our products. Given the complexity of our supply chain, we may not be able to ascertain the origins of these minerals used in our products through the due diligence procedures that we implement, which may harm our reputation. We may also face difficulties in satisfying customers who may require that our products be certified as conflict mineral free, which could harm our relationships with these customers and lead to a loss of revenue. These requirements could limit the pool of suppliers that can provide conflict-free minerals, and we may be unable to obtain conflict-free minerals at competitive prices, which could increase our costs and adversely affect our manufacturing operations and our profitability.

 

We have significant operations in locations which could be materially and adversely impacted in the event of a natural disaster, an act of terrorism, or other significant disruption.

 

Our operations in the United States, the Asia-Pacific region, and in other areas could be subject to natural disasters or other significant disruptions, including earthquakes, tsunamis, fires, hurricanes, floods, water shortages, other extreme weather conditions, medical epidemics, power shortages and blackouts, telecommunications failures, and other natural and manmade disasters or disruptions. In the event of such a natural disaster or other disruption, we could experience disruptions or interruptions to our operations or the operations of our suppliers, distributors, resellers or customers, destruction of facilities, and/or loss of life, all of which could materially increase our costs and expenses and materially and adversely affect our business, financial condition, and results of operations. In addition, various regions of the world in which we do business are subject to the threat of terrorism and acts of war. Any act of terrorism or war that affects the economy or the industries in which we operate could result in significant harm to us, including the loss of life and property, manufacturing and transportation delays, disruptions in our supply chain, the need to comply with enhanced security measures, and other increased costs.

 

22



Table of Contents

 

If we are unable to complete our contemplated acquisition of Ultratech, Inc., our expected financial results and the market value of our common stock could be adversely affected.

 

On February 2, 2017, we entered into an Agreement and Plan of Merger (the “Merger Agreement”) with Ultratech, Inc. to acquire all of Ultratech’s issued and outstanding stock through a merger of Ultratech with one of our subsidiaries, Ulysses Acquisition Subsidiary Corp. (the “merger”). Consummation of the merger is subject to customary conditions to closing, including the receipt of required regulatory approvals. If any condition to the merger is not satisfied or waived, the merger will not be completed. The parties also may terminate the Merger Agreement under certain circumstances. Any or all of the preceding could jeopardize our ability to consummate the merger on the negotiated terms. To the extent the merger is not completed for any reason, we would have devoted substantial resources and management attention to the transaction without realizing the accompanying benefits expected by our management, and our financial condition and results of operations and the market value of our stock may be adversely affected. Additional risks and uncertainties associated with the merger include:

 

·                 various conditions to the closing of the merger may not be satisfied or waived;

 

·                 the inability to obtain consents from third parties who have “change of control” or similar clauses in their agreements with Ultratech;

 

·                 the failure to consummate the merger may result in negative publicity and a negative impression of us in the investment community;

 

·                 litigation relating to the merger could be commenced, which may prevent the merger from becoming effective within the expected time frame, if at all;

 

·                 required regulatory approvals from governmental entities may delay the merger or result in the imposition of conditions that could cause the abandonment of the merger; and

 

·                 the attention of our employees and management may be diverted due to activities related to the merger, which may harm our relationships with our employees, customers, distributors, suppliers, and other business partners, may impair our ability to continuously innovate to meet the industry inflections, and may result in a loss of or a substantial decrease in purchases by our customers.

 

Even if the Ultratech merger is consummated, we may not be able to successfully integrate the business of Ultratech with our own or realize the anticipated benefits of the merger.

 

The merger involves the combination of two companies that currently operate as independent public companies. The combined company will be required to devote significant management attention and resources to integrating our business practices with those of Ultratech. Potential difficulties that the combined company may encounter as part of the integration process include the following:

 

·                 the inability to successfully combine our business with Ultratech in a manner that permits the combined company to achieve the full revenue and cost synergies and other benefits anticipated to result from the merger;

 

·                 the loss of customers and strategic partners who may not wish to continue their relationships with the combined company;

 

·                 required regulatory approvals from governmental entities may result in limitations, additional costs or placement of restrictions on the conduct of the combined company, imposition of additional material costs on or materially limiting the revenues of the combined company following the merger;

 

·                 complexities associated with managing the combined businesses, including difficulty addressing possible differences in corporate cultures and management philosophies and the challenge of integrating complex systems, technology, networks and other assets of each of the companies in a seamless manner that minimizes any adverse impact on customers, suppliers, employees and other business partners; and

 

·                 potential unknown liabilities and unforeseen increased expenses or delays associated with the merger.

 

23



Table of Contents

 

In addition, we have operated and, until the completion of the merger will continue to operate, independently. It is possible that the integration process could result in the diversion of the attention of our management and the disruption of, or the loss of momentum in, our ongoing business. These and other factors could adversely affect our ability to maintain relationships with customers, suppliers, employees and other partners, and our ability to achieve the anticipated benefits of the merger.

 

Item 1B. Unresolved Staff Comments

 

None.

 

Item 2. Properties

 

Our corporate headquarters and principal research and development, manufacturing, and sales and service facilities are:

 

 

 

Approximate

 

 

 

 

Owned Facilities Location

 

Size (sq. ft.)

 

Mortgaged

 

Use

Plainview, NY

 

80,000

 

No

 

Corporate Headquarters; R&D; Manufacturing; Sales & Service

Somerset, NJ

 

80,000

 

No

 

R&D; Manufacturing; Sales & Service; Administration

St. Paul, MN (1)

 

75,000

 

Yes

 

Building for sale

St. Paul, MN (1)

 

43,000

 

Yes

 

R&D; Manufacturing; Sales & Service; Administration

Somerset, NJ

 

38,000

 

No

 

R&D; Sales & Service; Administration

 

(1) We consolidated our business into one building, leaving the adjacent building for sale.

 

 

 

Approximate

 

Lease

 

 

Leased Facilities Location

 

Size (sq. ft.)

 

Expires

 

Use

Kingston, NY (2)

 

62,000

 

2018

 

Manufacturing

Somerset, NJ

 

57,000

 

2020

 

Warehouse

Horsham, PA

 

48,900

 

2024

 

R&D; Manufacturing; Sales & Service; Administration

Fremont, CA

 

25,000

 

2018

 

Sales & Service

Hillsborough, NJ (2)

 

14,000

 

2017

 

Warehouse

Hsinchu City, Taiwan

 

13,000

 

2020

 

Sales & Service; Administration

Shanghai, China

 

9,900

 

2017

 

Sales & Service; Administration

 

(2) Currently in the process of consolidating manufacturing sites and expect to vacate these locations during 2017.

 

In addition to the above, we lease a small office in Edina, Minnesota for sales and service and our foreign sales and service subsidiaries lease office space in Germany, Malaysia, Philippines, Singapore, South Korea, Thailand, and United Kingdom. We believe our facilities are adequate to meet our current needs.

 

Item 3. Legal Proceedings

 

Veeco and certain other parties were named as defendants in a lawsuit filed on April 25, 2013 in the Superior Court of California, County of Sonoma. The plaintiff in the lawsuit, Patrick Colbus, sought unspecified damages and asserted claims that he suffered burns and other injuries while cleaning a molecular beam epitaxy system alleged to have been manufactured by Veeco. The lawsuit alleged, among other things, that the molecular beam epitaxy system was defective and that Veeco failed to adequately warn of the potential risks of the system. In April 2016, the parties settled the lawsuit, without any admission of wrongdoing. The settlement amount was fully covered by Veeco’s insurance.

 

We are involved in various other legal proceedings arising in the normal course of our business. We do not believe that the ultimate resolution of these matters will have a material adverse effect on our consolidated financial position, results of operations, or cash flows.

 

Item 4. Mine Safety Disclosures

 

Not Applicable.

 

24



Table of Contents

 

PART II

 

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

 

Our common stock is quoted on The NASDAQ Stock Market under the symbol “VECO.” The 2016 and 2015 high and low closing bid prices by quarter are as follows:

 

 

 

2016

 

2015

 

 

 

High

 

Low

 

High

 

Low

 

First Quarter

 

  $

20.64

 

  $

16.89

 

  $

35.12

 

  $

29.12

 

Second Quarter

 

19.72

 

15.79

 

31.89

 

28.25

 

Third Quarter

 

20.98

 

15.91

 

28.88

 

20.41

 

Fourth Quarter

 

29.95

 

19.75

 

21.83

 

18.02

 

 

On February 14, 2017, the closing price for our common stock on The NASDAQ Stock Market was $26.35, and we had 83 shareholders of record.

 

We have not paid dividends on our common stock. The Board of Directors will determine future dividend policy based on our consolidated results of operations, financial condition, capital requirements, and other circumstances.

 

Issuer Purchases of Equity Securities

 

On October 28, 2015, our Board of Directors authorized a program to repurchase up to $100 million of our common stock to be completed through October 28, 2017. We did not repurchase any shares during the fourth quarter of 2016. At December 31, 2016, $22.3 million of the $100 million had been utilized. Repurchases are expected to be made from time to time on the open market or in privately negotiated transactions in accordance with applicable federal securities laws. The timing and amount of future repurchases, if any, will depend upon market conditions, SEC regulations, and other factors. The repurchases would be funded using available cash balances and cash generated from operations. The program does not obligate us to acquire any particular amount of common stock and may be modified or suspended at any time at our discretion.

 

25



Table of Contents

 

Stock Performance Graph

 

 

*$100 invested on 12/31/11 in stock or index, including reinvestment of dividends. Fiscal year ending December 31.

 

Copyright©2017 Standard & Poor’s, a division of S&P Global. All rights reserved.

 

ASSUMES $100 INVESTED ON DEC. 31, 2011

ASSUMES DIVIDENDS REINVESTED

FISCAL YEAR ENDING DEC. 31

 

 

 

2011

 

2012

 

2013

 

2014

 

2015

 

2016

 

Veeco Instruments Inc.

 

100.00

 

141.78

 

158.22

 

167.69

 

98.85

 

140.14

 

S&P Smallcap 600

 

100.00

 

116.33

 

164.38

 

173.84

 

170.41

 

215.67

 

RDG MidCap Technology

 

100.00

 

102.28

 

160.01

 

149.09

 

138.27

 

138.23

 

 

26



Table of Contents

 

Item 6. Selected Financial Data

 

The information set forth below should be read in conjunction with the “Results of Operations” section included in Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations.”

 

 

 

Year ended December 31,

 

 

2016(1)

 

2015(1)

 

2014(1)

 

2013

 

2012(2)

 

 

(in thousands, except per share data)

Statement of Operations Data:

 

 

 

 

 

 

 

 

 

 

Net sales

 

  $

332,451 

 

  $

477,038 

 

  $

392,873 

 

  $

331,749 

 

  $

516,020

Operating income (loss)

 

(120,402)

 

(23,232)

 

(79,209)

 

(71,812)

 

37,212

Income (loss) from continuing operations, net of tax

 

(122,210)

 

(31,978)

 

(66,940)

 

(42,263)

 

26,529

Basic income (loss) per common share from continuing operations

 

(3.11)

 

(0.80)

 

(1.70)

 

(1.09)

 

0.69

Diluted income (loss) per common share from continuing operations

 

(3.11)

 

(0.80)

 

(1.70)

 

(1.09)

 

0.68

(1) During the fourth quarter of 2014, the Company acquired PSP. The results of operations of PSP have been included in the consolidated financial statements since that date. Refer to Note 5, “Business Combinations,” for additional information.

 

 

 

 

 

 

 

 

 

 

(2) Information presented for 2012 excludes the results of our discontinued operations.

 

 

 

 

 

 

 

 

 

 

 

 

 

December 31,

 

 

2016

 

2015

 

2014

 

2013

 

2012

 

 

(in thousands)

Balance Sheet Data:

 

 

 

 

 

 

 

 

 

 

Cash and cash equivalents

 

  $

277,444

 

  $

269,232

 

  $

270,811

 

  $

210,799

 

  $

384,557

Short-term investments

 

66,787

 

116,050

 

120,572

 

281,538

 

192,234

Working capital

 

357,999

 

379,904

 

387,254

 

485,452

 

632,197

Total assets

 

758,532

 

890,789

 

929,455

 

947,969

 

937,304

Long-term debt (less current installments)

 

826

 

1,193

 

1,533

 

1,847

 

2,138

Total equity

 

594,595

 

714,615

 

738,932

 

780,230

 

811,212

 

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

 

Executive Summary

 

We design, manufacture, and market thin film process equipment aligned to meet the demands of key global trends such as energy conservation, mobility, and the ‘internet of things.’ Our equipment is primarily used to make components for electronic devices including LEDs, displays, power electronics, wireless devices, smartphones, MEMS, and HDDs. We develop highly differentiated equipment for critical performance steps in thin film processing. Our products provide leading technology at low cost-of-ownership and high volume productivity. Core competencies in advanced thin film technologies, patent protection, and decades of specialized process know-how help us stay at the forefront of these rapidly advancing markets.

 

Our portfolio of technology solutions sell into four key market areas: Lighting, Display & Power Electronics; Advanced Packaging, MEMS & RF; Scientific & Industrial; and Data Storage.

 

A majority of our sales in Lighting, Display & Power Electronics were derived from customers who manufacture LEDs. Demand for LED manufacturing equipment fluctuates quarter-to-quarter depending on various factors, including but not limited to macroeconomic conditions, customer utilization rates, demand for TVs and smartphones, and the rate of LED adoption for general lighting. Starting in the second half of 2015, weak LED demand for TV backlighting adversely impacted sales of our MOCVD equipment. TV demand began to improve in 2016, particularly for larger sized panels, which require more LEDs to backlight compared with smaller panel sizes. At the same time, we have seen an increase in LED demand for fine-pitch digital signage. These trends have led to increased demand for our MOCVD equipment and build-up

 

27



Table of Contents

 

in our MOCVD backlog. While we have limited long-term visibility, we believe these trends are positive for MOCVD demand in the near term. Our broad portfolio of MOCVD technologies has been developed to support the most significant industry trends, including developing mid-power LEDs, utilizing larger wafer sizes, and optimizing cost-of-ownership. Our TurboDisc® EPIK700 GaN MOCVD system continues to win new business for blue LEDs. Our TurboDisc K475i AsP MOCVD system targets red-orange-yellow LEDs, laser diodes, and high-efficiency triple junction photovoltaic solar cells and continues to gain market momentum.

 

Sales into the Advanced Packaging, MEMS & RF market improved by 10% in 2016, supported by our expansion efforts in the Advanced Packaging space with our PSP product family. We continue to build positive momentum in this growing market and received orders from multiple new customers including a leading Asian OSAT supplier and a leading North American IDM. We expect to benefit as these customers invest in production capacity over the near to mid-term. Our versatile PSP product architecture is well suited for a multitude of advanced packaging process schemes, including WLFO (wafer level fan out) and 3D TSV (thru silicon via) applications.

 

Sales from Scientific & Industrial and Data Storage markets are generated primarily from our legacy products, which include our ion beam etch, ion beam deposition, and MBE product families. While equipment demand from each individual market may fluctuate quarter to quarter, the diverse customer base has historically provided a relatively stable revenue stream for the company on a combined basis. In 2016, increased demand for Industrial applications such as high-power laser diodes and advanced optical coatings offset softer demand from the Data Storage market for HDD capacity.

 

Agreement to Acquire Ultratech

 

On February 2, 2017, Veeco and Ultratech, Inc. (“Ultratech”), a leading supplier of lithography, laser-processing, and inspection systems used to manufacture semiconductor devices and LEDs, signed a definitive agreement for Veeco to acquire Ultratech. The Boards of Directors of both Veeco and Ultratech have unanimously approved the transaction.

 

Ultratech shareholders will receive (i) $21.75 per share in cash and (ii) 0.2675 of a share of Veeco common stock for each Ultratech common share outstanding. Based on Veeco’s closing stock price on February 1, 2017, the transaction consideration is valued at approximately $28.64 per Ultratech share. The implied total transaction value is approximately $815 million and the implied enterprise value is approximately $550 million, net of Ultratech’s net cash balance as of December 31, 2016. The transaction is expected to close in the second calendar quarter of 2017, subject to approval by Ultratech shareholders, regulatory approvals in the United States, and other customary closing conditions.

 

Results of Operations

 

Years Ended December 31, 2016 and 2015

 

The following table presents revenue and expense line items reported in our Consolidated Statements of Operations for 2016 and 2015 and the period-over-period dollar and percentage changes for those line items. Our results of operations are reported as one business segment, represented by our single operating segment.

 

28



Table of Contents

 

 

 

 

For the year ended December 31,

 

 

Change

 

 

 

 

2016

 

 

2015

 

 

Period to Period

 

 

 

 

(dollars in thousands)

 

Net sales

 

 

$

332,451

 

100.0

%

$

477,038

 

100.0

%

$

(144,587

)

(30

)%

Cost of sales

 

 

199,593

 

60.0

%

299,797

 

62.8

%

(100,204

)

(33

)%

Gross profit

 

 

132,858

 

40.0

%

177,241

 

37.2

%

(44,383

)

(25

)%

Operating expenses, net:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Research and development

 

 

81,016

 

24.4

%

78,543

 

16.5

%

2,473

 

3

%

Selling, general, and administrative

 

 

77,642

 

23.4

%

90,188

 

18.9

%

(12,546

)

(14

)%

Amortization of intangible assets

 

 

19,219

 

5.8

%

27,634

 

5.8

%

(8,415

)

(30

)%

Restructuring

 

 

5,640

 

1.7

%

4,679

 

1.0

%

961

 

21

%

Asset impairment

 

 

69,520

 

20.9

%

126

 

0.0

%

69,394

 

*

 

Other, net

 

 

223

 

0.1

%

(697

)

(0.1

)%

920

 

*

 

Total operating expenses, net

 

 

253,260

 

76.2

%

200,473

 

42.0

%

52,787

 

26

%

Operating income (loss)

 

 

(120,402

)

(36.2

)%

(23,232

)

(4.9

)%

(97,170

)

*

 

Interest income (expense), net

 

 

958

 

0.3

%

586

 

0.1

%

372

 

63

%

Income (loss) before income taxes

 

 

(119,444

)

(35.9

)%

(22,646

)

(4.7

)%

(96,798

)

*

 

Income tax expense (benefit)

 

 

2,766

 

0.8

%

9,332

 

2.0

%

(6,566

)

70

%

Income (loss) from continuing operations

 

 

$

(122,210

)

(36.8

)%

$

(31,978

)

(6.7

)%

$

(90,232

)

*

 

 

* Not Meaningful

 

Net Sales

 

The following is an analysis of sales by market and by region:

 

 

 

 

For the year ended December 31,

 

 

Change

 

 

 

 

2016

 

 

2015

 

 

Period to Period

 

 

 

 

(dollars in thousands)

 

Market Analysis

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Lighting, Display & Power Electronics

 

 

$

136,247

 

41.0

%

$

291,133

 

61.0

%

$

(154,886

)

(53.2

)%

Advanced Packaging, MEMS & RF

 

 

68,304

 

20.5

%

61,935

 

13.0

%

6,369

 

10.3

%

Scientific & Industrial

 

 

74,913

 

22.5

%

64,297

 

13.5

%

10,616

 

16.5

%

Data Storage

 

 

52,987

 

16.0

%

59,673

 

12.5

%

(6,686

)

(11.2

)%

Total Sales

 

 

$

332,451

 

100.0

%

$

477,038

 

100.0

%

$

(144,587

)

(30.3

)%

Regional Analysis

 

 

 

 

 

 

 

 

 

 

 

 

 

 

United States

 

 

$

85,637

 

25.8

%

$

86,627

 

18.2

%

$

(990

)

(1.1

)%

China

 

 

85,834

 

25.8

%

242,442

 

50.8

%

(156,608

)

(64.6

)%

EMEA

 

 

83,410

 

25.1

%

64,019

 

13.4

%

19,391

 

30.3

%

Rest of World

 

 

77,570

 

23.3

%

83,950

 

17.6

%

(6,380

)

(7.6

)%

Total Sales

 

 

$

332,451

 

100.0

%

$

477,038

 

100.0

%

$

(144,587

)

(30.3

)%

 

Total sales decreased in 2016 from 2015 primarily due to reduced sales in Lighting, Display & Power Electronics driven by an oversupply of LED units in the market. The decrease was partially offset by increased sales in the Scientific & Industrial and Advanced Packaging, MEMS & RF markets. Pricing was not a significant driver of the change in total sales. By geography, sales decreased in all regions, except EMEA. The largest sales decline was in China, which was attributable to the decline in Lighting, Display & Power Electronics. We expect there will continue to be year-to-year variations in our future sales distribution across markets and geographies.

 

Between 2016 and 2015, orders decreased $10.2 million, or 3%, to $374.2 million. The decrease in orders was primarily attributable to a 43% decrease in orders in Advanced Packaging, MEMS & RF as well as a 27% decrease in Data Storage. These decreases were offset by increases in Lighting, Display & Power Electronics and Scientific & Industrial. In the second half of 2016, we saw some improvements in LED industry conditions. While there may continue to be year-to-year variations, we also expect Data Storage demand to generally be weak as customers make limited technology purchases.

 

29



Table of Contents

 

One of the performance measures we use as a leading indicator of the business is the book-to-bill ratio. The ratio is defined as orders recorded in a given period divided by revenue recognized in the same period. A ratio greater than one indicates we are adding orders faster than we are recognizing revenue. In 2016, the ratio was 1.1, a rise compared to 2015, when it was 0.8. Our backlog at December 31, 2016 was $209.2 million, which was higher than the ending backlog at December 31, 2015 of $186.0 million. During the year ended December 31, 2016, we recorded backlog adjustments of approximately $17.9 million primarily relating to a partial cancellation of a prior period customer order. For certain sales arrangements, we require a deposit for a portion of the sales price prior to manufacturing a system for a customer. At December 31, 2016 and 2015, we had customer deposits of $22.2 million and $28.2 million, respectively.

 

Gross Profit

 

Gross profit decreased compared to 2015 due to sharp decline in sales volume partially offset by improved gross margins. Gross margins increased despite the decline in overall sales volume principally due to favorable product and region mix of sales in the period and from the benefits associated with ongoing cost reduction activities.

 

Research and development

 

The markets we serve are characterized by continuous technological development and product innovation, and we invest in various research and development initiatives to maintain our competitive advantage and achieve our growth objectives. R&D expenses increased in 2016 compared to 2015 as a result of a reduction in external funding used to offset the cost of R&D activities, as well as the additional use of third party contractors to accelerate the development of products for the Lighting, Display & Power Electronics market. We also incurred increased depreciation of research and development-related property, plant, and equipment. These increases were partially offset by decreased personnel-related incentive compensation. We expect our research and development expenses to decline in the future as a result of our decision to significantly reduce investments in our Atomic Layer Deposition (“ALD”) technology.

