AVGO-10.28.12-10K
Table of Contents

UNITED STATES SECURITIES AND EXCHANGE COMMISSION
Washington, DC 20549
Form 10-K
(MARK ONE)
 
 
R
 
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d)
OF THE SECURITIES EXCHANGE ACT OF 1934
 
 
For the fiscal year ended October 28, 2012
OR
o
 
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d)
OF THE SECURITIES EXCHANGE ACT OF 1934
 
 
For the transition period from          to          
Commission File Number: 001-34428
_____________________________________________________________
Avago Technologies Limited
(Exact Name of Registrant as Specified in Its Charter)
_____________________________________________________________
Singapore
(State or Other Jurisdiction of Incorporation or Organization)
 
98-0682363
(I.R.S. Employer Identification No.)
 
 
 
1 Yishun Avenue 7
Singapore 768923
(Address of Principal Executive Offices)
 
N/A
(Zip Code)
(65) 6755-7888
(Registrant’s telephone number, including area code)
_____________________________________________________________
Securities registered pursuant to Section 12(b) of the Act:
Title of Class
 
Name of Each Exchange on Which Registered
 
 
 
Ordinary Shares, no par value
 
The NASDAQ Global Select Market
Securities registered pursuant to Section 12(g) of the Act:
None
(Title of class)
_____________________________________________________________
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  Yes R     No o
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.  Yes o    No þ
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes R     No o
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).  Yes R    No o
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  R
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):
Large accelerated filer R
 
     Accelerated filer o
 
Non-accelerated filer o
 
Smaller reporting company o
 
 
(Do not check if a smaller reporting company)     
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).  Yes o    No þ
State the aggregate market value of the Registrant’s voting and non-voting ordinary shares held by non-affiliates as of the last business day of the Registrant’s most recently completed second fiscal quarter: As of April 29, 2012, the last business day of our most recently completed second fiscal quarter, the aggregate market value of the Registrant’s ordinary shares held by non-affiliates of the Registrant (based upon the closing sale price of such shares on the Nasdaq Global Select Market on April 27, 2012, the last trading day prior to our fiscal quarter end) was approximately $7,715,427,462.
As of December 7, 2012, the Registrant had 245,742,488 ordinary shares outstanding.
Documents Incorporated by Reference
Information required in response to Part III of this Annual Report on Form 10-K is hereby incorporated by reference from the Registrant’s definitive Proxy Statement for its 2012 Annual Meeting of Shareholders. Except as expressly incorporated by reference, the Registrant’s Proxy Statement shall not be deemed to be a part of this Annual Report on Form 10-K. The Registrant intends to file its definitive Proxy Statement within 120 days after its fiscal year ended October 28, 2012.



AVAGO TECHNOLOGIES LIMITED
2012 ANNUAL REPORT ON FORM 10-K

TABLE OF CONTENTS
 
 
Page
 
 
 
 
 EX-10.40
 EX-21.1
 EX-23.1
 EX-24.1
 EX-31.1
 EX-31.2
 EX-32.1
 EX-32.2
 EX-101
INSTANCE DOCUMENT
 
 EX-101
SCHEMA DOCUMENT
 
 EX-101
CALCULATION LINKBASE DOCUMENT
 
 EX-101
LABELS LINKBASE DOCUMENT
 
 EX-101
PRESENTATION LINKBASE DOCUMENT
 
 EX-101
DEFINITION LINKBASE DOCUMENT
 

2

Table of Contents

PART I
The following discussion should be read in conjunction with the consolidated financial statements and notes thereto included elsewhere in this Annual Report on Form 10-K. This Annual Report on Form 10-K contains forward-looking statements within the meaning of the federal securities laws and particularly in Item 1: “Business,” Item 1A:“Risk Factors,” Item 3: “Legal Proceedings” and Item 7: “Management’s Discussion and Analysis of Financial Condition and Results of Operations” of this Annual Report on Form 10-K. These statements are indicated by words or phrases such as “anticipate,” “expect,” “estimate,” “seek,” “plan,” “believe,” “could,” “intend,” “will,” and similar words or phrases. These forward-looking statements may include projections of financial information; statements about historical results that may suggest trends for our business; statements of the plans, strategies, and objectives of management for future operations; statements of expectation or belief regarding future events, technology developments, our products, product sales, expenses, liquidity, cash flow and growth rates, or enforceability of our intellectual property rights; and the effects of seasonality on our business. These forward-looking statements are based on current expectations, estimates, forecasts and projections of our or industry performance, based on management’s judgment, beliefs, current trends and market conditions, and involve risks and uncertainties that may cause actual results to differ materially from those contained in the forward-looking statements. We derive most of our forward-looking statements from our operating budgets and forecasts, which are based upon many detailed assumptions. While we believe that our assumptions are reasonable, we caution that it is very difficult to predict the impact of known factors, and it is impossible for us to anticipate all factors that could affect our actual results. Accordingly, we caution you not to place undue reliance on these statements. Important factors that could cause actual results to differ materially from our expectations are disclosed under “Risk Factors” in Part I, Item 1A of this Annual Report on Form 10-K. These factors include global economic conditions and concerns; cyclicality in the semiconductor industry or in our target markets; quarterly and annual fluctuations in operating results; demands or loss of our significant customers; increased dependence on the volatile, wireless handset market; our competitive performance and ability to continue achieving design wins with our customers and the timing of those design wins; our dependence on contract manufacturing and outsourced supply chain, including single source suppliers, and our ability to improve our cost structure through our manufacturing outsourcing program; prolonged disruptions of our or our contract manufacturers' manufacturing facilities or other significant operations, for example due to natural disasters; our increased dependence on outsourced service providers for certain key business services and their ability to execute to our requirements; our ability to maintain gross margin; our ability to maintain tax concessions in certain jurisdictions; our ability to protect our intellectual property, defend against third-party intellectual property claims and any associated increases in litigation expenses; dependence on and risks associated with distributors of our products; any expenses or reputational damage associated with resolving customer product warranty and indemnification claims; our ability to achieve the growth prospects and synergies expected from our acquisitions; delays, challenges and expenses associated with integrating acquired companies with our existing businesses; and other events and trends on a national, regional and global scale, including those of a political, economic, business, competitive and regulatory nature. All of the forward-looking statements in this Annual Report on Form 10-K are qualified in their entirety by reference to the factors listed above and those discussed under the heading “Risk Factors” Part I, Item 1A of this Annual Report on Form 10-K. We caution you that the foregoing list of important factors may not contain all of the material factors that are important to you. In addition, in light of these risks and uncertainties, the matters referred to in the forward-looking statements contained in this Annual Report on Form 10-K may not in fact occur. We undertake no intent or obligation to publicly update or revise any forward-looking statement as a result of new information, future events or otherwise, except as otherwise required by law.
References in this Annual Report on Form 10-K to “Avago”, “the Company”, “we”, “our”, or “us” refer to Avago Technologies Limited and its subsidiaries, on a consolidated basis, unless otherwise indicated or the context otherwise requires. Our fiscal year ends on the Sunday closest to October 31. We refer to our fiscal years by the calendar year in which they end. For example, the fiscal year ended October 28, 2012 is referred to as “fiscal year 2012”.

3

Table of Contents

ITEM 1.
BUSINESS
Overview
We are a leading designer, developer and global supplier of a broad range of analog semiconductor devices with a focus on III-V based products. III-V semiconductor materials have higher electrical conductivity and thus tend to have better performance characteristics in radio frequency, or RF, and optoelectronic applications than silicon. We differentiate ourselves through our high performance design and integration capabilities. We serve three primary target markets, with our wireless communications, wired infrastructure and industrial and automotive electronics target markets accounting for the substantial majority of our revenues. Our product portfolio is extensive and includes thousands of products. Applications for our products in these target markets include cellular phones, consumer appliances, data networking and telecommunications equipment, enterprise storage and servers, factory automation and displays. Until recently, we also sold products into the consumer and computing peripherals target market, which has historically represented a small portion of our total net revenue. However, as this became a mature and non-strategic market for us, during fiscal year 2012 we transitioned from developing, manufacturing and selling products into this target market to selling or licensing our intellectual property relevant to this target market, thereby generating royalty revenue instead of product sales revenue. We completed this transition in the fourth quarter of the fiscal year ended October 28, 2012 or fiscal year 2012.
We have a 50-year history of innovation, dating back to our origins within Hewlett-Packard Company. Over the years, we have assembled a large team of analog design engineers, and we maintain design and product development engineering resources around the world. Our locations include two design centers in the United States, five in Asia and four in Europe. We have developed an extensive portfolio of intellectual property that currently includes over 4,300 U.S. and foreign patents and patent applications. Our history and market position enable us to strategically focus our research and development resources to address attractive target markets. We leverage our significant intellectual property portfolio to integrate multiple technologies and create component solutions that target growth opportunities. We design products that deliver high-performance and provide mission-critical functionality. In particular, we were among the first to deliver commercial film bulk acoustic resonator, or FBAR, filters which offer technological advantages over competing filters for smartphones to function more efficiently in today's congested RF spectrum. FBAR technology has historically maintained a significant market share within code division multiple access, or CDMA, and 3G/W-CDMA markets. As cellular carriers move to the 4G/long term evolution, or LTE standard worldwide, we believe these advantages will continue to facilitate rapid adoption of FBAR technology throughout the mobile phone ecosystems. In optical solutions, we were a pioneer in commercializing vertical-cavity surface emitting laser, or VCSEL. Our fiber optic products and our VCSEL-based products, including high bandwidth parallel optic transceivers and modules, have been widely adopted throughout the wired infrastructure and computing industries. In optoelectronics, we are a market leader in submarkets such as optocouplers and optical encoders.
We have a diversified and well-established customer base of over 25,000 end customers, located throughout the world, which we serve through our multi-channel sales and fulfillment system. However, original equipment manufacturers, or OEMs, and distributors typically account for the substantial majority of our sales. We have established strong relationships with leading OEM customers across multiple target markets. Many of our major customer relationships have been in place multiple years and we have supplied multiple products during that time period. Our close customer relationships have often been built as a result of years of collaborative product development which has enabled us to build our intellectual property portfolio and develop critical expertise regarding our customer’s requirements, including substantial system level knowledge. This collaboration has provided us with key insights into our customers and has enabled us to be more efficient and productive and to better serve our target markets and customers. We distribute most of our products through our broad distribution network, and a significant portion of our sales are to two of the largest global electronic components distributors, Avnet, Inc. and Arrow Electronics, Inc. We also have a direct sales force focused on supporting large OEMs.
We focus on maintaining an efficient global supply chain and a variable, low-cost operating model. Accordingly, we have outsourced a majority of our manufacturing operations utilizing third-party foundry and assembly and test capabilities, as well as most of our corporate infrastructure functions. We aim to minimize capital expenditures by focusing our internal manufacturing capacity on products utilizing our innovative materials and processes to protect our intellectual property and to develop the technology for manufacturing, while outsourcing standard complementary metal oxide semiconductor, or CMOS, processes. We also have over 40 years of operating history in Asia, where approximately 57% of our employees are located and where we produce and source the majority of our products. Our presence in Asia places us in close proximity to many of our customers’ manufacturing facilities and at the center of worldwide electronics manufacturing.
Markets and Products
We focus on leveraging our design capabilities to develop products for target markets where we believe our innovation and reputation will allow us to earn attractive margins. In each of our target markets, we have multiple product families that

4

Table of Contents

primarily provide OEMs with component or subsystem products. Our product portfolio ranges from simple discrete devices to complex sub-systems that include multiple device types and incorporate firmware for interface between digital systems. In some cases, our products include mechanical hardware that interfaces with optoelectronic or capacitive sensors. We intend to expand our product offerings to address existing and adjacent market opportunities, and plan to selectively target attractive segments within large established markets. We target markets that require high quality and the integrated performance characteristics of our products. For the fiscal year ended October 28, 2012, wireless communications contributed 45%, wired infrastructure contributed 28% and industrial and automotive electronics contributed 22% of our net revenue, respectively.
Wireless Communications.  We support the wireless industry with a broad variety of RF semiconductor devices, including monolithic microwave integrated circuit filters and duplexers using our proprietary FBAR technology, front end modules that incorporate multiple die into multi-function RF devices, diodes and discrete transistors. Our expertise in amplifier design, FBAR technology and module integration enables us to offer industry-leading efficiency in RF transmitter applications. Our proprietary gallium arsenide, or GaAs, processes are critical to the production of power amplifier, or PA, and low noise amplifier products. In addition to RF devices, we provide a variety of optoelectronic sensors for mobile handset applications. We also supply light emitting diodes, or LEDs, for camera-phone flashes and for backlighting applications in mobile handset keypads.
Wired Infrastructure.  In the storage and Ethernet networking markets, we supply transceivers that receive and transmit information along optical fibers. We provide a range of product bandwidth options for customers, including options ranging from 125 megabyte data, or MBd, Fast Ethernet transmitters and receivers to 16 Gigabit transceivers. We supply parallel optic transceivers with as many as 12 parallel channels for high performance computing, core routing and server applications. For enterprise networking and server input/output, or I/O, applications, we also supply high speed serializer/deserializer, or SerDes, products integrated into application specific integrated circuits, or ASICs.
Industrial and Automotive Electronics.  We provide a broad variety of products for the general industrial, automotive and consumer appliance markets. We offer optical isolators, or optocouplers, which provide electrical insulation and signal isolation for signaling systems that are susceptible to electrical noise or interference. Optocouplers are used in a diverse set of applications, including industrial motors, automotive systems including those used in hybrid engines, power generation and distribution systems, switching power supplies, motion sensors, telecommunications equipment, consumer appliances, computers and office equipment, plasma displays, and military electronics. For industrial motors and robotic motion control, we supply optical encoders, as well as integrated circuits, or ICs, for the controller and decoder functions. For electronic signs and signals, we supply LED assemblies that offer high brightness and stable light output over thousands of hours, enabling us to support traffic signals, large commercial signs and other displays. For industrial networking, we provide Fast Ethernet and faster optical transceivers using plastic optical fiber that enable quick and interoperable networking and factory automation.

5

Table of Contents

The table below presents the major product families, major applications and major end customers in our three primary target markets.
Target Market
 
Major Product Families
Major Applications
Major End Customers
Wireless Communications
 
•   RF power amplifiers
•   Voice and data communications
•   LG Electronics Inc.
 
 
•   RF filters
•   Camera phone
•   Huawei Technologies Co., Ltd.
 
 
•   RF front end modules (FEMs)
•   Keypad and display backlighting
•   Samsung Electronics Co., Ltd.
 
 
•   Ambient light sensors
•   Backlighting control
 
 
 
•   Proximity Sensors
•   Base stations
 
 
 
•   Low noise amplifiers
 
 
 
 
•   Multimarket-wave mixers
 
 
 
 
•   Diodes
 
 
 
 
 
 
 
Wired Infrastructure
 
•   Fiber optic transceivers
•   Data communications
•   Brocade Communications
 
 
•   Serializer/deserializer (SerDes)
•   Storage area networking
Systems, Inc.
 
 
ASICs
•   Servers
•   Cisco Systems Inc.
 
 
 
•   Core routing and transport
•   Hewlett-Packard Company
 
 
 
 
•   Huawei Technologies Co., Ltd.
 
 
 
 
•   International Business
 
 
 
 
Machines Corp.
 
 
 
 
•   Juniper Networks Inc.
 
 
 
 
 
Industrial and
 
•   Industrial fiber optics
•   In-car infotainment
•   ABB Ltd.
Automotive Electronics
 
•   Optocouplers
•   Displays
•   Schneider Electric
 
 
•   Motion control encoders and
•   Lighting
•   Siemens AG
 
 
subsystems
•   Factory automation

 
 
•   LEDs
•   Motor controls
 
 
 
 
•   Power isolation
 
 
 
 
•   Renewable energy systems
 

Legacy Target Market - Consumer and Computing Peripherals.  Until August 2012, we also manufactured products for the consumer and computing peripherals target market, including motion control encoders that control the paper feed and print head movement in printers and other office automation products and image sensors for optical mouse applications, using LEDs and CMOS image sensors to create a subsystem that can detect motion over an arbitrary desktop surface. During fiscal year 2012, we transitioned from manufacturing and selling these products to selling or licensing our intellectual property relevant to this target market, thereby generating royalty revenue instead of product sales. Consumer and computing peripherals contributed 5% to our net revenue for the fiscal year ended October 28, 2012.
Research and Development
We are committed to continuous investment in product development, with a focus on rapidly introducing new, proprietary products. Many of our products have grown out of our own research and development efforts, and have given us competitive advantages in certain target markets due to performance differentiation. We focus our research and development efforts on the development of innovative, sustainable and higher value product platforms. We leverage our design capabilities in markets where we believe our innovation and reputation will allow us to earn attractive margins by developing high value-add products.
We intend to continue to build on our history of innovation, and our intellectual property portfolio, design expertise and system-level knowledge, to create more integrated solutions. We plan to continue investing in product development to drive growth in our business. We also invest in process development and maintain fabrication capabilities in order to optimize processes for devices that are manufactured internally. Our field application engineers, or FAEs, and design engineers are located near many of our customers around the world, enabling us to support our customers in each stage of their product development cycle, from early stages of production design through volume manufacturing and future growth. By collaborating with our customers, we have opportunities to develop high value added, customized products for them that leverage our existing technologies. Research and development expenses were $335 million, $317 million and $280 million for the years ended October 28, 2012, October 30, 2011 and October 31, 2010, respectively. We anticipate that we will continue to make significant research and development expenditures in order to maintain our competitive position with a continuous flow of innovative and sustainable product platforms. As of October 28, 2012, we had approximately 1,300 employees dedicated to research and development at multiple locations around the world.

6

Table of Contents

Customers, Sales, Marketing and Distribution
A relatively small number of customers account for a significant portion of our net revenue. In the year ended October 28, 2012, Foxconn Technology Group accounted for 17% of our net revenue, and our top 10 customers, which included three distributors, collectively accounted for 62% of our net revenue. However, we believe that aggregate sales of our products to certain of our customers exceeds the amount of our direct sales to them. For example, we believe our aggregate sales to two OEMs, when direct sales are combined with indirect sales to them through the respective contract manufacturers that they utilize, each accounted for more than 10% of our net revenues, for fiscal year 2012. We expect to continue to experience significant customer concentration in future periods. The loss of, or significant decrease in demand from, any of our top ten customers could have a material adverse effect on our business, results of operation and financial condition.
We sell our products through a network of distributors and our direct sales force globally. Our customers require timely delivery often to multiple locations around the world. We have strategically developed distributor relationships to serve tens of thousands of customers. Our direct sales force is focused on supporting our large OEM customers. Additionally, our extensive network of FAEs enhances our customer reach and our visibility into new product opportunities. We also complement our direct sales force with a network of manufacturing sales representative companies to cover particular geographies and customers in emerging markets. Our main global distributors are Avnet, Inc., and Arrow Electronics, Inc., complemented by a number of specialty regional distributors with customer relationships based on their respective product ranges.
As of October 28, 2012, our sales and marketing organization consisted of approximately 500 employees, many of whom have responsibility for emerging accounts, for large, global accounts, or for our distributors. Our sales force has specialized product and service knowledge that enables us to sell specific offerings at key levels throughout a customer’s organization.
As part of our global reach, we have a number of sales offices located in various countries, with a significant presence in Asia, which is a key center of the worldwide electronics supply chain. Many of our customers design products in North America or Europe that are then manufactured in Asia. We maintain dedicated regional customer support call centers, where we address customer issues and handle logistics and other order fulfillment requirements. We are well-positioned to support our customers throughout the design, technology transfer and manufacturing stages across all geographies.
Operations
A majority of our manufacturing operations are outsourced and we utilize external foundries to fabricate our semiconductors, including Taiwan Semiconductor Manufacturing Company Ltd., or TSMC and WIN Semiconductors Corp. For certain of our product families, substantially all of our revenue is derived from semiconductors fabricated by external foundries, including our high speed SerDes ICs, LEDs, and LED-based displays. We also use third-party contract manufacturers for a significant majority of our assembly and test operations, including Amertron Incorporated, ASE Korea Inc., and the Hana Microelectronics Public Company Ltd. group of companies, or Hana. In some instances we may only qualify one contract manufacturer to manufacture certain of our products. For example, until recently, Hana was the only manufacturer of certain of sensors for our industrial market and certain multi-market transistor products. We maintain our internal fabrication facilities for products utilizing our innovative materials and processes to protect our intellectual property and to develop the technology for manufacturing, and we outsource standard CMOS processes. Examples of internally fabricated semiconductors include FBAR filters for wireless communications and VCSEL-based lasers for fiber optic communications. The majority of our internal III-V semiconductor wafer fabrication is done in the United States and Singapore. As of October 28, 2012, approximately 1,500 manufacturing employees were devoted to our internal fabrication operations as well as management of outsourced activities. For selected customers, we maintain finished goods inventory near or at customer manufacturing sites to support their just-in-time production.
Materials and Suppliers
Our manufacturing operations employ a wide variety of semiconductors, electromechanical components and assemblies and raw materials. We purchase materials from hundreds of suppliers on a global basis. These supply relationships are generally conducted on a purchase order basis. While we have not experienced any significant difficulty in obtaining the materials used in the conduct of our business and we believe that no single supplier is material, some of the parts are not readily available from alternate suppliers due to their unique design or the length of time necessary for re-design or qualification. Our long-term relationships with our suppliers allow us to proactively manage our technology development and product discontinuance plans, and to monitor our suppliers' financial health. Some suppliers may nonetheless extend their lead times, limit supplies, increase prices or cease to produce necessary parts for our products. If these are unique components, we may not be able to find a substitute quickly, or at all. To address the potential disruption in our supply chain, we may use a number of techniques, including qualifying multiple sources of supply, redesign of products for alternative components and purchase of incremental inventory for supply buffer.