 

Selling, general, and administrative

 

Selling, general, and administrative expenses decreased primarily due to reductions in sales commissions, and incentive compensation as a result of the decline in our financial performance as well as a decrease in personnel-related expenses as a result of our initiative to streamline operations, enhance efficiency, and reduce costs in response to market conditions.

 

Amortization expense

 

The decrease in amortization expense is a result of the impairment of the ALD technology asset as well as certain other intangible assets becoming fully amortized during the year, including the backlog and trademark/tradename assets associated with the December 2014 PSP acquisition.

 

Restructuring expense

 

During 2016, additional accruals were recognized and payments made related to previous years’ restructuring initiatives. In addition, during 2016, we undertook additional restructuring activities as part of our initiative to streamline operations, enhance efficiency, and reduce costs. We also significantly reduced investments in our ALD technology development. As a result of these actions, we notified approximately 75 employees of their termination and recorded restructuring charges related to these actions of $5.6 million, consisting of $4.5 million of personnel severance and related costs and $1.1 million of facility closing costs. Over the next year, we expect to incur additional restructuring costs of $2 million to $5 million as we finalize these activities.

 

Asset impairment

 

During 2016 we recorded non-cash asset impairment charges of $57.6 million as a result of our decision to significantly reduce future investments in our ALD technology development, primarily all of which related to the impairment of the intangible ALD technology asset. In addition, we recorded net non-cash impairment charges of approximately $5.7 million related to assets held for sale. We also recorded a non-cash impairment charge of $6.2 million related to the

 

30



Table of Contents

 

disposition of lab equipment that was no longer required.

 

Income Taxes

 

The 2016 income tax expense is comprised of three components: (i) $1.9 million related primarily to U.S. tax amortization of our indefinite-lived intangible assets that is not available to offset existing deferred tax assets and related valuation allowance as well as state and local income taxes, (ii) a $0.4 million tax benefit associated with the termination of the pension plan, and (iii) $1.3 million in net tax expense related primarily to our profitable foreign operations. The 2015 income tax expense is comprised of two components: (i) $1.8 million related primarily to U.S. tax amortization of our indefinite-lived intangible assets that is not available to offset existing deferred tax assets and related valuation allowance and state and local income taxes and (ii) $7.5 million in tax expense relating to our profitable foreign operations. Our 2016 and 2015 effective tax rate is different than the statutory rate primarily due to our inability to recognize our U.S. deferred tax assets on a more-likely-than-not basis with respect to the pre-tax U.S. operating losses in those years.

 

Years Ended December 31, 2015 and 2014

 

The following table presents revenue and expense line items reported in our Consolidated Statements of Operations for 2015 and 2014 and the period-over-period dollar and percentage changes for those line items. Our results of operations are reported as one business segment, represented by our single operating segment.

 

 

 

For the year ended December 31,

 

Change

 

 

 

2015

 

2014

 

Period to Period

 

 

 

(dollars in thousands)

 

Net sales

 

$

477,038

 

100.0%

 

$

392,873

 

100.0%

 

$

84,165

 

21.4%

 

Cost of sales

 

299,797

 

62.8%

 

257,991

 

65.7%

 

41,806

 

16.2%

 

Gross profit

 

177,241

 

37.2%

 

134,882

 

34.3%

 

42,359

 

31.4%

 

Operating expenses, net:

 

 

 

 

 

 

 

 

 

 

 

 

 

Research and development

 

78,543

 

16.5%

 

81,171

 

20.7%

 

(2,628

)

(3.2)%

 

Selling, general and administrative

 

90,188

 

18.9%

 

89,760

 

22.8%

 

428

 

0.5%

 

Amortization of intangible assets

 

27,634

 

5.8%

 

13,146

 

3.3%

 

14,488

 

110.2%

 

Restructuring

 

4,679

 

1.0%

 

4,394

 

1.1%

 

285

 

6.5%

 

Asset impairment

 

126

 

0.0%

 

58,170

 

14.8%

 

(58,044

)

*  

 

Changes in contingent consideration

 

 

0.0%

 

(29,368

)

(7.5)%

 

29,368

 

*  

 

Other, net

 

(697

)

(0.1)%

 

(3,182

)

(0.8)%

 

2,485

 

78.1%

 

Total operating expenses, net

 

200,473

 

42.0%

 

214,091

 

54.5%

 

(13,618

)

(6.4)%

 

Operating income (loss)

 

(23,232

)

(4.9)%

 

(79,209

)

(20.2)%

 

55,977

 

70.7%

 

Interest income, net

 

586

 

0.1%

 

855

 

0.2%

 

(269

)

(31.5)%

 

Income (loss) before income taxes

 

(22,646

)

(4.7)%

 

(78,354

)

(19.9)%

 

55,708

 

71.1%

 

Income tax expense (benefit)

 

9,332

 

2.0%

 

(11,414

)

(2.9)%

 

20,746

 

*   

 

Net income (loss)

 

$

(31,978

)

(6.7)%

 

$

(66,940

)

(17.0)%

 

$

34,962

 

52.2%

 

 

* Not meaningful

 

31



Table of Contents

 

Net Sales

 

The following is an analysis of sales by market and by region:

 

 

 

For the year ended December 31,

 

Change

 

 

 

2015

 

2014

 

Period to Period

 

 

 

(dollars in thousands)

 

Market Analysis

 

 

 

 

 

 

 

 

 

 

 

 

 

Lighting, Display & Power Electronics

 

$

291,133

 

61.0%

 

$

278,551

 

70.9%

 

$

12,582

 

4.5%

 

Advanced Packaging, MEMS & RF

 

61,935

 

13.0%

 

11,449

 

2.9%

 

50,486

 

441.0%

 

Scientific & Industrial

 

64,297

 

13.5%

 

44,429

 

11.3%

 

19,868

 

44.7%

 

Data Storage

 

59,673

 

12.5%

 

58,444

 

14.9%

 

1,229

 

2.1%

 

Total Sales

 

$

477,038

 

100.0%

 

$

392,873

 

100.0%

 

$

84,165

 

21.4%

 

Regional Analysis

 

 

 

 

 

 

 

 

 

 

 

 

 

United States

 

$

86,627

 

18.2%

 

$

44,060

 

11.2%

 

$

42,567

 

96.6%

 

China

 

242,442

 

50.8%

 

159,063

 

40.5%

 

83,379

 

52.4%

 

EMEA

 

64,019

 

13.4%

 

35,644

 

9.1%

 

28,375

 

79.6%

 

Rest of World

 

83,950

 

17.6%

 

154,106

 

39.2%

 

(70,156

)

(45.5)%

 

Total Sales

 

$

477,038

 

100.0%

 

$

392,873

 

100.0%

 

$

84,165

 

21.4%

 

 

Total sales increased in 2015 from 2014 primarily due to an increase in the Advanced Packaging, MEMS & RF market which was primarily attributed to the PSP business acquired in December 2014. Sales increases were also realized in the other three markets. Pricing was not a significant driver of the change in total sales. By region, sales increased in China, EMEA, and the United States, partially offset by declines in Rest of World, principally in South Korea.

 

Between 2015 and 2014, orders decreased $125.6 million, or 25%, to $384.4 million. The decrease is primarily attributable to a 57% decrease in orders in Lighting, Display & Power Electronics as well as a 31% decrease in Data Storage. The pronounced decline in orders and the corresponding drawdown on backlog was driven by weakness in the LED market, which was due to lower demand for LED TV display backlighting and an economic slowdown in China. As a result, LED manufacturers delayed their MOCVD equipment investments, which impacted our full year orders in the Lighting, Display & Power Electronics market.

 

In 2015, the book-to-bill ratio was 0.8, a reduction compared to 2014, when it was 1.3. Our backlog at December 31, 2015 was $186.0 million, which was lower than the ending backlog at December 31, 2014 of $286.7 million. During the year ended December 31, 2015, we recorded backlog adjustments of approximately $7.7 million relating to orders that no longer met our bookings criteria.

 

Gross Profit

 

Gross margins increased from the prior year primarily due to our acquisition of PSP in 2015, which contributed to an increase in sales volume and an improved product mix, as well as negatively impacting 2014 gross margin for an inventory fair value step-up that was recorded in connection with the purchase accounting. Products sold into our Scientific & Industrial markets improved margins as well. Finally, $4.6 million of customer deposits were forfeited and recognized into revenue and gross profit in 2015, favorably impacting gross margin.

 

Selling, general, and administrative

 

Selling, general, and administrative expenses remained relatively consistent in 2015 as compared to 2014. Increases related to a full year of expenses associated with our PSP business which was acquired in December of 2014 were offset by decreases in third party professional fees and personnel related expenses.

 

Research and development

 

We focus our research and development on areas we anticipate to be high-growth. Research and development expenses

 

32



Table of Contents

 

decreased due to reductions in personnel-related expenses largely related to the 2015 restructuring, which included closing the Hyeongok-ri, South Korea facility and reducing the workforce, including 23 employees whose positions were eliminated. We also continue to selectively fund product development activities, which has resulted in reductions in spending for project materials, and, in 2015, we received a small amount of research and development funding from a collaborative arrangement. These reductions were partially offset by an increase in spending as a result of a full year of expenses associated with our PSP business.

 

Amortization expense

 

The increase in amortization expense is related to the $79.8 million in amortizable intangible assets acquired as part of our acquisition of PSP in December 2014.

 

Restructuring expense

 

In 2015, we announced the closing of our Hyeongok-ri, South Korea facility and reduced the workforce, including 23 employees whose positions were eliminated, resulting in additional restructuring costs. And in an effort to better align our cost structure with the recently observed weakness in the LED market, we reduced spending primarily through the reduction of 16 employees and 12 temporary staff toward the end of 2015. During 2014, we announced the closing of our Ft. Collins, Colorado and Camarillo, California facilities. Business activities formerly conducted at these sites have been transferred to our Plainview, New York facility.

 

Asset impairment

 

Limited asset impairment charges were observed in 2015. During 2014, based on a combination of factors, including our determination that incumbent deposition technology for flexible OLED display encapsulation had progressed to satisfy current market requirements, we believed that there were sufficient indicators that required an interim asset impairment analysis on our Atomic Layer Deposition (“ALD”) business. As a result of our analysis, we recorded non-cash impairment charges of $28.0 million related to goodwill and $25.9 million related to other long-lived assets, including $17.4 million related to customer relationships, $4.8 million related to in-process research and development, and $3.6 million related to certain tangible assets. In addition, during 2014, we recognized $4.3 million of asset impairments on tangible assets held for sale, including certain lab tools and a vacant building and land.

 

Changes in Contingent Consideration

 

Included in our agreement to acquire ALD in the fourth quarter of 2013 were performance milestones that could trigger contingent payments to the original selling shareholders. During the year ended December 31, 2013, the first milestone was achieved, and we paid the former shareholders $5.0 million and increased the estimated fair value of the remaining contingent payments by $0.8 million. During 2014, we determined that all of the remaining performance milestones were not met, reversed the fair value of the liability, and recorded a non-cash gain of $29.4 million.

 

Other, net

 

During 2014, we completed our plan to liquidate our subsidiary in Japan, since we moved to a distributor model to serve our customers in that region. As a result of the liquidation, we reclassified a cumulative translation gain of $3.1 million from Other Comprehensive Income to “Other, net” on the Consolidated Statements of Operations.

 

Income Taxes

 

The 2015 income tax expense is comprised of two components: (i) $1.8 million related primarily to U.S. tax amortization of the our indefinite-lived intangible assets that is not available to offset existing deferred tax assets and related valuation allowance as well as state and local income taxes and (ii) $7.5 million in tax expense relating to our profitable non-U.S. operations. The 2014 income tax benefit included $13.4 million in tax benefits relating to our U.S. operations offset by $2.0 million in tax expense relating to our non-U.S. operations. Our 2015 effective tax rate is different than the statutory rate primarily due to our inability to recognize our U.S. deferred tax assets on a more-likely-than-not basis with respect to current year pre-tax U.S. operating losses. Our 2014 effective tax rate is lower than the statutory rate primarily related to a

 

33



Table of Contents

 

$4.9 million tax benefit associated with our successful negotiation of an incentive tax rate in one of our non-U.S. subsidiaries, a $2.3 million reversal of uncertain tax positions as a result of concluding the 2010 IRS examination, and the recognition of only a portion of our U.S. deferred tax assets on a more-likely-than-not basis with respect to current year pre-tax operating losses. We maintain a valuation allowance on our U.S. deferred tax assets.

 

Liquidity and Capital Resources

 

Our cash and cash equivalents, short-term investments, and restricted cash are as follows:

 

 

 

 

December 31,

 

 

 

 

2016

 

 

 

2015

 

 

 

(in thousands)

 

Cash and cash equivalents

 

$

277,444

 

$

269,232

 

Short-term investments

 

66,787

 

116,050

 

Total

 

$

344,231

 

$

385,282

 

 

A portion of our cash and cash equivalents is held by our subsidiaries throughout the world, frequently in each subsidiary’s respective functional currency, which is typically the U.S. dollar. At December 31, 2016 and 2015, cash and cash equivalents of $149.2 million and $135.3 million, respectively, were held outside the United States. In order to fund continued international growth, it is our current intention to permanently reinvest the cash and cash equivalent balances held in China, Taiwan, and Malaysia, and our current forecasts do not require repatriation of these funds back to the United States. At December 31, 2016, we had $80.2 million in cash held outside the United States on which we may have to pay significant U.S. income taxes to repatriate. Additionally, local government regulations may restrict our ability to move cash balances under certain circumstances. We currently do not expect such regulations and restrictions to impact our ability to make acquisitions, pay vendors, or conduct operations. We believe that our projected cash flow from operations, combined with our cash and short term investments, will be sufficient to meet our projected working capital requirements, contractual obligations, and other cash flow needs for the next twelve months, including scheduled interest payments on our Convertible Notes issued in January 2017.

 

A summary of the cash flow activity for the year ended December 31, 2016 and 2015 is as follows:

 

Cash Flows from Operating Activities

 

 

 

 

For the year ended December 31,

 

 

 

 

2016

 

 

 

2015

 

 

 

(in thousands)

 

Net income (loss)

 

$

(122,210

)

$

(31,978

)

Non-cash items:

 

 

 

 

 

Depreciation and amortization

 

32,650

 

39,850

 

Deferred income taxes

 

940

 

2,648

 

Share-based compensation expense

 

15,741

 

17,986

 

Asset impairment

 

69,520

 

126

 

Other

 

(259

)

(1,218

)

Changes in operating assets and liabilities

 

(20,226

)

(11,625

)

Net cash provided by (used in) operating activities

 

$

(23,844

)

$

15,789

 

 

Net cash used in operating activities was $23.8 million in 2016 and was due to the net loss of $122.2 million plus a decline in cash flow from operating activities due to changes in operating assets and liabilities of $20.2 million, partially offset by adjustments for non-cash items of $118.6 million. The changes in operating assets and liabilities was largely attributable to a decrease in accounts payable and accrued expenses, an increase in accounts receivable, and an increase in inventories and deferred cost of sales, partially offset by a decrease in prepaid expenses and other current assets and an increase in customer deposits and deferred revenue.

 

Net cash provided by operating activities was $15.8 million in 2015 and was due to the net loss of $32.0 million plus

 

34



Table of Contents

 

adjustments for non-cash items of $59.4 million, offset by a decline in cash flow from operating activities due to changes in operating assets and liabilities of $11.6 million. The changes in operating assets and liabilities was largely attributable to an increase in inventory and a decrease in customer deposits and deferred revenue, offset by a decrease in accounts receivable and an increase in accounts payable and accrued expenses.

 

Cash Flows from Investing Activities

 

 

 

 

For the year ended December 31,

 

 

 

 

2016

 

 

 

2015

 

 

 

 

(in thousands)

 

Acquisitions of businesses, net of cash acquired

 

 

$

 

 

 

$

(68

)

Capital expenditures

 

 

(11,479

)

 

 

(13,887

)

Changes in investments, net

 

 

48,907

 

 

 

4,403

 

Proceeds from sale of property, plant, and equipment

 

 

9,512

 

 

 

 

Proceeds from sale of lab tools

 

 

 

 

 

3,068

 

Other

 

 

(230

)

 

 

(594

)

Net cash provided by (used in) investing activities

 

 

$

46,710

 

 

 

$

(7,078

)

 

The cash provided by investing activities in 2016 was primarily attributable to net changes in investments and sales of property, plant, and equipment, partially offset by capital expenditures. The cash used by investing activities in 2015 was primarily attributable to capital expenditures, partially offset by net sales of marketable securities and sales of lab tools. As part of our efforts to streamline operations, enhance efficiency, and reduce costs, we are making certain investments in our facilities to support the consolidation activities, and, in 2017, we expect to incur capital expenditures related to these activities of $9 million to $11 million above our annual average capital spending.

 

Cash Flows from Financing Activities

 

 

 

 

For the year ended December 31,

 

 

 

 

2016

 

 

 

2015

 

 

 

(in thousands)

 

Settlement of equity awards, net of withholding taxes

 

$

(945

)

$

(982

)

Purchases of common stock

 

(13,349

)

(8,907

)

Repayments of long-term debt

 

(340

)

(314

)

Net cash used in financing activities

 

$

(14,634

)

$

(10,203

)

 

The cash used in financing activities for both 2016 and 2015 was primarily related to the share repurchase program, which commenced in November 2015.

 

Contractual Obligations and Commitments

 

We have commitments under certain contractual arrangements to make future payments for goods and services. These contractual arrangements secure the rights to various assets and services to be used in the future in the normal course of business. We expect to fund these contractual arrangements with cash generated from operations in the normal course of business.

 

The following table summarizes our contractual arrangements at December 31, 2016 and the timing and effect that those commitments are expected to have on our liquidity and cash flow in future periods. The effect of unrecognized tax benefits, which total $5.4 million at December 31, 2016, have been excluded from the table since we are unable to reasonably estimate the period of potential cash settlement, if any, with the respective tax authorities.

 

35



Table of Contents

 

 

 

 

Payments due by period

 

 

 

 

 

Less than

 

1 – 3

 

3 – 5

 

More than

 

 

 

 

Total

 

1 year

 

years

 

years

 

5 years

 

 

 

(in thousands)

 

Long-term debt

 

$

1,194

 

$

368

 

$

826

 

$

 

$

 

Interest on debt

 

151

 

81

 

70

 

 

 

Operating leases

 

13,873

 

3,281

 

4,192

 

2,795

 

3,605

 

Bank guarantees

 

4,970

 

4,970

 

 

 

 

Purchase commitments(1)

 

72,627

 

72,627

 

 

 

 

Total

 

$

92,815

 

$

81,327

 

$

5,088

 

$

2,795

 

$

3,605

 

 

(1)                Purchase commitments are primarily for inventory used in manufacturing our products. We generally do not enter into purchase commitments extending beyond one year. We have $7.8 million of offsetting supplier deposits against these purchase commitments as of December 31, 2016.

 

New Convertible Notes

 

In January 2017, we issued $345.0 million in aggregate principal amount of 2.70% convertible senior unsecured notes due 2023 (the “Convertible Notes”) pursuant to an indenture dated as of January 18, 2017 between Veeco and U.S. Bank National Association, as the trustee (the “Offering”). We received net proceeds from the Offering, after deducting fees and expenses payable by us, of approximately $336.0 million. The Convertible Notes bear interest payable semiannually in arrears on January 15 and July 15 of each year, beginning on July 15, 2017. We believe that we have sufficient capital resources and cash flows from operations to support scheduled interest payments on this debt.

 

Agreement to Acquire Ultratech

 

As described above, on February 2, 2017, Veeco and Ultratech signed a definitive agreement for Veeco to acquire Ultratech. We believe that we have sufficient capital resources and cash flows from operations to support the purchase of Ultratech.

 

Off-Balance Sheet Arrangements

 

We do not have any off-balance sheet arrangements that have, or are reasonably likely to have, a current or future material effect on our financial condition, changes in financial condition, expenses, results of operations, liquidity, capital expenditures or capital resources other than operating leases, bank guarantees, and purchase commitments disclosed in the preceding “Contractual Obligations and Commitments” table.

 

Application of Critical Accounting Policies

 

Our discussion and analysis of our financial condition and results of operations are based upon our Consolidated Financial Statements, which have been prepared in accordance with accounting principles generally accepted in the United States. The preparation of these financial statements require a high degree of judgment, either in the application and interpretation of existing accounting literature or in the development of estimates that affect the reported amounts of assets, liabilities, revenues, and expenses. On an ongoing basis, we evaluate our estimates and judgments based on historical experience as well as other factors that we believe to be reasonable under the circumstances. The results of our evaluation form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. These estimates may change in the future if underlying assumptions or factors change, and actual results may differ from these estimates.

 

We consider the following significant accounting policies to be critical because of their complexity and the high degree of judgment involved in implementing them.

 

36



Table of Contents

 

Revenue Recognition

 

We recognize revenue when persuasive evidence of an arrangement exists, delivery has occurred or services have been rendered, the selling price is fixed or determinable, collectability is reasonably assured, and, for system sales, we have received customer acceptance or we have otherwise objectively demonstrated that the delivered system meets all of the agreed-to customer specifications. Each sales arrangement may contain commercial terms that differ from other arrangements. In addition, we frequently enter into contracts that contain multiple deliverables. Judgment is required to properly identify the accounting units of the multiple deliverable transactions and to determine the manner in which revenue should be allocated among the accounting units. Moreover, judgment is used in interpreting the commercial terms and determining when all criteria have been met in order to recognize revenue in the appropriate accounting period. The maximum revenue we recognize on a delivered element is limited to the amount that is not contingent upon the delivery of additional items. While changes in the allocation of the estimated sales price between the units of accounting will not affect the amount of total revenue recognized for a particular sales arrangement, any material changes in these allocations could impact the timing of revenue recognition, which could have a material effect on our financial condition and results of operations. We generally recognize revenue related to sales of components and spare parts upon shipment. We generally recognize revenue related to maintenance and service contracts ratably over the applicable contract term. See Note 1, “Significant Accounting Policies,” in the Notes to the Consolidated Financial Statements for a description of our revenue recognition policy.

 

Inventory Valuation

 

Inventories are stated at the lower of cost or net realizable value using standard costs that approximate actual costs on a first-in, first-out basis. Each quarter we assess the valuation and recoverability of all inventories: materials (raw materials, spare parts, and service inventory); work-in-process; and finished goods. Obsolete inventory or inventory in excess of our estimated usage requirements is written down to its estimated net realizable value if less than cost. We evaluate usage requirements by analyzing historical and anticipated demand, and anticipated demand is estimated based upon current economic conditions, utilization requirements related to current backlog, current sales trends, and other qualitative factors. Unanticipated changes in demand for our products may require a write down of inventory that could materially affect our operating results.

 

Warranty Costs

 

Our warranties are typically valid for one year from the date of final acceptance. We estimate the costs that may be incurred under the warranty we provide and record a liability in the amount of such costs at the time the related revenue is recognized. Estimated warranty costs are determined by analyzing specific product and historical configuration statistics and regional warranty support costs. Our warranty obligation is affected by product failure rates, material usage, and labor costs incurred in correcting product failures during the warranty period. Unforeseen component failures or exceptional component performance can also result in changes to warranty costs. If actual warranty costs differ substantially from our estimates, revisions to the estimated warranty liability would be required.

 

Goodwill and Intangible Assets

 

Goodwill is tested for impairment at least annually in the fourth quarter of our fiscal year. We may first perform a qualitative assessment of whether it is more likely than not that the reporting unit’s fair value is less than its carrying amount, and, if so, we then apply the two-step impairment test. The two-step impairment test first compares the fair value of our reporting unit to its carrying amount. If the fair value of the reporting unit exceeds its carrying amount, goodwill is not impaired and we are not required to perform further testing. If the carrying amount of the reporting unit exceeds its fair value, we determine the implied fair value of the goodwill and if the carrying amount of the goodwill exceeds its implied fair value, then we record an impairment loss equal to the difference.

 

We determine the fair value of our reporting unit based on a reconciliation of the aggregate fair value of our reporting unit to our adjusted market capitalization. The adjusted market capitalization is calculated by multiplying the average share price of our common stock for the last ten trading days prior to the measurement date by the number of outstanding common shares and adding a control premium.

 

37



Table of Contents

 

The carrying values of identifiable intangible assets are reviewed for recoverability on a quarterly basis. The facts and circumstances considered include the recoverability of the cost of other intangible assets from future undiscounted cash flows to be derived from the use of the asset or asset group. It is not possible for us to predict the likelihood of any possible future impairments or, if such an impairment were to occur, the magnitude of any impairment.

 

Intangible assets with finite useful lives, including purchased technology, customer-related intangible assets, patents, trademarks, covenants not-to-compete, and software licenses, are subject to amortization over the expected period of economic benefit to us. We evaluate whether events or circumstances have occurred that warrant a revision to the remaining useful lives of intangible assets. In cases where a revision is deemed appropriate, the remaining carrying amounts of the intangible assets are amortized over the revised remaining useful life.

 

Accounting for Business Combinations

 

The allocation of the purchase price for acquisitions requires extensive use of accounting estimates and judgments to allocate the purchase price to the identifiable tangible and intangible assets acquired, including in-process research and development and liabilities assumed based on their respective fair values. The estimates we make include expected cash flows, expected cost savings, and the appropriate weighted average cost of capital. We complete these assessments as soon as practical after the acquisition closing dates. Any excess of the purchase price over the estimated fair values of the identifiable net assets acquired is recorded as goodwill.

 

Fair Value of Financial Instruments

 

The measurement of fair value for our financial instruments is based on the authoritative guidance which establishes a fair value hierarchy that is based on three levels of inputs and requires an entity to maximize the use of observable inputs and minimize the use of unobservable inputs when measuring fair value. See Note 3, “Fair Value Measurements,” in the Notes to the Consolidated Financial Statements for additional information.

 

Income Taxes

 

We estimate our income taxes in each of the jurisdictions in which we operate. Deferred income taxes reflect the net tax effect of temporary differences between the asset and liability balances recognized for financial reporting purposes and the balances used for income tax purposes, as well as the tax effect of carry forwards. We record a valuation allowance to reduce our deferred tax assets to the amount that is more likely than not to be realized. Realization of our net deferred tax assets is dependent on future taxable income.

 

We recognize the effect of income tax positions for only those positions which are estimated to more likely than not be sustained if challenged. We reflect changes in recognition or measurement in the period in which our change in judgment occurs. We record interest and penalties related to uncertain tax positions in income tax expense.

 

Accounting for Share-Based Compensation

 

We account for share-based awards granted to employees for services based on the fair value of those awards. We use the Black-Scholes option-pricing model to compute the estimated fair value of option awards and purchase rights under the employee stock purchase plan. The Black-Scholes model includes assumptions regarding expected volatility, expected term, and risk-free interest rates. These assumptions reflect our best estimates, but these items involve uncertainties based on market and other conditions outside of our control. As a result, if other assumptions had been used, share-based compensation expense could have been materially affected. Furthermore, if different assumptions are used in future periods, share-based compensation expense could be materially affected in future years.

 

We have granted performance share awards to senior executives where the number and, in some instances, the timing of the vesting of restricted shares ultimately received by the senior executives depends on our performance, as measured against specified targets. We reevaluate the expected target achievement each reporting period until the conclusion of the performance period and recognize the impact of any change in estimate in the period of change.

 

In March 2016, the FASB issued Accounting Standards Update (“ASU”) 2016-09: Stock Compensation: Improvements to

 

38



Table of Contents

 

Employee Share-Based Payment Accounting, which simplifies several aspects of the accounting for share-based payments. We early adopted the ASU effective January 1, 2016. Beginning in 2016, excess tax benefits and deficiencies are recognized as income tax expense or benefit in the income statement in the reporting period incurred. We also made an accounting policy election to account for forfeitures when they occur. The ASU transition guidance requires that this election be applied on a modified retrospective basis through a cumulative-effect adjustment to retained earnings as of the beginning of the period in which the ASU is effective. Accordingly, we recorded a $1.3 million charge to the opening accumulated deficit balance with a corresponding adjustment to additional paid-in capital, resulting in no impact to the opening balance of total stockholders’ equity. In addition, we recorded additional deferred tax assets with an equally offsetting valuation allowance of $2.4 million.

 

Recent Accounting Pronouncements

 

The FASB issued ASU 2014-09, as amended: Revenue from Contracts with Customers, which has been codified as Accounting Standards Codification 606 (“ASC 606”). ASC 606 requires our revenue recognition to depict the transfer of promised goods or services to customers in an amount that reflects the consideration to which we expect to be entitled in exchange for those goods or services. ASC 606 outlines a five-step model to make the revenue recognition determination and requires new financial statement disclosures. Publicly-traded companies are required to adopt ASC 606 for reporting periods beginning after December 15, 2017, but can adopt early for annual periods beginning after December 15, 2016. We are still completing our evaluation of the impact of adopting this standard; however, we currently expect the most significant financial statement impacts of adopting ASC 606 will be the elimination of the constraint on revenue associated with the billing retention related to the receipt of customer final acceptance as well as the identification of installation services as a performance obligation. The elimination of the constraint on revenue related to customer final acceptance, which is usually about 10 percent of a system sale, will generally be recognized at the time we transfer control of the system to the customer, which is earlier than under our current revenue recognition model. The new performance obligation related to installation services under the new standard will generally be recognized as the installation services are performed, which is later than under our current revenue recognition model. Taken together, we currently believe there will be a net acceleration of a small percentage of our revenue under ASC 606 as compared to our current revenue recognition model. ASC 606 provides for different transition alternatives, and we are evaluating which method of adoption to select.

 

In January 2016, the FASB issued ASU 2016-01: Financial Instruments — Overall, which requires certain equity investments to be measured at fair value, with changes in fair value recognized in net income. Publicly-traded companies are required to adopt the update for reporting periods beginning after December 15, 2017; early adoption is permitted. We don’t expect this ASU will have a material impact on the consolidated financial statements.

 

In February 2016, the FASB issued ASU 2016-02: Leases, which generally requires our operating lessee rights and obligations to be recognized as assets and liabilities on the balance sheet. In addition, interest on lease liabilities is to be recognized separately from the amortization of right-of-use assets in the Statement of Operations. Further, payments of the principal portion of lease liabilities are to be classified as financing activities while payments of interest on lease liabilities and variable lease payments are to be classified as operating activities in the Statement of Cash Flows. When the standard is adopted, we will be required to recognize and measure leases at the beginning of the earliest period presented using a modified retrospective approach. ASU 2016-02 is effective for fiscal years beginning after December 15, 2018, with early application permitted. We are evaluating the anticipated impact of adopting the ASU on the consolidated financial statements.

 

In August 2016, the FASB issued ASU 2016-15, Statement of Cash Flows: Classification of Certain Cash Receipts and Cash Payments, which provides guidance on eight specific cash flow issues, including debt prepayments or debt extinguishment costs. Publicly-traded companies are required to adopt the update for reporting periods beginning after December 15, 2017. We do not expect this ASU will have a material impact on the consolidated financial statements.

 

In October 2016, the FASB issued ASU 2016-16, Income Taxes: Intra-Entity Transfers of Assets Other Than Inventory, which requires that entities recognize the income tax consequences of an intra-entity transfer of an asset, other than inventory, when the transfer occurs. Publicly-traded companies are required to adopt the update for reporting periods beginning after December 15, 2017. We are evaluating the anticipated effect the ASU will have on the consolidated financial statements.

 

39



Table of Contents

 

We are also evaluating other pronouncements recently issued but not yet adopted. The adoption of these pronouncements is not expected to have a material impact on our consolidated financial statements.

 

Item 7A. Quantitative and Qualitative Disclosures about Market Risk

 

Interest Rate Risk

 

Our exposure to market rate risk for changes in interest rates primarily relates to our investment portfolio. We centrally manage our investment portfolios considering investment opportunities and risks, tax consequences, and overall financing strategies. Our investment portfolio includes fixed-income securities with a fair value of approximately $66.8 million at December 31, 2016. These securities are subject to interest rate risk and, based on our investment portfolio at December 31, 2016, a 100 basis point increase in interest rates would result in a decrease in the fair value of the portfolio of $0.2 million. While an increase in interest rates may reduce the fair value of the investment portfolio, we will not realize the losses in the Consolidated Statements of Operations unless the individual fixed-income securities are sold prior to recovery or the loss is determined to be other-than-temporary.

 

Currency Exchange Risk

 

We conduct business on a worldwide basis and, as such, a portion of our revenues, earnings, and net investments in foreign affiliates is exposed to changes in currency exchange rates. The economic impact of currency exchange rate movements is complex because such changes are often linked to variability in real growth, inflation, interest rates, governmental actions, and other factors. These changes, if material, could cause us to adjust our financing and operating strategies. Consequently, isolating the effect of changes in currency does not incorporate these other important economic factors.

 

We have managed our risks and exposures to currency exchange rates through the use of derivative financial instruments (e.g., forward contracts). We only use derivative financial instruments in the context of hedging and do not use them for speculative purposes. During fiscal 2016, we did not designate foreign exchange derivatives as hedges. We did not enter into any derivative transactions in 2015. Accordingly, all foreign exchange derivatives are recorded in our Consolidated Balance Sheet at fair value and changes in fair value from these contracts are recorded in “Other, net” in our Consolidated Statements of Operations.

 

Our net sales to customers located outside of the United States represented approximately 74%, 82%, and 89% of our total net sales in 2016, 2015, and 2014, respectively. We expect that net sales to customers outside the United States will continue to represent a large percentage of our total net sales. Our net sales denominated in currencies other than the U.S. dollar represented approximately 4%, 2%, and 8%, of total net sales in 2016, 2015, and 2014, respectively.

 

A 10% change in foreign exchange rates would have an immaterial impact on the consolidated results of operations since most of our sales outside the United States are denominated in U.S. dollars.

 

Item 8. Financial Statements and Supplementary Data

 

Our Consolidated Financial Statements are listed in the Index to Consolidated Financial Statements and Financial Statement Schedule filed as part of this Form 10-K.

 

Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

 

None.

 

Item 9A. Controls and Procedures

 

Management’s Report on Internal Control Over Financial Reporting

 

Our principal executive and financial officers have evaluated and concluded that our disclosure controls and procedures are effective as of December 31, 2016. The disclosure controls and procedures are designed to ensure that the information

 

40



Table of Contents

 

required to be disclosed in this report filed under the Securities Exchange Act of 1934 is recorded, processed, summarized, and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms and is accumulated and communicated to our principal executive and financial officers as appropriate to allow timely decisions regarding required disclosure.

 

Our principal executive and financial officers are responsible for establishing and maintaining adequate internal control over financial reporting, which is a process designed and put into effect to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. Using the criteria established in the Internal Control — Integrated Framework (2013) published by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”), Management has evaluated, assessed, and concluded that internal control over financial reporting is effective as of December 31, 2016.

 

KPMG LLP, an independent registered public accounting firm, has audited the consolidated financial statements included in this Annual Report on Form 10-K and, as part of their audit, has issued their report, included herein, on the effectiveness of our internal control over financial reporting.

 

Changes in Internal Control Over Financial Reporting

 

During the quarter ended December 31, 2016, there were no changes in internal control that have materially affected or are reasonably likely to materially affect internal control over financial reporting.

 

41



Table of Contents

 

Report of Independent Registered Public Accounting Firm

 

The Board of Directors and Stockholders of

Veeco Instruments Inc.:

 

We have audited Veeco Instrument Inc.’s internal control over financial reporting as of December 31, 2016, based on criteria established in Internal Control — Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). Veeco Instrument Inc.’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit.

 

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audit also included performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

 

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

 

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

 

In our opinion, Veeco Instruments Inc. maintained, in all material respects, effective internal control over financial reporting as of December 31, 2016, based on criteria established in Internal Control — Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO).

 

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of Veeco Instrument’s Inc. and subsidiaries as of December 31, 2016 and 2015, and the related consolidated statements of operations, comprehensive income (loss), stockholders’ equity, and cash flows for each of the years in the two-year period ended December 31, 2016, and our report dated February 22, 2017 expressed an unqualified opinion on those consolidated financial statements.

 

 

/s/ KPMG LLP

 

Melville, New York
February 22, 2017

 

42



Table of Contents

 

Item 9B. Other Information

 

None.

 

PART III

 

Item 10. Directors, Executive Officers and Corporate Governance

 

Information required by this Item that will appear under the headings “Governance,” “Executive Officers,” and “Section 16(a) Beneficial Ownership Reporting Compliance” in the definitive proxy statement to be filed with the SEC relating to our 2017 Annual Meeting of Stockholders is incorporated herein by reference.

 

We have adopted a Code of Ethics for Senior Officers (the “Code”) which applies to our chief executive officer, principal financial officer, principal accounting officer, and persons performing similar functions. A copy of the Code can be found on our website (www.veeco.com). We intend to disclose on our website the nature of any future amendments to and waivers of the Code that apply to the chief executive officer, principal financial officer, principal accounting officer or persons performing similar functions. We have also adopted a Code of Business Conduct which applies to all of our employees, including those listed above, as well as to our directors. A copy of the Code of Business Conduct can be found on our website (www.veeco.com). The website address above is intended to be an inactive, textual reference only. None of the material on this website is part of this report.

 

Item 11. Executive Compensation

 

Information required by this Item that will appear under the heading “Compensation” in the definitive proxy statement to be filed with the SEC relating to our 2017 Annual Meeting of Stockholders is incorporated herein by reference.

 

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

 

Information required by this Item that will appear under the headings “Security Ownership of Certain Beneficial Owners and Management” and “Equity Compensation Plan Information” in the definitive proxy statement to be filed with the SEC relating to our 2017 Annual Meeting of Stockholders is incorporated herein by reference.

 

Item 13. Certain Relationships and Related Transactions, and Director Independence

 

Information required by this Item that will appear under the headings “Certain Relationships and Related Transactions” and “Independence of Board” in the definitive proxy statement to be filed with the SEC relating to our 2017 Annual Meeting of Stockholders is incorporated herein by reference.

 

Item 14. Principal Accounting Fees and Services

 

Information required by this Item that will appear under the heading “Proposal 4 — Ratification of Appointment of KPMG” in the definitive proxy statement to be filed with the SEC relating to our 2017 Annual Meeting of Stockholders is incorporated herein by reference.

 

43



Table of Contents

 

PART IV

 

Item 15. Exhibits, Financial Statement Schedules

 

(a)  (1)  The Registrant’s financial statements together with a separate table of contents are annexed hereto

(2)  Financial Statement Schedules are listed in the separate table of contents annexed hereto.

(3)  Exhibits

 

Unless otherwise indicated, each of the following exhibits has been previously filed with the Securities and Exchange Commission by the Company under File No. 0-16244.

 

 

 

 

 

 

 

 

 

 

 

Filed or

Exhibit

 

 

 

Incorporated by Reference

 

Furnished

Number

 

Exhibit Description

 

Form

 

Exhibit

 

Filing Date

 

Herewith

2.1

 

Agreement and Plan of Merger dated as of February 2, 2017 among Ultratech, Inc., Veeco Instruments Inc. and Ulysses Acquisition Subsidiary Corp.

 

8-K

 

2.1

 

2/3/2017

 

 

2.2

 

Securities Purchase Agreement, dated December 4, 2014, by and among Solid State Equipment Holdings LLC, certain securityholders thereof, Veeco Instruments Inc. and certain other parties thereto.

 

10-K

 

2.1

 

2/24/2015

 

 

2.3

 

Agreement and Plan of Merger, dated September 18, 2013, by and among Veeco, Veeco Wyoming Inc., Synos Technology, Inc., certain stockholders of Synos Technology, Inc., and Shareholder Representative Services LLC.

 

10-K

 

2.1

 

2/28/2014

 

 

3.1

 

Amended and Restated Certificate of Incorporation of Veeco dated December 1, 1994, as amended June 2, 1997 and July 25, 1997.

 

10-Q

 

3.1

 

8/14/1997

 

 

3.2

 

Amendment to Certificate of Incorporation of Veeco dated May 29, 1998.

 

10-K

 

3.2

 

3/14/2001

 

 

3.3

 

Amendment to Certificate of Incorporation of Veeco dated May 5, 2000.

 

10-Q

 

3.1

 

8/14/2000

 

 

3.4

 

Amendment to Certificate of Incorporation of Veeco dated May 16, 2002.

 

10-Q

 

3.1

 

10/26/2009

 

 

3.5

 

Amendment to Certificate of Incorporation of Veeco dated May 14, 2010.

 

10-K

 

3.8

 

2/24/2011

 

 

3.6

 

Fifth Amended and Restated Bylaws of Veeco effective February 5, 2016.

 

8-K

 

3.1

 

5/9/2001

 

 

3.7

 

Certificate of Designation, Preferences, and Rights of Series A Junior Participating Preferred Stock of Veeco.

 

8-K

 

3.1

 

5/26/2010

 

 

4.1

 

Indenture, dated as of January 18, 2017, by and between Veeco Instruments Inc. and U.S. Bank National Association, as Trustee (relating to the 2.70% Convertible Notes due 2023).

 

8-K

 

4.1

 

1/18/2017

 

 

4.2

 

First Supplemental Indenture, dated as of January 18, 2017, by and between Veeco Instruments Inc. and U.S. Bank National Association, as Trustee (relating to the 2.70% Convertible Notes due 2023).

 

8-K

 

4.2

 

1/18/2017

 

 

4.3

 

Form of 2.70% Convertible Senior Note due 2023.

 

8-K

 

4.3

 

1/18/2017

 

 

10.1

 

Loan Agreement dated as of December 15, 1999 between Applied Epi, Inc. and Jackson National Life Insurance Company.

 

10-Q

 

10.2

 

11/14/2001

 

 

10.2

 

Promissory Note dated as of December 15, 1999 issued by Applied Epi, Inc. to Jackson National Life Insurance Company.

 

10-Q

 

10.3

 

11/14/2001

 

 

 

44



Table of Contents

 

 

 

 

 

 

 

 

 

 

 

Filed or

Exhibit

 

 

 

Incorporated by Reference

 

Furnished

Number

 

Exhibit Description

 

Form

 

Exhibit

 

Filing Date

 

Herewith

10.3

 

Amendment to Loan Documents effective as of September 17, 2001 between Applied Epi, Inc. and Jackson National Life Insurance Company (executed in June 2002).

 

10-Q

 

10.2

 

8/14/2002

 

 

10.4*

 

Veeco Amended and Restated 2000 Stock Incentive Plan, effective July 20, 2006.

 

10-Q

 

10.4

 

8/4/2006

 

 

10.5*

 

Amendment No. 1 effective April 18, 2007 (ratified by the Board August 7, 2007) to Veeco Amended and Restated 2000 Stock Incentive Plan.

 

10-Q

 

10.1

 

8/7/2007

 

 

10.6*

 

Amendment No. 2 dated January 22, 2009 to Veeco Amended and Restated 2000 Stock Incentive Plan.

 

10-K

 

10.41

 

3/2/2009

 

 

10.7*

 

Veeco Amended and Restated 2010 Stock Incentive Plan, effective May 14, 2010.

 

Def 14A

 

Appendix A

 

11/4/2013

 

 

10.8*

 

Veeco Amended and Restated 2010 Stock Incentive Plan, effective May 5, 2016.

 

S-8

 

10.1

 

6/2/2016

 

 

10.9*

 

Form of Notice of Performance Share Award and related terms and conditions pursuant to the Veeco 2010 Stock Incentive Plan, effective June 2015.

 

10-Q

 

10.1

 

8/3/2015

 

 

10.10*

 

Form of Notice of Performance Share Award and related terms and conditions pursuant to the Veeco 2010 Stock Incentive Plan, effective June 2016.

 

10-Q

 

10.1

 

11/1/2016

 

 

10.11*

 

Form of Notice of Critical Priorities Performance Share Award and related terms and conditions pursuant to the Veeco 2010 Stock Incentive Plan, effective June 2016.

 

10-Q

 

10.2

 

11/1/2016

 

 

10.12*

 

Veeco 2013 Inducement Stock Incentive Plan, effective September 26, 2013.

 

10-Q

 

10.1

 

11/4/2013

 

 

10.13*

 

Form of 2013 Inducement Stock Incentive Plan Stock Option Agreement.

 

10-Q

 

10.2

 

11/4/2013

 

 

10.14*

 

Form of 2013 Inducement Stock Incentive Plan Restricted Stock Unit Agreement.

 

10-Q

 

10.3

 

11/4/2013

 

 

10.15*

 

Veeco Instruments Inc. 2016 Employee Stock Purchase Plan.

 

S-8

 

10.9

 

6/2/2016

 

 

10.16*

 

Form of Support Agreement (issued in connection with the Agreement and Plan of Merger with Ultratech, Inc. dated February 2, 2017).

 

8-K

 

10.1

 

2/3/2017

 

 

10.17*

 

Form of Indemnification Agreement entered into between Veeco and each of its directors and executive officers.

 

8-K

 

10.1

 

10/23/2006

 

 

10.18*

 

Veeco Amended and Restated Senior Executive Change in Control Policy, effective as of January 1, 2014.

 

10-K

 

10.22

 

2/28/2014

 

 

10.19*

 

Employment Agreement effective as of July 1, 2007 between Veeco and John R. Peeler.

 

10-Q

 

10.3

 

8/7/2007

 

 

10.20*

 

Amendment effective December 31, 2008 to Employment Agreement between Veeco and John R. Peeler.

 

10-K

 

10.38

 

3/2/2009

 

 

10.21*

 

Second Amendment effective June 11, 2010 to Employment Agreement between Veeco and John R. Peeler.

 

10-Q

 

10.1

 

7/29/2010

 

 

10.22*

 

Third Amendment effective April 27, 2012 to Employment Agreement between Veeco and John R. Peeler.