7

Table of Contents

Competition
The global semiconductor market is highly competitive. Our competitors range from large, international companies offering a wide range of products to smaller companies specializing in narrow markets. We compete with integrated device manufacturers, or IDMs, and fabless semiconductor companies as well as the internal resources of large, integrated OEMs. The competitive landscape is changing as a result of a trend toward consolidation within the industry, as some of our competitors have merged with or been acquired by other competitors while others have begun collaborating with each other. We expect this consolidation trend to continue. We expect competition in the markets in which we participate to continue to increase as existing competitors improve or expand their product offerings and as new companies enter the market. Additionally, our ability to compete effectively depends on a number of factors, including: quality, technical performance, price, product features, product system compatibility, system-level design capability, engineering expertise, responsiveness to customers, new product innovation, product availability, delivery timing and reliability, and customer sales and technical support.
In the wireless communications target market, we provide RF amplifiers, filters modules and ambient light and proximity sensors for mobile phones. Our primary competitors for this target market are Hittite Microwave Corporation, Murata Manufacturing Co., Ltd., RF Micro Devices, Inc., Skyworks Solutions, Inc., ams AG (formerly TAOS Inc.) and TriQuint Semiconductor, Inc. We compete based on our expertise in amplifier design, FBAR technology and module integration. We also compete against a number of smaller, niche wireless players based on our proprietary design expertise, broad product portfolio, proprietary material processes and integration expertise.
In the wired infrastructure target market, we provide fiber optic transceivers and SerDes ASICs for high-speed data communications and server applications. Our primary competitors for this target market are Finisar Corporation, International Business Machines Corp., Microelectronics Division, LSI Corporation and ST Microelectronics N.V. We compete based on the strength of our high speed proprietary design expertise, our customer relationships, proprietary process technology and broad product portfolio.
In the industrial and automotive electronics target market, we provide fiber optic transceivers for communication networks, LEDs for displays, motion control encoders and subsystems and optocouplers for factory automation and motor controls. Our primary competitors for this target market are Analog Devices, Inc., Heidenhain Corporation, Renesas Electronics Corporation and Toshiba Corporation. We compete based on our design expertise, broad product portfolio, reputation for quality products and large customer base.
Intellectual Property
Our success depends in part upon our ability to protect our intellectual property. To accomplish this, we rely on a combination of intellectual property rights, including patents, copyrights, trademarks, service marks, trade secrets and similar intellectual property, as well as customary contractual protections with our customers, suppliers, employees and consultants, and through security measures to protect our trade secrets. We believe our current product expertise, key engineering talent and intellectual property portfolio provide us with a strong platform from which to develop application specific products in key target markets.
As of October 28, 2012, we had approximately 2,000 U.S. and 1,200 foreign patents and approximately 400 U.S. and 700 foreign pending patent applications. Our research and development efforts are presently resulting in approximately 100 new patent applications per year relating to a wide range of ASIC, isolation, encoder, LED, RF and optoelectronic components and associated applications. The expiration dates of our patents range from 2013 to 2031, with a small number of patents expiring in the near future, none of which are expected to be material to our intellectual property portfolio.
We focus our patent application program to a greater extent on those inventions and improvements that we believe are likely to be incorporated into our products as contrasted with more basic research. However, we do not know whether any of our pending patent applications will result in the issuance of patents or the extent to which the examination process could require us to narrow our claims.
A meaningful portion of our intellectual property is the subject of cross-licenses to other companies that have been granted by Agilent Technologies, Inc., or if originally derived from Hewlett-Packard Company, by Hewlett-Packard Company. In addition, we license third-party technologies that are incorporated into some elements of our design activities, products and manufacturing processes. Historically, licenses of the third-party technologies used by us have been available to us on acceptable terms.
The semiconductor industry is characterized by the existence of a large number of patents, copyrights, trademarks and trade secrets and by the vigorous pursuit, protection and enforcement of intellectual property rights. Many of our customer agreements require us to indemnify our customers for third-party intellectual property infringement claims, which has in the past required and may in the future require that we defend those claims, and might also require that we pay damages in the case of adverse rulings. Claims of this sort could harm our relationships with our customers and might deter future customers from

8

Table of Contents

doing business with us. With respect to any intellectual property rights claims against us or our customers or distributors, we may be required to cease manufacture of the infringing product, pay damages, expend resources to develop non-infringing technology, seek a license which may not be available on commercially reasonable terms or at all, or relinquish patents or other intellectual property rights.
Employees
As of October 28, 2012, we had approximately 3,600 employees worldwide. Approximately 1,300 were dedicated to research and development, 1,500 to manufacturing, 500 to sales and marketing and 300 to general and administrative functions. By geography, approximately 57% of our employees are located in Asia, 36% in North America and 7% in Europe. The substantial majority of our employees are not party to a collective bargaining agreement. However, approximately 350 of our 1,000 employees in Singapore, none of whom are in management or supervisory positions, are subject to a collective bargaining agreement with United Workers of Electronic and Electrical Industries that expires on June 30, 2013. In addition, all of our employees in Italy and some employees in Japan are subject to a collective bargaining agreement. In Italy we are also subject to national collective agreements between unions and employer associations. Such Italian national collective agreements are compulsory for both the employees and the employer. In addition, in Germany we are subject to collective agreements with the works councils at our sites, which apply to German employees other than managing directors and managers with similar authority. We believe we have a good working relationship with our employees and we have never experienced an interruption of business as a result of labor disputes.
Environmental and Other Regulation
Our research and development and manufacturing operations involve the use of hazardous substances and are regulated under international, federal, state and local laws governing health and safety and the environment. These regulations include limitations on discharge of pollutants to air, water, and soil; remediation requirements; product chemical content limitations; manufacturing chemical use and handling restrictions; pollution control requirements; waste minimization considerations; and treatment, transport, storage and disposal of solid and hazardous wastes. We are also subject to regulation by the United States Occupational Safety and Health Administration and similar health and safety laws in other jurisdictions.
We believe that our properties and operations at our facilities comply in all material respects with applicable environmental laws and worker health and safety laws; however, the risk of environmental liabilities cannot be completely eliminated and there can be no assurance that the application of environmental and health and safety laws to our business will not require us to incur significant expenditures.
We are also regulated under a number of international, federal, state and local laws regarding recycling, product packaging and product content requirements, including legislation enacted in the European Union and China, among a growing number of jurisdictions, which have placed greater restrictions on the use of lead, among other chemicals, in electronic products, which affects materials composition and semiconductor packaging. These laws are becoming more stringent and may in the future cause us to incur significant expenditures. We are also subject to new SEC rules that require diligence, disclosure and reporting on whether certain minerals and metals, known as conflict minerals, used in our products originate from the Democratic Republic of Congo and adjoining countries. Among other things, the implementation of these rules could adversely affect the sourcing, availability and pricing of minerals we use in our products, will require us to incur additional costs to comply with the disclosure requirements and we may face difficulties in satisfying customers who require that all of the products are certified as conflict mineral free.
Backlog
Our sales are generally made pursuant to short-term purchase orders. These purchase orders are made without deposits and may be, and often are, rescheduled, canceled or modified on relatively short notice, and in most cases without substantial penalty. Therefore, we believe that purchase orders or backlog are not necessarily a reliable indicator of future sales.
Seasonality
We are affected by seasonal trends in the semiconductor and related industries. We typically experience sequentially lower revenues in the first half of the fiscal year. Historically, our revenue in the second half of the fiscal year is typically higher than our revenue in the first half of the fiscal year due to seasonality in our wireless communications target market. This target market historically tended to experience seasonality due to the calendar year-end holiday selling seasons and related OEM product launches. However, OEM product launches and transitions in the wireless communications target market are becoming increasingly unpredictable in both timing and magnitude. In addition, these seasonal effects can also be overshadowed by other factors such as macroeconomic effects.

9

Table of Contents

Financial Information about Geographic Areas
For information on the geographic concentration of our net revenues and long-lived assets, please see Note 13. “Segment Information,” of our consolidated financial statements included elsewhere in the Annual Report on Form 10-K.
Other Information
Avago Technologies Limited was incorporated under the laws of the Republic of Singapore in August 2005. Our Singapore company registration number is 200510713C. The address of our registered office and our principal executive offices is 1 Yishun Avenue 7, Singapore 768923, and our telephone number is +65-6755-7888. We are the successor to the Semiconductor Products Group of Agilent Technologies Inc., which we acquired on December 1, 2005, referred to as the SPG Acquisition. Our ordinary shares are listed on the Nasdaq Global Select Market under the trading symbol “AVGO”.
We are subject to the information and periodic reporting requirements of the Securities Exchange Act of 1934, or Exchange Act, and, in accordance therewith, file periodic reports, proxy statements and other information with the SEC. Such periodic reports, proxy statements and other information is available for inspection and copying at the SEC’s Public Reference Room at 100 F Street, NE, Washington, DC 20549 or may be obtained by calling the SEC at 1–800–SEC–0330. In addition, the SEC maintains a website at http://www.sec.gov that contains reports, proxy statements and other information regarding issuers that file electronically with the SEC. We maintain a website at www.avagotech.com. You may access our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, proxy statements and other reports (and amendments thereto) filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act with the SEC free of charge at the “Investors — SEC Filings” section of our website, as soon as reasonably practicable after such material is electronically filed with, or furnished to, the SEC. The reference to our website address does not constitute incorporation by reference of the information contained on or accessible through our website.


10

Table of Contents

RISK FACTORS
Our business, operations and financial results are subject to various risks and uncertainties, including those described below, that could adversely affect our business, financial condition, results of operations, cash flows, and the trading price of our ordinary shares. The following important factors, among others, could cause our actual results to differ materially from those expressed in forward-looking statements made by us or on our behalf in filings with the SEC, press releases, communications with investors and oral statements.
Risks Related to Our Business
Adverse global economic conditions could have a negative effect on our business, results of operations and financial condition and liquidity.
Adverse global economic conditions have from time to time caused or exacerbated significant slowdowns in the semiconductor industry generally, as well as in our target markets. The global recession in 2008 and 2009 caused U.S. and foreign businesses to slow spending on our products and caused consumers to reduce spending on many products our customers make, such as personal computers, mobile phone and flat screen televisions. Recently, market and business conditions in general have been adversely affected by investor and customer concerns about the global economic outlook, including concerns about the economic recovery in the United States and the ongoing sovereign debt crisis in Europe. U.S. and global economic conditions could be exacerbated by the negative effects on economic growth resulting from the combination of federal income tax increases and government spending restrictions potentially occurring at the end of calendar year 2012 in the United States (commonly referred to as the “fiscal cliff”). A slowdown in the economic recovery or worsening global economic conditions as a result of these or other factors will likely cause our customers and consumers to reduce or delay spending, and could lead to the insolvency of key suppliers (resulting in product delays) and customers, all of which could negatively affect our business, financial condition and result of operations.
We operate in the highly cyclical semiconductor industry, which is subject to significant downturns.
The semiconductor industry is highly cyclical and is characterized by constant and rapid technological change and price erosion, evolving technical standards, frequent new product introductions, short product life cycles (for semiconductors and for the end-user products in which they are used) and wide fluctuations in product supply and demand. From time to time, these and other factors, together with changes in general economic conditions, cause significant upturns and downturns in the industry in general and in our business in particular. Periods of industry downturns have been characterized by diminished demand for end-user products, high inventory levels and periods of inventory adjustment, under-utilization of manufacturing capacity, changes in revenue mix and accelerated erosion of average selling prices, resulting in an adverse effect on our business, financial condition and results of operations. We expect our business to continue to be subject to cyclical downturns even when overall economic conditions are relatively stable. In addition, in any future economic downturn we may be unable to grow our revenues or reduce our costs quickly enough to maintain our operating profitability.
Our operating results are subject to substantial quarterly and annual fluctuations.
Our revenues and operating results have fluctuated in the past and are likely to fluctuate in the future. These fluctuations may occur on a quarterly and annual basis and are due to a number of factors, many of which are beyond our control. These factors include, among others:
changes in end-user demand for the products manufactured and sold by our customers;
the timing of receipt, reduction or cancellation of significant orders by customers;
fluctuations in the levels of component inventories held by our customers;
customer concentration and the gain or loss of significant customers;
market acceptance of our products and our customers' products;
changes in our product mix or customer mix and their effect on our gross margin;
our ability to develop, introduce and market new products and technologies on a timely basis;
the timing and extent of our non-product revenue, such as product development revenues and royalty and other payments from intellectual property sales and licensing arrangements;
new product announcements and introductions by us or our competitors;
the timing of the launch by our customers of new products, such as cell phones, in which our products are included;

11

Table of Contents

timing and amount of research and development and related new product expenditures, and the timing of receipt of any research and development grant monies;
seasonality or cyclical fluctuations in our markets;
currency fluctuations;
utilization of our internal manufacturing facilities;
fluctuations in manufacturing yields;
significant warranty claims, including those not covered by our suppliers or our insurers;
availability and cost of raw materials from our suppliers;
intellectual property disputes and associated litigation expenses;
loss of key personnel or the shortage of available skilled workers;
the effects of competitive pricing pressures, including decreases in average selling prices of our products; and
changes in our tax incentive arrangements or structure, which may adversely affect our net tax expense in any quarter in which such an event occurs.
The foregoing factors are difficult to forecast, and these, as well as other factors, could materially adversely affect our quarterly or annual operating results. In addition, a significant amount of our operating expenses are relatively fixed in nature due to our significant sales, research and development and internal manufacturing overhead costs. Any failure to adjust spending quickly enough to compensate for a revenue shortfall could magnify the adverse impact of such revenue shortfall on our results of operations. As a result, we believe that quarter-to-quarter comparisons of our revenue and operating results may not be meaningful or a reliable indicator of our future performance. If our operating results in one or more future quarters fail to meet the expectations of securities analysts or investors, an immediate and significant decline in the trading price of our ordinary shares may occur.
The demands or loss of one or more of our significant customers may adversely affect our business.
Some of our customers are material to our business and results of operations. During fiscal year 2012, Foxconn Technology Group companies together accounted for 17% of our net revenue (22% in the fourth quarter of fiscal year 2012)and our top 10 customers, which included three distributors, collectively accounted for 62% of our net revenue. During fiscal year 2011, no direct customer accounted for 10% or more of our net revenue, but our top 10 customers, which included three distributors, collectively accounted for 54% of our net revenue. We also believe that aggregate sales of our products to certain of our customers exceeds the amount of our direct sales to them. For example, we believe our aggregate sales to two OEMs, when direct sales are combined with indirect sales to them through the respective contract manufacturers that they utilize, each accounted for more than 10% of our net revenues, respectively, for fiscal year 2012. This customer concentration increases the risk of quarterly fluctuations in our revenues and operating results. In addition, our top customers' purchasing power has, in some cases, given them the ability to make greater demands on us with regard to pricing and contractual terms in general. We expect this trend to continue, which may adversely affect our gross margins on certain products. In addition, we expect this will result in our results of operations becoming increasingly sensitive to deterioration in the financial condition of, or other adverse developments related to, one or more of our significant customers. Although we believe that our relationships with our major customers are good, we generally do not have long-term contracts with any of them, which is typical of our industry. As a result, although our customers provide indications of their product needs and purchases on an annual basis, they generally purchase our products on a weekly or daily basis and the relationship, as well as particular orders, can be terminated at any time. In order to ensure availability of our products for some of our largest customers, we start the manufacturing of our products in advance of receiving purchase orders, based on forecasts provided by these customers. However, these forecasts are not binding purchase commitments and as a result, we incur inventory and manufacturing costs in advance of anticipated sales. Since actual demand for our products may not match these forecasts, manufacturing based on such forecasts subjects us to increased risks of high inventory carrying costs, increased obsolescence and increased operating costs. In addition, the loss of any of our major customers, or any substantial reduction in sales to any of these customers, could have a material adverse effect on our business, financial condition and results of operations.

We are increasingly dependent on the mobile handset market, which is volatile and is characterized by short product life cycles, fluctuations in demand, seasonality and increasingly high customer concentration any of which could negatively impact our business or results of operations.
 
A substantial and increasing portion of our revenue is generated from sales of products for use in mobile handsets. The mobile handset market is characterized by intense competition among an increasingly concentrated group of OEMs, rapidly

12

Table of Contents

evolving technology, and changing consumer preferences. These factors result in the frequent introduction of new products, aggressive price competition, short product life cycles, and continually evolving mobile handset specifications. If we, our customers or mobile handset OEMs are unable to manage product transitions, our business and results of operations could be negatively affected. Our business is also dependent on the broad commercial acceptance of the mobile handsets into which our products are incorporated. If the mobile handsets into which our products are designed do not achieve significant customer acceptance, our revenue will be adversely affected. Similarly, even though we may achieve design wins for a particular handset, we may not be designed into the next generation of a particular handset or new model of handset, which could result in a sharp decrease in our revenues.
In the mobile handset market, demand is typically stronger in the second half of the year than the first half of the year. However, if mobile handset OEMs inaccurately forecast consumer demand, this may lead to significant changes in orders to their component suppliers. We have experienced both increases and decreases in orders within the same quarter and with limited advance notice, and we expect such increases and decreases to occur in the future. In addition, although the worldwide wireless handset market is large, growth trends and other variables are often uncertain and difficult to predict. Since the wireless handset market is a consumer-driven market, changes in the economy that affect consumer demand can adversely affect our business and operating results.
Winning business is subject to lengthy, competitive selection processes that require us to incur significant expense. Even if we begin a product design, a customer may decide to cancel or change its product plans, which could cause us to generate no revenues from a product and adversely affect our results of operations.
We are focused on winning competitive bid selection processes, known as “design wins,” to develop semiconductors for use in our customers' products. These selection processes are typically lengthy and can require us to incur significant design and development expenditures and dedicate scarce engineering resources in pursuit of a single customer opportunity. We may not win the competitive selection process and may never generate any revenue despite incurring significant design and development expenditures. These risks are exacerbated by the fact that many of our products and the end products into which our products are incorporated often have very short life cycles. For example, cell-phone manufacturers regularly introduce new or upgraded handsets, often every 12 to 18 months and sometimes more frequently, and will bid out the components for each new model, and often every upgrade of a particular model. Failure to obtain a design win sometimes prevents us from offering an entire generation of a product. This can result in lost revenues and could weaken our position in future competitive selection processes.
Winning a product design does not guarantee sales to a customer. We may experience delays in generating revenue from our products as a result of the lengthy development cycle typically required, or may not realize as much revenue as we had anticipated. In addition, a delay or cancellation of a customer's plans could materially and adversely affect our financial results, as we may have incurred significant expense in the design process and generated little or no revenue. Customers could choose at any time to stop using our products or may fail to successfully market and sell their products, which could reduce demand for our products and materially adversely affect our business, financial condition and results of operations.
Finally, the timing of design wins is unpredictable and implementing production for a major design win or multiple design wins occurring at or around the same time may strain our resources and those of our contract manufacturers. In such event we may be forced to dedicate significant additional resources and incur additional, unanticipated costs and expenses to fulfill such design wins, which may have a material adverse effect on our results of operations.
Competition in our industry could prevent us from growing our revenue and from raising prices to offset increases in costs.
The global semiconductor market is highly competitive. We compete in different target markets to various degrees on the basis of, among other things, quality, technical performance, price, product features, product system compatibility, system-level design capability, engineering expertise, responsiveness to customers, new product innovation, product availability, delivery timing and reliability, and customer sales and technical support. Current and prospective customers for our products evaluate our capabilities against the merits of our direct competitors. Some of our competitors are well established, have a more extensive product portfolio, have substantially greater market share and manufacturing, financial, research and development and marketing resources to pursue development, engineering, manufacturing, marketing and distribution of their products. In addition, many of our competitors have longer independent operating histories, greater presence in key markets, more comprehensive patent protection and greater name recognition. We compete with integrated device manufacturers, or IDMs, and fabless semiconductor companies as well as the internal resources of large, integrated OEMs. Our competitors range from large, international companies offering a wide range of semiconductor products to smaller companies specializing in narrow markets. We expect competition in the markets in which we participate to continue to increase as existing competitors improve or expand their product offerings. In addition, companies not currently in direct competition with us may introduce competing products in the future. Because our products are often building block semiconductors providing functions that in some cases can be integrated into more complex integrated circuits, or ICs, we also face competition from manufacturers of ICs, as well as customers that develop their own IC products.

13

Table of Contents

Our ability to compete successfully depends on elements both within and outside of our control, including industry and general economic trends. During past periods of downturns in our industry, competition in the markets in which we operate intensified as manufacturers of semiconductors reduced prices in order to combat production overcapacity and high inventory levels. The actions of our competitors, particularly in the area of pricing, can have a substantial adverse impact on our revenues, and potentially on revenues in specific industry end markets. In periods where the semiconductor industry experiences significant declines, manufacturers in financial difficulties or in bankruptcy may implement pricing structures designed to ensure short-term market share and near-term survival, rather than securing long-term viability. In addition, many of our competitors have substantially greater financial and other resources than us with which to withstand adverse economic or market conditions and any associated pricing actions of other market participants in the future.
Dependence on contract manufacturing and outsourcing other portions of our supply chain may adversely affect our ability to bring products to market and damage our reputation.
We operate a primarily outsourced manufacturing business model that principally utilizes third-party foundry and module assembly and test capabilities. As a result, we are highly reliant on third-party foundry wafer fabrication capacity, including sole- or single-sourcing for many components or products. For certain of our product families, substantially all of our revenue from those products is derived from semiconductors fabricated by external foundries such as Taiwan Semiconductor Manufacturing Company Ltd. and WIN Semiconductor Corp. Most of our products are designed to be manufactured in a specific process, typically at one particular foundry with a particular contract manufacturer. We also use third-party contract manufacturers for a significant majority of our assembly and test operations, including Amertron Incorporated, ASE Korea Inc., and Hana.
The ability and willingness of our contract manufacturers to perform is largely outside of our control. If one or more of our contract manufacturers or other outsourced providers fails to perform its obligations in a timely manner or at satisfactory quality levels, our ability to bring products to market and our reputation could suffer. Suppliers may, for example, extend lead times, limit supplies, increase prices or discontinue parts due to capacity constraints or other factors. In addition, some parts are not readily available from alternate suppliers due to their unique design or the length of time necessary for design work. If one of our suppliers, particularly a sole- or single-source supplier, ceases to, or is unable to, manufacture such a component or supply is otherwise constrained, for example as a result of a natural disaster, it may be difficult for us to transition the manufacture of that product to another foundry or contract manufacturer or source alternative parts, we may be forced to re-engineer a product and we may fail to timely meet customer demand. This could result in the payment of significant damages by us to our customers, and our net revenue could decline. In such events, our business, financial condition and results of operations would be adversely affected. Furthermore, our agreements with these manufacturers typically require us to forecast product needs and our forecasts may not be accurate, which could adversely affect our business and results of operations.
We review our supply chain on an ongoing basis and may seek to qualify second source manufacturers and suppliers for some components and products. Qualifying such second sources may be a lengthy and potentially costly process.
To the extent we rely on third-party manufacturing relationships, we face the following risks:
inability of our manufacturers to develop manufacturing methods appropriate for our products, and manufacturers' lack of sufficient capacity, or their unwillingness to devote adequate capacity, to produce our products;
product and manufacturing costs that are higher than anticipated;
reduced control over product reliability and delivery schedules;
more complicated supply chains; and
time, expense and uncertainty in identifying and qualifying additional or replacement manufacturers.
Much of our outsourcing takes place in developing countries, and as a result may additionally be subject to geopolitical uncertainty. See “— Our business, financial condition and results of operations could be adversely affected by the political and economic conditions of the countries in which we conduct business and other factors related to our international operations.”
A prolonged disruption of our manufacturing facilities or other significant operations could have a material adverse effect on our business, financial condition and results of operations.
Although we operate using a primarily outsourced manufacturing business model, we also rely on the manufacturing facilities we own, in particular our fabrication facilities in Fort Collins, Colorado and Singapore. We maintain our internal fabrication facilities for products utilizing our innovative materials and processes, to protect our intellectual property, to develop the technology for manufacturing and to ensure supply of certain components. We are currently expanding our Fort Collins facility to support anticipated growth in sales of our proprietary products, particularly for our wireless target market, and to leverage our fixed costs. Unanticipated delays in the construction of this expansion, or the failure of suppliers to timely deliver tools and other equipment needed to commence manufacturing in the expanded facility, could result in significant additional costs, and could result in us being unable to timely satisfy customer demand for the products we plan to

14

Table of Contents

manufacture at the expanded facility, all of which could have a material adverse effect on our business, financial condition and results of operations. In addition, a prolonged disruption or material malfunction of, interruption in, or the loss of operations at, one or more of our production facilities, especially our Fort Collins and Singapore facilities, or the failure to maintain our labor force at one or more of these facilities, would limit our capacity to meet customer demands and delay new product development until a replacement facility and equipment, if necessary, were found. The replacement of any of our manufacturing facilities could take an extended amount of time and significant expenditures on our part before manufacturing operations could restart. The potential delays and significant costs resulting from such steps could have a material adverse effect on our business, financial condition and results of operations.
We are also dependent on various information technology systems, including, but not limited to, networks, applications, and outsourced services. We continually enhance and implement new systems and processes throughout our global operations. Failure of these systems to operate effectively, could disrupt our operations and materially and adversely affect our business, financial condition, and results of operations by harming our ability to accurately forecast sales demand, manage our supply chain and production facilities, fulfill customer orders, and report financial and management information on a timely and accurate basis.
If we or our contract manufacturers suffer loss or significant damage to our factories, facilities or distribution system due to catastrophe, our operations could be seriously harmed.
Our factories, facilities and distribution system, and those of our contract manufacturers, are subject to risk of catastrophic loss due to fire, flood, earthquake or other natural or man-made disasters. The majority of our facilities and those of our contract manufacturers are located in the Pacific Rim region, a region with above average seismic and severe weather activity. In addition, our research and development personnel are concentrated in a few locations, primarily Malaysia, Singapore, South Korea, Fort Collins, Colorado and San Jose, California, with the expertise of the personnel at each such location tending to be focused on one or two specific areas. Any catastrophic natural disaster in those regions or catastrophic loss or significant damage to any of our facilities or those of our contract manufacturers in those regions would likely disrupt our operations, delay production, shipments and revenue. Such events could also result in significant expenses to repair or replace our affected facilities, and in some instances could significantly curtail our research and development efforts in a particular product area or target market. Any catastrophic loss at our Fort Collins, Colorado, San Jose, California, or Singapore facilities would materially and adversely affect our business.
We generally do not have any long-term supply contracts with our contract manufacturers or materials suppliers and may not be able to obtain the products or raw materials required for our business, which could have a material adverse affect on our business.
We either obtain the products we need for our business from third-party contract manufacturers or we obtain the materials we need for our products from suppliers, some of which are our single source suppliers for these materials. We purchase a significant portion of our semiconductor materials and finished goods from a few suppliers and contract manufacturers. For fiscal year 2012, we purchased 54% of the materials for our manufacturing processes from six suppliers. For fiscal year 2011, we purchased 55% of the materials for our manufacturing processes from seven suppliers. Substantially all of our purchases are on a purchase order basis, and we have not generally entered into long-term contracts with our contract manufacturers or suppliers. In the event that these purchase orders or relationships with suppliers are terminated, we cannot obtain sufficient quantities of raw materials at reasonable prices, the quality of the material deteriorates, we fail to satisfy our customers' requirements or we are not able to pass on higher materials or energy costs to our customers, our business, financial condition and results of operations could be adversely impacted.
Our manufacturing processes rely on many materials, including silicon and GaAs wafers, copper lead frames, precious metals, mold compound, ceramic packages and various chemicals and gases. From time to time, suppliers may extend lead times, limit supplies or increase prices due to commodity price increases, capacity constraints or other factors. Although we believe that our current supplies of materials are adequate, shortages could occur in various essential materials due to interruption of supply or increased demand in the industry.

15

Table of Contents

Failure to adjust our supply chain volume due to changing market or other conditions or failure to accurately estimate our customers' demand could adversely affect our results of operations.
We make significant decisions, including determining the levels of business that we will seek and accept, production schedules, levels of reliance on contract manufacturing and outsourcing, personnel needs and other resource requirements, based on our estimates of customer requirements. The short-term nature of commitments by many of our customers and the possibility of rapid changes in demand for their products reduces our ability to accurately estimate future customer requirements. Our results of operations could be harmed if we are unable to adjust our supply chain volume to address market fluctuations, including those caused by the seasonal or cyclical nature of the markets in which we operate, or by other unanticipated events such as natural disasters. In addition, the sale of our products is dependent, to a large degree, on customers whose industries are subject to seasonal or cyclical trends in the demand for their products. For example, the consumer electronics market is particularly volatile and is subject to seasonality related to the holiday selling season, making demand difficult to anticipate.
Severe supply chain disruptions, such as those caused by large scale natural disasters, can adversely affect our, and our customers', ability to source materials and components needed to manufacture products. In such event, even if we are able to promptly resume production of our affected products, if our customers cannot timely resume their own manufacturing following such an event, they may cancel or scale back their orders from us and this may in turn adversely affect our results of operations.
On occasion, customers may require rapid increases in production, which can challenge our resources and reduce margins. We may not be able to purchase sufficient supplies or components or secure sufficient contract manufacturing capacity, to meet such increases in product demand. This could harm our reputation, prevent us from taking advantage of opportunities, reduce revenue growth and subject us to additional liabilities if we are not able to timely satisfy customer orders.
In order to secure components for the production of our products, we may enter into non-cancelable purchase commitments with vendors or make advance payments to suppliers, which could reduce our ability to adjust our inventory or expense levels to declining market demands. Prior commitments of this type have resulted in an excess of parts when demand for our products has decreased. Downturns in the semiconductor industry have in the past caused, and may in the future cause, our customers to reduce significantly the amount of products ordered from us. If demand for our products is less than we expect, we may experience excess and obsolete inventories and be forced to incur additional charges. Conversely, if OEMs order more of our products in any particular quarter than are ultimately required to satisfy end customer demand, inventories at these OEMs may grow in such quarter, which could adversely affect our product revenues in a subsequent quarter as such OEMs would likely reduce future orders until their inventory levels realign with end customer demand. In addition, because certain of our sales, research and development and internal manufacturing overhead expenses are relatively fixed, a reduction in customer demand may decrease our gross margins and operating income.
Our operating results and financial condition could be harmed if the markets into which we sell our products decline.
Visibility into our markets is limited and any decline in our customers' markets would likely result in a reduction in demand for our products. In such an environment, pricing pressures could intensify and, if we were unable to respond quickly, could significantly reduce our gross margins. To the extent we cannot offset recessionary periods or periods of reduced growth that may occur in these markets through increased market share or otherwise, our net revenue may decline and our business, financial condition and results of operations may suffer. For example, we experienced continued, and worse than expected, supply chain corrections and weakness in industrial spending, in China in particular, in fiscal year 2012, which adversely affected our revenues and gross margin. Pricing pressures and competition are especially intense in semiconductor-related industries, which could prevent achievement of our long-term financial goals and could require us to implement additional cost-cutting measures. Furthermore, industry growth rates may not be as forecasted, which could result in us spending on process and product development well ahead of market requirements, which in turn could have a material adverse effect on our business, financial condition and results of operations.
We rely on third parties to provide corporate infrastructure services necessary for the operation of our business. Any failure of one or more of our vendors to provide these services could have a material adverse effect on our business.
We rely on third-party vendors to provide critical corporate infrastructure services, including, among other things, certain services related to accounting, billing, human resources, information technology, or IT, network development and network monitoring. We depend on these vendors to ensure that our corporate infrastructure will consistently meet our business requirements. The ability of these third-party vendors to successfully provide reliable, high quality services is subject to technical and operational uncertainties that are beyond our control. While we may be entitled to damages if our vendors fail to perform under their agreements with us, our agreements with these vendors limit the amount of damages we may receive. In addition, we do not know whether we will be able to collect on any award of damages or that any such damages would be sufficient to cover the actual costs we would incur as a result of any vendor's failure to perform under its agreement with us. Any failure of our corporate infrastructure could have a material adverse effect on our business, financial condition and

16

Table of Contents

results of operations. Upon expiration or termination of any of our agreements with third-party vendors, we may not be able to replace the services provided to us in a timely manner or on terms and conditions, including service levels and cost, that are favorable to us and a transition from one vendor to another vendor could subject us to operational delays and inefficiencies until the transition is complete.
Our gross margin is dependent on a number of factors, including our product mix, customer mix, commodity prices and level of capacity utilization.
Our gross margin is highly dependent on product mix, with proprietary products and products sold into our industrial and automotive target market typically providing higher gross margin than other products. A shift in sales mix away from our higher margin products could adversely affect our future gross margin percentages. In addition, OEMs are becoming increasingly price conscious when they design semiconductors from third party suppliers into their products. This sensitivity, combined with large OEMs' purchasing power, can lead to intense price competition among competing suppliers, which may require us to decrease our prices in order to win a design with an OEM customer. This can, in turn, adversely affect our gross margin. Our margin may also be affected by fluctuations in commodity prices, either directly in the price of the raw materials we buy, or as a result of prices increases passed on to us by our suppliers. Many commodities prices, including those of gold and fuel, have risen significantly in recent months. We do not hedge our exposure to commodity prices and continued increases in commodities prices may adversely affect our gross margin.
Our gross margin is also affected by the timing and amount of our non-product revenue, including non-refundable payments from customers for research and development projects during product development and intellectual property-related revenue such as licensing royalty payments and revenues from sales of intellectual property. Our non-product revenue is generally high margin, but fluctuates significantly from quarter to quarter.
In addition, semiconductor manufacturing requires significant capital investment, leading to high fixed costs, including depreciation expense. Although we outsource a significant portion of our manufacturing activities, we do retain some semiconductor fabrication facilities. We are making substantial capital investments in our Fort Collins, Colorado manufacturing facility and we may not realize the benefit we anticipate from these investments. If we are unable to utilize our owned fabrication facilities at a high level, the fixed costs associated with these facilities, such as depreciation expense, will not be fully absorbed, resulting in higher average unit costs and lower gross margins. In the past, we have experienced periods where our gross margins declined due to, among other things, reduced factory utilization resulting from reduced customer demand, reduced selling prices and a change in product mix towards lower margin devices. Increased competition and the existence of product alternatives, more complex engineering requirements, lower demand and other factors may lead to further price erosion, lower revenues and lower margins for us in the future.
If the tax incentive or tax holiday arrangements we have negotiated in Singapore and other jurisdictions change or cease to be in effect or applicable, in part or in whole, for any reason, or if our assumptions and interpretations regarding tax laws and incentive or holiday arrangements prove to be incorrect, the amount of corporate income taxes we have to pay could significantly increase.
We have structured our operations to maximize the benefit from various tax incentives and tax holidays extended to us in various jurisdictions to encourage investment or employment. For example, we have obtained several tax incentives from the Singapore Economic Development Board, an agency of the Government of Singapore, which provide that certain classes of income we earn in Singapore are subject to tax holidays or reduced rates of Singapore income tax. Each such tax incentive is separate and distinct from the others, and may be granted, withheld, extended, modified, truncated, complied with or terminated independently without any effect on the other incentives. In order to retain these tax benefits in Singapore, we must meet certain operating conditions specific to each incentive relating to, among other things, maintenance of a treasury function, a corporate headquarters function, specified intellectual property activities and specified manufacturing activities in Singapore. Some of these operating conditions are subject to phase-in periods through 2015. The Singapore tax incentives are presently scheduled to expire at various dates generally between 2014 and 2025. Absent such tax incentives, the corporate income tax rate in Singapore that would otherwise apply to us would be 17%. For the fiscal years ended October 28, 2012, and October 30, 2011, the effect of all these tax incentives, in the aggregate, was to reduce the overall provision for income taxes from what it otherwise would have been in such year by approximately $81 million and $82 million, respectively. The tax incentives that we have negotiated in Malaysia are also subject to our compliance with various operating and other conditions. If we cannot or elect not to comply with the operating conditions included in any particular tax incentive, we will lose the related tax benefits. In such event, we could be required to refund material tax benefits previously realized by us with respect to that incentive and, depending on the incentive at issue, could likely be required to modify our operational structure and tax strategy. Any such modified structure or strategy may not be as beneficial to us from an income tax expense or operational perspective as the benefits provided under the present tax concession arrangements.
Our interpretations and conclusions regarding the tax incentives are not binding on any taxing authority, and if our assumptions about tax and other laws are incorrect or if these tax incentives are substantially modified or rescinded we could

17

Table of Contents

suffer material adverse tax and other financial consequences, which would increase our expenses, reduce our profitability and adversely affect our cash flows. In addition, taxable income in any jurisdiction is dependent upon acceptance of our operational practices and intercompany transfer pricing by local tax authorities as being on an arm's length basis. Due to inconsistencies in application of the arm's length standard among taxing authorities, as well as lack of adequate treaty-based protection, transfer pricing challenges by tax authorities could, if successful, substantially increase our income tax expense. We are subject to, and are under, audit in various jurisdictions, and such jurisdictions may assess additional income tax against us. Although we believe our tax positions are reasonable, the final determination of tax audits could be materially different from our recorded income tax provisions and accruals. The ultimate results of an audit could have a material adverse effect on our operating results or cash flows in the period or periods for which that determination is made.
We may be subject to claims of infringement of third-party intellectual property rights or demands that we license third-party technology, which could result in significant expense and loss of our intellectual property rights.
The semiconductor industry is characterized by companies holding large numbers of patents, copyrights, trademarks and trade secrets and by the vigorous pursuit, protection and enforcement of intellectual property rights, including actions by patent-holding companies that do not make or sell products. From time to time, third parties assert against us and our customers and distributors their patent, copyright, trademark, trade secret and other intellectual property rights to technologies that are important to our business.
Litigation or settlement of claims that our products or processes infringe or misappropriate these rights, regardless of their merit, are frequently costly and divert the efforts and attention of our management and technical personnel. In addition, many of our customer agreements, and in some cases our asset sale agreements, require us to indemnify our customers or purchasers for third-party intellectual property infringement claims, which have required and may in the future require that we defend those claims, and might require that we pay damages in the case of adverse rulings. Claims of this sort could also harm our relationships with our customers and might deter future customers from doing business with us. We do not know whether we will prevail in such proceedings given the complex technical issues and inherent uncertainties in intellectual property litigation. If any pending or future proceedings result in an adverse outcome, we could be required to:
cease the manufacture, use or sale of the infringing products, processes or technology;
pay substantial damages for past, present and future use of the infringing technology;
expend significant resources to develop non-infringing technology;
license technology from the third-party claiming infringement, which license may not be available on commercially reasonable terms, or at all;
enter into cross-licenses with our competitors, which could weaken our overall intellectual property portfolio and our ability to compete in particular product categories;
indemnify customers or distributors;
pay substantial damages to our customers or end users to discontinue use or replace infringing technology with non-infringing technology; or
relinquish intellectual property rights associated with one or more of our patent claims, if such claims are held invalid or otherwise unenforceable.
Any of the foregoing results could have a material adverse effect on our business, financial condition and results of operations.
We utilize a significant amount of intellectual property in our business. If we are unable or fail to protect our intellectual property, our business could be adversely affected.
Our success depends in part upon protecting our intellectual property. To accomplish this, we rely on a combination of intellectual property rights, including patents, copyrights, trademarks, trade secrets and similar intellectual property, as well as customary contractual protections with our customers, suppliers, employees and consultants. We may be required to spend significant resources to monitor and protect our intellectual property rights, and even with significant expenditures we may not be able to protect our intellectual property rights valuable to our business. We are unable to predict that:
intellectual property rights that we presently employ in our business will not lapse or be invalidated, circumvented, challenged, or, in the case of third-party intellectual property rights, licensed or sub-licensed to us, be licensed to others;
our intellectual property rights will provide competitive advantages to us;

18

Table of Contents

rights previously granted by third parties to intellectual property rights licensed or assigned to us, including portfolio cross-licenses, will not hamper our ability to assert our intellectual property rights against potential competitors or hinder the settlement of currently pending or future disputes;
any of our pending or future patent, trademark or copyright applications will be issued or have the coverage originally sought; or
our intellectual property rights will be enforced in certain jurisdictions where competition may be intense or where legal protection may be weak.
In addition, our competitors or others may develop products or technologies that are similar or superior to our products or technologies, duplicate our products or technologies or design around our protected technologies. Effective patent, trademark, copyright and trade secret protection may be unavailable or more limited in one or more relevant jurisdictions, relative to those protections available in the United States, may not be applied for or may be abandoned in one or more relevant jurisdictions. We may elect to abandon or divest patents or otherwise not pursue prosecution of certain pending patent applications due to strategic concerns or other factors. In addition, when patents expire, we lose the protection and competitive advantages they provided to us. From time to time we pursue litigation to assert our intellectual property rights, including, in some cases, against third parties with whom we have ongoing relationships, such as customers and suppliers, and third parties may pursue litigation against us. An adverse decision in such types of legal action could limit our ability to assert our intellectual property rights and limit the value of our technology, including the loss of opportunities to sell or license our technology to others or to collect royalty payments based upon successful protection and assertion of our intellectual property against others. In addition, such legal actions or adverse decisions could otherwise negatively impact our business, financial condition and results of operations.
From time to time we may need to obtain additional intellectual property licenses or renew existing license agreements. We are unable to predict whether these license agreements can be obtained or renewed on acceptable terms or at all.
We are subject to risks associated with our distributors' product inventories and product sell-through.
We sell many of our products to customers through distributors who maintain their own inventory of our products for sale to dealers and end users. We limit distributor return rights and we allow limited price adjustments on sales to distributors. Price adjustments may be effected by way of credits for future product or by cash payments to the distributor either in arrears or in advance based on estimates. We record reserves for distributor rights related to these limited stock returns and price adjustments. We recognize revenues for sales to distributors upon delivery to the distributors, net of estimated provisions for these stock return and price adjustment programs. We have recently extended these programs with certain distributors in China and intend to extend them on a selective basis to some of our other distributors in other geographies. The reserves recorded for these programs are based on significant judgments and estimates, using historical experience rates, inventory levels in distribution, current trends and other factors, and there could be significant differences between actual amounts and our estimates. In addition, the timing and mix of payments and credits associated with such price adjustments could change over time, which could adversely affect our cash flows. Sales to distributors accounted for 32% and 37% of our net revenue for fiscal year 2012 and fiscal year 2011, respectively.
If our distributors are unable to sell an adequate amount of their inventory of our products in a given quarter to dealers and end users or if they decide to decrease their inventories for any reason, such as due to adverse global economic conditions or due to any downturn in technology spending, our sales to these distributors and our revenues may decline. We also face the risk that our distributors may purchase, or for other reasons accumulate, inventory levels of our products in any particular quarter in excess of future anticipated sales to end-customers. If such sales do not occur in the time frame anticipated by these distributors for any reason, these distributors may substantially decrease the amount of product they order from us in subsequent periods until their inventory levels realign with end customer demand, which would harm our business and could adversely affect our product revenues in such subsequent periods. Our reserve estimates associated with products stocked by our distributors are based largely on reports that our distributors provide to us on a monthly basis. To date, we believe this data has been generally accurate. To the extent that this resale and channel inventory data is inaccurate or not received in a timely manner, we may not be able to make reserve estimates for future periods accurately or at all.
Unless we and our suppliers continuously improve manufacturing efficiency and quality, our financial performance could be adversely affected.
Manufacturing semiconductors involves highly complex processes that require advanced equipment. We and our suppliers, as well as our competitors, continuously modify these processes in an effort to improve yields and product performance. Defects or other difficulties in the manufacturing process can reduce yields and increase costs. Our manufacturing efficiency will be an important factor in our future financial performance, and we may be unable to maintain or increase our manufacturing efficiency to the same extent as our competitors. For products that we outsource manufacturing, our product yields and performance will be subject to the manufacturing efficiencies of our third-party suppliers.