 

10-Q

 

10.2

 

5/9/2012

 

 

10.23*

 

Amendment dated June 12, 2014 to Employment Agreement between Veeco and John R. Peeler.

 

10-Q

 

10.3

 

7/31/2014

 

 

10.24*

 

Letter Agreement dated April 8, 2014 between Veeco and Shubham Maheshwari.

 

10-Q

 

10.1

 

7/31/2014

 

 

10.25*

 

Letter Agreement dated January 30, 2012 between Veeco and Dr. William J. Miller.

 

10-K

 

10.3

 

2/22/2012

 

 

 

45



Table of Contents

 

 

 

 

 

 

 

 

 

 

 

Filed or

Exhibit

 

 

 

Incorporated by Reference

 

Furnished

Number

 

Exhibit Description

 

Form

 

Exhibit

 

Filing Date

 

Herewith

10.26*

 

Letter dated December 22, 2015 from Veeco to Dr. William J. Miller.

 

10-K

 

10.21

 

2/25/2016

 

 

10.27*

 

Letter Agreement dated January 21, 2004 between Veeco and John P. Kiernan.

 

10-K

 

10.38

 

3/12/2004

 

 

10.28*

 

Amendment effective June 9, 2006 to Letter Agreement between Veeco and John P. Kiernan.

 

10-Q

 

10.3

 

8/4/2006

 

 

10.29*

 

Amendment effective December 31, 2008 to Letter Agreement between Veeco and John P. Kiernan.

 

10-K

 

10.40

 

3/2/2009

 

 

10.30*

 

Letter Agreement effective as of June 19, 2009 between Veeco and John P. Kiernan.

 

10-Q

 

10.2

 

7/30/2009

 

 

16.1

 

Letter to the Securities and Exchange Commission from Ernst & Young LLP, dated March 19, 2015.

 

8-K

 

16.1

 

3/19/2015

 

 

21.1

 

Subsidiaries of the Registrant.

 

 

 

 

 

 

 

X

23.1

 

Consent of KPMG LLP.

 

 

 

 

 

 

 

X

23.2

 

Consent of Ernst & Young LLP.

 

 

 

 

 

 

 

X

31.1

 

Certification of Chief Executive Officer pursuant to Rule 13a—14(a) or Rule 15d—14(a) of the Securities and Exchange Act of 1934.

 

 

 

 

 

 

 

X

31.2

 

Certification of Chief Financial Officer pursuant to Rule 13a—14(a) or Rule 15d—14(a) of the Securities and Exchange Act of 1934.

 

 

 

 

 

 

 

X

32.1

 

Certification of Chief Executive Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes - Oxley Act of 2002.

 

 

 

 

 

 

 

X

32.2

 

Certification of Chief Financial Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes - Oxley Act of 2002.

 

 

 

 

 

 

 

X

101.INS

 

XBRL Instance.

 

 

 

 

 

 

 

**

101.XSD

 

XBRL Schema.

 

 

 

 

 

 

 

**

101.PRE

 

XBRL Presentation.

 

 

 

 

 

 

 

**

101.CAL

 

XBRL Calculation.

 

 

 

 

 

 

 

**

101.DEF

 

XBRL Definition.

 

 

 

 

 

 

 

**

101.LAB

 

XBRL Label.

 

 

 

 

 

 

 

**

 

*   Indicates a management contract or compensatory plan or arrangement, as required by Item 15(a) (3) of Form 10-K.

** Filed herewith electronically

 

46



Table of Contents

 

SIGNATURES

 

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, as amended, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized, on February 22, 2017.

 

 

Veeco Instruments Inc.

 

 

 

 

By:

/S/ JOHN R. PEELER

 

 

John R. Peeler

 

 

Chairman and Chief Executive Officer

 

 

Pursuant to the requirements of the Securities Exchange Act of 1934, as amended, this report has been signed below by the following persons on behalf of the Registrant and in the capacities indicated, on February 22, 2017.

 

Signature

 

Title

 

 

 

 /s/ JOHN R. PEELER

 

Chairman and Chief Executive Officer

John R. Peeler

 

(principal executive officer)

 

 

 

 /s/ SHUBHAM MAHESHWARI

 

Executive Vice President and Chief Financial Officer

Shubham Maheshwari

 

(principal financial officer)

 

 

 

 

 

Senior Vice President, Finance, Chief Accounting Officer,

 /s/ JOHN P. KIERNAN

 

Corporate Controller and Treasurer

John P. Kiernan

 

(principal accounting officer)

 

 

 

 /s/ KATHLEEN A. BAYLESS

 

Director

Kathleen A. Bayless

 

 

 

 

 

 /s/ RICHARD A. D’AMORE

 

Director

Richard A. D’Amore

 

 

 

 

 

 /s/ GORDON HUNTER

 

Director

Gordon Hunter

 

 

 

 

 

 /s/ KEITH D. JACKSON

 

Director

Keith D. Jackson

 

 

 

 

 

 /s/ PETER J. SIMONE

 

Director

Peter J. Simone

 

 

 

 

 

 /s/ THOMAS ST. DENNIS

 

Director

Thomas St. Dennis

 

 

 

47



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

 

 

Index to Consolidated Financial Statements and Financial Statement Schedule

 

 

 

Page

 

 

Reports of Independent Registered Public Accounting Firms on Financial Statements

F-2

Consolidated Balance Sheets at December 31, 2016 and 2015

F-4

Consolidated Statements of Operations for the years ended December 31, 2016, 2015, and 2014

F-5

Consolidated Statements of Comprehensive Income (Loss) for the years ended December 31, 2016, 2015, and 2014

F-6

Consolidated Statements of Stockholders’ Equity for the years ended December 31, 2016, 2015, and 2014

F-7

Consolidated Statements of Cash Flows for the years ended December 31, 2016, 2015, and 2014

F-8

Notes to Consolidated Financial Statements

F-9

Schedule II—Valuation and Qualifying Accounts

S-1

 

F-1



Table of Contents

 

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

 

The Board of Directors and Stockholders of

Veeco Instruments Inc.:

 

We have audited the accompanying consolidated balance sheets of Veeco Instruments Inc. and subsidiaries as of December 31, 2016 and 2015, and the related consolidated statements of operations, comprehensive income (loss), stockholders’ equity, and cash flows for each of the years in the two-year period ended December 31, 2016. In connection with our audit of the consolidated financial statements, we also have audited Schedule II – Valuation and Qualifying Accounts. These consolidated financial statements and financial statement schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements and financial statement schedule based on our audit.

 

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

 

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Veeco Instruments Inc. and subsidiaries as of December 31, 2016 and 2015, and the results of their operations and their cash flows for each of the years in the two-year period ended December 31, 2016, in conformity with U.S. generally accepted accounting principles. Also in our opinion, the related financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.

 

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Veeco Instrument Inc.’s internal control over financial reporting as of December 31, 2016, based on criteria established in Internal Control – Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) , and our report dated February 22, 2017 expressed an unqualified opinion on the effectiveness of the Company’s internal control over financial reporting.

 

/s/ KPMG LLP

 

 

 

Melville, New York

 

February 22, 2017

 

 

F-2



Table of Contents

 

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

 

The Board of Directors and Stockholders of

Veeco Instruments Inc.

 

We have audited the accompanying consolidated statements of operations, comprehensive income (loss), stockholders’ equity, and cash flows of Veeco Instruments, Inc. (the “Company”) for the year ended December 31, 2014. Our audit also included the financial statement schedule listed in the Index at Item 15(a). These financial statements and schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements and schedule based on our audit.

 

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audit provides a reasonable basis for our opinion.

 

In our opinion, the financial statements referred to above present fairly, in all material respects, the consolidated results of its operations and its cash flows of Veeco Instruments, Inc. for the year ended December 31, 2014, in conformity with U.S. generally accepted accounting principles. Also, in our opinion, the related financial statement schedule, when considered in relation to the basic financial statements taken as a whole, present fairly in all material respects the information set forth therein.

 

/s/ ERNST & YOUNG LLP

 

Jericho, New York
February 24, 2015

 

F-3



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Consolidated Balance Sheets

(in thousands, except share amounts)

 

 

 

December 31,

 

 

 

2016

 

 

2015

 

Assets

 

 

 

 

 

 

Current assets:

 

 

 

 

 

 

Cash and cash equivalents

 

$

277,444

 

 

$

269,232

 

Short-term investments

 

66,787

 

 

116,050

 

Accounts receivable, net

 

58,020

 

 

49,524

 

Inventories

 

77,063

 

 

77,469

 

Deferred cost of sales

 

6,160

 

 

2,100

 

Prepaid expenses and other current assets

 

16,034

 

 

22,760

 

Assets held for sale

 

 

 

5,000

 

Total current assets

 

501,508

 

 

542,135

 

Property, plant and equipment, net

 

60,646

 

 

79,590

 

Intangible assets, net

 

58,378

 

 

131,674

 

Goodwill

 

114,908

 

 

114,908

 

Deferred income taxes

 

2,045

 

 

1,384

 

Other assets

 

21,047

 

 

21,098

 

Total assets

 

$

758,532

 

 

$

890,789

 

 

 

 

 

 

 

 

Liabilities and stockholders’ equity

 

 

 

 

 

 

Current liabilities:

 

 

 

 

 

 

Accounts payable

 

$

22,607

 

 

$

30,074

 

Accrued expenses and other current liabilities

 

33,201

 

 

49,393

 

Customer deposits and deferred revenue

 

85,022

 

 

76,216

 

Income taxes payable

 

2,311

 

 

6,208

 

Current portion of long-term debt

 

368

 

 

340

 

Total current liabilities

 

143,509

 

 

162,231

 

Deferred income taxes

 

13,199

 

 

11,211

 

Long-term debt

 

826

 

 

1,193

 

Other liabilities

 

6,403

 

 

1,539

 

Total liabilities

 

163,937

 

 

176,174

 

Stockholders’ equity:

 

 

 

 

 

 

Preferred stock, $0.01 par value; 500,000 shares authorized; no shares issued and outstanding

 

 

 

 

Common stock, $0.01 par value; 120,000,000 shares authorized; 40,714,790 and 40,995,694 shares issued at December 31, 2016 and 2015, respectively; 40,588,194 and 40,526,902 shares outstanding at December 31, 2016 and 2015, respectively.

 

407

 

 

410

 

Additional paid-in capital

 

763,303

 

 

767,137

 

Accumulated deficit

 

(168,583

)

 

(45,058

)

Accumulated other comprehensive income

 

1,777

 

 

1,348

 

Treasury stock, at cost, 126,596 and 468,792 shares at December 31, 2016 and 2015, respectively.

 

(2,309

)

 

(9,222

)

Total stockholders’ equity

 

594,595

 

 

714,615

 

Total liabilities and stockholders’ equity

 

$

758,532

 

 

$

890,789

 

 

 

See accompanying Notes to the Consolidated Financial Statements.

 

F-4



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Consolidated Statements of Operations

(in thousands, except per share amounts)

 

 

 

For the year ended December 31,

 

 

 

2016

 

 

2015

 

 

2014

 

Net sales

 

$

332,451

 

 

$

477,038

 

 

$

392,873

 

Cost of sales

 

199,593

 

 

299,797

 

 

257,991

 

Gross profit

 

132,858

 

 

177,241

 

 

134,882

 

Operating expenses, net:

 

 

 

 

 

 

 

 

 

Research and development

 

81,016

 

 

78,543

 

 

81,171

 

Selling, general, and administrative

 

77,642

 

 

90,188

 

 

89,760

 

Amortization of intangible assets

 

19,219

 

 

27,634

 

 

13,146

 

Restructuring

 

5,640

 

 

4,679

 

 

4,394

 

Asset impairment

 

69,520

 

 

126

 

 

58,170

 

Changes in contingent consideration

 

 

 

 

 

(29,368

)

Other, net

 

223

 

 

(697

)

 

(3,182

)

Total operating expenses, net

 

253,260

 

 

200,473

 

 

214,091

 

Operating income (loss)

 

(120,402

)

 

(23,232

)

 

(79,209

)

Interest income

 

1,180

 

 

1,050

 

 

1,570

 

Interest expense

 

(222

)

 

(464

)

 

(715

)

Income (loss) before income taxes

 

(119,444

)

 

(22,646

)

 

(78,354

)

Income tax expense (benefit)

 

2,766

 

 

9,332

 

 

(11,414

)

Net income (loss)

 

$

(122,210

)

 

$

(31,978

)

 

$

(66,940

)

 

 

 

 

 

 

 

 

 

 

Income (loss) per common share:

 

 

 

 

 

 

 

 

 

Basic

 

$

(3.11

)

 

$

(0.80

)

 

$

(1.70

)

Diluted

 

$

(3.11

)

 

$

(0.80

)

 

$

(1.70

)

 

 

 

 

 

 

 

 

 

 

Weighted average number of shares:

 

 

 

 

 

 

 

 

 

Basic

 

39,340

 

 

39,742

 

 

39,350

 

Diluted

 

39,340

 

 

39,742

 

 

39,350

 

 

 

See accompanying Notes to the Consolidated Financial Statements.

 

F-5



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Consolidated Statements of Comprehensive Income (Loss)

(in thousands)

 

 

 

For the year ended December 31,

 

 

 

2016

 

 

2015

 

 

2014

 

Net income (loss)

 

$

(122,210

)

 

$

(31,978

)

 

$

(66,940

)

Other comprehensive income (loss), net of tax:

 

 

 

 

 

 

 

 

 

Available-for-sale securities:

 

 

 

 

 

 

 

 

 

Change in net unrealized gains or losses

 

(6

)

 

(49

)

 

51

 

Reclassification adjustments for net (gains) losses included in net income

 

18

 

 

 

 

(65

)

Net changes related to available-for-sale securities

 

12

 

 

(49

)

 

(14

)

Minimum pension liability:

 

 

 

 

 

 

 

 

 

Change in minimum pension liability

 

 

 

15

 

 

(145

)

Reclassification adjustments for net (gains) losses included in net income

 

866

 

 

 

 

 

Net changes related to minimum pension liability

 

866

 

 

15

 

 

(145

)

Currency translation adjustments:

 

 

 

 

 

 

 

 

 

Change in currency translation adjustments

 

(19

)

 

(87

)

 

149

 

Reclassification adjustments for net (gains) losses included in net income

 

(430

)

 

 

 

(3,142

)

Net changes related to currency translation adjustments

 

(449

)

 

(87

)

 

(2,993

)

 

 

 

 

 

 

 

 

 

 

Other comprehensive income (loss), net of tax

 

429

 

 

(121

)

 

(3,152

)

 

 

 

 

 

 

 

 

 

 

Total comprehensive income (loss)

 

$

(121,781

)

 

$

(32,099

)

 

$

(70,092

)

 

 

See accompanying Notes to the Consolidated Financial Statements.

 

F-6



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Consolidated Statements of Stockholders’ Equity

(in thousands)

 

 

 

 

 

 

 

 

 

 

 

 

 

Retained

 

Accumulated

 

 

 

 

 

 

 

 

 

 

 

 

 

Additional

 

Earnings

 

Other

 

 

 

 

 

Common Stock

 

Treasury Stock

 

Paid-in

 

(Accumulated

 

Comprehensive

 

 

 

 

 

Shares

 

Amount

 

Shares

 

Amount

 

Capital

 

Deficit)

 

Income

 

Total

 

Balance at December 31, 2013

 

39,666

 

$

397

 

 

$

 

$

721,352

 

$

53,860

 

$

4,621

 

$

780,230

 

Net loss

 

 

 

 

 

 

(66,940

)

 

(66,940

)

Other comprehensive loss, net of tax

 

 

 

 

 

 

 

(3,152

)

(3,152

)

Share-based compensation expense

 

 

 

 

 

18,813

 

 

 

18,813

 

Net issuance under employee stock plans

 

694

 

7

 

 

 

9,974

 

 

 

9,981

 

Balance at December 31, 2014

 

40,360

 

404

 

 

 

750,139

 

(13,080

)

1,469

 

738,932

 

Net loss

 

 

 

 

 

 

(31,978

)

 

(31,978

)

Other comprehensive loss, net of tax

 

 

 

 

 

 

 

(121

)

(121

)

Share-based compensation expense

 

 

 

 

 

17,986

 

 

 

17,986

 

Net issuance under employee stock plans

 

636

 

6

 

 

 

(988

)

 

 

(982

)

Purchases of common stock

 

 

 

469

 

(9,222

)

 

 

 

(9,222

)

Balance at December 31, 2015

 

40,996

 

410

 

469

 

(9,222

)

767,137

 

(45,058

)

1,348

 

714,615

 

Cumulative effect of change in accounting principle - adoption of ASU 2016-09

 

 

 

 

 

1,315

 

(1,315

)

 

 

Net loss

 

 

 

 

 

 

(122,210

)

 

(122,210

)

Other comprehensive income, net of tax

 

 

 

 

 

 

 

429

 

429

 

Share-based compensation expense

 

 

 

 

 

15,741

 

 

 

15,741

 

Net issuance under employee stock plans

 

(281

)

(3

)

(1,072

)

19,948

 

(20,890

)

 

 

(945

)

Purchases of common stock

 

 

 

730

 

(13,035

)

 

 

 

(13,035

)

Balance at December 31, 2016

 

40,715

 

$

407

 

127

 

$

(2,309

)

$

763,303

 

$

(168,583

)

$

1,777

 

$

594,595

 

 

 

See accompanying Notes to the Consolidated Financial Statements.

 

F-7



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Consolidated Statements of Cash Flows

(in thousands)

 

 

 

 

For the year ended December 31,

 

 

 

2016

 

2015

 

2014

Cash Flows from Operating Activities

 

 

 

 

 

 

 

 

 

Net income (loss)

 

$

(122,210

)

 

$

(31,978

)

 

$

(66,940

)

Adjustments to reconcile net income (loss) to net cash provided by (used in) operating activities:

 

 

 

 

 

 

 

 

 

Depreciation and amortization

 

32,650

 

 

39,850

 

 

24,573

 

Deferred income taxes

 

940

 

 

2,648

 

 

(11,330

)

Share-based compensation expense

 

15,741

 

 

17,986

 

 

18,813

 

Asset impairment

 

69,520

 

 

126

 

 

58,170

 

Gain on sale of lab tools

 

 

 

(1,261

)

 

(1,549

)

Provision (recovery) for bad debts

 

171

 

 

43

 

 

(1,814

)

Gain on cumulative translation adjustment

 

(430

)

 

 

 

(3,142

)

Change in contingent consideration

 

 

 

 

 

(29,368

)

Changes in operating assets and liabilities:

 

 

 

 

 

 

 

 

 

Accounts receivable

 

(8,667

)

 

10,715

 

 

(25,390

)

Inventories and deferred cost of sales

 

(5,389

)

 

(12,312

)

 

6,513

 

Prepaid expenses and other current assets

 

6,726

 

 

(39

)

 

(2,245

)

Accounts payable and accrued expenses

 

(24,202

)

 

9,470

 

 

(5,534

)

Customer deposits and deferred revenue

 

8,807

 

 

(20,738

)

 

55,536

 

Income taxes receivable and payable, net

 

547

 

 

759

 

 

20,279

 

Other, net

 

1,952

 

 

520

 

 

5,497

 

Net cash provided by (used in) operating activities

 

(23,844

)

 

15,789

 

 

42,069

 

 

 

 

 

 

 

 

 

 

 

Cash Flows from Investing Activities

 

 

 

 

 

 

 

 

 

Acquisitions of businesses, net of cash acquired

 

 

 

(68

)

 

(144,069

)

Capital expenditures

 

(11,479

)

 

(13,887

)

 

(15,588

)

Proceeds from the sale of investments

 

152,301

 

 

88,647

 

 

318,276

 

Payments for purchases of investments

 

(103,394

)

 

(84,244

)

 

(157,737

)

Payments for purchases of cost method investment

 

 

 

(1,594

)

 

(2,388

)

Proceeds from sale of property, plant, and equipment

 

9,512

 

 

 

 

 

Proceeds from sale of lab tools

 

 

 

3,068

 

 

9,259

 

Other

 

(230

)

 

1,000

 

 

350

 

Net cash provided by (used in) investing activities

 

46,710

 

 

(7,078

)

 

8,103

 

 

 

 

 

 

 

 

 

 

 

Cash Flows from Financing Activities

 

 

 

 

 

 

 

 

 

Proceeds from stock option exercises and employee stock purchase plan

 

1,656

 

 

2,233

 

 

12,056

 

Restricted stock tax withholdings

 

(2,601

)

 

(3,215

)

 

(2,075

)

Purchases of common stock

 

(13,349

)

 

(8,907

)

 

 

Repayments of long-term debt

 

(340

)

 

(314

)

 

(290

)

Net cash provided by (used) in financing activities

 

(14,634

)

 

(10,203

)

 

9,691

 

 

 

 

 

 

 

 

 

 

 

Effect of exchange rate changes on cash and cash equivalents

 

(20

)

 

(87

)

 

149

 

Net increase in cash and cash equivalents

 

8,212

 

 

(1,579

)

 

60,012

 

Cash and cash equivalents - beginning of period

 

269,232

 

 

270,811

 

 

210,799

 

Cash and cash equivalents - end of period

 

$

277,444

 

 

$

269,232

 

 

$

270,811

 

 

 

 

 

 

 

 

 

 

 

Supplemental Disclosure of Cash Flow Information

 

 

 

 

 

 

 

 

 

Interest paid

 

$

225

 

 

$

485

 

 

$

159

 

Income taxes paid

 

1,699

 

 

7,091

 

 

3,320

 

Non-cash operating and financing activities

 

 

 

 

 

 

 

 

 

Net transfer of inventory to property, plant and equipment

 

1,827

 

 

 

 

 

 

 

See accompanying Notes to the Consolidated Financial Statements.

 

F-8


 


Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Notes to Consolidated Financial Statements

 

Note 1 — Significant Accounting Policies

 

(a) Description of Business

 

Veeco Instruments Inc. (together with its consolidated subsidiaries, “Veeco,” or the “Company”) operates in a single segment: the design, development, manufacture, and support of thin film process equipment primarily sold to make electronic devices including light emitting diodes (“LEDs”), power electronics, wireless devices, hard disk drives, and semiconductors.

 

(b) Basis of Presentation

 

The accompanying audited Consolidated Financial Statements of the Company have been prepared in accordance with United States generally accepted accounting principles (“GAAP”). The Company reports interim quarters on a 13-week basis ending on the last Sunday of each period, which is determined at the start of each year. The Company’s fourth quarter always ends on the last day of the calendar year, December 31. During 2016 the interim quarters ended on April 3, July 3, and October 2, and during 2015 the interim quarters ended on March 29, June 28 and September 27. The Company reports these interim quarters as March 31, June 30, and September 30 in its interim consolidated financial statements.