19

Table of Contents

From time to time, we and our suppliers have experienced difficulty in beginning production at new facilities, transferring production to other facilities, achieving and maintaining a high level of process quality and effecting transitions to new manufacturing processes, all of which have caused us to suffer delays in product deliveries or reduced yields. We and our suppliers may experience manufacturing problems in achieving acceptable yields or experience product delivery delays in the future as a result of, among other things, capacity constraints, construction delays, transferring production to other facilities, upgrading or expanding existing facilities, including our Fort Collins facility, or changing our process technologies, any of which could result in a loss of future revenues. Our results of operations could be adversely affected by any increase in costs related to increases in production capacity if revenues do not increase proportionately.
The enactment of legislation implementing changes in U.S. taxation of international business activities or the adoption of other tax reform policies could materially impact our financial position and results of operations.
Tax bills are introduced from time to time to reform U.S. taxation of international business activities. Depending on the final form of legislation enacted, if any, these consequences may be significant for us due to the large scale of our international business activities. If any of these proposals are enacted into legislation, they could have material adverse consequences on the amount of tax we pay and thereby on our financial position and results of operations.
We make substantial investments in research and development to improve existing and develop new technologies to remain competitive in our business and unsuccessful investments could materially adversely affect our business, financial condition and results of operations.
The semiconductor industry requires substantial investment in research and development in order to develop and bring to market new and enhanced technologies and products. In order to remain competitive, we have made significant investments in research and development and anticipate that we will need to maintain or increase our levels of research and development expenditures. We expect research and development expenses to increase in absolute dollars for the foreseeable future, due to the increasing complexity and number of products we plan to develop. The technologies where we have focused or may focus our research and development expenditures may not become commercially successful. Significant investments in unsuccessful research and development efforts could materially adversely affect our business, financial condition and results of operations. In addition, increased investments in research and development could cause our cost structure to fall out of alignment with demand for our products, which would have a negative impact on our financial results.
Our business would be adversely affected by the departure of existing members of our senior management team or if our senior management team is unable to effectively implement our strategy.
Our success depends, in large part, on the continued contributions of our senior management team, in particular, the services of Mr. Hock E. Tan, our President and Chief Executive Officer. None of our senior management is bound by written employment contracts to remain with us for a specified period. In addition, we do not currently maintain key person life insurance covering our senior management. The loss of any of our senior management could harm our ability to implement our business strategy and respond to the rapidly changing market conditions in which we operate.
If we are unable to attract, train and retain qualified personnel, especially our design and technical personnel, we may not be able to execute our business strategy effectively.
Our future success depends on our ability to retain, attract and motivate qualified personnel, including our management, sales and marketing, legal and finance, and especially our design and technical personnel. We do not know whether we will be able to retain all of these employees as we continue to pursue our business strategy. We have historically encountered difficulties in hiring and retaining qualified engineers because there is a limited pool of engineers with expertise in analog and optoelectronic semiconductor design. Competition for such personnel is intense in the semiconductor industry, particularly in Southeast Asia where qualified engineers are currently in high demand. As the source of our technological and product innovations, our design and technical personnel represent a significant asset. The loss of the services of key employees, especially our key design and technical personnel, or our inability to retain, attract and motivate qualified design and technical personnel, could have a material adverse effect on our business, financial condition and results of operations.
We are subject to warranty claims, product recalls and product liability.
We are currently, and from time to time may be, subject to warranty or product liability claims that have lead, and may in the future lead, to significant expenses as we compensate affected customers for costs incurred related to product quality issues. Although we maintain reserves for reasonably estimable liabilities and purchase product liability insurance, our reserves may be inadequate to cover the uninsured portion of such claims. Conversely, in some cases, amounts we reserve may ultimately exceed our actual liability for particular claims and may need to be reversed. For example, in the second quarter of fiscal year 2009 we identified a product quality issue with a particular component that we took steps to correct, including notifying our customers, offering to replace such components and provide customers with appropriate financial

20

Table of Contents

compensation. Through fiscal year 2012, we had recorded an aggregate of $10 million in charges (including reversals of warranty accrual of $1 million and $6 million in the years ended October 28, 2012 and October 30, 2011, respectively) associated with this issue.
Although we maintain product liability insurance, such insurance is subject to significant deductibles and there is no guarantee that such insurance will be available or adequate to protect against all such claims, or we may elect to self-insure with respect to certain matters. We may incur costs and expenses in the event of any recall of a customer's product containing one of our devices. The process of identifying a recalled product in devices that have been widely distributed may be lengthy and require significant resources, and we may incur significant replacement costs, contract damage claims from our customers and reputational harm. Our customer contracts typically contain warranty and indemnification provisions, and in certain cases may also contain liquidated damages provisions, relating to product quality issues. The potential liabilities associated with such provisions are significant, and in some cases, including in agreements with some of our largest customers, are potentially unlimited. Any such liabilities may greatly exceed any revenues we receive from the relevant products. Costs, payments or damages incurred or paid by us in connection with warranty and product liability claims and product recalls could materially and adversely affect our financial condition and results of operations.
The complexity of our products could result in unforeseen delays or expenses or undetected defects or bugs, which could adversely affect the market acceptance of new products, damage our reputation with current or prospective customers, and materially and adversely affect our operating costs.
Highly complex products such as the products that we offer, may contain defects and bugs when they are first introduced or as new versions are released, or their release may be delayed due to unforeseen difficulties during product development. We have in the past experienced, and may in the future experience, these defects, bugs and delays. If any of our products contain defects or bugs, or have reliability, quality or compatibility problems, we may not be able to successfully design workarounds. Consequently, our reputation may be damaged and customers may be reluctant to buy our products, which could materially and adversely affect our ability to retain existing customers, attract new customers, and our financial results. In addition, these defects or bugs could interrupt or delay sales to our customers. To resolve these problems, we may have to invest significant capital and other resources. Although our products are tested by our suppliers, our customers and ourselves, it is possible that our new products will contain defects or bugs. If any of these problems are not found until after we have commenced commercial production of a new product, we may be required to incur additional development costs and product recall, repair or replacement costs. These problems may also result in claims against us by our customers or others. For example, if a delay in the manufacture and delivery of our products causes the delay of a customer's product delivery, we may be required, under the terms of our agreement with that customer, to compensate the customer for the adverse effects of such delays. In addition, these problems may divert our technical and other resources from other development efforts, and we would likely lose, or experience a delay in, market acceptance of the affected product or products, and we could lose credibility with our current and prospective customers. As a result, our financial results could be materially and adversely affected.
Our business, financial condition and results of operations could be adversely affected by the political and economic conditions of the countries in which we conduct business and other factors related to our international operations.
We sell our products throughout the world. In addition, as at October 28, 2012, approximately 64% of our employees are located outside of the United States. Multiple factors relating to our international operations and to particular countries in which we operate could have a material adverse effect on our business, financial condition and results of operations. These factors include:
changes in political, regulatory, legal or economic conditions;
restrictive governmental actions, such as restrictions on the transfer or repatriation of funds and foreign investments and trade protection measures, including export duties and quotas and customs duties and tariffs;
disruptions of capital and trading markets;
changes in import or export licensing requirements;
transportation delays;
civil disturbances or political instability;
geopolitical turmoil, including terrorism, war or political or military coups;
changes in labor standards;
limitations on our ability under local laws to protect our intellectual property;
nationalization of businesses and expropriation of assets;

21

Table of Contents

changes in tax laws;
currency fluctuations, which may result in our products becoming too expensive for foreign customers or foreign-sourced materials and services becoming more expensive for us; and
difficulty in obtaining distribution and support.
A significant legal risk associated with conducting business internationally is compliance with various and differing anti-corruption and anti-bribery laws and regulations of the countries in which we do business, including the U.S. Foreign Corrupt Practices Act, the U.K. Bribery Act and similar laws in China. In addition, the anti-corruption laws in various countries are constantly evolving and may, in some cases, conflict with each other. Our Code of Ethics and Business Conduct and other policies prohibit us and our employees from offering or giving anything of value to a government official for the purpose of obtaining or retaining business and from engaging in unethical business practices, including kick-backs to or from purely private parties. However, there can be no assurance that all of our employees or agents will refrain from acting in violation of this and our related anti-corruption policies and procedures. Any such violation could have a material adverse effect on our business.
A majority of our products are produced and sourced in Asia, including in China, Malaysia, the Philippines, Singapore, South Korea, Taiwan and Thailand. Any conflict or uncertainty in these countries, including due to political or civil unrest, public health or safety concerns or natural disasters, could have a material adverse effect on our business, financial condition and results of operations. In addition, if the government of any country in which our products are manufactured or sold sets technical standards for products manufactured in or imported into their country that are not widely shared, it may lead certain of our customers to suspend imports of their products into that country, require manufacturers in that country to manufacture products with different technical standards and disrupt cross-border manufacturing relationships which, in each case, could have a material adverse effect on our business, financial condition and results of operations.
In addition, our subsidiaries may require future equity-related financing, and any capital contributions to certain of our subsidiaries may require the approval of the relevant authorities in the jurisdiction in which the subsidiary is incorporated. The approvals are required from the investment commissions or similar agency of the particular jurisdiction and relate to any initial or additional equity investment by foreign entities in local corporations. Our failure to obtain the required approvals and our resulting inability to provide such equity-related financing or capital contributions could have an adverse effect on our business, financial condition and results of operations.
We may not realize the full benefits of our research and development grants.
We have accepted research and development grants, the receipt and amount of which are subject to our satisfaction of certain terms and conditions. During fiscal year 2012, we recorded an aggregate of $7 million in credits to research and development expense and $1 million as a deferred credit for capital expenditures pursuant to these grants. During fiscal year 2011, we recorded an aggregate of $1 million in credits to research and development expense and $1 million as a deferred credit for capital expenditures pursuant to these grants. If we cannot or elect not to satisfy the terms and conditions of any of these grants, expenses incurred in respect of the relevant research and development projects will not be approved for reimbursement, we may be required to return amounts previously paid to us under the grants and further grants may not be available to us in the future.
We may pursue acquisitions, dispositions, investments and joint ventures, which could affect our results of operations.
We may make acquisitions of, and investments in, businesses that offer complementary products, services and technologies, augment our market coverage, or enhance our technological capabilities. We may also enter into strategic alliances or joint ventures to achieve these goals. We cannot assure you that we will be able to identify suitable acquisition, investment, alliance, or joint venture opportunities or that we will be able to consummate any such transactions or relationships on terms and conditions acceptable to us, or that such transactions or relationships will be successful.
These transactions or any other acquisitions or dispositions involve risks and uncertainties. For example, the integration of acquired businesses may not be successful and could result in disruption to other parts of our business. In addition, the integration may require that we incur significant restructuring charges, including as a result of streamlining, or divesting non-core portions of, acquired businesses. To integrate acquired businesses, we must implement our management information systems, operating systems and internal controls, and assimilate and manage the personnel of the acquired operations. The difficulties of these integrations may be further complicated by such factors as the size of the business or entity acquired, geographic distances, lack of experience operating in the geographic market or industry sector of the acquired business, delays and challenges associated with integrating the business with our existing businesses, diversion of management's attention from daily operations of the business, potential loss of key employees and customers of the acquired business, the potential for deficiencies in internal controls at the acquired or combined business, performance problems with the acquired business' technology, difficulties in entering markets in which we have no or limited direct prior experience, exposure to unanticipated liabilities of the acquired business, insufficient revenues to offset increased expenses associated with the acquisition, and our

22

Table of Contents

potential inability to achieve the growth prospects and synergies expected from any such acquisition. Even when an acquired business has already developed and marketed products, there can be no assurance that product enhancements will be made in a timely fashion or that all pre-acquisition due diligence will have identified all material issues that might arise with respect to such acquired business.
Any acquisition may also cause us to assume liabilities and ongoing lawsuits, acquire goodwill and non-amortizable intangible assets that will be subject to impairment testing and potential impairment charges, incur amortization expense related to certain intangible assets, increase our expenses and working capital requirements, and subject us to litigation, which would reduce our return on invested capital. In addition, if the businesses or products lines that we acquire have a different pricing or cost structure than we do, such acquisitions may adversely affect our profitability and reduce our overall margin. Failure to manage and successfully integrate the acquisitions we make or to improve margins of the acquired businesses and products could materially harm our business, operating results and margins.
Any future acquisitions may require significant additional debt or equity financing, which, in the case of debt financing, would increase our leverage and potentially affect our credit ratings, and in the case of equity financing, would be dilutive to our existing shareholders. Any downgrades in our credit ratings associated with an acquisition could adversely affect our ability to borrow by resulting in more restrictive borrowing terms. As a result of the foregoing, we also may not be able to complete acquisitions or other strategic transactions in the future to the same extent as in the past, or at all. These and other factors could harm our ability to achieve anticipated levels of profitability at acquired operations or realize other anticipated benefits of an acquisition, and could adversely affect our business, financial condition and results of operations.
Our business is subject to various governmental regulations, and compliance with these regulations may cause us to incur significant expenses. If we fail to maintain compliance with applicable regulations, we may be forced to recall products and cease their manufacture and distribution, and we could be subject to civil or criminal penalties.
Our business is subject to various significant international and U.S. laws and other legal requirements, including packaging, product content, labor and import/export regulations. These regulations are complex, change frequently and have generally become more stringent over time. We may be required to incur significant expenses to comply with these regulations or to remedy violations of these regulations. Any failure by us to comply with applicable government regulations could result in cessation of our operations or portions of our operations, product recalls or impositions of fines and restrictions on our ability to conduct our operations. In addition, because many of our products are regulated or sold into regulated industries, we must comply with additional regulations in marketing our products.
Our products and operations are also subject to the rules of industrial standards bodies, like the International Standards Organization, as well as regulation by other agencies, such as the U.S. Federal Communications Commission. If we fail to adequately address any of these rules or regulations, our business could be harmed.
We must conform the manufacture and distribution of our semiconductors to various laws and adapt to regulatory requirements in all countries as these requirements change. If we fail to comply with these requirements in the manufacture or distribution of our products, we could be required to pay civil penalties, face criminal prosecution and, in some cases, be prohibited from distributing our products commercially until the products or component substances are brought into compliance.
We are subject to environmental, health and safety laws, which could increase our costs, restrict our operations and require expenditures that could have a material adverse affect on our results of operations and financial condition.
We are subject to a variety of international and U.S. laws and other legal requirements relating to the use, disposal, clean-up of and human exposure to, hazardous materials. Any failure by us to comply with environmental, health and safety requirements could result in the limitation or suspension of production or subject us to future liabilities in excess of our reserves. In addition, compliance with environmental, health and safety requirements could restrict our ability to expand our facilities or require us to acquire costly pollution control equipment, incur other significant expenses or modify our manufacturing processes. In the event of the discovery of new contamination, additional requirements with respect to existing contamination, or the imposition of other cleanup obligations for which we are responsible, we may be required to take remedial or other measures which could have a material adverse effect on our business, financial condition and results of operations.
We also face increasing complexity in our product design and procurement operations as we adjust to new requirements relating to the materials composition of our products, including the restrictions on lead and certain other substances in electronics that apply to specified electronics products sold in the European Union as of July 1, 2006 under the Restriction of Hazardous Substances in Electrical and Electronic Equipment Directive. Other countries, such as the United States, China and Japan, have enacted or may enact laws or regulations similar to the EU legislation. Other environmental regulations may require us to re-engineer our products to utilize components that are more environmentally compatible. Such re-engineering and component substitution may result in excess inventory or other additional costs and could have a material adverse effect on our results of operations.

23

Table of Contents

In addition to the costs of complying with environmental, health and safety requirements, we may in the future incur costs defending against environmental litigation brought by government agencies and private parties. We may be defendants in lawsuits brought by parties in the future alleging environmental damage, personal injury or property damage. A significant judgment against us could harm our business, financial condition and results of operations.
In the last few years, there has been increased media scrutiny and associated reports focusing on a potential link between working in semiconductor manufacturing clean room environments and certain illnesses, primarily different types of cancers. Regulatory agencies and industry associations have begun to study the issue to see if any actual correlation exists. Because we utilize clean rooms, we may become subject to liability claims. In addition, these reports may also affect our ability to recruit and retain employees.
We cannot predict:
changes in environmental or health and safety laws or regulations;
the manner in which environmental or health and safety laws or regulations will be enforced, administered or interpreted;
our ability to enforce and collect under indemnity agreements and insurance policies relating to environmental liabilities; or
the cost of compliance with future environmental or health and safety laws or regulations or the costs associated with any future environmental claims, including the cost of clean-up of currently unknown environmental conditions.
New regulations related to “conflict minerals” may force us to incur additional expenses, may make our supply chain more complex and may result in damage to our reputation with customers.
Pursuant to the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010, or the Dodd-Frank Act, the SEC has adopted new requirements for companies that use certain minerals and metals, known as conflict minerals, in their products, whether or not these products are manufactured by third parties. These requirements will require companies to diligence, disclose and report whether or not such minerals originate from the Democratic Republic of Congo and adjoining countries. The implementation of these new requirements could adversely affect the sourcing, availability and pricing of minerals used in the manufacture of semiconductor devices, including our products. In addition, we will incur additional costs to comply with the disclosure requirements, including costs related to determining the source of any of the relevant minerals and metals used in our products. Since our supply chain is complex, we may not be able to sufficiently verify the origins for these minerals and metals used in our products through the due diligence procedures that we implement, which may harm our reputation. In such event, we may also face difficulties in satisfying customers who require that all of the components of our products are certified as conflict mineral free.
We rely on third-party distributors and manufacturers' representatives, as well as our employee sales representatives, and the failure of these distributors or representatives to perform as expected could reduce our future sales.
In addition to selling products through our employee sales representatives, we also rely on distributors and manufacturers' representatives to sell our products to our customers. This is particularly the case in markets where we do not have a significant physical presence and new markets that we are seeking to enter. We are unable to predict the extent to which our distributors and manufacturers' representatives will be successful in marketing and selling our products. Moreover, many of our distributors and manufacturers' representatives also market and sell competing products. Our relationships with our representatives and distributors may be terminated by either party at any time. Our future performance will depend, in part, on our ability to attract additional distributors or manufacturers' representatives that will be able to market and support our products effectively, especially in markets where we have not previously distributed our products, and on our ability to effectively manage distribution efforts by our remaining global, full-line distributors. If we cannot retain our current distributors or manufacturers' representatives, recruit additional or replacement distributors or manufacturers' representatives, or effectively manage changes to our sales and distributions strategies, our sales and operating results will be harmed.
The average selling prices of products in our markets have historically decreased rapidly and will likely do so in the future, which could harm our revenues and gross profits.
The products we develop and sell are used for high volume applications. As a result, the prices of those products have historically decreased rapidly. Gross profits on our products may be negatively affected by, among other things, pricing pressures from our customers, and the proportion of sales of our wireless and other products into consumer application markets, which are highly competitive and cost sensitive. In the past, we have reduced the average selling prices of our products in anticipation of future competitive pricing pressures, new product introductions by us or our competitors and other factors. In addition, some of our customer agreements provide for volume-based pricing and product pricing roadmaps, which can also reduce the average selling prices of our products over time. Our gross profits and financial results will suffer if we are

24

Table of Contents

unable to offset any reductions in our average selling prices by increasing our sales volumes, reducing manufacturing costs, or developing new and higher value-added products on a timely basis.
We are required to assess our internal control over financial reporting on an annual basis and any adverse findings from such assessment could result in a loss of investor confidence in our financial reports, significant expenses to remediate any internal control deficiencies and ultimately have an adverse effect on our share price.
We are required to assess the effectiveness of our internal control over financial reporting annually, as required by Section 404 of the Sarbanes-Oxley Act. Even though, as at October 28, 2012, we concluded that our internal control over financial reporting was effective, we need to maintain our processes and systems and adapt them as our business grows and changes. This continuous process of maintaining and adapting our internal controls and complying with Section 404 is expensive, time-consuming and requires significant management attention. We cannot be certain that our internal control measures will continue to provide adequate control over our financial processes and reporting and ensure compliance with Section 404. Furthermore, as we grow our business or acquire other businesses, our internal controls may become more complex and we may require significantly more resources to ensure they remain effective. Failure to implement required new or improved controls, or difficulties encountered in their implementation, either in our existing business or in businesses that we may acquire, could harm our operating results or cause us to fail to meet our reporting obligations. If we or our independent registered public accounting firm identify material weaknesses in our internal controls, the disclosure of that fact, even if quickly remedied, may cause investors to lose confidence in our financial statements and the trading price of our ordinary shares may decline.
Remediation of a material weakness could require us to incur significant expense and if we fail to remedy any material weakness, our financial statements may be inaccurate, our ability to report our financial results on a timely and accurate basis may be adversely affected, our access to the capital markets may be restricted, the trading price of our ordinary shares may decline, and we may be subject to sanctions or investigation by regulatory authorities, including the SEC or The Nasdaq Global Select Market. We may also be required to restate our financial statements from prior periods.
A breach of our security systems may have a material adverse effect on our business.
Our security systems are designed to maintain the physical security of our facilities and protect our customers', suppliers' and employees' confidential information. However, we are also dependent on a number of third-party "cloud-based" service providers of critical corporate infrastructure services relating to, among other things, human resources, electronic communication services and certain finance functions, and we are, of necessity, dependent on the security systems of these providers. Accidental or willful security breaches or other unauthorized access by third parties to our facilities, our information systems or the systems of our cloud-based service providers or the existence of computer viruses in our or their data or software could expose us to a risk of information loss and misappropriation of proprietary and confidential information. Any theft or misuse of such information could result in, among other things, unfavorable publicity, damage to our reputation, difficulty in marketing our products, allegations by our customers that we have not performed our contractual obligations, litigation by affected parties and possible financial obligations for liabilities and damages related to the theft or misuse of such information, any of which could have a material adverse effect on our business, profitability and financial condition.  Since the techniques used to obtain unauthorized access or to sabotage systems change frequently and are often not recognized until launched against a target, we may be unable to anticipate these techniques or to implement adequate preventative measures.
Risks Relating to Investments in Singapore Companies
It may be difficult to enforce a judgment of U.S. courts for civil liabilities under U.S. federal securities laws against us, our directors or officers in Singapore.
We are incorporated under the laws of the Republic of Singapore, and certain of our officers and directors are resident outside the United States. Moreover, a majority of our consolidated assets are located outside the United States. Although we are incorporated outside the United States, we have agreed to accept service of process in the United States through our agent designated for that purpose. Nevertheless, since a majority of the consolidated assets owned by us are located outside the United States, any judgment obtained in the United States against us may not be collectible within the United States.
There is no treaty between the United States and Singapore providing for the reciprocal recognition and enforcement of judgments in civil and commercial matters and a final judgment for the payment of money rendered by any federal or state court in the United States based on civil liability, whether or not predicated solely upon the federal securities laws, would, therefore, not be automatically enforceable in Singapore. There is doubt whether a Singapore court may impose civil liability on us or our directors and officers who reside in Singapore in a suit brought in the Singapore courts against us or such persons with respect to a violation solely of the federal securities laws of the United States, unless the facts surrounding such a violation would constitute or give rise to a cause of action under Singapore law. Consequently, it may be difficult for investors to enforce

25

Table of Contents

against us, our directors or our officers in Singapore judgments obtained in the United States, which are predicated upon the civil liability provisions of the federal securities laws of the United States.
We are incorporated in Singapore and our shareholders may have more difficulty in protecting their interest than they would as shareholders of a corporation incorporated in the United States, and we may have more difficulty attracting and retaining qualified board members and executives.
Our corporate affairs are governed by our memorandum and articles of association and by the laws governing corporations incorporated in Singapore. The rights of our shareholders and the responsibilities of the members of our board of directors under Singapore law are different from those applicable to a corporation incorporated in the United States. Therefore, our public shareholders may have more difficulty in protecting their interest in connection with actions taken by our management or members of our board of directors than they would as shareholders of a corporation incorporated in the United States.
In addition, being a public company incorporated in Singapore may make it more expensive for us to obtain director and officer liability insurance, and we may be required to accept reduced coverage or incur substantially higher costs to obtain coverage. These factors could also make it more difficult for us to attract and retain qualified members of our board of directors, particularly to serve on committees of our Board, and qualified executive officers.
For a limited period of time, our directors have general authority to allot and issue new ordinary shares on terms and conditions as may be determined by our board of directors in its sole discretion.
Under Singapore law, we may only allot and issue new ordinary shares with the prior approval of our shareholders in a general meeting. At our 2012 AGM, our shareholders provided our directors with the general authority to allot and issue any number of new ordinary shares until the earlier of (i) the conclusion of our 2013 AGM, (ii) the expiration of the period within which the next annual general meeting is required to be held (i.e., within 15 months from the conclusion of the last general meeting) or (iii) the subsequent revocation or modification of such general authority by our shareholders acting at a duly noticed and convened meeting. Subject to the general authority to allot and issue new ordinary shares provided by our shareholders, the provisions of the Singapore Companies Act and our memorandum and articles of association, our board of directors may allot and issue new ordinary shares on terms and conditions as they may think fit to impose. Any additional issuances of new ordinary shares by our directors may adversely impact the market price of our ordinary shares.
Risks Relating to Owning Our Ordinary Shares
At times, our share price has been volatile and it may fluctuate substantially in the future, which could result in substantial losses for our investors.
The trading price of our ordinary shares has, at times, fluctuated significantly. The trading price of our ordinary shares could be subject to wide fluctuations in response to many risk factors listed in this “Risk Factors” section, and others, many of which are beyond our control, including:
actual or anticipated fluctuations in our financial condition and operating results;
issuance of new or updated research or reports by securities analysts;
fluctuations in the valuation of companies perceived by investors to be comparable to us;
announcement of, or expectation of additional financing efforts;
sales of our ordinary shares by us or our shareholders;
share price and volume fluctuations attributable to inconsistent trading volume levels of our shares; and
changes in our dividend policy.
These fluctuations are often unrelated or disproportionate to our operating performance. These broad market and industry fluctuations, as well as general economic, political and market conditions such as recessions, interest rate changes or international currency fluctuations, may negatively impact the market price of our ordinary shares. You may not realize any return on your investment in us and may lose some or all of your investment. In the past, companies that have experienced volatility in the market price of their stock have been subject to securities class action litigation. We may be the target of this type of litigation in the future. Securities litigation against us could result in substantial costs and divert our management's attention from other business concerns, which could seriously harm our business.
There can be no assurance that we will continue to declare cash dividends or repurchase shares.
Our Board adopted a dividend policy pursuant to which the Company will pay quarterly dividends on our ordinary shares and our Board has also re-approved a program authorizing management to repurchase up to 15 million of the Company's ordinary shares, in their discretion, which authorization will expire at our 2013 AGM. The declaration and payment of any

26

Table of Contents

future dividend is subject to the approval of our Board and our dividend policy could change at any time. Similarly, our share repurchase program may be suspended from time to time or terminated at any time prior to its expiration at the 2013 AGM. There can be no assurance that we will declare cash dividends or repurchase shares in the future in any particular amounts, or at all. Furthermore, we may declare dividends as interim dividends, which are wholly provisional under Singapore law and may be revoked by our Board at any time prior to the payment thereof. The payment of cash dividends is restricted by applicable law and our corporate structure. Pursuant to Singapore law and our articles of association, no dividends may be paid except out of our profits. Also, because we are a holding company, our ability to pay cash dividends on our ordinary shares and to repurchase our shares may be limited by restrictions on our ability to obtain sufficient funds through dividends from subsidiaries, including restrictions under the terms of our credit agreement.
Future dividends and share repurchases, if any, their timing and amount, as well as the relative allocation of cash between dividends and share repurchases, may be affected by, among other factors: our views on potential future capital requirements for strategic transactions, including acquisitions; earnings levels; contractual restrictions; cash position and overall financial condition; and changes to our business model. In addition, the amount we spend and the number of shares we are able to repurchase under our share repurchase program may further be affected by a number of other factors, including the share price and blackout periods in which we are restricted from repurchasing shares. A reduction in, or elimination of, our dividend payments and/or share repurchases could have a negative effect on our share price.
Singapore corporate law may impede a takeover of our company by a third-party, which could adversely affect the value of our ordinary shares.
The Singapore Code on Take-overs and Mergers contains provisions that may delay, deter or prevent a future takeover or change in control of our company for so long as we remain a public company with more than 50 shareholders and net tangible assets of S$5 million or more. Any person acquiring an interest, whether by a series of transactions over a period of time or not, either on their own or together with parties acting in concert with such person, in 30% or more of our voting shares, or, if such person holds, either on their own or together with parties acting in concert with such person, between 30% and 50% (both inclusive) of our voting shares, and such person (or parties acting in concert with such person) acquires additional voting shares representing more than 1% of our voting shares in any six-month period, must, except with the consent of the Securities Industry Council in Singapore, extend a mandatory takeover offer for the remaining voting shares in accordance with the provisions of the Singapore Code on Take-overs and Mergers. While the Singapore Code on Take-overs and Mergers seeks to ensure equality of treatment among shareholders, its provisions may discourage or prevent certain types of transactions involving an actual or threatened change of control of our company. These legal requirements may impede or delay a takeover of our company by a third-party, which could adversely affect the value of our ordinary shares.
Our actual operating results may differ significantly from our guidance.
From time to time, we release guidance regarding our future performance that represents our management's estimates as of the date of release. This guidance, which consists of forward-looking statements, is prepared by our management and is qualified by, and subject to, the assumptions and the other information contained or referred to in the release. Our guidance is not prepared with a view toward compliance with published guidelines of the American Institute of Certified Public Accountants, and neither our independent registered public accounting firm nor any other independent expert or outside party compiles or examines the guidance and, accordingly, no such person expresses any opinion or any other form of assurance with respect thereto.
Guidance is based upon a number of assumptions and estimates that, while presented with numerical specificity, is inherently subject to significant business, economic and competitive uncertainties and contingencies, many of which are beyond our control and are based upon specific assumptions with respect to future business decisions, some of which will change. We generally state possible outcomes as high and low ranges which are intended to provide a sensitivity analysis as variables are changed but are not intended to represent that actual results could not fall outside of the suggested ranges. The principal reason that we release this data is to provide a basis for our management to discuss our business outlook with analysts and investors. We do not accept any responsibility for any projections or reports published by any such persons.
Guidance is necessarily speculative in nature, and it can be expected that some or all of the assumptions of the guidance furnished by us will not materialize or will vary significantly from actual results. Accordingly, our guidance is only an estimate of what management believes is realizable as of the date of release. Actual results will vary from the guidance and the variations may be material. Investors should also recognize that the reliability of any forecasted financial data diminishes the farther in the future that the data is forecast. In light of the foregoing, investors are urged to put the guidance in context and not to place undue reliance on it.
Any failure to successfully implement our operating strategy or the occurrence of any of the events or circumstances set forth in this Annual Report on Form 10-K could result in the actual operating results being different than the guidance, and such differences may be adverse and material.

27

Table of Contents

ITEM 1B.
UNRESOLVED STAFF COMMENTS
None.
ITEM 2.
PROPERTIES
Our principal executive offices are located in Yishun, Singapore, and the headquarters for our U.S. subsidiaries is located in San Jose, California. We conduct our administration, manufacturing, research and development and sales and marketing in both owned and leased facilities. We believe that our owned and leased facilities are adequate for our present operations. The following is a list of our principal facilities and their primary functions.
Site
 
Major Activity
 
Owned/Leased
 
Square Footage
 
Lease Expiration
Yishun, Singapore
 
Administration, Manufacturing, Research and Development and Sales and Marketing
 
Leased
 
116,500
 
November 2015
Depot Road, Singapore
 
Manufacturing
 
Leased
 
50,175
 
October 2030
Senoko, Singapore
 
Manufacturing
 
Owned—Building
Leased—Land
 
52,200
72,000
 
September 2029
Fort Collins, CO, United States
 
Manufacturing and Research and Development
 
Owned
 
983,000
 
 
San Jose, CA, United States
 
Administration, Research and Development and Sales and Marketing
 
Leased
 
139,000
 
November 2015
Seoul, Korea
 
Research and Development and Sales and Marketing
 
Leased
 
72,000
 
October 2015
Penang, Malaysia
 
Manufacturing, Research and
Development, and Administration
 
Owned—Building
Leased—Land
 
318,000
 
May 2051
Boeblingen, Germany
 
Administration, Research and Development and Sales and Marketing
 
Leased
 
19,000
 
April 2015
Regensburg, Germany
 
Manufacturing, Research and Development and Marketing
 
Leased
 
9,100
 
June 2015
Munich, Germany
 
Research and Development

 
Leased
 
6,600
 
September 2013
Turin, Italy
 
Manufacturing and Research and
 
Leased
 
10,500
 
April 2018
 
 
Development
 
Leased
 
22,000
 
June 2017
Shirakawa, Japan
 
Manufacturing and Research and Development
 
Owned
 
17,000
 
 
Sarego, Italy
 
Administration, Manufacturing and Research and Development and Sales and Marketing
 
Owned
 
14,500
 
 
Samorin, Slovakia
 
Manufacturing
 
Leased
 
31,000
 
March 2018
Wuxi, China
 
Administration, Manufacturing and Research and Development and Sales
 
Leased
 
58,000
 
May 2015
Jitra, Malaysia
 
Manufacturing
 
Owned—Building
Leased—Land
 
50,100
258,800
 
April 2051
ITEM 3.
LEGAL PROCEEDINGS
From time to time, we are involved in litigation that we believe is of the type common to companies engaged in our line of business, including commercial disputes and employment issues. As of the date of this filing, we are not involved in any pending legal proceedings that we believe would likely have a material adverse effect on our financial condition, results of operations or cash flows. However, from time to time certain disputes involve claims by third parties that our activities infringe their patent, copyright, trademark or other intellectual property rights. These claims generally involve the demand by a third-party that we cease the manufacture, use or sale of the allegedly infringing products, processes or technologies and/or pay substantial damages or royalties for past, present and future use of the allegedly infringing intellectual property.
Claims that our products or processes infringe or misappropriate any third-party intellectual property rights (including claims arising through our contractual indemnification of our customers) often involve highly complex, technical issues, the outcome of which is inherently uncertain. Moreover, from time to time we pursue litigation to assert our intellectual property rights. Regardless of the merit or resolution of any such litigation, complex intellectual property litigation is generally costly and diverts the efforts and attention of our management and technical personnel.
ITEM 4.
MINE SAFETY DISCLOSURES
None.

28

Table of Contents

PART II

ITEM 5.
MARKET FOR THE REGISTRANT’S COMMON EQUITY, RELATED SHAREHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES
Market Information
Our ordinary shares are listed on The Nasdaq Global Select Market under the symbol “AVGO”. The following table sets forth, for each quarterly period presented, the high and low sales prices of our ordinary shares as reported by The Nasdaq Global Select Market:

 
Market Prices
 
High
 
Low
Fiscal Year ended October 30, 2011
 

 
 

First Quarter (ended January 30, 2011)
$
29.44

 
$
23.77

Second Quarter (ended May 1, 2011)
$
34.60

 
$
27.95

Third Quarter (ended July 31, 2011)
$
39.45

 
$
31.48

Fourth Quarter (ended October 30, 2011)
$
37.99

 
$
26.42

Fiscal Year ended October 28, 2012
 
 
 
First Quarter (ended January 29, 2012)
$
35.00

 
$
27.39

Second Quarter (ended April 29, 2012)
$
39.22

 
$
32.38

Third Quarter (ended July 29, 2012)
$
36.47

 
$
29.70

Fourth Quarter (ended October 28, 2012)
$
37.88

 
$
32.39

Holders
As of December 7, 2012, there were 13 holders of record of our ordinary shares. A substantially greater number of shareholders are “street name” or beneficial holders, whose shares are held of record by banks, brokers and other financial institutions.
Dividends
In fiscal years 2012 and 2011, we declared and paid a the following quarterly cash dividends:
 
Fiscal Year 2012
 
Fiscal Year 2011
First Quarter
$
0.12

 
$
0.07

Second Quarter
$
0.13

 
$
0.08

Third Quarter
$
0.15

 
$
0.09

Fourth Quarter
$
0.16

 
$
0.11

Our board of directors, or Board, has adopted a dividend policy authorizing us to pay a quarterly cash dividend. On December 6, 2012, our Board declared an interim cash dividend of $0.17 per share payable on December 28, 2012 to shareholders of record at the close of business (5:00 p.m.), Eastern Time, on December 17, 2012. In fiscal years 2012 and 2011, we paid an aggregate of $137 million and $86 million, respectively, in dividends to our shareholders.
Our Board reviews our dividend policy regularly and the declaration and payment of any future dividends will be at the discretion and approval of our Board and subject to the Board’s continuing determination that they are in the Company's best interests. Future dividend payments will also depend upon such factors as our earnings level, capital requirements, contractual restrictions, cash position, overall financial condition and any other factors deemed relevant by our Board.
The payment of cash dividends on our ordinary shares is restricted under applicable law and our corporate structure. Pursuant to Singapore law and our articles of association, no dividends may be paid except out of our profits. Also, because we are a holding company, our ability to pay cash dividends on our ordinary shares may be limited by restrictions on our ability to obtain sufficient funds through dividends from subsidiaries.


29

Table of Contents

Issuer Purchases of Equity Securities

Share Repurchase Program

On April 5, 2012, we announced that our Board had authorized the Company to repurchase up to 15 million of its ordinary shares. This replaced the 2011 share repurchase program announced by the Company on June 9, 2011, which expired at our 2012 Annual General Meeting on April 4, 2012, under which the Company was authorized to repurchase up to 15 million of its ordinary shares, not to exceed $500 million in the aggregate. Shares repurchases under the 2012 share repurchase program, if any, will be made in the open market at such times and in such amounts as the Company deems appropriate. The timing and actual number of shares repurchased will depend on a variety of factors including price, market conditions and applicable legal requirements. The 2012 share repurchase program does not obligate the Company to repurchase any specific number of shares and may be suspended or terminated at any time without prior notice. All shares repurchased are immediately retired. The 2012 share repurchase program will expire at the Company's 2013 AGM, unless earlier terminated.

The following table presents details of our share repurchases during the fiscal quarter ended October 28, 2012:
Period
 
Total Number of Shares Purchased
 
Average Price Paid per Share
 
Total Number of Shares Purchased as Part of Publicly Announced Plans or Programs (1)
 
Shares Available Under Repurchase Programs
 
 
 
 
 
 
 
 
(in millions)
 
 
 
 
 
 
 
 
 
July 30, 2012 - August 26, 2012
 
230,757

 
$
36.24

 
230,757

 
14.4

August 27, 2012 - September 23, 2012
 
63,657

 
$
36.15

 
63,657

 
14.3

September 24, 2012 - October 28, 2012
 

 
$

 

 
14.3

Total
 
294,414

 
$
36.22

 
294,414

 
 
 
 
 
 
 
 
 
 
 
(1)
All share repurchases during the period from July 30, 2012 to October 28, 2012 were made in open market transactions in accordance with Rule 10b-18 under the Exchange Act, pursuant to the 2012 share repurchase program discussed above.
Share Performance Graph
The following graph shows a comparison of cumulative total return for the Company’s ordinary shares, the Standard & Poor’s 500 Stock Index, or S&P 500 Index, and the Philadelphia Semiconductor Index, or PHLX Semiconductor Index. The graph covers the period from August 6, 2009 (the first trading day of our ordinary shares on the Nasdaq Global Select Market) to October 26, 2012, the last trading day of our fiscal year 2012. While the initial public offering price of our ordinary shares was $15.00 per share, the graph assumes the initial value of our ordinary shares on August 6, 2009 was the closing sales price of $16.18 per share on that day. The graph and table assume that $100 was invested on August 6, 2009 in each of Avago Technologies Limited ordinary shares, the S&P 500 Index and the PHLX Semiconductor Index and assumes all dividends are reinvested.