 

(c) Use of Estimates

 

The preparation of financial statements in conformity with GAAP requires management to make estimates and assumptions that affect the amounts reported in the financial statements and accompanying notes. Although these estimates are based on management’s knowledge of current events and actions it may undertake in the future, these estimates may ultimately differ from actual results. Significant items subject to such estimates and assumptions include: (i) the best estimate of selling price for the Company’s products and services; (ii) allowances for doubtful accounts; (iii) inventory obsolescence; (iv) the useful lives and expected future cash flows of property, plant, and equipment and identifiable intangible assets; (v) the fair value of the Company’s reporting unit and related goodwill; (vi) the fair value, less cost to sell, of assets held for sale; (vii) investment valuations and the valuation of derivatives, deferred tax assets, and assets acquired in business combinations; (viii) the recoverability of long-lived assets; (ix) liabilities for product warranty and legal contingencies; (x) share-based compensation; and (xi) income tax uncertainties. Actual results could differ from those estimates.

 

(d) Principles of Consolidation

 

The Consolidated Financial Statements include the accounts of the Company and its subsidiaries. Intercompany balances and transactions have been eliminated in consolidation. Companies acquired during each reporting period are reflected in the results of the Company effective from their respective dates of acquisition through the end of the reporting period.

 

(e) Foreign Currencies

 

Assets and liabilities of the Company’s foreign subsidiaries that operate using local functional currencies are translated using the exchange rates in effect at the balance sheet date. Results of operations are translated using monthly average exchange rates. Adjustments arising from the translation of the foreign currency financial statements of the Company’s subsidiaries into U.S. dollars, including intercompany transactions of a long-term nature, are reported as currency translation adjustments in “Accumulated other comprehensive income” in the Consolidated Balance Sheets. Foreign currency transaction gains or losses are included in “Other, net” in the Consolidated Statements of Operations.

 

F-9



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Notes to Consolidated Financial Statements (Continued)

 

(f) Revenue Recognition

 

The Company recognizes revenue when all of the following criteria have been met: persuasive evidence of an arrangement exists with a customer; delivery of the specified products has occurred or services have been rendered; prices are contractually fixed or determinable; and collectability is reasonably assured. Revenue is recorded including shipping and handling costs and excluding applicable taxes related to sales.

 

Contracts with customers frequently contain multiple deliverables, such as systems, upgrades, components, spare parts, maintenance, and service plans. Judgment is required to properly identify the accounting units of the multiple-element arrangements and to determine how the revenue should be allocated among the accounting units. The Company also evaluates whether multiple transactions with the same customer or related parties should be considered part of a single, multiple-element arrangement based on an assessment of whether the contracts or agreements are negotiated or executed within a short time frame of each other or if there are indicators that the contracts are negotiated in contemplation of one another. Moreover, judgment is used in interpreting the commercial terms and determining when all criteria have been met in order to recognize revenue in the appropriate accounting period.

 

When there are separate units of accounting, the Company allocates revenue to each element based on the following selling price hierarchy: vendor-specific objective evidence (“VSOE”) if available; third party evidence (“TPE”) if VSOE is not available; or the best estimate of selling price (“BESP”) if neither VSOE nor TPE is available. The Company uses BESP for the elements in its arrangements. The maximum revenue recognized on a delivered element is limited to the amount that is not contingent upon the delivery of additional items.

 

The Company considers many facts when evaluating each of its sales arrangements to determine the timing of revenue recognition including its contractual obligations, the customer’s creditworthiness, and the nature of the customer’s post-delivery acceptance provisions. The Company’s system sales arrangements, including certain upgrades, generally include field acceptance provisions that may include functional or mechanical test procedures. For the majority of the arrangements, a customer source inspection of the system is performed in the Company’s facility or test data is sent to the customer documenting that the system is functioning to the agreed upon specifications prior to delivery. Historically, such source inspection or test data replicates the field acceptance provisions that are performed at the customer’s site prior to final acceptance of the system. When the Company objectively demonstrates that the criteria specified in the contractual acceptance provisions are achieved prior to delivery, revenue is recognized upon system delivery since there is no substantive contingency remaining related to the acceptance provisions at that date, subject to the retention amount constraint described below. For new products, new applications of existing products, or for products with substantive customer acceptance provisions where the Company cannot objectively demonstrate that the criteria specified in the contractual acceptance provisions have been achieved prior to delivery, revenue and the associated costs are deferred and fully recognized upon the receipt of final customer acceptance, assuming all other revenue recognition criteria have been met.

 

The Company’s system sales arrangements, including certain upgrades, generally do not contain provisions for right of return, forfeiture, refund, or other purchase price concession. In the rare instances where such provisions are included, all revenue is deferred until such rights expire. The sales arrangements generally include installation. The installation process is not deemed essential to the functionality of the equipment since it is not complex; it does not require significant changes to the features or capabilities of the equipment or involve constructing elaborate interfaces or connections subsequent to factory acceptance. The Company has a demonstrated history of consistently completing installations in a timely manner and can reliably estimate the costs of such activities. Most customers engage the Company to perform the installation services, although there are other third-party providers with sufficient knowledge who could complete these services. Based on these factors, installation is deemed to be inconsequential or perfunctory relative to the system sale as a whole, and as a result, installation service is not considered a separate element of the arrangement. As such, the Company accrues the cost of the installation at the time of revenue recognition for the system.

 

F-10



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Notes to Consolidated Financial Statements (Continued)

 

In many cases the Company’s products are sold with a billing retention, typically 10% of the sales price, which is payable by the customer when field acceptance provisions are completed. The amount of revenue recognized upon delivery of a system or upgrade, if any, is limited to the lower of i) the amount billed that is not contingent upon acceptance provisions or ii) the value of the arrangement consideration allocated to the delivered elements, if such sale is part of a multiple-element arrangement.

 

The Company’s contractual terms with customers in Japan generally specify that title and risk and rewards of ownership transfer upon customer acceptance. As a result, for customers in Japan, revenue is recognized upon the receipt of written customer acceptance. A distributor is used for almost all sales to customers in Japan. Title passes to the distributor upon shipment; however, due to customary local business practices, the risks and rewards of ownership of the system transfer to the end-customers upon their acceptance. As such, the Company recognizes revenue upon receipt of written acceptance from the end customer.

 

The Company recognizes revenue related to maintenance and service contracts ratably over the applicable contract term. The Company recognizes revenue from the sales of components, spare parts, and specified service engagements at the time of delivery in accordance with the terms of the applicable sales arrangement.

 

Incremental direct costs incurred related to the acquisition of a customer contract, such as sales commissions, are expensed as incurred, even if the related revenue is deferred in accordance with the above policy.

 

(g) Warranty Costs

 

The Company typically provides standard warranty coverage on its systems for one year from the date of final acceptance by providing labor and parts necessary to repair the systems during the warranty period. The Company accounts for the estimated warranty cost when revenue is recognized on the related system. Warranty cost is included in “Cost of sales” in the Consolidated Statements of Operations. The estimated warranty cost is based on the Company’s historical experience with its systems and regional labor costs. The Company calculates the average service hours by region and parts expense per system utilizing actual service records to determine the estimated warranty charge. The Company updates its warranty estimates on a semiannual basis when the actual product performance or field expense differs from original estimates.

 

(h) Shipping and Handling Costs

 

Shipping and handling costs are expenses incurred to move, package, and prepare the Company’s products for shipment and to move the products to a customer’s designated location. These costs are generally comprised of payments to third-party shippers. Shipping and handling costs are included in “Cost of sales” in the Consolidated Statements of Operations.

 

(i) Research and Development Costs

 

Research and development costs are expensed as incurred and include charges for the development of new technology and the transition of existing technology into new products or services.

 

(j) Advertising Expense

 

The cost of advertising is expensed as incurred and totaled $0.8 million, $0.9 million, and $0.6 million for the years ended December 31, 2016, 2015, and 2014, respectively.

 

(k) Accounting for Share-Based Compensation

 

Share-based awards exchanged for employee services are accounted for under the fair value method. Accordingly, share-based compensation cost is measured at the grant date based on the fair value of the award. The expense for awards is recognized over the employee’s requisite service period (generally the vesting period of the award).

 

F-11



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Notes to Consolidated Financial Statements (Continued)

 

The Company has elected to treat awards with only service conditions and with graded vesting as one award. Consequently, the total compensation expense is recognized straight-line over the entire vesting period, so long as the compensation cost recognized at any date at least equals the portion of the grant date fair value of the award that is vested at that date.

 

The Company uses the Black-Scholes option-pricing model to compute the estimated fair value of option awards, as well as purchase rights under the Employee Stock Purchase Plan. The Black-Scholes model includes assumptions regarding dividend yields, expected volatility, expected option term, and risk-free interest rates. See Note 15, “Stock Plans,” for additional information.

 

In addition to stock options, restricted share awards (“RSAs”) and restricted stock units (“RSUs”) with time-based vesting, the Company issues performance share units and awards (“PSUs” and “PSAs”). Compensation cost for PSUs and PSAs is recognized over the requisite service period based on the timing and expected level of achievement of the performance targets. A change in the assessment of the probability of a performance condition being met is recognized in the period of the change in estimate. At the conclusion of the performance period, the number of shares granted may vary based on the level of achievement of the performance targets.

 

See Note 1(u), “Recently Adopted Accounting Standards,” for additional information concerning the Company’s early adoption of Accounting Standards Update (“ASU”) 2016-09: Stock Compensation: Improvements to Employee Share-Based Payment Accounting.

 

(l) Income Taxes

 

Income taxes are accounted for under the asset and liability method. Deferred tax assets and liabilities are recognized for the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases and operating loss and tax credit carryforwards. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled. The effect on deferred tax assets and liabilities from a change in tax rate is recognized in income in the period that includes the enactment date.

 

See Note 1(u), “Recently Adopted Accounting Standards,” for additional information concerning the Company’s early adoption of ASU 2015-17: Balance Sheet Classification of Deferred Taxes.

 

(m) Concentration of Credit Risk

 

Financial instruments that potentially subject the Company to concentrations of credit risk consist primarily of cash and cash equivalents, investments, derivative financial instruments used in hedging activities, and accounts receivable. The Company invests in a variety of financial instruments and, by policy, limits the amount of credit exposure with any one financial institution or commercial issuer. The Company has not experienced any material credit losses on its investments.

 

The Company maintains an allowance reserve for potentially uncollectible accounts for estimated losses resulting from the inability of its customers to make required payments. The Company evaluates its allowance for doubtful accounts based on a combination of factors. In circumstances where specific invoices are deemed to be uncollectible, the Company provides a specific allowance for bad debt against the amount due to reduce the net recognized receivable to the amount reasonably expected to be collected. The Company also provides allowances based on its write-off history. The allowance for doubtful accounts totaled $0.3 million and $0.2 million at December 31, 2016 and 2015, respectively.

 

To further mitigate the Company’s exposure to uncollectable accounts, the Company may request certain customers provide a negotiable irrevocable letter of credit drawn on a reputable financial institution. These irrevocable letters of credit are typically issued to mature between zero and 90 days from the date the documentation requirements are met, typically when a system ships or upon receipt of final acceptance from the customer. The Company, at its discretion, may

 

F-12



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Notes to Consolidated Financial Statements (Continued)

 

monetize these letters of credit on a non-recourse basis after they become negotiable, but before maturity. The fees associated with the monetization are included in “Selling, general, and administrative” in the Consolidated Statements of Operations and were insignificant for the years ended December 31, 2016, 2015, and 2014.

 

(n) Fair Value of Financial Instruments

 

The carrying amounts of financial instruments, including cash and cash equivalents, accounts receivable, accounts payable, and accrued expenses reflected in the consolidated financial statements approximate fair value due to their short-term maturities. The fair value of debt for footnote disclosure purposes, including current maturities, is estimated using a discounted cash flow analysis based on the estimated current incremental borrowing rates for similar types of instruments.

 

(o) Cash, Cash Equivalents, and Short-Term Investments

 

All financial instruments purchased with an original maturity of three months or less at the time of purchase are considered cash equivalents. Such items may include liquid money market accounts, U.S. treasuries, government agency securities, and corporate debt. Investments that are classified as cash equivalents are carried at cost, which approximates fair value. The Company’s cash and cash equivalents includes $1.5 million and $18.0 million of cash equivalents at December 31, 2016 and 2015 respectively.

 

A portion of the Company’s cash and cash equivalents is held by its subsidiaries throughout the world, frequently in each subsidiary’s respective functional currency, which is typically the U.S. dollar. Approximately 54% and 50% of cash and cash equivalents were maintained outside the United States at December 31, 2016 and 2015, respectively.

 

Marketable securities are generally classified as available-for-sale for use in current operations, if required, and are reported at fair value, with unrealized gains and losses, net of tax, presented as a separate component of stockholders’ equity under the caption “Accumulated other comprehensive income.” These securities can include U.S. treasuries, government agency securities, corporate debt, and commercial paper, all with maturities of greater than three months when purchased. All realized gains and losses and unrealized losses resulting from declines in fair value that are other than temporary are included in “Other, net” in the Consolidated Statements of Operations. The specific identification method is used to determine the realized gains and losses on investments.

 

(p) Inventories

 

Inventories are stated at the lower of cost or net realizable value, with cost determined on a first-in, first-out basis. The Company reviews and sets standard costs on a periodic basis at current manufacturing costs in order to approximate actual costs. The Company assesses the valuation of all inventories, including manufacturing raw materials, work-in-process, finished goods, and spare parts, each quarter. Obsolete inventory or inventory in excess of management’s estimated usage requirement is written down to its estimated net realizable value if less than cost. Estimates of net realizable value include, but are not limited to, management’s forecasts related to the Company’s future manufacturing schedules, customer demand, technological and/or market obsolescence, general market conditions, possible alternative uses, and ultimate realization of excess inventory. If future customer demand or market conditions are less favorable than the Company’s projections, additional inventory write-downs may be required and would be reflected in cost of sales in the period the revision is made. Inventory acquired as part of a business combination is recorded at fair value on the date of acquisition. See Note 5, “Business Combinations,” for additional information.

 

F-13



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Notes to Consolidated Financial Statements (Continued)

 

(q) Business Combinations

 

The Company allocates the fair value of the purchase consideration of the Company’s acquisitions to the tangible assets, intangible assets, including in-process research and development (“IPR&D”), if any, and liabilities assumed, based on estimated fair values. The excess of the fair value of purchase consideration over the fair values of these identifiable assets and liabilities is recorded as goodwill. IPR&D is initially capitalized at fair value as an intangible asset with an indefinite life and assessed for impairment thereafter. When a project underlying reported IPR&D is completed, the corresponding amount of IPR&D is amortized over the asset’s estimated useful life. Acquisition-related expenses are recognized separately from the business combination and are expensed as incurred in “Selling, General, and Administrative” in the Consolidated Statements of Operations. See Note 5, “Business Combinations,” for additional information.

 

(r) Goodwill and Indefinite-Lived Intangibles

 

Goodwill is an asset representing the future economic benefits arising from assets acquired in a business combination that are not individually identified and separately recognized. Goodwill is measured as the excess of the consideration transferred over the net of the acquisition-date amounts of the identifiable assets acquired and liabilities assumed. Intangible assets with indefinite useful lives are measured at their respective fair values on the acquisition date. Intangible assets related to IPR&D projects are considered to be indefinite-lived until the completion or abandonment of the associated R&D efforts. If and when development is complete, the associated assets would be deemed long-lived and would then be amortized based on their respective estimated useful lives at that point in time. Goodwill and indefinite-lived intangibles are not amortized into results of operations but instead are evaluated for impairment. The Company performs the evaluation in the fourth quarter of each year or more frequently if impairment indicators arise.

 

The Company may first perform a qualitative assessment of whether it is more likely than not that the reporting unit’s fair value is less than its carrying amount, and, if so, the Company then applies the two-step impairment test. The two-step impairment test first compares the fair value of the Company’s reporting unit to its carrying amount. If the fair value exceeds the carrying amount, goodwill is not impaired, and the Company is not required to perform further testing. If the carrying amount exceeds fair value, the Company determines the implied fair value of the goodwill and, if the carrying amount of the goodwill exceeds its implied fair value, then the Company records an impairment loss equal to the difference.

 

The Company determines the fair value of its reporting unit based on a reconciliation of the fair value of the reporting unit to the Company’s adjusted market capitalization. The adjusted market capitalization is calculated by multiplying the average share price of the Company’s common stock for the last ten trading days prior to the measurement date by the number of outstanding common shares and adding a control premium.

 

(s) Long-Lived Assets and Cost Method Investment

 

Long-lived intangible assets consist of purchased technology, customer-related intangible assets, patents, trademarks, covenants not-to-compete, and software licenses and are initially recorded at fair value. Long-lived intangibles are amortized over their estimated useful lives in a method reflecting the pattern in which the economic benefits are consumed or straight-lined if such pattern cannot be reliably determined.

 

Property, plant, and equipment are recorded at cost. Depreciation expense is calculated based on the estimated useful lives of the assets by using the straight-line method. Amortization of leasehold improvements is recognized using the straight-line method over the shorter of the remaining lease term or the estimated useful lives of the improvements.

 

Long-lived assets and cost method investments are reviewed for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable. If circumstances require a long-lived asset or asset group be tested for possible impairment, a recoverability test is performed utilizing undiscounted cash flows expected to

 

F-14



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Notes to Consolidated Financial Statements (Continued)

 

be generated by that asset or asset group compared to its carrying amount. If the carrying amount of the long-lived asset or asset group is not recoverable on an undiscounted cash flow basis, impairment is recognized to the extent the carrying amount exceeds its fair value. Fair value is determined through various valuation techniques including discounted cash flow models or, when available, quoted market values, and third-party appraisals.

 

(t) Recent Accounting Pronouncements

 

The FASB issued ASU 2014-09, as amended: Revenue from Contracts with Customers, which has been codified as Accounting Standards Codification 606 (“ASC 606”). ASC 606 requires the Company’s revenue recognition to depict the transfer of promised goods or services to customers in an amount that reflects the consideration to which the Company expects to be entitled in exchange for those goods or services. ASC 606 outlines a five-step model to make the revenue recognition determination and requires new financial statement disclosures. Publicly-traded companies are required to adopt ASC 606 for reporting periods beginning after December 15, 2017, but can adopt early for annual periods beginning after December 15, 2016. The Company is still finalizing its assessment of the impact of adopting the ASU on its consolidated financial statements and is still evaluating which method of adoption it will select.

 

In January 2016, the FASB issued ASU 2016-01: Financial Instruments — Overall, which requires certain equity investments to be measured at fair value, with changes in fair value recognized in net income. Publicly-traded companies are required to adopt the ASU for reporting periods beginning after December 15, 2017; early adoption is permitted. The Company does not expect this ASU will have a material impact on its consolidated financial statements.

 

In February 2016, the FASB issued ASU 2016-02: Leases, which generally requires the Company’s operating lessee rights and obligations to be recognized as assets and liabilities on the balance sheet. In addition, interest on lease liabilities is to be recognized separately from the amortization of right-of-use assets in the Statement of Operations. Further, payments of the principal portion of lease liabilities are to be classified as financing activities while payments of interest on lease liabilities and variable lease payments are to be classified as operating activities in the Statement of Cash Flows. The transition to the ASU will require leases at the beginning of the earliest period presented to be recognized and measured using a modified retrospective approach. The ASU is effective for fiscal years beginning after December 15, 2018, with early application permitted. The Company is evaluating the anticipated impact of adopting the ASU on its consolidated financial statements.

 

In August 2016, the FASB issued ASU 2016-15, Statement of Cash Flows: Classification of Certain Cash Receipts and Cash Payments, which provides guidance on eight specific cash flow issues, including debt prepayments or debt extinguishment costs. Publicly-traded companies are required to adopt the update for reporting periods beginning after December 15, 2017. The Company does not expect this ASU will have a material impact on its consolidated financial statements.

 

In October 2016, the FASB issued ASU 2016-16, Income Taxes: Intra-Entity Transfers of Assets Other Than Inventory, which requires that entities recognize the income tax consequences of an intra-entity transfer of an asset, other than inventory, when the transfer occurs. Publicly-traded companies are required to adopt the update for reporting periods beginning after December 15, 2017. The Company is evaluating the anticipated effect the ASU will have on its consolidated financial statements.

 

(u) Recently Adopted Accounting Standards

 

In March 2016, the FASB issued ASU 2016-09: Stock Compensation: Improvements to Employee Share-Based Payment Accounting, which simplifies several aspects of the accounting for share-based payments. The Company early adopted the ASU effective January 1, 2016. Beginning in 2016, excess tax benefits and deficiencies are recognized as income tax expense or benefit in the income statement in the reporting period incurred. The Company also made an accounting policy election to account for forfeitures when they occur. The ASU transition guidance requires that this election be applied on a modified retrospective basis through a cumulative-effect adjustment to retained earnings as of the beginning of the

 

F-15



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Notes to Consolidated Financial Statements (Continued)

 

period in which the ASU is effective. Accordingly, the Company recorded a $1.3 million charge to the opening accumulated deficit balance with a corresponding adjustment to additional paid-in capital, resulting in no impact to the opening balance of total stockholders’ equity. In addition, the Company recorded additional deferred tax assets with an equally offsetting valuation allowance of $2.4 million.

 

In November 2015, the FASB issued ASU 2015-17: Balance Sheet Classification of Deferred Taxes, which simplifies the presentation of deferred income taxes by requiring that deferred income tax liabilities and assets be classified as noncurrent in our consolidated balance sheet. Publicly-traded companies are required to adopt the update for reporting periods beginning after December 15, 2016, with early application permitted. The Company early adopted the ASU effective January 1, 2015. In accordance with the ASU’s transition requirements, the Company chose to apply the amendments in the update prospectively. As such, periods prior to 2015 have not been retrospectively adjusted. The adoption of this ASU did not have a material impact on the consolidated financial statements.

 

Note 2 — Income (Loss) Per Share

 

The Company considers unvested share-based awards that have non-forfeitable rights to dividends prior to vesting to be participating shares, which are treated as a separate class of security from the Company’s common shares for calculating per share data. Therefore, the Company applies the two-class method when calculating income (loss) per share. The two-class method is an earnings allocation formula that determines earnings per share for each class of common stock and participating security according to dividends declared and participation rights in undistributed earnings. However, since the holders of the participating shares are not obligated to fund losses, participating shares are excluded from the calculation of loss per share.