30

Table of Contents

The comparisons in the graph below are based on historical data and are not indicative of, or intended to forecast, the possible future performance of our ordinary shares.
 
 
8/6/2009
 
10/30/2009
 
10/29/2010
 
10/28/2011
 
10/26/2012
Avago Technologies Limited
 
$
100

 
$
93

 
$
153

 
$
210

 
$
215

S&P 500 Index
 
100

 
105

 
123

 
133

 
153

PHLX Index
 
100

 
95

 
114

 
132

 
147

The graph and the table above shall not be deemed “filed” with the SEC for the purposes of Section 18 of the Exchange Act or otherwise subject to the liabilities of that section, nor shall it be deemed incorporated by reference in any filing made by us with the SEC, regardless of any general incorporation language in such filing.
Securities Authorized for Issuance Under Equity Compensation Plans
The information required by this item regarding securities authorized for issuance under equity compensation plans is incorporated herein by reference to the definitive Proxy Statement for our 2013 Annual Meeting of Shareholders to be filed with the SEC within 120 days after the end of the fiscal year ended October 28, 2012.
ITEM 6.
SELECTED FINANCIAL DATA
You should read the following selected consolidated financial data together with the information included under the headings “Risk Factors” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our historical financial statements and related notes included elsewhere in this Annual Report on Form 10-K. The selected consolidated statements of operations data for the years ended October 28, 2012, October 30, 2011 and October 31, 2010 and the selected balance sheet data as of October 28, 2012 and October 30, 2011 have been derived from audited historical financial statements and related notes included elsewhere in this Annual Report on Form 10-K. The selected consolidated statements of operations data for the years ended November 1, 2009 and November 2, 2008 and the selected balance sheet data as of

31

Table of Contents

October 31, 2010, November 1, 2009 and November 2, 2008 have been derived from audited historical financial statements and related notes not included in this Annual Report on Form 10-K. The historical financial data may not be indicative of our future performance. We adopted a 52-or 53-week fiscal year beginning with our fiscal year 2008. Our fiscal year ends on the Sunday closest to October 31.
Summary of Five Year Selected Financial Data
 
 
 
Year Ended
 
October 28,
2012
 
October 30,
2011
 
October 31,
2010
 
November 1,
2009
 
November 2,
2008
 
(In millions, except per share amounts)
Statement of Operations Data:
 

 
 

 
 

 
 

 
 

Net revenue
$
2,364

 
$
2,336

 
$
2,093

 
$
1,484

 
$
1,699

Cost of products sold:
 

 
 

 
 

 
 

 
 

Cost of products sold
1,164

 
1,133

 
1,068

 
855

 
981

Amortization of intangible assets
56

 
56

 
58

 
58

 
57

Restructuring charges(1)
2

 

 
1

 
11

 
6

Total cost of products sold
1,222

 
1,189

 
1,127

 
924

 
1,044

Gross margin
1,142

 
1,147

 
966

 
560

 
655

Research and development
335

 
317

 
280

 
245

 
265

Selling, general and administrative
199

 
220

 
196

 
165

 
196

Amortization of intangible assets
21

 
22

 
21

 
21

 
28

Restructuring charges(1)
5

 
4

 
3

 
23

 
6

Advisory agreement termination fee(2)

 

 

 
54

 

Selling shareholder expenses(2)

 

 

 
4

 

Total operating expenses
560

 
563

 
500

 
512

 
495

Income from operations(3)(4)
582

 
584

 
466

 
48

 
160

Interest expense(5)
(1
)
 
(4
)
 
(34
)
 
(77
)
 
(86
)
Loss on extinguishment of debt

 
(20
)
 
(24
)
 
(8
)
 
(10
)
Other income (expense), net
4

 
1

 
(2
)
 
1

 
(4
)
Income (loss) from continuing operations before taxes
585

 
561

 
406

 
(36
)
 
60

Provision for (benefit from) income taxes(6)
22

 
9

 
(9
)
 
8

 
3

Income (loss) from continuing operations
563

 
552

 
415

 
(44
)
 
57

Income from and gain on discontinued operations, net of income taxes(7)

 

 

 

 
26

Net income (loss)
$
563

 
$
552

 
$
415

 
$
(44
)
 
$
83

 
 
 
 
 
 
 
 
 
 
Net income (loss) per share:
 
 
 
 
 
 
 
 
 
Basic:
 
 
 
 
 
 
 
 
 
Income (loss) from continuing operations
$
2.30

 
$
2.25

 
$
1.74

 
$
(0.20
)
 
$
0.27

Income from and gain on discontinued operations, net of income taxes

 

 

 

 
0.12

Net income (loss)
$
2.30

 
$
2.25

 
$
1.74

 
$
(0.20
)
 
$
0.39

Diluted:
 
 
 
 
 
 
 
 
 
Income (loss) from continuing operations
$
2.25

 
$
2.19

 
$
1.69

 
$
(0.20
)
 
$
0.26

Income from and gain on discontinued operations, net of income taxes

 

 

 

 
0.12

Net income (loss)
$
2.25

 
$
2.19

 
$
1.69

 
$
(0.20
)
 
$
0.38

Weighted average shares :
 
 
 
 
 
 
 
 
 
Basic
245

 
245

 
238

 
219

 
214

Diluted
250

 
252

 
246

 
219

 
219

Balance Sheet Data (at end of period):
 
 
 
 
 
 
 
 
 
Cash and cash equivalents
$
1,084

 
$
829

 
$
561

 
$
472

 
$
213

Total assets
2,862

 
2,446

 
2,157

 
1,970

 
1,871

Long-term debt and capital lease obligations
2

 
4

 
4

 
233

 
708

Total shareholders’ equity
2,419

 
2,006

 
1,505

 
1,040

 
780

Other Financial Data:
 
 
 
 
 
 
 
 
 
Dividends declared and paid per share
$
0.56

 
$
0.35

 
$

 
$

 
$

_______________________________________


32

Table of Contents

(1)
Our restructuring charges predominantly represent employee termination benefits. During the year ended October 28, 2012, we incurred restructuring charges of $7 million, of which $5 million was recorded as part of operating expenses and the remainder was recorded as part of cost of products sold. During year ended October 30, 2011, we incurred restructuring charges of $4 million, all of which was recorded as part of operating expenses. During year ended October 31, 2010, we incurred restructuring charges of $4 million, of which $3 million was recorded as part of operating expenses and the remainder was recorded as part of cost of products sold. During year ended November 1, 2009, we incurred restructuring charges of $34 million, of which $23 million was recorded as part of operating expenses and the remainder was recorded as part of cost of products sold. During the year ended November 2, 2008, we incurred restructuring charges of $12 million, of which $6 million was recorded as part of operating expenses and the remainder was recorded as part of cost of products sold.
(2)
The advisory agreement was terminated pursuant to its terms upon completion of our IPO, for a termination fee of $54 million, during the quarter ended November 1, 2009 and no further payments will be made thereunder. We also recorded $4 million in selling shareholder expenses, in connection with the IPO, on behalf of the selling shareholders in the offering.
(3)
Includes share-based compensation expense of $53 million for the year ended October 28, 2012, $38 million for the year ended October 30, 2011, $25 million for the year ended October 31, 2010, $12 million for the year ended November 1, 2009 and $15 million for the year ended November 2, 2008.
(4)
Includes expense recorded in connection with the advisory agreement with investment funds affiliated with each of Kohlberg Kravis Roberts and Co., and Silver Lake Partners, which we refer to together as our Sponsors, of $4 million for the year ended November 1, 2009 and $6 million for the year ended November 2, 2008. The advisory agreement was terminated in connection with our IPO during the quarter ended November 1, 2009.
(5)
Interest expense for the years ended October 30, 2011, October 31, 2010, November 1, 2009 and November 2, 2008 includes interest expense on our 10 1/8% Senior Notes due 2013, or our senior notes, and our Floating Rate Notes due 2013, or our floating rate notes, both of which were fully redeemed during the first quarter of fiscal year 2010, and our 11 7/8% Senior Subordinated Notes due 2015, or senior subordinated notes, which were fully redeemed during the first quarter of fiscal year 2011.
(6)
In fiscal year 2012, provision for income taxes were $22 million. The increase from fiscal year 2011 is primarily attributable to an increase in worldwide income and a change in the jurisdictional mix of income and expense. Provision for income taxes for fiscal year 2011 included a $3 million tax benefit from the write-up of deferred tax assets from U.S. legislation retroactively reinstating the research and development tax credit and a $3 million tax benefit from a change in estimate related to research and development tax credits. In fiscal year 2010, we recorded an income tax benefit totaling $9 million. The income tax benefit is associated with the release of $29 million of deferred tax asset valuation allowances, mainly associated with the Company irrevocably calling our senior subordinated notes for redemption in October 2010, partially offset by the write-off of $6 million of deferred tax assets resulting from the grant of Malaysia tax incentive status, and an increase in overall tax provision due to an increase in worldwide taxable income.
(7)
In February 2006, we sold our Printer ASICs Business to Marvell Technology Group Ltd., or Marvell, for $245 million in cash. Our agreement with Marvell also provides for up to $35 million in additional earn-out payments by Marvell to us based solely on the achievement by Marvell of certain revenue targets in respect of the acquired business subsequent to the acquisition. This transaction closed on May 1, 2006 and no gain or loss was recorded on the initial sale. In May 2008, we received $25 million of the earn-out payment from Marvell and recorded it as a gain on discontinued operations. In November 2006, we sold our Image Sensor operations to Micron Technology, Inc., or Micron, for $53 million. Our agreement with Micron also provides for up to $17 million in additional earn-out payments by Micron to us upon the achievement of certain milestones. During the year ended October 31, 2008, we received earn-out payments of $6 million from Micron.
In October 2007, we sold our Infra-red operations to Lite-On Technology Corporation for $19 million in cash and the right to receive guaranteed cost reductions or rebates based on our future purchases of non infra-red products from Lite-On. We recorded an overall loss from disposal of Infra-red operations of $5 million for fiscal year 2008.

33

Table of Contents

ITEM 7.
MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
This Management’s Discussion and Analysis of Financial Condition and Results of Operations should be read in conjunction with “Selected Financial Data” and our consolidated financial statements and notes thereto which appear elsewhere in this Annual Report on Form 10-K. This discussion may contain forward-looking statements based upon current expectations that involve risks and uncertainties. Our actual results may differ materially from those anticipated in these forward-looking statements as a result of various factors, including those set forth under the caption “Risk Factors” or in other parts of this Annual Report on Form 10-K.
Overview
We are a leading designer, developer and global supplier of a broad range of analog semiconductor devices with a focus on III-V based products. III-V semiconductor materials have higher electrical conductivity and thus tend to have better performance characteristics in radio frequency, or RF, and optoelectronic applications than silicon. We differentiate ourselves through our high performance design and integration capabilities. We serve three primary target markets, with our wireless communications, wired infrastructure and industrial and automotive electronics target markets accounting for the substantial majority of our revenues. Our product portfolio is extensive and includes thousands of products. Applications for our products in these target markets include cellular phones, consumer appliances, data networking and telecommunications equipment, enterprise storage and servers, factory automation and displays. Until recently, we also sold products into the consumer and computing peripherals target market, which has historically represented a small portion of our total net revenue. However, as this became a mature and non-strategic market for us, during fiscal year 2012 we transitioned from developing, manufacturing and selling products into this target market to selling or licensing our intellectual property relevant to this target market, thereby generating royalty revenue instead of product sales revenue. We completed this transition in the fourth quarter of the fiscal year ended October 28, 2012 or fiscal year 2012.
We have a 50-year history of innovation, dating back to our origins within Hewlett-Packard Company. Over the years, we have assembled a large team of analog design engineers, and we maintain design and product development engineering resources around the world. Our locations include two design centers in the United States, five in Asia and four in Europe. We have developed an extensive portfolio of intellectual property that currently includes over 4,300 U.S. and foreign patents and patent applications. Our history and market position enable us to strategically focus our research and development resources to address attractive target markets. We leverage our significant intellectual property portfolio to integrate multiple technologies and create component solutions that target growth opportunities. We design products that deliver high-performance and provide mission-critical functionality. In particular, we were among the first to deliver commercial film bulk acoustic resonator, or FBAR, filters which offer technological advantages over competing filters for smartphones to function more efficiently in today's congested RF spectrum. FBAR technology has historically maintained a significant market share within code division multiple access, or CDMA, and 3G/W-CDMA markets. As cellular carriers move to the 4G/long term evolution, or LTE standard worldwide, we believe these advantages will continue to facilitate rapid adoption of FBAR technology throughout the mobile phone ecosystems. In optical solutions, we were a pioneer in commercializing vertical-cavity surface emitting laser, or VCSEL. Our fiber optic products and our VCSEL-based products, including high bandwidth parallel optic transceivers and modules, have been widely adopted throughout the wired infrastructure and computing industries. In optoelectronics, we are a market leader in submarkets such as optocouplers and optical encoders.
We have a diversified and well-established customer base of over 25,000 end customers, located throughout the world, which we serve through our multi-channel sales and fulfillment system. However, original equipment manufacturers, or OEMs, and distributors typically account for the substantial majority of our sales. We have established strong relationships with leading OEM customers across multiple target markets. Many of our major customer relationships have been in place multiple years and we have supplied multiple products during that time period. Our close customer relationships have often been built as a result of years of collaborative product development which has enabled us to build our intellectual property portfolio and develop critical expertise regarding our customer’s requirements, including substantial system level knowledge. This collaboration has provided us with key insights into our customers and has enabled us to be more efficient and productive and to better serve our target markets and customers. We distribute most of our products through our broad distribution network, and a significant portion of our sales are to two of the largest global electronic components distributors, Avnet, Inc. and Arrow Electronics, Inc. We also have a direct sales force focused on supporting large OEMs.
We focus on maintaining an efficient global supply chain and a variable, low-cost operating model. Accordingly, we have outsourced a majority of our manufacturing operations utilizing third-party foundry and assembly and test capabilities, as well as most of our corporate infrastructure functions. We aim to minimize capital expenditures by focusing our internal manufacturing capacity on products utilizing our innovative materials and processes to protect our intellectual property and to develop the technology for manufacturing, while outsourcing standard complementary metal oxide semiconductor, or CMOS, processes. We also have over 40 years of operating history in Asia, where approximately 57% of our employees are located and

34

Table of Contents

where we produce and source the majority of our products. Our presence in Asia places us in close proximity to many of our customers’ manufacturing facilities and at the center of worldwide electronics manufacturing.
Our business is impacted by general conditions of the semiconductor industry and seasonal demand patterns in our target markets. We believe that our focus on multiple target markets and geographies helps mitigate our exposure to volatility in any single target market.
Erosion of average selling prices of established products is typical of the semiconductor industry. Consistent with trends in the industry, we anticipate that average selling prices will continue to decline in the future. However, as part of our normal course of business, we plan to offset declining average selling prices with efforts to reduce manufacturing costs of existing products and the introduction of new and higher value-added products.
Historically, a relatively small number of customers have accounted for a significant portion of our net revenue. Sales to distributors accounted for 32% and 37% of our net revenue for the years ended October 28, 2012 and October 30, 2011, respectively. During the fiscal year ended October 28, 2012, Foxconn Technology Group accounted for 17% of our net revenue, and our top 10 customers, which included three distributors, collectively accounted for 62% of our net revenue. During the fiscal year ended October 30, 2011, our top 10 customers, which included three distributors, collectively accounted for 54% of our net revenue. No customer accounted for 10% or more of our net revenue during the fiscal year ended October 30, 2011.We expect to continue to experience significant customer concentration in future periods. The loss of, or significant decrease in demand from, any of our top ten customers could have a material adverse effect on our business, results of operation and financial condition.
The demand for our products has been affected in the past, and is likely to continue to be affected in the future, by various factors, including the following:
general economic and market conditions in the semiconductor industry and in our target markets;
our ability to specify, develop or acquire, complete, introduce and market new products and technologies in a cost-effective and timely manner;
the timing, rescheduling or cancellation of expected customer orders and our ability to manage inventory;
the rate at which our present and future customers and end-users adopt our products and technologies in our target markets; and
the qualification, availability and pricing of competing products and technologies and the resulting effects on sales and pricing of our products.
Current uncertainty in global economic conditions, including the ongoing sovereign debt crisis in Europe and the potential fiscal cliff in the United States, still poses significant risks to our business. For example, customers may defer purchases in response to tighter credit and negative financial news, which would in turn negatively affect product demand and our results of operations.
Net Revenue
Substantially all of our net revenue is derived from sales of semiconductor devices which our customers incorporate into electronic products. We serve three primary target markets. Our wireless communications, wired infrastructure and industrial and automotive electronics account for the substantial majority of our revenues. Applications for our products in these target markets include cellular phones, consumer appliances, data networking and telecommunications equipment, enterprise storage and servers, factory automation and displays. We sell our products primarily through our direct sales force, although we also use manufacturers representatives in particular geographic areas and may use them for new customers. We also use distributors for a portion of our business and recognize revenue upon delivery of product to the distributors. Such revenue is reduced for estimated returns and distributor allowances.
Our legacy consumer and computing peripherals target market historically represented a small portion of our total net revenue. As this became a mature and non-strategic market for us, during the fiscal year ended October 28, 2012 or fiscal year 2012, we transitioned from manufacturing and selling products to selling and licensing intellectual property relevant to this market, which was completed in the fourth quarter of fiscal year 2012. As a result of this transition, we now generate royalty revenue instead of product sales from this target market, and due to the structure of these licensing arrangements royalty revenue may fluctuate from period to period. Beginning with the fiscal year ending November 3, 2013, or fiscal year 2013, we will cease to separately present or discuss revenues from the consumer and computing peripherals target market. Instead, they will be combined with revenues from our industrial and automotive electronics target market, which will be referred to as our industrial and other target market.
Costs and Expenses
Total cost of products sold.  Cost of products sold consists primarily of the cost of semiconductor wafers and other materials, and the cost of assembly and test. Cost of products sold also includes personnel costs and overhead related to our

35

Table of Contents

manufacturing operations, including share-based compensation, and related occupancy, computer services and equipment costs, manufacturing quality, order fulfillment, warranty and inventory adjustments, including write-downs for inventory obsolescence, energy costs and other manufacturing expenses. Total cost of products sold also includes amortization of intangible assets and restructuring charges.
Although we outsource a significant portion of our manufacturing activities, we do retain some semiconductor fabrication and assembly and test facilities. If we are unable to utilize our owned fabrication and assembly and test facilities at a desired level, the fixed costs associated with these facilities will not be fully absorbed, resulting in higher average unit costs and lower gross margins.
Research and development.  Research and development expense consists primarily of personnel costs for our engineers engaged in the design and development of our products and technologies, including share-based compensation expense. These expenses also include project material costs, third-party fees paid to consultants, prototype development expenses, allocated facilities costs and other corporate expenses and computer services costs related to supporting computer tools used in the engineering and design process.
Selling, general and administrative.  Selling expense consists primarily of compensation and associated costs for sales and marketing personnel, including share-based compensation expense, sales commissions paid to our independent sales representatives, costs of advertising, trade shows, corporate marketing, promotion, travel related to our sales and marketing operations, related occupancy and equipment costs and other marketing costs. General and administrative expense consists primarily of compensation and associated costs for executive management, finance, human resources and other administrative personnel, outside professional fees, allocated facilities costs and other corporate expenses.
Amortization of intangible assets.  In connection with acquisitions, we recorded intangible assets that are being amortized over their estimated useful lives of six months to 25 years. In connection with these acquisitions, we also recorded goodwill which is not being amortized.
Interest expense.  Substantially all of our historical interest expense was associated with our borrowings incurred in connection with the SPG Acquisition. This debt had been eliminated as at December 1, 2010, principally through cash flows from operations and net proceeds from our initial public offering, or IPO. On March 31, 2011, we terminated our senior secured revolving credit facility, and Avago Technologies Finance Pte. Ltd., or Avago Finance, and certain other subsidiaries of the Company entered into a new credit agreement which initially provided for a $200 million unsecured revolving credit facility. On August 6, 2012, Avago Finance exercised the accordion feature under this credit agreement to increase the aggregate commitments for its unsecured revolving credit facility from $200 million to $300 million. Interest expense in fiscal year 2012 included commitment fees under our current revolving credit facility and amortization of debt issuance costs associated with this credit facility.
Loss on extinguishment of debt.  In connection with the repurchase or redemption of our outstanding indebtedness, we incurred a loss on the extinguishment of debt.
Other income (expense), net.  Other income (expense), net includes interest income, currency gains (losses) on balance sheet remeasurement and other miscellaneous items.
Provision for (benefit from) income taxes.  We have structured our operations to maximize the benefit from various tax incentives and tax holidays extended to us in various jurisdictions to encourage investment or employment. For example, we have obtained several tax incentives from the Singapore Economic Development Board, an agency of the Government of Singapore, which provide that certain classes of income we earn in Singapore are subject to tax holidays or reduced rates of Singapore income tax. Each such tax incentive is separate and distinct from the others, and may be granted, withheld, extended, modified, truncated, complied with or terminated independently without any effect on the other incentives. In order to retain these tax benefits in Singapore, we must meet certain operating conditions specific to each incentive relating to, among other things, maintenance of a treasury function, a corporate headquarters function, specified intellectual property activities and specified manufacturing activities in Singapore. Some of these operating conditions are subject to phase-in periods through 2015. The Singapore tax incentives are presently scheduled to expire at various dates generally between 2014 and 2025, subject in certain cases to potential extensions. Absent such tax incentives, the corporate income tax rate in Singapore that would otherwise apply to us would be 17%. For the fiscal years ended October 28, 2012, October 30, 2011, and October 31, 2010, the effect of all these tax incentives, in the aggregate, was to reduce the overall provision for (benefit from) income taxes from what it otherwise would have been in such year by approximately $81 million, $82 million and $63 million, respectively. In February 2010, the Malaysian government granted us a tax holiday on our qualifying Malaysian income, which is effective for 10 years beginning with our fiscal year 2009. The tax incentives that we have negotiated in Malaysia and other jurisdictions are also subject to our compliance with various operating and other conditions. If we cannot, or elect not to, comply with the operating conditions included in any particular tax incentive, we will lose the related tax benefits and could be required to refund material tax benefits previously realized by us with respect to that incentive and, depending on the incentive at issue, could likely be required to modify our operational structure and tax strategy. Any such modified structure may not be as

36

Table of Contents

beneficial to us from an income tax expense or operational perspective as the benefits provided under the present tax concession arrangements. As a result of the tax incentives and tax holidays, if we continue to comply with the operating conditions, we expect the income from our operations to be subject to relatively lower income taxes than would otherwise be the case under ordinary income tax rules.
Our interpretations and conclusions regarding the tax incentives are not binding on any taxing authority, and if our assumptions about tax and other laws are incorrect or if these tax incentives are substantially modified or rescinded we could suffer material adverse tax and other financial consequences, which would increase our expenses, reduce our profitability and adversely affect our cash flows. In addition, taxable income in any jurisdiction is dependent upon acceptance of our operational practices and intercompany transfer pricing by local tax authorities as being on an arm’s length basis. Due to inconsistencies in application of the arm’s length standard among taxing authorities, as well as lack of adequate treaty-based protection, transfer pricing challenges by tax authorities could, if successful, substantially increase our income tax expense.
Going forward, our effective tax rate will vary based on a variety of factors, including overall profitability, the geographical mix of income before income taxes and the related tax rates in the jurisdictions where we operate, as well as discrete events, such as settlements of future audits. In particular, we may owe significant taxes in jurisdictions outside Singapore during periods when we are profitable in those jurisdictions even though we may be experiencing low operating profit or operating losses on a consolidated basis, potentially resulting in significant tax liabilities on a consolidated basis during those periods. Our historical provision for (benefit from) income taxes are not necessarily reflective of our future results of operations.
Critical Accounting Policies and Estimates
The preparation of financial statements in accordance with generally accepted accounting principles in the United States, or GAAP, requires us to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenue and expenses during the reporting period. We base our estimates and assumptions on current facts, historical experience and various other factors that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities and the accrual of costs and expenses that are not readily apparent from other sources. The actual results experienced by us may differ materially and adversely from our estimates. Our critical accounting policies are those that affect our historical financial statements materially and involve difficult, subjective or complex judgments by management. Those policies include revenue recognition, valuation of long-lived assets, intangible assets and goodwill, inventory valuation and warranty reserves, accounting for income taxes, retirement and post-retirement benefit plan assumptions, and share-based compensation.
Revenue recognition.  We recognize revenue related to sales of our products, net of sales returns and allowances, provided that (i) persuasive evidence of an arrangement exists, (ii) delivery has occurred, (iii) the price is fixed or determinable and (iv) collectibility is reasonably assured. Delivery is considered to have occurred when title and risk of loss have transferred to the customer. We consider the price to be fixed or determinable when the price is not subject to refund or adjustments or when any such adjustments can be estimated. We evaluate the creditworthiness of our customers to determine that appropriate credit limits are established prior to the acceptance of an order. Revenue, including sales to resellers and distributors, is reduced for estimated returns and distributor allowances. We recognize revenue from sales of our products to distributors upon delivery of product to the distributors. An allowance for distributor credits covering price adjustments and scrap allowances is made based on our estimate of historical experience rates as well as considering economic conditions and contractual terms. To date, actual distributor claims activity has been materially consistent with the provisions we have made based on our historical estimates. However, because of the inherent nature of estimates, there is always a risk that there could be significant differences between actual amounts and our estimates. Different judgments or estimates could result in variances that might be significant to reported operating results.
We enter into development agreements with some of our customers and recognize revenue from these agreements upon completion and acceptance by the customer of contract deliverables or milestones or as services are provided, depending on the terms of the arrangement. Revenue is deferred for any amounts billed or received prior to completion of milestones or delivery of services. As we retain the intellectual property generated from these development agreements, costs related to these arrangements are included in research and development expense.
We recognize revenue from the licensing of our intellectual property when the following fundamental criteria are met:(i) persuasive evidence of an arrangement exists, (ii) delivery has occurred, (iii) the sales price is fixed or determinable, and (iv) collection of resulting receivables is reasonably assured. Revenue from upfront payments for the licensing of our patents is recognized when the arrangement is mutually signed, if there is no future delivery or future performance obligation and all other criteria are met. Revenue from guaranteed royalty streams are recognized when paid, or collection is reasonably assured and all other criteria are met. When patent licensing arrangements include royalties for future sales of the licensees’ products

37

Table of Contents

using our licensed patented technology, revenue is recognized when the royalty report is received from the licensee, at which time the sales price is fixed and determinable, provided that all other criteria have been met.
Valuation of long-lived assets, intangible assets and goodwill.  We assess the impairment of long-lived assets, intangible assets and goodwill whenever events or changes in circumstances indicate that the carrying value of such assets may not be recoverable. Factors we consider important, and which could trigger an impairment review of our long-lived and intangible assets, include significant underperformance relative to historical or projected future operating results, significant changes in the manner of our use of the acquired assets or the strategy for our overall business, and significant negative industry or economic trends. An impairment loss must be measured if the sum of the expected future cash flows (undiscounted and before interest) from the use of the asset is less than the net book value of the asset. The amount of the impairment loss will generally be measured as the difference between the net book value of the asset (or asset group) and its (their) estimated fair value.
We perform an annual impairment review of our goodwill during the fourth fiscal quarter of each year, and more frequently if we believe indicators of impairment exist, and we follow the two-step approach in performing the impairment test in accordance with the accounting guidance on goodwill and other intangible assets. The first step of the goodwill impairment test compares the estimated fair value of the reporting unit with the related carrying amount. If the fair value of the reporting unit exceeds its carrying amount, the reporting unit’s goodwill is not considered to be impaired and the second step of the impairment test is unnecessary. If the reporting unit’s carrying amount exceeds its estimated fair value, the second step of the test must be performed to measure the amount of the goodwill impairment loss, if any. The second step of the test compares the implied fair value of the reporting unit’s goodwill, determined in the same manner as the amount of goodwill recognized in a business combination, with the carrying amount of such goodwill. If the carrying amount of the reporting unit’s goodwill exceeds the implied fair value, an impairment loss is recognized in an amount equal to that excess. The process of evaluating the potential impairment of goodwill is highly subjective and requires significant judgment. We have one reporting unit for goodwill impairment testing purposes which is based on the manner in which we operate our business and the nature of those operations, including consideration of how the Chief Operating Decision Maker, as defined in the accounting guidance on segment reporting, manages the business as a whole. We operate as one semiconductor company with sales of semiconductors representing the only material source of revenue. Substantially all products offered incorporate analog functionality and are manufactured under similar manufacturing processes.
For fiscal year 2012, we used the quoted market price of our ordinary shares to determine the fair value of our reporting unit, which is the Company as a whole. No impairment of goodwill was identified based on the annual impairment review during the fourth quarter of fiscal year 2012. A 10% decline in the quoted market prices of our ordinary shares would not impact the result of our goodwill impairment assessment.
The process of evaluating the potential impairment of long-lived assets under the accounting guidance on property, plant and equipment such as our property, plant and equipment and other intangible assets is also highly subjective and requires significant judgment. In order to estimate the fair value of long-lived assets, we typically make various assumptions about the future prospects about our business or the part of our business that the long-lived asset relates to, consider market factors specific to the business and estimate future cash flows to be generated by the business, which requires significant judgment as it is based on assumptions about market demand for our products over a number of future years. Based on these assumptions and estimates, we determine whether we need to take an impairment charge to reduce the value of the long-lived asset stated on our balance sheet to reflect its estimated fair value. Assumptions and estimates about future values and remaining useful lives are complex and often subjective. They can be affected by a variety of factors, including external factors such as the real estate market, industry and economic trends, and internal factors such as changes in our business strategy and our internal forecasts. Although we believe the assumptions and estimates we have made in the past have been reasonable and appropriate, changes in assumptions and estimates could materially impact our reported financial results.
Inventory valuation and warranty reserves.  We value our inventory at the lower of the actual cost of the inventory or the current estimated market value of the inventory, with cost being determined under the first-in, first-out method. We regularly review inventory quantities on hand and record a provision for excess and obsolete inventory based primarily on our forecast of product demand and production requirements. Demand for our products can fluctuate significantly from period to period. A significant decrease in demand could result in an increase in the amount of excess inventory quantities on hand. In addition, our industry is characterized by rapid technological change, frequent new product development and rapid product obsolescence that could result in an increase in the amount of obsolete inventory quantities on hand. Additionally, our estimates of future product demand may prove to be inaccurate, which may cause us to understate or overstate both the provision required for excess and obsolete inventory and cost of products sold. Therefore, although we make every effort to ensure the accuracy of our forecasts of future product demand, any significant unanticipated changes in demand or technological developments could have a significant impact on the value of our inventory and our results of operations. We establish reserves for estimated product warranty costs at the time revenue is recognized. Although we engage in extensive product quality control programs and processes, our warranty obligation has been and may in the future be affected by product failure rates, product recalls, repair or field replacement costs and additional development costs incurred in correcting any product failure, as well as possible claims

38

Table of Contents

for consequential costs. Should actual product failure rates, use of materials or service delivery costs differ from our estimates, additional warranty reserves could be required. In that event, our gross margins would be reduced.
Accounting for income taxes.  We account for income taxes in accordance with the accounting guidance on income taxes. The provision for income taxes is computed using the asset and liability method, under which deferred tax assets and liabilities are recognized for the expected future tax consequences of temporary differences between the financial reporting and tax basis of assets and liabilities, and for operating losses and tax credit carryforwards. Deferred tax assets and liabilities are measured using the currently enacted tax rates that apply to taxable income in effect for the years in which those tax assets are expected to be realized or settled. We record a valuation allowance to reduce deferred tax assets to the amount that is believed more likely than not to be realized. Significant management judgment is required in developing our provision for income taxes, including the determination of deferred tax assets and liabilities and any valuation allowances that might be required against the deferred tax assets. We have considered future taxable income and ongoing prudent and feasible tax planning strategies in assessing the need for valuation allowances. If we determine, in the future, a valuation allowance is required, such adjustment to the deferred tax assets would increase tax expense in the period in which such determination is made. Conversely, if we determine, in the future, a valuation allowance exceeds our requirement, such adjustment to the deferred tax assets would decrease tax expense in the period in which such determination is made. In evaluating the exposure associated with various tax filing positions, we accrue an income tax liability when such positions do not meet the more-likely-than-not threshold for recognition.
The calculation of our tax liabilities involves dealing with uncertainties in the application of complex tax law and regulations in a multitude of jurisdictions. We recognize potential liabilities for anticipated tax audit issues in Singapore and other tax jurisdictions based on our estimate of whether, and the extent to which, additional taxes and interest will be due. If our estimate of income tax liabilities proves to be less than the actual amount ultimately assessed, a further charge to expense would be required. If the payment of these amounts ultimately proves to be unnecessary, the reversal of the liabilities would result in tax benefits being recognized in the period when we determine the liabilities no longer exist.
The gross unrecognized tax benefit decreased by $3 million during fiscal year 2012 to $27 million as of October 28, 2012 from $30 million as of October 30, 2011. The gross unrecognized tax benefit as of October 31, 2010 was 27 million.
We recognize interest and penalties related to unrecognized tax benefits within the provision for (benefit from) income taxes line in the consolidated statement of operations. Accrued interest and penalties are included within the other long-term liabilities line in the consolidated balance sheet. As of October 28, 2012, October 30, 2011, and October 31, 2010, the combined amount of cumulative accrued interest and penalties was approximately $4 million, $6 million and $5 million, respectively.
Retirement and post-retirement benefit plan assumptions.    Retirement and post-retirement benefit plan costs are a significant cost of doing business. They represent obligations that will ultimately be settled sometime in the future and therefore are subject to estimation. Pension accounting is intended to reflect the recognition of future retirement and post-retirement benefit plan costs over the employees' average expected future service to the Company, based on the terms of the plans and investment and funding decisions. To estimate the impact of these future payments and our decisions concerning funding of these obligations, we are required to make assumptions using actuarial concepts within the framework of GAAP. One critical assumption is the discount rate used to calculate the estimated costs. Other important assumptions include the expected long-term return on plan assets, the health care cost trend rate, expected future salary increases, expected future increases to benefit payments, expected retirement dates, employee turnover, retiree mortality rates, and portfolio composition. We evaluate these assumptions at least annually.
The discount rate is used to determine the present value of future benefit payments at the relevant measurement dates — October 28, 2012 and October 30, 2011, for both U.S. and non-U.S. plans, in fiscal years 2012 and 2011, respectively. For fiscal years 2012 and 2011, the U.S. discount rates were based on the results of matching expected plan benefit payments with cash flows from a published pension discount curve. The discount rate for non-U.S. plans was generally based on published rates for high quality corporate bonds. Lower discount rates increase present values of pension liability and subsequent year pension expense; higher discount rates decrease present values of pension liability and subsequent year pension expense.
The expected long-term return on plan assets is estimated using current and expected asset allocations as well as historical and expected returns. Plan assets are valued at fair value. A one percent change in the estimated long-term return on plan assets for assumptions set in 2012 would result in a $0 million impact on non-U.S. pension expense for fiscal year 2013. We have no plan assets under our U.S. plans.
The net periodic retirement and post-retirement benefit costs recorded in consolidated statement of operations excluding curtailments and settlements were $7 million in fiscal year 2012, $6 million in fiscal year 2011, and $4 million in fiscal year 2010.

39

Table of Contents

Share-based compensation expense.  Share-based compensation expense consists of expense for stock options and restricted share units, or RSUs, granted to both employees and non-employees as well as expense associated with Avago Technologies Limited Employee Share Purchase Plan, or ESPP, which was implemented in September 2010. For stock options granted after November 1, 2006, we recognize compensation expense based on the estimated grant date fair value method required under the authoritative guidance using Black-Scholes valuation model with a straight-line amortization method. Since the authoritative guidance requires that share-based compensation expense be based on awards that are ultimately expected to vest, estimated share-based compensation expense for such awards has been reduced for estimated forfeitures. Changes in the estimated forfeiture rates can have a significant effect on share-based compensation expense since the effect of adjusting the rate is recognized in the period the forfeiture estimate is changed.
The weighted-average assumptions utilized for our Black-Scholes valuation model for options and employee share purchase rights granted during the fiscal years ended October 28, 2012, October 30, 2011 and October 31, 2010 are as follows:
 
Options
 
ESPP
 
Year Ended
 
Year Ended
 
October 28, 2012
 
October 30, 2011
 
October 31, 2010
 
October 28, 2012
 
October 30, 2011
 
October 31, 2010
Risk-free interest rate
0.8
%
 
2.0
%
 
1.9
%
 
0.1
%
 
0.1
%
 
0.2
%
Dividend yield
1.4
%
 
0.9
%
 
%
 
1.4
%
 
0.6
%
 
%
Volatility
53.0
%
 
45.0
%
 
45.0
%
 
50.4
%
 
42.6
%
 
42.0
%
Expected term (in years)
5.0

 
5.0

 
5.0

 
0.5

 
0.5

 
0.5

The dividend yields for the years ended October 28, 2012 and October 30, 2011 are based on the historical and expected dividend payouts as of the respective option grant dates. For the year ended October 31, 2010, the dividend yield of zero is based on the fact that we did not intend to declare any cash dividends as of the respective option grant dates during that period. Expected volatility is based on the combination of historical volatility of guideline publicly-traded companies over the period commensurate with the expected term of the options and the implied volatility of guideline publicly-traded companies from traded options with a term of 180 days or greater measured over the last three months. The risk-free interest rate is derived from the average U.S. Treasury Strips rate during the period, which approximates the rate in effect at the time of grant. Our computation of expected term was based on other data, such as the data of peer companies and company-specific attributes that we believe could affect employees’ exercise behavior.
In fiscal year 2010, we began to grant RSUs, which are equity awards that are granted with an exercise price equal to zero and represent the right to receive one of our ordinary shares per RSU immediately upon vesting. We recognize compensation expense for RSUs using the straight-line amortization method based on the fair value of RSUs on the date of grant. The fair value of RSUs is the closing market price of our ordinary shares on the date of grant, which is equal to their intrinsic value on the date of grant.
We also record share-based compensation expense based on an estimate of the fair value of rights to purchase ordinary shares under the ESPP and recognize this share-based compensation expense using the straight-line amortization method.
Employee Bonus Programs. Our employee bonus programs, which are overseen by our Compensation Committee, provide for variable compensation based on the attainment of overall corporate annual targets and functional performance metrics. In the first fiscal quarter of the year, if management determines that it is probable that the targets and metrics will be achieved, the amounts can be reasonably estimated, a variable, proportional compensation accrual is recorded based on an assumed 100 percent achievement of the targets and metrics. The bonus payout levels can be greater if attainment of metrics and targets is greater than 100% and a portion of the payouts may not occur if a minimum floor of performance is not achieved. In subsequent quarters, we monitor and accrue for variable compensation expense based on our actual progress toward the achievement of the annual targets and metrics. The actual achievement of target metrics at the end of the fiscal year, which is subject to approval by our Compensation Committee, may result in the actual variable compensation amounts being significantly higher or lower than the relevant estimated amounts accrued in earlier quarters, which would result in a corresponding adjustment in the fourth fiscal quarter.
Fiscal Year Presentation
We operate on a 52 or 53-week fiscal year which ends on the Sunday closest to October 31. Each of fiscal years 2012, 2011 and 2010 consisted of 52 weeks. Fiscal year 2013 will consist of 53 weeks, with the extra week falling in the first quarter of fiscal year 2013.
The financial statements included in this Annual Report on Form 10-K are presented in accordance with GAAP and expressed in U.S. dollars.

40

Table of Contents

Results from Operations
Year Ended October 28, 2012 Compared to Year Ended October 30, 2011
The following tables set forth our results of operations for the years ended October 28, 2012 and October 30, 2011.
 
Year Ended
 
October 28, 2012
 
October 30, 2011
 
October 28, 2012
 
October 30, 2011
 
(In millions)
 
(As a percentage of net revenue)
Statement of Operations Data:
 

 
 

 
 

 
 

Net revenue
$
2,364

 
$
2,336

 
100
 %
 
100
 %
Cost of products sold:
 
 
 
 
 
 
 
Cost of products sold
1,164

 
1,133

 
49

 
49

Amortization of intangible assets
56

 
56

 
3

 
2

Restructuring charges
2

 

 

 

Total cost of products sold
1,222

 
1,189

 
52

 
51

Gross margin
1,142

 
1,147

 
48

 
49

Research and development
335

 
317

 
14

 
14

Selling, general and administrative
199

 
220

 
8

 
9

Amortization of intangible assets
21

 
22

 
1

 
1

Restructuring charges
5

 
4

 

 

Total operating expenses
560

 
563

 
23

 
24

Income from operations
582

 
584

 
25

 
25

Interest expense
(1
)
 
(4
)
 

 

Loss on extinguishment of debt

 
(20
)
 

 
(1
)
Other income, net
4

 
1

 

 

Income before income taxes
585

 
561

 
25

 
24

Provision for income taxes
22

 
9

 
1

 

Net income
$
563

 
$
552

 
24
 %
 
24
 %
Net revenue.  Net revenue was $2,364 million for fiscal year 2012, compared to $2,336 million for fiscal year 2011, an increase of $28 million or 1%. The slight increase in net revenue was primarily due to strength in our wireless communications target market, largely offset by weakness in our industrial target market. Net revenue from our consumer and computing peripherals target market remained relatively flat compared to fiscal year 2011, benefiting from the last time purchases of product due to our transition from manufacturing and sales of products to an intellectual property licensing and royalty business model in this target market. This transition was completed in the fourth quarter of fiscal year 2012.
Our three largest target markets, by revenue, are wireless communications, wired infrastructure and industrial and automotive electronics. Our legacy consumer and computing peripherals target market has typically represented a much smaller percentage of our overall net revenue. The percentage of total net revenue generated by sales in each of our target markets varies from quarter to quarter, due largely to fluctuations in end-market demand, including the effects of seasonality. The first fiscal quarter is typically our lowest revenue and cash generating quarter due, in part, to holiday shutdowns at many OEM customers and distributors, and the first half of the fiscal year tends to generate lower revenue than the second half. However, typical seasonality and industry cyclicality may be overshadowed by other factors such as wider macroeconomic effects, timing of significant product transitions and launches by large OEMs and new product launches by our competitors. In fiscal year 2012, strength in the smartphone market and strong product ramps at certain of our OEMs in this market more than offset weakness in our net revenue from industrial target market caused by continued supply chain contraction. Weakness in industrial spending, in China in particular, also adversely impacted revenue from our industrial target market in fiscal year 2012.