 

Basic income (loss) per share is calculated by dividing net income (loss) by the weighted average number of shares outstanding during the period under the two-class method. Diluted income per share is calculated by dividing net income by the weighted average number of shares used to calculate basic income (loss) per share plus the weighted average number of common share equivalents outstanding during the period. The dilutive effect of outstanding options to purchase common stock and non-participating share-based awards is considered in diluted income per share by application of the treasury stock method. The dilutive effect of performance share units is included in diluted income per common share in the periods the performance targets have been achieved. The computations of basic and diluted income (loss) per share for the years ended December 31, 2016, 2015, and 2014 are as follows:

 

F-16


 


Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Notes to Consolidated Financial Statements (Continued)

 

 

 

 

For the year ended December 31,

 

 

 

 

2016

 

 

2015

 

 

2014

 

 

 

(in thousands, except per share amounts)

 

Net income (loss)

 

$

(122,210

)

 

$

(31,978

)

 

$

(66,940

)

 

 

 

 

 

 

 

 

 

 

Net income (loss) per common share:

 

 

 

 

 

 

 

 

 

Basic

 

$

(3.11

)

 

$

(0.80

)

 

$

(1.70

)

Diluted

 

$

(3.11

)

 

$

(0.80

)

 

$

(1.70

)

 

 

 

 

 

 

 

 

 

 

Basic weighted average shares outstanding

 

39,340

 

 

39,742

 

 

39,350

 

Effect of potentially dilutive share-based awards

 

 

 

 

 

 

Diluted weighted average shares outstanding

 

39,340

 

 

39,742

 

 

39,350

 

 

 

 

 

 

 

 

 

 

 

Unvested participating shares excluded from basic weighted average shares outstanding since the securityholders are not obligated to fund losses

 

312

 

 

1,017

 

 

1,141

 

 

 

 

 

 

 

 

 

 

 

Common share equivalents excluded from the diluted weighted average shares outstanding since Veeco incurred a net loss and their effect would be antidilutive

 

107

 

 

146

 

 

339

 

 

 

 

 

 

 

 

 

 

 

Potentially dilutive non-participating shares excluded from the diluted calculation as their effect would be antidilutive

 

1,896

 

 

2,111

 

 

1,123

 

 

Note 3 — Fair Value Measurements

 

Fair value is the price that would be received for an asset or the amount paid to transfer a liability in an orderly transaction between market participants. The Company is required to classify certain assets and liabilities based on the following fair value hierarchy:

 

·                 Level 1: Quoted prices in active markets that are unadjusted and accessible at the measurement date for identical, unrestricted assets or liabilities;

 

·                 Level 2: Quoted prices for identical assets and liabilities in markets that are not active, quoted prices for similar assets and liabilities in active markets or financial instruments for which significant inputs are observable, either directly or indirectly; and

 

·                 Level 3: Prices or valuations that require inputs that are both significant to the fair value measurement and unobservable.

 

A financial instrument’s level within the fair value hierarchy is based on the lowest level of any input that is significant to the fair value measurement. The Company has evaluated the estimated fair value of financial instruments using available market information and valuations as provided by third-party sources. The use of different market assumptions or estimation methodologies could have a significant effect on the estimated fair value amounts.

 

The following table presents the Company’s assets that were measured at fair value on a recurring basis at December 31, 2016 and 2015:

 

F-17



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Notes to Consolidated Financial Statements (Continued)

 

 

 

 

 

Level 1

 

 

 

Level 2

 

 

 

Level 3

 

 

 

Total

 

 

 

(in thousands)

 

December 31, 2016

 

 

 

 

 

 

 

 

 

Cash equivalents

 

 

 

 

 

 

 

 

 

Corporate debt

 

$

 

$

1,501

 

$

 

$

1,501

 

Total

 

 

1,501

 

 

1,501

 

Short-term investments

 

 

 

 

 

 

 

 

 

U.S. treasuries

 

40,008

 

 

 

40,008

 

Government agency securities

 

 

10,012

 

 

10,012

 

Corporate debt

 

 

13,773

 

 

13,773

 

Commercial paper

 

 

2,994

 

 

2,994

 

Total

 

$

40,008

 

$

26,779

 

$

 

$

66,787

 

 

 

 

 

 

 

 

 

 

 

December 31, 2015

 

 

 

 

 

 

 

 

 

Cash equivalents

 

 

 

 

 

 

 

 

 

U.S. treasuries

 

$

9,999

 

$

 

$

 

$

9,999

 

Government agency securities

 

 

4,998

 

 

4,998

 

Commercial paper

 

 

2,999

 

 

2,999

 

Total

 

9,999

 

7,997

 

 

17,996

 

Short-term investments

 

 

 

 

 

 

 

 

 

U.S. treasuries

 

94,918

 

 

 

94,918

 

Government agency securities

 

 

12,988

 

 

12,988

 

Corporate debt

 

 

8,144

 

 

8,144

 

Total

 

$

94,918

 

$

21,132

 

$

 

$

116,050

 

 

Cash equivalents are highly liquid investments with maturities of three months or less when purchased. These investments are carried at cost, which approximates fair value. All investments classified as available-for-sale are recorded at fair value within short-term investments in the Consolidated Balance Sheets. The Company’s investments classified as Level 1 are based on quoted prices that are available in active markets. The Company’s investments classified as Level 2 are valued using observable inputs to quoted market prices, benchmark yields, reported trades, broker/dealer quotes, or alternative pricing sources with reasonable levels of price transparency.

 

Note 4 — Investments

 

At December 31, 2016 and 2015 the amortized cost and fair value of marketable securities were as follows:

 

 

 

 

 

 

 

 

 

Gross

 

 

 

Gross

 

 

 

 

 

 

 

 

 

Amortized

 

 

 

Unrealized

 

 

 

Unrealized

 

 

 

Estimated

 

 

 

 

 

Cost

 

 

 

Gains

 

 

 

Losses

 

 

 

Fair Value

 

 

 

 

 

(in thousands)

 

December 31, 2016

 

 

 

 

 

 

 

 

 

U.S. treasuries

 

$

40,013

 

$

 

$

(5

)

$

40,008

 

Government agency securities

 

10,020

 

 

(8

)

10,012

 

Corporate debt

 

13,780

 

 

(7

)

13,773

 

Commercial paper

 

2,994

 

 

 

2,994

 

Total

 

$

66,807

 

$

 

$

(20

)

$

66,787

 

 

 

 

 

 

 

 

 

 

 

December 31, 2015

 

 

 

 

 

 

 

 

 

U.S. treasuries

 

$

94,935

 

$

6

 

$

(23

)

$

94,918

 

Government agency securities

 

12,985

 

3

 

 

12,988

 

Corporate debt

 

8,144

 

1

 

(1

)

8,144

 

Total

 

$

116,064

 

$

10

 

$

(24

)

$

116,050

 

 

F-18



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Notes to Consolidated Financial Statements (Continued)

 

Available-for-sale securities in a loss position at December 31, 2016 and 2015 were as follows:

 

 

 

 

 

December 31, 2016

 

 

 

December 31, 2015

 

 

 

 

 

 

 

 

 

Gross

 

 

 

 

 

 

 

Gross

 

 

 

 

 

Estimated

 

 

 

Unrealized

 

 

 

Estimated

 

 

 

Unrealized

 

 

 

 

 

Fair Value

 

 

 

Losses

 

 

 

Fair Value

 

 

 

Losses

 

 

 

(in thousands)

 

U.S. treasuries

 

$

20,002

 

$

(5

)

$

64,922

 

$

(23

)

Government agency securities

 

10,012

 

(8

)

 

 

Corporate debt

 

13,774

 

(7

)

3,353

 

(1

)

Total

 

$

43,788

 

$

(20

)

$

68,275

 

$

(24

)

 

At December 31, 2016 and 2015, there were no short-term investments that had been in a continuous loss position for more than 12 months.

 

The maturities of securities classified as available-for-sale at December 31, 2016 were all due in one year or less. Actual maturities may differ from contractual maturities because borrowers may have the right to call or prepay obligations with or without call or prepayment penalties. There were no realized gains or losses for the year ended December 31, 2016. There were no realized losses and minimal realized gains for 2015 and 2014, which were included in “Other, net” in the Consolidated Statements of Operations.

 

Cost Method Investment

 

The Company has an ownership interest of less than 20% in a non-marketable investment, Kateeva, Inc. (“Kateeva”). The Company does not exert significant influence over Kateeva and therefore the investment is carried at cost. The carrying value of the investment was $21.0 million at December 31, 2016 and 2015. The investment is included in “Other assets” on the Consolidated Balance Sheet. The investment is subject to a periodic impairment review; as there are no open-market valuations, the impairment analysis requires judgment. The analysis includes assessments of Kateeva’s financial condition, the business outlook for its products and technology, its projected results and cash flow, business valuation indications from recent rounds of financing, the likelihood of obtaining subsequent rounds of financing, and the impact of equity preferences held by Veeco relative to other investors. Fair value of the investment is not estimated unless there are identified events or changes in circumstances that could have a significant adverse effect on the fair value of the investment. No such events or circumstances are present.

 

Note 5 — Business Combinations

 

PSP

 

On December 4, 2014 the Company acquired 100% of Solid State Equipment, LLC (“SSEC”) and rebranded the business Veeco Precision Surface Processing (“PSP”). The results of PSP operations have been included in the consolidated financial statements since the date of acquisition. PSP designs and develops wafer wet processing capabilities. Target market applications include semiconductor advanced packaging (including 2.5D and 3D ICs), micro-electromechanical systems (“MEMS”), compound semiconductor (RF, power electronics, LED and others), data storage, photomask, and flat panel displays. PSP further extends the Company’s penetration in the compound semiconductor and MEMS markets and represents the Company’s entry into the advanced packaging market.

 

The acquisition date fair value of the consideration totaled $145.5 million, net of cash acquired, which consisted of the following:

 

F-19



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Notes to Consolidated Financial Statements (Continued)

 

 

 

Acquisition Date

 

(December 4, 2014)

 

 

 

(in thousands)

 

Amount paid, net of cash acquired

 

$

145,382

 

Working capital adjustment

 

88

 

Acquisition date fair value

 

$

145,470

 

 

The following table summarizes the estimated fair values of the assets acquired and liabilities assumed at the acquisition date. The Company utilized third-party valuations to estimate the fair value of certain of the acquired tangible and intangible assets:

 

 

 

Acquisition Date

 

(December 4, 2014)

 

 

 

(in thousands)

 

Accounts receivable

 

$

9,383

 

Inventory

 

13,812

 

Other current assets

 

463

 

Property, plant, and equipment

 

6,912

 

Intangible assets

 

79,810

 

Total identifiable assets acquired

 

110,380

 

 

 

 

 

Accounts payable and accrued expenses

 

6,473

 

Customer deposits

 

6,039

 

Deferred tax liability, net

 

2,705

 

Other

 

1,089

 

Total liabilities assumed

 

16,306

 

 

 

 

 

Net identifiable assets acquired

 

94,074

 

Goodwill

 

51,396

 

Net assets acquired

 

$

145,470

 

 

The gross contractual value of the acquired accounts receivable was approximately $10.5 million. The fair value of the accounts receivables is the amount expected to be collected by the Company. Goodwill generated from the acquisition is primarily attributable to expected synergies from future growth and strategic advantages provided through the expansion of product offerings as well as assembled workforce. Approximately 80% of the value of the goodwill is deductible for income tax purposes.

 

During 2015, the Company finalized the purchase accounting, including taxes and the working capital adjustment under the purchase agreement. Based on the final adjustments, net working capital increased $0.7 million, goodwill decreased $0.1 million, deferred tax liabilities decreased $0.2 million, and a lease-related asset retirement obligation of $0.8 million was recognized.

 

F-20



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Notes to Consolidated Financial Statements (Continued)

 

The classes of intangible assets acquired and the estimated useful life of each class is presented in the table below:

 

 

 

Acquisition Date

 

 

 

(December 4, 2014)

 

 

 

Amount

 

Useful life

 

 

 

(in thousands)

 

 

 

Technology

 

$

39,950

 

10 years

 

Customer relationships

 

34,310

 

14 years

 

Backlog

 

3,340

 

6 months

 

Non-compete agreements

 

1,130

 

2 years

 

Trademark and tradenames

 

1,080

 

1 year

 

Intangible assets acquired

 

$

79,810

 

 

 

 

The Company determined the estimated fair value of the identifiable intangible assets based on various factors including: cost, discounted cash flow, income method, loss-of-revenue/income method, and relief-from-royalty method in determining the purchase price allocation.

 

During 2014, the Company recognized $3.2 million of acquisition related costs that are included in “Selling, general, and administrative” in the Consolidated Statements of Operations.

 

The amounts of revenue and income (loss) from continuing operations before income taxes of PSP included in the Company’s consolidated statement of operations from the acquisition date (December 4, 2014) to the period ending December 31, 2014 are as follows:

 

 

 

Total

 

 

 

(in thousands)

 

Revenue

 

$

7,906

 

Loss from operations before income taxes

 

$

(3,011

)

 

The following represents the unaudited pro forma Consolidated Statements of Operations as if PSP had been included in the Company’s consolidated results for the periods indicated. These amounts have been calculated after applying the Company’s accounting policies to material amounts and also adjusting the results of PSP to reflect the additional amortization and depreciation that would have been expensed assuming the fair value adjustments to the acquired assets had been applied on January 1, 2013:

 

 

 

December 31,

 

 

 

2014

 

 

 

(in thousands)

 

Revenue

 

$

447,089

 

Loss from operations before income taxes

 

$

(68,715

)

 

Note 6 — Goodwill and Intangible Assets

 

Goodwill represents the future economic benefits arising from assets acquired in a business combination that are not individually identified and separately recognized. The following table presents the changes in goodwill balances during the years indicated:

 

F-21



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Notes to Consolidated Financial Statements (Continued)

 

 

 

Gross carrying

 

Accumulated

 

 

 

 

 

 

 

amount

 

 

 

impairment

 

 

 

Net amount

 

 

 

 

 

(in thousands)

 

 

 

Balance at December 31, 2014

 

$

238,158

 

$

123,199

 

$

114,959

 

Purchase price adjustments

 

(51

)

 

(51

)

Balance at December 31, 2015 and 2016

 

$

238,107

 

$

123,199

 

$

114,908

 

 

The Company performed its annual goodwill impairment test during the year ended December 31, 2016. The fair value of the Company’s reporting unit exceeded the carrying amount and therefore goodwill was not impaired. In the future, a significant decline in the market price of the Company’s common stock could indicate a decline in the fair value of the Company’s reporting unit such that goodwill becomes impaired.

 

During 2014, the Company successfully demonstrated its FAST-ALD technology for flexible OLED encapsulation. But, subsequent to the Company’s annual goodwill impairment test in 2014, the incumbent deposition technology had progressed to satisfy current market requirements, which required an additional impairment test to be performed in the fourth quarter of 2014. After estimating the fair value of significant tangible and intangible long-lived assets related to the Atomic Layer Deposition (“ALD”) business, the Company recorded non-cash impairment charges of $28.0 million related to goodwill and $25.9 million related to other long-lived assets, including $17.4 million related to customer relationships, $4.8 million related to in-process research and development, and $3.6 million related to certain tangible assets.

 

During 2016, the Company decided to further significantly reduce future investments in its ALD technology development and, as a result, recorded non-cash impairment charges of its remaining ALD assets, including $54.3 million for the full impairment of the intangible purchased ALD technology. The impairment charges were based on projected cash flows that required the use of unobservable inputs.

 

The components of purchased intangible assets were as follows:

 

 

 

 

 

 

 

December 31, 2016

 

 

 

December 31, 2015

 

 

 

Weighted

 

 

 

 

 

 

 

Accumulated

 

 

 

 

 

 

 

 

 

 

 

Accumulated

 

 

 

 

 

 

 

Average Remaining

 

 

 

Gross

 

 

 

Amortization

 

 

 

 

 

 

 

Gross

 

 

 

Amortization

 

 

 

 

 

 

 

Amortization

 

 

 

Carrying

 

 

 

and

 

 

 

Net

 

 

 

Carrying

 

 

 

and

 

 

 

Net

 

 

 

Period

 

 

 

Amount

 

 

 

Impairment

 

 

 

Amount

 

 

 

Amount

 

 

 

Impairment

 

 

 

Amount

 

 

 

(in years)

 

(in thousands)

 

Technology

 

7.3

 

$

149,198

 

$

113,904

 

$

35,294

 

$

222,358

 

$

120,496

 

$

101,862

 

Customer relationships

 

11.9

 

47,885

 

28,659

 

19,226

 

47,885

 

22,470

 

25,415

 

Trademarks and tradenames

 

4.3

 

2,590

 

1,948

 

642

 

2,730

 

1,937

 

793

 

Indefinite-lived trademark

 

 

2,900

 

 

2,900

 

2,900

 

 

2,900

 

Other

 

2.9

 

2,026

 

1,710

 

316

 

6,241

 

5,537

 

704

 

Total

 

8.9

 

$

204,599

 

$

146,221

 

$

58,378

 

$

282,114

 

$

150,440

 

$

131,674

 

 

Other intangible assets primarily consist of patents, licenses, customer backlog, and non-compete agreements.

 

F-22



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Notes to Consolidated Financial Statements (Continued)

 

Based on the intangible assets recorded at December 31, 2016, and assuming no subsequent additions to or impairment of the underlying assets, the remaining estimated annual amortization expense is expected to be as follows:

 

 

 

 

 

Amortization

 

 

 

(in thousands)

 

2017

 

$

11,470

 

2018

 

9,893

 

2019

 

8,608

 

2020

 

7,530

 

2021

 

5,491

 

Thereafter

 

12,486

 

Total

 

$

55,478

 

 

Note 7 — Inventories

 

Inventories are stated at the lower of cost or net realizable value using standard costs that approximate actual costs on a first-in, first-out basis. Inventories consist of the following:

 

 

 

 

December 31,

 

 

 

 

2016

 

 

 

2015

 

 

 

(in thousands)

 

Materials

 

$

46,457

 

$

42,373

 

Work-in-process

 

25,250

 

30,327

 

Finished goods

 

5,356

 

4,769

 

Total

 

$

77,063

 

$

77,469

 

 

Note 8 — Property, Plant, and Equipment and Assets Held for Sale

 

Property and equipment, net, consist of the following:

 

 

 

December 31,

 

Average

 

 

 

2016

 

2015

 

Useful Life

 

 

 

(in thousands)

 

 

 

Land

 

$

5,669

 

$

9,592

 

N/A

 

Building and improvements

 

50,814

 

54,622

 

10-40 years

 

Machinery and equipment(1)

 

99,370

 

110,075

 

3-10 years

 

Leasehold improvements

 

3,652

 

5,554

 

3-7 years

 

Gross property, plant and equipment

 

159,505

 

179,843

 

 

 

Less: accumulated depreciation and amortization

 

98,859

 

100,253

 

 

 

Net property, plant and equipment

 

$

60,646

 

$

79,590

 

 

 

 

(1) Machinery and equipment also includes software, furniture and fixtures

 

Depreciation expense was $13.4 million, $12.2 million, and $11.4 million for the years ended December 31, 2016, 2015, and 2014, respectively. During 2016, the Company decided to significantly reduce future investments in its ALD technology development and, as a result, recorded a charge for impairment of its ALD assets, including a $3.3 million impairment of property, plant, and equipment.

 

As part of the Company’s efforts to reduce costs, enhance efficiency and streamline operations, the Company removed certain lab equipment that is no longer required and recorded a non-cash impairment charge of $6.2 million for the year ended December 31, 2016. Additionally, as part of that initiative, the Company listed its two facilities in South Korea for

 

F-23



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Notes to Consolidated Financial Statements (Continued)

 

sale. When each facility was reclassified as held for sale, the Company determined that the carrying values of the buildings exceeded their fair market values, less cost to sell, and recorded net impairment charges of $4.5 million for the year ended December 31, 2016. Both facilities were sold before the end of 2016 at prices that approximated the revised carrying values.

 

The Company also has a property in St. Paul, Minnesota that was classified as held for sale in 2014. At that time, the Company determined that the carrying value of this property exceeded the fair value, less cost to sell, and recorded an impairment charge of approximately $1.9 million for the year ended December 31, 2014. The Company continued to classify the property as held for sale throughout 2015. In early 2016, the Company recorded an additional impairment charge of approximately $1.2 million to reflect changes in market conditions that impacted the fair value of the assets. The Company continues to actively market the property for sale. However, the Company can no longer make the assessment that the assets will be sold within the next twelve months. As such, the land and building no longer meet the criteria to be classified as assets held for sale on the balance sheet and were reclassified to “Property, plant and equipment, net” in the Consolidated Balance Sheets at its carrying value of $3.6 million, which approximates its fair market value.

 

During the year ended December 31, 2014, the Company classified certain property, plant, and equipment related to the Company’s research and demonstration labs in Asia as held for sale, and recorded an impairment charge of approximately $1.6 million. During the year ended December 31, 2015, the Company sold these assets for $1.0 million, which approximated carrying value.

 

Finally, during the year ended December 31, 2014, the Company recognized additional asset impairment charges of $0.7 million relating to assets that were abandoned during the year.

 

Note 9 — Accrued Expenses and Other Liabilities

 

The components of accrued expenses and other current liabilities were as follows:

 

 

 

 

 

December 31,

 

 

 

 

 

 

 

 

 

2016

 

 

 

2015

 

 

 

 

 

 

 

(in thousands)

 

 

 

 

 

Payroll and related benefits

 

$

18,780

 

$

30,917

 

 

 

 

 

Warranty

 

4,217

 

8,159

 

 

 

 

 

Professional fees

 

1,827

 

2,224

 

 

 

 

 

Installation

 

1,382

 

1,110

 

 

 

 

 

Sales, use, and other taxes

 

1,282

 

1,132

 

 

 

 

 

Restructuring liability

 

1,796

 

824

 

 

 

 

 

Other

 

3,917

 

5,027

 

 

 

 

 

Total

 

$

33,201

 

$

49,393

 

 

 

 

 

 

Customer deposits and deferred revenue

 

Customer deposits totaled $22.2 million and $28.2 million at December 31, 2016 and 2015, respectively, which are included in “Customer deposits and deferred revenue” in the Consolidated Balance Sheets.

 

Note 10 — Restructuring Charges

 

During 2016, additional accruals were recognized and payments made related to previous years’ restructuring initiatives. In addition, in 2016, the Company undertook additional restructuring activities as part of its initiative to streamline operations, enhance efficiency, and reduce costs. As a result of these actions, the Company notified approximately 50 employees of their termination from the Company and recorded restructuring charges related to these actions of $4.4 million, consisting of $3.3 million of personnel severance and related costs and $1.1 million of facility closing costs. In

 

F-24



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Notes to Consolidated Financial Statements (Continued)

 

addition, the Company decided to significantly reduce future investments in its ALD technology development, which impacted approximately 25 additional employees. As a result, the Company recorded personnel severance and related restructuring charges of $1.2 million. Over the next year, the Company expects to incur additional restructuring costs of $2 million to $5 million as it finalizes all of these activities.

 

During 2015, charges of $2.7 million were recognized and payments made related to the 2014 closing of the Ft. Collins, Colorado and Camarillo, California facilities. In 2015, the Company announced the closing of its Hyeongok-ri, South Korea facility and reduced the workforce, including 23 employees whose positions were eliminated, resulting in restructuring costs of $1.1 million. And in an effort to better align the Company’s cost structure with the then recently observed weakness in the LED market, the Company incurred $0.9 million to reduce spending primarily through the reduction of 16 employees and 12 temporary staff.

 

During 2014, the Company announced the closing of its Ft. Collins, Colorado and Camarillo, California facilities. Business activities formerly conducted at these sites were transferred to the Company’s Plainview, New York facility, and the Company recorded $0.4 million of facility closing costs. The Company also took additional measures to improve profitability and notified 93 employees of their termination from the Company and recorded $4.0 million of personnel severance and related costs. These actions were substantially complete at the end of 2014.

 

The following table shows the amounts incurred and paid for restructuring activities during the years ended December 31, 2016, 2015, and 2014 and the remaining accrued balance of restructuring costs at December 31, 2016, which is included in Accrued expenses and other current liabilities” in the Consolidated Balance Sheets:

 

 

 

 

 

Personnel

 

 

 

 

 

 

 

 

 

 

 

 

 

Severance and

 

 

 

Facility

 

 

 

 

 

 

 

 

 

Related Costs

 

 

 

Related Costs

 

 

 

Total

 

 

 

 

 

(in thousands)

 

 

 

Balance at December 31, 2013

 

$

533

 

$

 

$

533

 

Provision

 

4,012

 

382

 

4,394

 

Payments

 

(3,117

)

(382

)

(3,499

)

Balance at December 31, 2014

 

1,428

 

 

1,428

 

Provision

 

3,513

 

1,166

 

4,679

 

Payments

 

(4,117

)

(1,166

)

(5,283

)

Balance at December 31, 2015

 

824

 

 

824

 

Provision

 

4,544

 

1,098

 

5,642

 

Changes in estimate

 

(2

)

 

(2

)

Payments

 

(3,570

)

(1,098

)

(4,668

)

Balance at December 31, 2016

 

$

1,796

 

$

 

$

1,796

 

 

Note 11 — Commitments and Contingencies

 

Warranty

 

Warranties are typically valid for one year from the date of system final acceptance, and the Company estimates the costs that may be incurred under the warranty. Estimated warranty costs are determined by analyzing specific product and historical configuration statistics and regional warranty support costs and is affected by product failure rates, material usage, and labor costs incurred in correcting product failures during the warranty period. Unforeseen component failures or exceptional component performance can also result in changes to warranty costs.

 

Changes in the Company’s product warranty reserves were as follows:

 

F-25



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Notes to Consolidated Financial Statements (Continued)

 

 

 

 

 

December 31,

 

 

 

 

 

2016

 

 

 

2015

 

 

 

2014

 

 

 

(in thousands)

 

Balance, beginning of the year

 

$

8,159

 

$

5,411

 

$

5,662

 

Addition for new warranties issued

 

3,916

 

7,873

 

3,484

 

Addition from PSP acquisition

 

 

 

809

 

Settlements

 

(6,433

)

(3,551

)

(3,802

)

Changes in estimate

 

(1,425

)

(1,574

)

(742

)

Balance, end of the year

 

$

4,217

 

$

8,159

 

$

5,411

 

 

Minimum Lease Commitments

 

Minimum lease commitments at December 31, 2016 for property and equipment under operating lease agreements (exclusive of renewal options) are payable as follows:

 

 

 

Operating

 

 

 

Leases

 

Payments due by period:

 

(in thousands)

 

2017

 

$

3,281

 

2018

 

2,292

 

2019

 

1,900

 

2020

 

1,592

 

2021

 

1,203

 

Thereafter

 

3,605

 

Total

 

$

13,873

 

 

Lease expense was $2.5 million, $2.3 million, and $2.3 million for the years ended December 31, 2016, 2015, and 2014, respectively. In addition, the Company is obligated under such leases for certain other expenses, including real estate taxes and insurance.

 

Legal Proceedings

 

Veeco and certain other parties were named as defendants in a lawsuit filed on April 25, 2013 in the Superior Court of California, County of Sonoma. The plaintiff in the lawsuit, Patrick Colbus, sought unspecified damages and asserted claims that he suffered burns and other injuries while cleaning a molecular beam epitaxy system alleged to have been manufactured by Veeco. The lawsuit alleged, among other things, that the molecular beam epitaxy system was defective and that Veeco failed to adequately warn of the potential risks of the system. In April 2016, the parties settled the lawsuit, without any admission of wrongdoing. The settlement amount was fully covered by Veeco’s insurance.

 

The Company is involved in various other legal proceedings arising in the normal course of business. The Company does not believe that the ultimate resolution of these matters will have a material adverse effect on its consolidated financial position, results of operations, or cash flows.

 

Concentrations of Credit Risk

 

The Company depends on purchases from its ten largest customers, which accounted for 73% and 75% of net accounts receivable at December 31, 2016 and 2015, respectively.

 

Customers who accounted for more than 10% of net accounts receivable or net sales are as follows:

 

F-26



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Notes to Consolidated Financial Statements (Continued)

 

 

 

Accounts Receivable

 

Net Sales

 

 

 

 

 

 

 

Year ended December 31,

 

For the Year Ended December 31,

Customer

 

2016

 

2015

 

2016

 

2015

 

2014

Customer A

 

23%

 

*

 

13%

 

*

 

*

Customer B

 

17%

 

*

 

*

 

*

 

*

Customer C

 

*

 

23%

 

*

 

*

 

*

Customer D

 

*

 

*

 

*

 

20%

 

*

Customer E

 

*

 

*

 

*

 

12%

 

*

Customer F

 

*

 

*

 

*

 

*

 

15%

Customer G

 

*

 

*

 

*

 

*

 

11%

 

 

 

 

* Less than 10% of aggregate accounts receivable or net sales

 

The Company manufactures and sells its products to companies in different geographic locations. Refer to Note 18, “Segment Reporting and Geographic Information,” for additional information. In certain instances, the Company requires deposits from its customers for a portion of the sales price in advance of shipment and performs periodic credit evaluations on its customers. Where appropriate, the Company requires letters of credit on certain non-U.S. sales arrangements. Receivables generally are due within 30 to 90 days from the date of invoice.

 

Suppliers

 

The Company outsources certain functions to third parties, including the manufacture of its MOCVD systems. While the Company primarily relies on one supplier for the manufacturing of these systems, the Company maintains a minimum level of internal manufacturing capability for these systems. The failure of the Company’s present suppliers to meet their contractual obligations under its supply arrangements and the Company’s inability to make alternative arrangements or resume the manufacture of these systems could have a material adverse effect on the Company’s revenues, profitability, cash flows, and relationships with its customers.

 

In addition, certain of the components and sub-assemblies included in the Company’s products are obtained from a single source or a limited group of suppliers. The Company’s inability to develop alternative sources, if necessary, could result in a prolonged interruption in supply or a significant increase in the price of one or more components, which could adversely affect the Company’s operating results.

 

The Company had deposits with its suppliers of $7.8 million and $14.6 million at December 31, 2016 and 2015, respectively, that were included in “Prepaid expenses and other current assets” on the Consolidated Balance Sheets.

 

Purchase Commitments

 

The Company had purchase commitments of $72.6 million at December 31, 2016, all of which will come due within one year. Purchase commitments are primarily for inventory used in manufacturing products. The Company have $7.8 million of offsetting supplier deposits against these purchase commitments as of December 31, 2016.

 

Bank Guarantees

 

The Company has bank guarantees and letters of credit issued by a financial institution on its behalf as needed. At December 31, 2016, outstanding bank guarantees and letters of credit totaled $5.0 million, and unused bank guarantees and letters of credit of $59.4 million were available to be drawn upon.

 

F-27



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Notes to Consolidated Financial Statements (Continued)

 

Note 12 — Debt

 

As of December 31, 2016 and 2015, debt consists of a mortgage note payable with a carrying value of $1.2 million and $1.5 million, respectively. See Note 20, “Subsequent Events,” for information concerning the Company’s issuance of $345.0 million in aggregate principal amount of 2.7% convertible senior unsecured notes due 2023 in January 2017. The mortgage note payable is secured by certain land and buildings with a carrying value of $3.3 million at December 31, 2016 and 2015. The annual interest rate on the mortgage is 7.91%, and the final payment is due on January 1, 2020. The Company determined the mortgage is a Level 3 liability in the fair-value hierarchy and estimated its fair value as $1.2 million and $1.6 million at December 31, 2016 and 2015, respectively, using a discounted cash flow model. Payments due under the note are as follows:

 

 

 

 

Total

 

 

 

 

(in thousands)

 

2017

 

 

368

 

2018

 

 

398

 

2019

 

 

428

 

Total

 

 

1,194

 

Less current portion

 

 

368

 

Total (less current maturities)

 

 

$

826

 

 

See Note 20, “Subsequent Events,” for additional information regarding the Company’s Convertible Notes.

 

Note 13 — Derivative Financial Instruments

 

The Company is exposed to financial market risks arising from changes in currency exchange rates. Changes in currency exchange rate changes could affect the Company’s foreign currency denominated monetary assets and liabilities and forecasted cash flows. The Company entered into monthly forward derivative contracts with the intent of mitigating a portion of this risk. The Company only used derivative financial instruments in the context of hedging and not for speculative purposes and had not designated its foreign exchange derivatives as hedges. Accordingly, changes in fair value from these contracts were recorded as “Other, net” in the Company’s Consolidated Statements of Operations. The Company executed derivative transactions with highly rated financial institutions to mitigate counterparty risk.

 

The Company did not have any outstanding derivative contracts at December 31, 2016 and 2015. The following table shows the gains and (losses) from currency exchange derivatives during the years ended December 31, 2016, 2015, and 2014, which are included in “Other, net” in the Consolidated Statements of Operations:

 

 

 

 

Year ended December 31,

 

 

 

 

2016

 

 

 

2015

 

 

 

2014

 

 

 

 

 

 

 

 

(in thousands)

 

 

 

 

 

Foreign currency exchange forwards

 

 

$

219

 

 

 

$

 

 

 

$

(89

)

Foreign currency collar

 

 

 

 

 

 

 

 

(457

)

Total

 

 

$

219

 

 

 

$

 

 

 

$

(546

)

 

Note 14 — Stockholders’ Equity

 

Accumulated Other Comprehensive Income

 

The following table presents the changes in the balances of each component of AOCI, net of tax:

 

F-28



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Notes to Consolidated Financial Statements (Continued)

 

 

 

 

 

 

 

 

 

 

 

 

Unrealized

 

 

 

 

 

 

 

 

Foreign Currency

 

 

 

Minimum Pension

 

 

 

Gains (Losses) on
Available for Sale

 

 

 

 

 

 

 

 

Translation

 

 

 

Liability

 

 

 

Securities

 

 

 

Total

 

 

 

 

(in thousands)

 

Balance at December 31, 2013

 

 

$

5,326

 

 

 

$

(736

)

 

 

$

31

 

 

 

$

4,621

 

Other comprehensive income (loss) before reclassifications

 

 

149

 

 

 

(145

)

 

 

51

 

 

 

55

 

Amounts reclassified from AOCI

 

 

(3,142

)

 

 

 

 

 

(65

)

 

 

(3,207

)

Other comprehensive income (loss)

 

 

(2,993

)

 

 

(145

)

 

 

(14

)

 

 

(3,152

)

Balance at December 31, 2014

 

 

2,333

 

 

 

(881

)

 

 

17

 

 

 

1,469

 

Other comprehensive income (loss)

 

 

(87

)

 

 

15

 

 

 

(49

)

 

 

(121

)

Balance at December 31, 2015

 

 

2,246

 

 

 

(866

)

 

 

(32

)

 

 

1,348

 

Other comprehensive income (loss), before reclassifications

 

 

(19

)

 

 

 

 

 

(6

)

 

 

(25

)

Amounts reclassified from AOCI

 

 

(430

)

 

 

866

 

 

 

18

 

 

 

454

 

Other comprehensive income (loss)

 

 

(449

)

 

 

866

 

 

 

12

 

 

 

429

 

Balance at December 31, 2016

 

 

$

1,797

 

 

 

$

 

 

 

$

(20

)

 

 

$

1,777

 

 

The Company did not allocate additional tax expense (benefit) to other comprehensive income (loss) for all years presented as the Company is in a full valuation allowance position such that a deferred tax asset related to amounts recognized in other comprehensive income is not regarded as realizable on a more-likely-than-not basis.

 

During 2016, the Company finalized the process to terminate a defined benefit plan. As a result, the Company reclassified the minimum pension liability of $0.9 million, net of a tax benefit of $0.4 million, from “Accumulated other comprehensive income” in the Consolidated Balance Sheets to “Other, net” in the Consolidated Statements of Operations. Additionally the Company completed its plan to liquidate its ALD subsidiary in Korea. As a result of this liquidation, a cumulative translation gain of $0.4 million was reclassified from “Accumulated other comprehensive income” to “Other, net” in the Consolidated Statements of Operations.

 

During 2015, there were minimal realized gains reclassified from “Accumulated other comprehensive income” in the Consolidated Balance Sheets to “Other, net” in the Consolidated Statements of Operations.

 

Preferred Stock

 

The Board of Directors has authority under the Company’s Certificate of Incorporation to issue shares of preferred stock, par value $0.01, with voting and economic rights to be determined by the Board of Directors. As of December 31, 2016 no preferred shares have been issued.

 

Treasury Stock

 

On October 28, 2015, the Board of Directors authorized the repurchase of up to $100 million of the Company’s outstanding common stock through October 28, 2017. Repurchases are expected to be made from time to time on the open market or in privately negotiated transactions in accordance with applicable federal securities laws. During 2016, the Company purchased 0.7 million shares for $13.0 million. At December 31, 2016, $22.3 million of the $100 million had been utilized.

 

The Company records treasury stock purchases under the cost method using the first-in, first-out (FIFO) method. Upon reissuance of treasury stock, amounts in excess of the acquisition cost are credited to additional paid-in capital. If the Company reissues treasury stock at an amount below its acquisition cost and if additional paid-in capital associated with

 

F-29



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Notes to Consolidated Financial Statements (Continued)

 

prior treasury stock transactions is insufficient to cover the difference between the acquisition cost and the reissue price, this difference is charged to accumulated deficit.

 

Note 15 — Stock Plans

 

Share-based incentive awards are provided to employees under the terms of the Company’s equity incentive compensation plans (the “Plans”), which are administered by the Compensation Committee of the Board of Directors. The 2010 Plan was approved by the Company’s shareholders. The Company’s employees, non-employee directors, and consultants are eligible to receive awards under the 2010 Stock Incentive Plan (as amended to date, the “2010 Plan”), which can include non-qualified stock options, incentive stock options, restricted share awards (“RSAs”), restricted share units (“RSUs”), performance share awards (“PSAs”), performance share units (“PSUs”), share appreciation rights, dividend equivalent rights, or any combination thereof. The Company settles awards under the Plans with newly issued shares or with shares held in treasury.

 

In 2013, the Board of Directors granted equity awards to certain employees under the Company’s 2013 Inducement Stock Incentive Plan (the “Inducement Plan”). The Company issued 124,500 stock option shares and 87,000 RSUs under this plan. Stock options under this plan vest over a three year period and have a 10-year term, and RSUs under this plan vest over a two or four year period. At December 31, 2013, the Inducement Plan was merged into the 2010 Plan and is considered an inactive plan with no further shares available for grant. At December 31, 2016, there are 77,500 option shares and 5,200 RSUs outstanding under the Inducement Plan.

 

The Company is authorized to issue up to 10.6 million shares under the 2010 Plan, including additional shares authorized under plan amendments approved by shareholders in 2016 and 2013. Option awards are granted with an exercise price equal to the closing price of the Company’s common stock on the trading day prior to the date of grant; option awards generally vest over a three year period and have a seven or ten year term. RSAs and RSUs generally vest over one to five years. Certain option and share awards provide for accelerated vesting if there is a change in control, as defined in the 2010 Plan. At December 31, 2016, there are 1.5 million option shares and 0.6 million RSUs and PSUs outstanding under the 2010 Plan.

 

During 2016 the Company’s Board of Directors approved the 2016 Employee Stock Purchase Plan (the “ESPP Plan”). The Company is authorized to issue up to 750,000 shares under the 2016 ESPP Plan. Under the ESPP Plan, substantially all employees in the U.S. may purchase the Company’s common stock through payroll deductions at a price equal to 85 percent of the lower of the fair market value of the Company’s common stock at the beginning or end of each six-month Offer Period, as defined in the ESPP Plan, and subject to certain limits. The ESPP Plan was approved by the Company’s shareholders.

 

Shares Reserved for Future Issuance

 

At December 31, 2016, the Company has 6.3 million shares reserved to cover exercises of outstanding stock options, vesting of RSUs, and additional grants under the 2010 Plan. At December 31, 2016, the Company has 0.7 million shares reserved to cover future issuances under the ESPP Plan.

 

Share-Based Compensation

 

The Company recognized share-based compensation in the following line items in the Consolidated Statements of Operations for the periods indicated:

 

F-30



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Notes to Consolidated Financial Statements (Continued)

 

 

 

 

 

For the year ended December 31,

 

 

 

 

 

2016

 

 

 

2015

 

 

 

2014

 

 

 

 

 

(in thousands)

 

 

 

 

 

Cost of sales

 

 

 

$

1,956

 

 

 

$

2,495

 

 

 

$

2,456

 

Research and development

 

 

 

3,324

 

 

 

4,031

 

 

 

4,498

 

Selling, general, and administrative

 

 

 

10,433

 

 

 

11,474

 

 

 

11,859

 

Total

 

 

 

$

15,713

 

 

 

$

18,000

 

 

 

$

18,813

 

 

The Company did not realize any tax benefits associated with share-based compensation for the years ended December 31, 2016, 2015, and 2014, due to the full valuation allowance on its U.S. deferred tax assets. See Note 17, “Income Taxes” for additional information. The Company capitalized an insignificant amount of share-based compensation into inventory for the years ended December 31, 2016, 2015, and 2014.

 

Unrecognized share-based compensation costs at December 31, 2016 are summarized below:

 

 

 

 

 

Unrecognized

 

 

 

Weighted

 

 

 

 

 

Share-Based

 

 

 

Average Period

 

 

 

 

 

Compensation

 

 

 

Expected to be

 

 

 

 

 

Costs

 

 

 

Recognized

 

 

 

 

 

(in thousands)

 

 

 

(in years)

 

Stock option awards

 

 

 

$

660

 

 

 

0.6

 

Restricted stock units

 

 

 

3,034

 

 

 

2.0

 

Restricted stock awards

 

 

 

20,669

 

 

 

2.7

 

Performance share units

 

 

 

4,556

 

 

 

2.5

 

Total unrecognized share-based compensation cost

 

 

 

$

28,919

 

 

 

2.5

 

 

Stock Option Awards

 

Stock options are awards issued to employees that entitle the holder to purchase shares of the Company’s stock at a fixed price. At December 31, 2016, options outstanding that have vested and are expected to vest are as follows:

 

 

 

 

 

 

Weighted

 

 

 

 

Number

 

Weighted

 

Average

 

Aggregate

 

 

of

 

Average

 

Remaining

 

Intrinsic

 

 

Shares

 

Exercise Price

 

Contractual Life

 

Value

 

 

 

(in thousands)

 

 

 

 

 

(in years)

 

 

(in thousands)

 

Vested

 

1,449

 

 

$

35.39

 

 

4.9

 

 

$

39

 

Expected to vest

 

127

 

 

32.79

 

 

5.1

 

 

 

Total

 

1,576

 

 

$

35.18

 

 

4.9

 

 

$

39

 

 

The aggregate intrinsic value represents the difference between the option exercise price and $29.15, the closing price of the Company’s common stock on December 30, 2016, the last trading day of the Company’s fiscal year as reported on The NASDAQ Stock Market.

 

Additional information with respect to stock option activity:

 

F-31



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Notes to Consolidated Financial Statements (Continued)

 

 

 

 

 

Weighted

 

 

 

Number of

 

Average

 

 

 

Shares

 

Exercise Price

 

 

 

 

(in thousands)

 

 

 

 

Outstanding at December 31, 2013

 

 

2,598

 

 

$

29.98

 

Granted

 

 

509

 

 

33.05

 

Exercised

 

 

(561

)

 

23.88

 

Expired or forfeited

 

 

(155

)

 

36.22

 

Outstanding at December 31, 2014

 

 

2,391

 

 

31.65

 

Granted

 

 

17

 

 

30.22

 

Exercised

 

 

(192

)

 

12.95

 

Expired or forfeited

 

 

(152

)

 

38.15

 

Outstanding at December 31, 2015

 

 

2,064

 

 

32.91

 

Granted

 

 

 

 

 

Exercised

 

 

(194

)

 

12.18

 

Expired or forfeited

 

 

(294

)

 

34.44

 

Outstanding at December 31, 2016

 

 

1,576

 

 

$

35.18

 

 

The following table summarizes stock option information at December 31, 2016:

 

 

 

Options Outstanding

 

Options Exercisable

 

 

 

 

 

 

Weighted

 

 

 

 

 

 

 

 

 

 

Weighted

 

 

 

 

 

 

 

 

 

Average

 

Weighted

 

 

 

 

Aggregate

 

Average

 

Weighted

 

Range of

 

 

 

 

Remaining

 

Average

 

 

 

 

Intrinsic

 

Remaining

 

Average

 

Exercise Prices

 

Shares

 

Contractual Life

 

Exercise Price

 

Shares

 

Value

 

Contractual Life

 

Exercise Price

 

 

 

(in thousands)

 

(in years)

 

 

 

(in thousands)

 

(in thousands)

 

(in years)

 

 

 

 

$20.00 – $30.00

 

 

32

 

 

5.8

 

 

$

28.18

 

 

29

 

 

$

39

 

 

5.9

 

 

$

28.04

 

$30.01 – $40.00

 

 

1,336

 

 

5.1

 

 

33.09

 

 

1,212

 

 

 

 

5.1

 

 

33.12

 

$40.01 – $50.00

 

 

73

 

 

2.7

 

 

45.93

 

 

73

 

 

 

 

2.7

 

 

45.96

 

$50.01 – $60.00

 

 

135

 

 

4.4

 

 

51.70

 

 

135

 

 

 

 

4.4

 

 

51.70

 

 

 

 

1,576

 

 

4.9

 

 

$

35.18

 

 

1,449

 

 

$

39

 

 

4.9

 

 

$

35.39

 

 

The fair value of each option is estimated on the date of grant using the Black-Scholes option pricing model.

 

Estimates of fair value are not intended to predict actual future events or the value ultimately realized by employees who receive equity awards. No options were granted in 2016. The weighted average estimated values of employee stock option grants as well as the weighted average assumptions that were used in calculating such values during fiscal years 2015 and 2014 were based on estimates at the date of grant as follows:

 

F-32



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Notes to Consolidated Financial Statements (Continued)

 

 

 

Year ended December 31,

 

 

 

2015

 

2014

 

Weighted average fair value

 

  $

10.58

 

  $

11.58

 

Dividend yield

 

0%

 

0%

 

Expected volatility factor(1)

 

44%

 

44%

 

Risk-free interest rate(2)

 

1.18%

 

1.19%

 

Expected life (in years)(3)

 

3.9

 

3.9

 

 

 

 

 

 

(1)

Expected volatility is measured using historical daily price changes of the Company’s stock over the respective expected term of the options and the implied volatility derived from the market prices of the Company’s traded options.

 

 

(2)

The risk-free rate for periods within the contractual term of the stock options is based on the U.S. Treasury yield curve in effect at the time of grant.

 

 

(3)

The expected life is the number of years the Company estimates that options will be outstanding prior to exercise. The Company’s computation of expected life was determined using a lattice-based model incorporating historical post vest exercise and employee termination behavior.

 

The following table summarizes information on options exercised for the periods indicated:

 

 

 

Year ended December 31,

 

 

 

2016

 

2015

 

2014

 

 

 

(in thousands)

 

Cash received from options exercised

 

  $

494

 

  $

2,233

 

  $

12,056

 

Intrinsic value of options exercised

 

  $

1,165

 

  $

2,089

 

  $

8,390

 

 

RSAs, RSUs, PSAs, PSUs

 

RSAs are stock awards issued to employees that are subject to specified restrictions and a risk of forfeiture. RSUs are stock awards issued to employees that entitle the holder to receive shares of common stock as the awards vest. PSAs and PSUs are awards that result in a payment to a grantee in shares of common stock if certain performance goals and vesting criteria are achieved. These awards typically vest over one to five years and vesting is subject to the grantee’s continued service with the Company and, in the case of performance awards, meeting the performance condition. The fair value of the awards is determined and fixed based on the closing price of the Company’s common stock on the trading day prior to the date of grant.

 

The following table summarizes the activity of these awards:

 

F-33



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Notes to Consolidated Financial Statements (Continued)

 

 

 

 

 

Weighted

 

 

 

 

 

Average

 

 

 

Number of

 

Grant Date

 

 

 

Shares

 

Fair Value

 

 

 

(in thousands)

 

 

 

Outstanding - December 31, 2013

 

 

1,158

 

 

$

34.93

 

Granted

 

 

395

 

 

34.18

 

Released

 

 

(183

)

 

38.65

 

Forfeited

 

 

(133

)

 

33.66

 

Outstanding - December 31, 2014

 

 

1,237

 

 

34.27

 

Granted

 

 

672

 

 

30.33

 

Released

 

 

(389

)

 

35.65

 

Forfeited

 

 

(122

)

 

34.46

 

Outstanding - December 31, 2015

 

 

1,398

 

 

 

31.97

 

Granted

 

 

1,166

 

 

17.59

 

Released

 

 

(349

)

 

32.73

 

Forfeited

 

 

(266

)

 

27.31

 

Outstanding - December 31, 2016

 

 

1,949

 

 

$

23.85

 

 

For performance awards, the final number of shares earned will vary depending on the achievement of the actual results relative to the performance targets. Each performance award is included in the table above at the grant date target share amount until the end of the performance period (if not previously forfeited). The total fair value of shares that vested during the years ended December 31, 2016, 2015, and 2014 was $7.5 million, $9.6 million, and $6.2 million, respectively.

 

Employee Stock Purchase Plan

 

The Company received cash proceeds of $1.2 million and issued 83,000 shares under the ESPP Plan for the year ended December 31, 2016. The weighted average estimated values of employee purchase rights as well as the weighted average assumptions that were used in calculating such values during fiscal year 2016 were based on estimates at the date of grant as follows:

 

 

 

 

Year ended December 31,

 

 

 

2016

 

Weighted average fair value

 

  $

4.45

 

Dividend yield

 

0%

 

Expected volatility factor(1)

 

43%

 

Risk-free interest rate(2)

 

0.35%

 

Expected life (in years)(3)

 

0.5

 

 

 

 

 

 

(1)

Expected volatility is measured using historical daily price changes of the Company’s stock over the respective expected term of the options and the implied volatility derived from the market prices of the Company’s traded options.

 

 

(2)

The risk-free rate for periods within the contractual term of the purchase rights is based on the U.S. Treasury yield curve in effect at the time of grant.

 

 

(3)

The expected life is the length of time, in years, that the purchase rights will be outstanding.

 

F-34



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Notes to Consolidated Financial Statements (Continued)

 

Note 16 — Retirement Plans

 

The Company maintains a defined contribution plan for the benefit of its U.S. employees. The plan is intended to be tax qualified and contains a qualified cash or deferred arrangement as described under Section 401(k) of the Internal Revenue Code. Eligible participants may elect to contribute a percentage of their base compensation, and the Company may make matching contributions, generally equal to fifty cents for every dollar employees contribute, up to the lesser of three percent of the employee’s eligible compensation or three percent of the maximum the employee is permitted to contribute under then current Internal Revenue Code limitations. Generally, the plan calls for vesting in the Company contributions over the initial five years of a participant’s employment. The Company recognized costs associated with these plans of approximately $2.6 million, $2.5 million, and $1.9 million for the years ended December 31, 2016, 2015, and 2014, respectively.

 

During 2016, the Company finalized the process to terminate a defined benefit plan it had acquired in the year 2000. The plan had been frozen as of September 30, 1991, and no further benefits had been accrued by participants since that date. In connection with the termination, responsibility for the payment of benefits under the plan was transferred to an insurance company. As a result, the Company reclassified the minimum pension liability of $0.9 million, net of a tax benefit of $0.4 million, from “Accumulated other comprehensive income” in the Consolidated Balance Sheets to “Other, net” in the Consolidated Statements of Operations.

 

Note 17 — Income Taxes

 

The amounts of income (loss) before income taxes attributable to domestic and foreign operations were as follows:

 

 

 

 

Year ended December 31,

 

 

 

2016

 

2015

 

2014

 

 

 

 

 

 

(in thousands)

 

 

 

 

Domestic

 

 

$

(123,021

)

 

$

(53,553

)

 

$

(95,195

)

Foreign

 

 

3,577

 

 

30,907

 

 

16,841

 

Total

 

 

$

(119,444

)

 

$

(22,646

)

 

$

(78,354

)

 

Significant components of the expense (benefit) for income taxes consisted of the following:

 

 

 

 

Year ended December 31,

 

 

 

2016

 

2015

 

2014

 

 

 

 

 

 

(in thousands)

 

 

 

 

Current:

 

 

 

 

 

 

 

 

 

 

Federal

 

 

$

 

 

$

139

 

 

$

(2,464

)

Foreign

 

 

1,937

 

 

6,952

 

 

2,325

 

State and local

 

 

(111

)

 

(407

)

 

55

 

Total current expense (benefit) for income taxes

 

 

1,826

 

 

6,684

 

 

(84

)

Deferred:

 

 

 

 

 

 

 

 

 

 

Federal

 

 

1,459

 

 

2,104

 

 

(11,230

)

Foreign

 

 

(646

)

 

516

 

 

(291

)

State and local

 

 

127

 

 

28

 

 

191

 

Total deferred expense (benefit) for income taxes

 

 

940

 

 

2,648

 

 

(11,330

)

Total expense (benefit) for income taxes

 

 

$

2,766

 

 

$

9,332

 

 

$

(11,414

)

 

The income tax expense was reconciled to the tax expense computed at the U.S. federal statutory tax rate as follows:

 

F-35



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Notes to Consolidated Financial Statements (Continued)

 

 

 

 

Year ended December 31,

 

 

 

2016

 

2015

 

2014

 

 

 

 

 

 

(in thousands)

 

 

 

 

Income tax expense (benefit) at U.S. statutory rates

 

 

$

(41,806

)

 

$

(7,926

)

 

$

(27,424

)

State taxes, net of U.S. federal impact

 

 

(1,963

)

 

(1,607

)

 

(662

)

Effect of international operations

 

 

8,849

 

 

(7,659

)

 

(6,160

)

Research and development tax credit

 

 

(801

)

 

(1,628

)

 

(1,935

)

Net change in valuation allowance

 

 

50,520

 

 

23,655

 

 

27,156

 

Change in accrual for unrecognized tax benefits

 

 

(1,700

)

 

4,876

 

 

(1,940

)

ALD liquidation

 

 

(12,435

)

 

 

 

 

U.S. share-based compensation

 

 

2,133

 

 

 

 

 

Goodwill impairment

 

 

 

 

 

 

9,786

 

Change in contingent consideration

 

 

 

 

 

 

(10,279

)

Worthless stock deduction

 

 

 

 

(2,069

)

 

 

Change in entity tax status

 

 

 

 

904

 

 

 

Other

 

 

(31

)

 

786

 

 

44

 

Total expense (benefit) for income taxes

 

 

$

2,766

 

 

$

9,332

 

 

$

(11,414

)

 

Deferred income taxes reflect the effect of temporary differences between the carrying amounts of assets and liabilities recognized for financial reporting purposes and the amounts recognized for tax purposes. The tax effects of the temporary differences were as follows:

 

 

 

 

December 31,

 

 

 

2016

 

2015

 

 

 

(in thousands)

 

Deferred tax assets: 

 

 

 

 

 

 

 

Inventory valuation

 

 

$

6,681

 

 

$

6,334

 

Net operating losses and credit carry forwards

 

 

54,527

 

 

33,181

 

Credit carry forwards

 

 

24,598

 

 

20,738

 

Warranty and installation accruals

 

 

1,757

 

 

3,022

 

Share-based compensation

 

 

12,624

 

 

12,461

 

Other

 

 

6,778

 

 

5,787

 

Total deferred tax assets

 

 

106,965

 

 

81,523

 

Valuation allowance

 

 

(106,793

)

 

(56,273

)

Net deferred tax assets

 

 

172

 

 

25,250

 

 

 

 

 

 

 

 

 

Deferred tax liabilities: 

 

 

 

 

 

 

 

Purchased intangible assets

 

 

11,071

 

 

32,550

 

Undistributed earnings

 

 

186

 

 

618

 

Depreciation

 

 

69

 

 

1,908

 

Total deferred tax liabilities

 

 

11,326

 

 

35,076

 

Net deferred taxes

 

 

$

(11,154

)

 

$

(9,826

)

 

The Company did not record a provision for U.S. federal income taxes or any additional withholding taxes on unremitted earnings in foreign subsidiaries in the amount of $48.2 million at December 31, 2016, as such amount is permanently reinvested. It is not practicable to determine the hypothetical amount of tax associated with such unremitted earnings if the Company were to assume they were remitted to the U.S. For financial reporting purposes, these balances are determined

 

F-36



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Notes to Consolidated Financial Statements (Continued)

 

as amounts that exceed the tax basis of such investments. The Company has provided U.S. federal income taxes and additional withholding taxes on foreign earnings that are anticipated to be remitted.

 

At December 31, 2016 the Company had U.S. federal net operating loss carryforwards of approximately $137.2 million that will expire between 2034 and 2036, if not utilized. Additionally, $3.5 million of capital losses will expire in 2021. At December 31, 2016 the Company had U.S. foreign tax credit carryforwards of $7.7 million that will expire between 2023 and 2026 and U.S. federal research and development credits of $12.1 million that will expire between 2031 and 2036. The Company also has state and local net operating loss carryforwards of approximately $68.0 million (a net deferred tax asset of $3.5 million net of federal tax benefits and before the valuation allowance) that will expire between 2016 and 2036. In addition, the Company has state credits of $9.9 million some of which are indefinite and others that will expire between 2016 and 2030.

 

The Company makes assessments to estimate if sufficient taxable income will be generated in the future to use existing deferred tax assets. The Company’s cumulative three year loss in its domestic operations led to a full valuation allowance against the Company’s U.S. deferred tax assets in fiscal year 2014, because the Company could not conclude that such amounts are realizable on a more-likely-than-not basis. As the cumulative three year loss continued in 2016, the Company increased the valuation allowance by approximately $50.5 million during the period ended December 31, 2016.

 

The Company amortizes certain indefinite-lived intangible assets for tax purposes, which are not amortizable for financial reporting purposes. The deferred tax liability at December 31, 2016 includes $13.2 million relating to the tax effect of differences between financial reporting and tax bases of intangible assets that are not expected to reverse within the Company’s net operating loss carryforward period.

 

A roll-forward of the Company’s uncertain tax positions for all U.S. federal, state, and foreign tax jurisdictions was as follows:

 

 

 

 

December 31,

 

 

 

 

2016

 

 

 

2015

 

 

 

2014

 

 

 

 

(in thousands)

 

Balance at beginning of year

 

 

$

9,152

 

 

 

$

4,276

 

 

 

$

6,228

 

Additions for tax positions related to current year

 

 

1,038

 

 

 

5,596

 

 

 

244

 

Additions for tax positions related to prior years

 

 

233

 

 

 

143

 

 

 

199

 

Reductions for tax positions related to prior years

 

 

(2,826

)

 

 

 

 

 

(2,345

)

Reductions due to the lapse of the statute of limitations

 

 

(39

)

 

 

(642

)

 

 

(38

)

Settlements

 

 

(106

)

 

 

(221

)

 

 

(12

)

Balance at end of year

 

 

$

7,452

 

 

 

$

9,152

 

 

 

$

4,276

 

 

If the amount of unrecognized tax benefits at December 31, 2016 were recognized, the Company’s income tax provision would decrease by $5.4 million. The gross amount of interest and penalties accrued in income tax payable in the Consolidated Balance Sheets was approximately $0.3 million and $0.2 million at December 31, 2016 and 2015, respectively.

 

The Company or one of its subsidiaries files income tax returns in the United States federal jurisdiction and various state, local, and foreign jurisdictions. All material federal income tax matters have been concluded for years through 2013 subject to subsequent utilization of net operating losses generated in such years. All material state and local income tax matters have been reviewed through 2012. The majority of the Company’s foreign jurisdictions have been reviewed through 2013. Substantially all of the Company’s foreign jurisdictions’ statutes of limitation remain open with respect to the tax years from 2013 through 2016. The Company does not anticipate that its uncertain tax position will change significantly within the next twelve months subject to the completion of the ongoing tax audits and any resultant settlement.

 

F-37



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Notes to Consolidated Financial Statements (Continued)

 

Note 18 — Segment Reporting and Geographic Information

 

The Company operates and measures its results in one operating segment and therefore has one reportable segment: the design, development, manufacture, and support of thin film process equipment primarily sold to make electronic devices. The Company’s Chief Operating Decision Maker, the Chief Executive Officer, evaluates performance of the Company and makes decisions regarding allocation of resources based on total Company results.

 

Sales by market is as follows:

 

 

 

 

For the year ended December 31,

 

 

 

 

2016

 

 

 

2015

 

 

 

2014

 

 

 

 

(in thousands)

 

Sales by end-market

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Lighting, Display & Power Electronics

 

 

$

136,247

 

 

 

$

291,133

 

 

 

$

278,551

 

Advanced Packaging, MEMS & RF

 

 

68,304

 

 

 

61,935

 

 

 

11,449

 

Scientific & Industrial

 

 

74,913

 

 

 

64,297

 

 

 

44,429

 

Data Storage

 

 

52,987

 

 

 

59,673

 

 

 

58,444

 

Total

 

 

$

332,451

 

 

 

$

477,038

 

 

 

$

392,873

 

 

The Company’s significant operations outside the United States include sales and service offices in China, Europe and Rest of World. For geographic reporting, sales are attributed to the location in which the customer facility is located.

 

Sales and long-lived tangible assets by geographic region are as follows:

 

 

 

Net Sales to Unaffiliated Customers

 

Long-lived Tangible Assets

 

 

 

2016

 

 

 

2015

 

 

 

2014

 

 

 

2016

 

 

 

2015

 

 

 

2014

 

 

 

 

(in thousands)

 

United States

 

 

$

85,637

 

 

 

$

86,627

 

 

 

$

44,060

 

 

 

$

60,012

 

 

 

$

64,951

 

 

 

$

63,349

 

China

 

 

85,834

 

 

 

242,442

 

 

 

159,063

 

 

 

219

 

 

 

422

 

 

 

621

 

EMEA(1)

 

 

83,410

 

 

 

64,019

 

 

 

35,644

 

 

 

93

 

 

 

96

 

 

 

78

 

Rest of World

 

 

77,570

 

 

 

83,950

 

 

 

154,106

 

 

 

322

 

 

 

14,121

 

 

 

14,704

 

Total

 

 

$

332,451

 

 

 

$

477,038

 

 

 

$

392,873

 

 

 

$

60,646

 

 

 

$

79,590

 

 

 

$

78,752

 

(1) EMEA consists of Europe, the Middle East, and Africa

 

Note 19 — Selected Quarterly Financial Information (unaudited)

 

The following table presents selected unaudited financial data for each fiscal quarter of 2016 and 2015. Although unaudited, this information has been prepared on a basis consistent with the Company’s audited Consolidated Financial Statements and, in the opinion of management, reflects all adjustments (consisting only of normal recurring adjustments) that are considered necessary for a fair presentation of this information in accordance with GAAP. Such quarterly results are not necessarily indicative of future results of operations.

 

F-38



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Notes to Consolidated Financial Statements (Continued)

 

 

 

Fiscal 2016

 

Fiscal 2015

 

 

Q1

 

Q2

 

Q3

 

Q4

 

Q1

 

Q2

 

Q3

 

Q4

 

 

 

(in thousands, except per share amounts)

 

Net sales

 

 $

78,011

 

 $

75,348

 

 $

85,482

 

 $

93,609

 

 $

98,341

 

 $

131,410

 

 $

140,744

 

 $

106,543

 

Gross profit

 

31,956

 

31,439

 

33,455

 

36,008

 

35,136

 

49,069

 

54,250

 

38,786

 

Net income (loss)

 

(15,533)

 

(32,082)

 

(69,598)

 

(4,998)

 

(19,110)

 

(8,386)

 

5,306

 

(9,788)

 

Basic income (loss) per common share

 

(0.40)

 

(0.82)

 

(1.78)

 

(0.13)

 

(0.48)

 

(0.21)

 

0.13

 

(0.25)

 

Diluted income (loss) per common share

 

(0.40)

 

(0.82)

 

(1.78)

 

(0.13)

 

(0.48)

 

(0.21)

 

0.13

 

(0.25)

 

 

Impairment Charge

 

During the third quarter of 2016, the Company decided to significantly reduce future investments in its ALD technology development and, as a result, recorded a charge for impairment of its ALD assets, including $54.3 million for the full impairment of the intangible purchased ALD technology. The impairment charges were based on projected cash flows that required the use of unobservable inputs. Refer to Note 6, “Goodwill and Intangible Assets,” for additional information.

 

Note 20 — Subsequent Events

 

New Convertible Notes

 

In January 2017, the Company issued $345.0 million in aggregate principal amount of 2.70% convertible senior unsecured notes due 2023 (the “Convertible Notes”) pursuant to an indenture, dated as of January 18, 2017, between the Company and U.S. Bank National Association, as the trustee (the “Offering”). The Company received net proceeds from the Offering, after deducting fees and expenses payable by the Company, of approximately $336.0 million.

 

The Convertible Notes bear interest payable semiannually in arrears on January 15 and July 15 of each year, beginning on July 15, 2017. The Company will separately account for the liability and equity components of the Convertible Notes. The fair value of the liability component used in the allocation between the liability and equity components as of the date of issuance was based on the present value of cash flows using a discount rate of 7%, the Company’s borrowing rate for a similar debt instrument without the conversion feature.

 

The Convertible Notes mature on January 15, 2023, unless earlier repurchased, redeemed or converted. The Convertible Notes are convertible into common shares of the Company under certain circumstances described in the indenture. The initial conversion rate is 24.9800 shares of the Company’s common stock per $1,000 principal amount of the Convertible Notes, with an initial conversion price of approximately $40.03 per share of common stock. The conversion rate is subject to adjustment in certain circumstances. The dilutive effect of the Convertible Notes on income (loss) per share will be calculated using the treasury stock method since the Company has both the current intent and ability to settle the principal amount of the Convertible Notes in cash.

 

Agreement to Acquire Ultratech

 

On February 2, 2017, Veeco and Ultratech, Inc. (“Ultratech”), a leading supplier of lithography, laser-processing, and inspection systems used to manufacture semiconductor devices and LEDs, signed a definitive agreement for Veeco to acquire Ultratech. The Boards of Directors of both Veeco and Ultratech have unanimously approved the transaction.

 

Ultratech shareholders will receive (i) $21.75 per share in cash and (ii) 0.2675 of a share of Veeco common stock for each Ultratech common share outstanding. Based on Veeco’s closing stock price on February 1, 2017, the transaction

 

F-39



Table of Contents

 

Veeco Instruments Inc. and Subsidiaries

Notes to Consolidated Financial Statements (Continued)

 

consideration is valued at approximately $28.64 per Ultratech share. The implied total transaction value is approximately $815 million and the implied enterprise value is approximately $550 million, net of Ultratech’s net cash balance as of December 31, 2016. The transaction is expected to close in the second quarter of 2017, subject to approval by Ultratech shareholders, regulatory approvals in the United States, and other customary closing conditions.

 

F-40



Table of Contents

 

Schedule II — Valuation and Qualifying Accounts

 

 

 

 

 

Additions

 

 

 

 

 

 

 

 

 

Charged

 

 

 

 

 

 

 

 

 

Balance at

 

(Credited)

 

Charged to

 

 

 

Balance at

 

 

 

Beginning

 

to Costs and

 

Other

 

 

 

End of

 

Deducted from asset accounts:

 

of Period

 

Expenses

 

Accounts

 

Deductions

 

Period

 

 

 

 

 

 

 

(in thousands)

 

 

 

 

 

Year ended December 31, 2016

 

 

 

 

 

 

 

 

 

 

 

Allowance for doubtful accounts

 

$

206

 

$

171

 

$

 

$

(91

)

$

286

 

Valuation allowance in net deferred tax assets

 

56,273

 

50,520

 

 

 

106,793

 

 

 

$

56,479

 

$

50,691

 

$

 

$

(91

)

$

107,079

 

 

 

 

 

 

 

 

 

 

 

 

 

Year ended December 31, 2015

 

 

 

 

 

 

 

 

 

 

 

Allowance for doubtful accounts

 

$

731

 

$

43

 

$

 

$

(568

)

$

206

 

Valuation allowance in net deferred tax assets

 

34,909

 

23,655

 

(2,291

)

 

56,273

 

 

 

$

35,640

 

$

23,698

 

$

(2,291

)

$

(568

)

$

56,479

 

 

 

 

 

 

 

 

 

 

 

 

 

Year ended December 31, 2014

 

 

 

 

 

 

 

 

 

 

 

Allowance for doubtful accounts

 

$

2,438

 

$

(1,814

)

$

325

 

$

(218

)

$

731

 

Valuation allowance in net deferred tax assets

 

7,753

 

27,156

 

 

 

34,909

 

 

 

$

10,191

 

$

25,342

 

$

325

 

$

(218

)

$

35,640

 

 

S-1