41

Table of Contents

Historically, a relatively small number of customers have accounted for a significant portion of our net revenue. During the fiscal year ended October 28, 2012, Foxconn Technology Group companies accounted for 17% of our net revenue. Our top 10 customers for fiscal year ended October 28, 2012, which included three distributors each, collectively accounted for 62% of our net revenue. However, we believe that aggregate sales of our products to certain of our customers exceeds the amount of our direct sales to them. For example, we believe our aggregate sales to two OEMs, when direct sales are combined with indirect sales to them through the respective contract manufacturers that they utilize, each accounted for more than 10% of our net revenues, for the fiscal year ended October 28, 2012. We expect to continue to experience significant customer concentration in future periods. The loss of, or significant decrease in demand from, any of our top ten customers could have a material adverse effect on our business, results of operation and financial condition.
Net revenue by target market data is derived from our understanding of our end customers’ primary markets, and was as follows:
 
Year Ended
 
 
% of Net Revenue
October 28, 2012
 
October 30, 2011
 
Change
Wireless communications
45
%
 
38
%
 
7
 %
Wired infrastructure
28

 
28

 

Industrial and automotive electronics
22

 
29

 
(7
)
Consumer and computing peripherals
5

 
5

 

Total net revenue
100
%
 
100
%
 
 


 
Year Ended
 
 
Net Revenue
October 28,
2012
 
October 30,
2011
 
Change
 
(In millions)
Wireless communications
$
1,064

 
$
887

 
$
177

Wired infrastructure
662

 
659

 
3

Industrial and automotive electronics
518

 
672

 
(154
)
Consumer and computing peripherals
120

 
118

 
2

Total net revenue
$
2,364

 
$
2,336

 
$
28

Net revenue from our wireless communications target market increased in fiscal year 2012 compared with the corresponding prior year periods due to continued strength in mobile smartphone sales and new handset ramps incorporating our products at major smartphone OEMs. We experienced higher demand for our multi-mode, multi-band power amplifiers, in particular, as well as for our FBAR duplexers in fiscal year 2012. Demand for FBAR duplexers in fiscal year 2012 also benefited from transitions by various cellular carriers to the 4G/LTE standard.
Net revenue from our wired infrastructure target market remained relatively flat in fiscal year 2012, compared with fiscal year 2011. During fiscal year 2012, we saw strong growth from sales of our ASICs used in data center applications compared to fiscal year 2011. Revenues from this target market for fiscal year 2012 also reflect an increase in development agreement and intellectual property licensing revenue of $12 million. However for fiscal year 2012, these effects were substantially offset by a decrease in high-performance computing hardware sales, as well as a pullback in sales of proprietary parallel optics at several of our large communications OEM customers due to weak core routing spending with service providers.
Net revenue from our industrial and automotive electronics target market decreased in fiscal year 2012 compared with fiscal year 2011. This decrease was due primarily to continued, and worse than expected, supply chain corrections and weakness in industrial spending, in China in particular, in fiscal year 2012 compared with fiscal year 2011. These effects were partially offset by increases in revenue from development agreements and the sale of certain of our intellectual property of approximately $6 million, for fiscal year 2012.
Net revenue from our legacy consumer and computing peripherals target market increase slightly in fiscal year 2012 compared with fiscal year 2011. This was largely due to the last time purchases of product in the third quarter of fiscal year 2012, resulting from our transition from manufacturing and sales of products to an intellectual property licensing and royalty business model in this target market. The transition to the intellectual property licensing royalty model was completed in the fourth quarter of fiscal year 2012. During the fiscal year 2012, we generated approximately $23 million in intellectual property-

42

Table of Contents

related revenue from this target market. Due to the structure of these licensing arrangements, royalty revenue may fluctuate from period to period.
Gross margin.  Gross margin was $1,142 million for fiscal year 2012 compared to $1,147 million for fiscal year 2011, a decrease of $5 million. As a percentage of net revenue, gross margin decreased slightly to 48% for fiscal year 2012, compared to 49% fiscal year 2011. The slight decrease in gross margin in fiscal year 2012 was driven by product mix, with a higher proportion of sales into our wireless communication target market compared to sales into our higher-margin industrial and automotive electronics target market. This mix effect was substantially offset by (i) an increase in revenue from development agreements and sales and licensing of intellectual property of $51 million in fiscal year 2012 (ii) a $12 million decrease in cost of products sold due to a revision in wafer cost allocation methodology during fiscal year 2012, and (iii) a $8 million decrease in depreciation expense during the fiscal year 2012, resulting from a change in the duration of the useful lives of certain of our manufacturing equipment which occurred in the fourth quarter of fiscal year 2011. During the fiscal quarter ended January 29, 2012, we revised our cost allocation methodology to fully burden with overhead costs the expense for wafers used in research and development projects that are processed through our internal fabrication facilities, or R&D wafer cost allocation methodology.
Research and development.  Research and development expense was $335 million for fiscal year 2012, compared to $317 million for fiscal year 2011, an increase of $18 million or 6%. As a percentage of net revenue, research and development expenses remained flat at 14% for fiscal year 2012, compared to fiscal year 2011. The majority of this increase, in absolute dollars, resulted from investments in our wired infrastructure and wireless communications solutions. Part of the increase was attributable to a $15 million increase in research and development project consumables and services, $12 million of which was due to the change in R&D wafer cost allocation methodology, as discussed above under Gross margin, which increased gross margin by a corresponding amount. The overall dollar increase in research and development expense was also attributable to an $8 million increase in depreciation expense related to capital expenditures supporting research and development efforts, a $7 million increase in salaries and employee benefits expense, and a $6 million increase in share-based compensation expense attributable to grants of share-based awards at higher fair market values and to our ESPP. These increases were partially offset by a $13 million decrease in accrued incentive compensation expense related to our employee bonus program, which is a variable expense related to our achievement of program performance metrics, and a $3 million decrease in computer software expenses in fiscal year 2012, compared to the fiscal year 2011. The overall dollar increase in research and development expense is also net of $7 million in accrued reimbursements pursuant to research and development grants. We expect research and development expenses to increase in absolute dollars for the foreseeable future, due to the increasing complexity and number of products we plan to develop.
Selling, general and administrative.  Selling, general and administrative expense was $199 million for the year ended October 28, 2012 compared to $220 million for the year ended October 30, 2011, a decrease of $21 million or 10%. As a percentage of net revenue, selling, general and administrative expense decreased slightly to 8% for the year ended October 28, 2012 compared to 9% for the year ended October 30, 2011. Changes in components of selling, general and administrative expense for the fiscal year 2012, compared to the fiscal year 2011, consisted of a $13 million decrease in legal expenses related to offensive litigation matters, a $8 million decrease in accrued incentive compensation expense related to our performance-based employee bonus program, a $4 million decrease in external services related to consulting and IT, a $3 million decrease in depreciation expense, and a $2 million decrease in salaries and wages expense, partially offset by a $7 million increase in share-based compensation expense attributable to grants of share-based awards at higher fair market values and to our ESPP.
Amortization of intangible assets.  Total amortization of intangible assets incurred was $77 million and $78 million, respectively, for fiscal years 2012 and 2011.
Restructuring charges.   We incurred total restructuring charges of $7 million for fiscal year 2012 compared to $4 million for fiscal year 2011, both predominantly representing employee termination costs.
Interest expense.  Interest expense was $1 million for fiscal year 2012, compared to $4 million for fiscal year 2011, which represents a decrease of $3 million. The decrease is primarily due to the redemption of the remaining $230 million aggregate principal amount of our senior subordinated rate notes on December 1, 2010.
Loss on extinguishment of debt.  During fiscal year 2011, we redeemed $230 million aggregate principal amount of our senior subordinated notes. The redemption of the senior subordinated notes resulted in a loss on extinguishment of debt of $19 million. During fiscal year 2011, we also terminated our senior secured revolving credit facility. There were no outstanding loan borrowings under this facility at the time of termination. This termination resulted in a loss on extinguishment of debt of $1 million, related to the write-off of debt amortization costs and other related expenses. See Note 7. “Borrowings” to the Consolidated Financial Statements.
Other income, net.  Other income, net includes interest income, foreign currency gain (loss), loss on other-than-temporary impairment of investment and other miscellaneous items. Other income, net was $4 million for fiscal year 2012 compared to

43

Table of Contents

other income, net of $1 million for fiscal year 2011. This increase in other income, net for fiscal year 2012 is primarily attributable to an increase in interest income due to higher cash balances compared to prior year.
Provision for income taxes.  We recorded an income tax expense totaling $22 million for fiscal year 2012 compared to an income tax expense of $9 million for fiscal year 2011. The increase is primarily attributable to an increase in worldwide income, change in the jurisdictional mix of income and expense and the expiration of the research and development tax credit in the U.S. on December 31, 2011. The provision for income taxes in 2011 is net of a $3 million tax benefit for the increase in deferred tax assets from U.S. legislation retroactively reinstating the research and development tax credit and a $3 million tax benefit from a change in estimate related to research and development tax credits.
Year Ended October 30, 2011 Compared to Year Ended October 31, 2010
The following tables set forth our results of operations for the years ended October 30, 2011 and October 31, 2010.
 
Year Ended
 
October 30, 2011
 
October 31, 2010
 
October 30, 2011
 
October 31, 2010
 
(In millions)
 
(As a percentage of net revenue)
Statement of Operations Data:
 

 
 

 
 

 
 

Net revenue
$
2,336

 
$
2,093

 
100
 %
 
100
 %
Cost of products sold:
 

 
 

 
 

 
 

Cost of products sold
1,133

 
1,068

 
49

 
51

Amortization of intangible assets
56

 
58

 
2

 
3

Restructuring charges

 
1

 

 

Total cost of products sold
1,189

 
1,127

 
51

 
54

Gross margin
1,147

 
966

 
49

 
46

Research and development
317

 
280

 
14

 
14

Selling, general and administrative
220

 
196

 
9

 
9

Amortization of intangible assets
22

 
21

 
1

 
1

Restructuring charges
4

 
3

 

 

Total operating expenses
563

 
500

 
24

 
24

Income from operations
584

 
466

 
25

 
22

Interest expense
(4
)
 
(34
)
 

 
(2
)
Loss on extinguishment of debt
(20
)
 
(24
)
 
(1
)
 
(1
)
Other income (expense), net
1

 
(2
)
 

 

Income before income taxes
561

 
406

 
24

 
19

Provision for income taxes
9

 
(9
)
 

 
(1
)
Net income
$
552

 
$
415

 
24
 %
 
20
 %
Net revenue.  Net revenue was $2,336 million for fiscal year 2011, compared to $2,093 million for fiscal year 2010, an increase of $243 million or 12%. Net revenue increased during fiscal year 2011 primarily due to strength in our wired infrastructure target market, as well as strength in our wireless communications and industrial and automotive electronics target markets. The year over year increase in net revenue was partially due to improved general economic conditions during the year, compared to fiscal year 2010 and also due to our introduction of a number of new, proprietary products, which helped us to grow net revenues substantially over the period.


44

Table of Contents

Net revenue by target market data is derived from our understanding of our end customers’ primary markets, and was as follows:
 
Year Ended
 
 
% of Net Revenue
October 30,
2011
 
October 31,
2010
 
Change
Wireless communications
38
%
 
38
%
 
 %
Industrial and automotive electronics
29

 
29

 

Wired infrastructure
28

 
24

 
4

Consumer and computing peripherals
5

 
9

 
(4
)
Total net revenue
100
%
 
100
%
 
 

 
Year Ended
 
 
Net Revenue
October 30,
2011
 
October 31,
2010
 
Change
 
(In millions)
 
 
Wireless communications
$
887

 
$
796

 
$
91

Industrial and automotive electronics
672

 
605

 
67

Wired infrastructure
659

 
509

 
150

Consumer and computing peripherals
118

 
183

 
(65
)
Total net revenue
$
2,336

 
$
2,093

 
$
243

Net revenue from wireless communications products, increased in absolute dollars in fiscal year 2011, compared with fiscal year 2010, while remaining flat as a percentage of net revenue. The launch of next-generation smartphones at leading new and existing OEM customers, which incorporate many of our proprietary products such as 3G and 4G radio frequency filters and power amplifiers drove revenue growth during fiscal year 2011.
Net revenue from our industrial and automotive electronics products increased in absolute dollars in fiscal year 2011, compared with fiscal year 2010, while remaining flat as a percentage of net revenue. The increase in the fiscal year 2011 was due to particular strength in sales of optocouplers, industrial fiber optic transceivers and industrial motion encoders. We continued to benefit from strong demand in renewable energy, smart power grid installations and transportation applications, in both developed economies and emerging economies such as China. Demand in our industrial market slowed towards the end of fiscal year 2011 as a result of slower economic growth in China and a slow-down in the renewable energy sector. We believe this has caused some ongoing inventory corrections in the supply chain in this target market. The effects of this were particularly noticeable in demand for servo drives and inverters for renewable energy applications in Europe and Asia-Pacific towards the end of fiscal year 2011.
Net revenue from our wired infrastructure target market increased substantially, in absolute dollars and also increased as a percentage of net revenue, in fiscal year 2011, compared with fiscal year 2010. Spending on enterprise networking data centers, storage systems and core routing grew during the year. In addition, we introduced a number of new fiber optic transceivers and ASICs in fiscal year 2011, compared with fiscal year 2010, which contributed to the increase in revenue. The strong growth in sales of our ASIC products compared to fiscal year 2010 was due primarily to strength in next-generation data center switching. Increase in revenue recognized on development contracts for future ASIC products in fiscal year 2011, compared with fiscal year 2010, also contributed to the increase in revenue.
Net revenue from our consumer and computing peripheral target market decreased in absolute dollars and as a percentage of net revenue in fiscal year 2011, compared with fiscal year 2010. This reflected a decline in sales of optical sensors used in optical mice and sales of motion encoders used in applications such as optical disc drives and printers in fiscal year 2011. Net revenue from this target market during this period was also affected by ongoing softness in the personal computer and printer market.
Gross margin.  Gross margin was $1,147 million for fiscal year 2011 compared to $966 million for fiscal year 2010, an increase of $181 million or 19%. As a percentage of net revenue, gross margin increased to 49% for fiscal year 2011 from 46% for fiscal year 2010. The increase in gross margin percentage was primarily attributable to continuing improvements in product mix. During fiscal year 2011, compared fiscal year 2010, a higher proportion of our net revenues were from products sold into the wired infrastructure target market and from sales of our proprietary products, which generally earn higher gross margins than our other products, partially offset by continued strong sales of our wireless products and changes in the mix of our wireless products. Gross margin benefited from a reduction in depreciation expense of $3 million in fiscal year 2011 resulting from a change in the duration of the useful lives of certain of our assembly and test equipment. We also released charges of

45

Table of Contents

$7 million during fiscal year 2011 for warranty costs compared to charges of $12 million recorded in fiscal year 2010. See Note 15. “Commitments and Contingencies” to the Consolidated Financial Statements. 
Research and development.  Research and development expense was $317 million for fiscal year 2011, compared to $280 million for fiscal year 2010, an increase of $37 million or 13%. As a percentage of net revenue, research and development expenses remained flat at 14% for fiscal year 2011 compared to fiscal year 2010. The increase in absolute dollars was primarily attributable to $13 million in additional research and development project materials and supplies, an $8 million increase in compensation expense resulting from annual salary adjustment, a $6 million increase in share-based compensation expense due to grants of share-based awards at higher fair market values, a $5 million increase in depreciation expense and a $2 million increase in hardware test services in fiscal year 2011 as compared to fiscal year 2010. These increases were partially offset by $1 million in accrued reimbursements pursuant to research and development grants. 
Selling, general and administrative.  Selling, general and administrative expense was $220 million for the year ended October 30, 2011 compared to $196 million for the year ended October 31, 2010, an increase of $24 million or 12%. As a percentage of net revenue, selling, general and administrative expense remained flat at 9% for the year ended October 30, 2011 compared to the year ended October 31, 2010. The increase in absolute dollars was attributable to an $8 million increase in legal expenses related to offensive litigation matters initiated in fiscal year 2010, a $7 million increase in compensation expense resulting from annual salary adjustments, a $6 million increase in share-based compensation expense due to grants of share-based awards at higher fair market values, a $2 million increase in sales commissions expense paid to our sales employees, and a $2 million increase in third party IT fees, partially offset by a $5 million decrease in incentive compensation expense related to our employee bonus program, which is a variable expense related to our overall profitability in fiscal year 2011 as compared to fiscal year 2010
Amortization of intangible assets.  Total amortization of intangible assets incurred was $78 million and $79 million, respectively, for fiscal years 2011 and 2010.
Restructuring charges.  During fiscal year 2011, we incurred total restructuring charges of $4 million, compared to $4 million for fiscal year 2010, both predominantly representing employee termination costs.  
Interest expense.  Interest expense was $4 million for fiscal year 2011, compared to $34 million for fiscal year 2010, which represents a decrease of $30 million. The decrease is primarily due to the redemption of the remaining $230 million aggregate principal amount of our senior subordinated rate notes on December 1, 2010. 
Loss on extinguishment of debt.  During fiscal year 2011, we redeemed $230 million aggregate principal amount of our senior subordinated notes. The redemption of the senior subordinated notes resulted in a loss on extinguishment of debt of $19 million. During fiscal year 2011, we also terminated our senior secured revolving credit facility. There were no outstanding loan borrowings under this facility at the time of termination. This termination resulted in a loss on extinguishment of debt of $1 million, related to the write-off of debt amortization costs and other related expenses. During fiscal year 2010, we redeemed $318 million aggregate principal amount of our senior fixed rate notes and the remaining $46 million aggregate principal amount of our senior floating rate notes. The redemption of the senior fixed rate notes and senior floating rate notes in fiscal year 2010 resulted in a loss on extinguishment of debt of $24 million. See Note 7. “Borrowings” to the Consolidated Financial Statements. 
Other income (expense), net.  Other income (expense), net includes interest income, foreign currency gain (loss), loss on other-than-temporary impairment of investment and other miscellaneous items. Other income, net was $1 million for fiscal year 2011 compared to other expense, net was $2 million for fiscal year 2010. The increase to other income, net for fiscal year 2011, compared to other expense, net for fiscal year 2010 is primarily attributable to a decrease in foreign currency losses, and an increase in interest income due primarily to higher cash balances compared to the same period in prior year. 
Provision for (benefit from) income taxes.  We recorded an income tax expense totaling $9 million for fiscal year 2011 compared to an income tax benefit of $9 million for fiscal year 2010. The provision for income taxes in 2011 included a $3 million tax benefit for the increase in deferred tax assets from U.S. legislation retroactively reinstating the research and development tax credit and a $3 million tax benefit from a change in estimate related to research and development tax credits. The benefit from income taxes in 2010 included a $29 million benefit from the release of deferred tax asset valuation allowances, mainly associated with irrevocably calling our senior subordinated notes for redemption in October 2010, partially offset by a write-off of $6 million of deferred tax assets resulting from the grant of a new tax incentive in Malaysia.
Liquidity and Capital Resources
The following section discusses our principal liquidity and capital resources as well as our principal liquidity requirements and sources and uses of cash. Our cash and cash equivalents are maintained in highly liquid investments with remaining maturities of 90 days or less at the time of purchase. We believe our cash equivalents are liquid and accessible. The majority of our cash and cash equivalents are held in financial institutions in Singapore.

46

Table of Contents

Our primary sources of liquidity as at October 28, 2012 consisted of: (1) approximately $1,084 million in cash and cash equivalents, (2) cash we expect to generate from operations and (3) our $300 million revolving credit facility, which is committed until March 31, 2015, all of which is available to be drawn. Our short-term and long-term liquidity requirements primarily arise from: (i) working capital requirements, (ii) research and development and capital expenditure needs, including acquisitions from time to time and (iii) quarterly dividend payments (if and when declared by our Board) and any share repurchases we may choose to make under our share repurchase program. Our ability to fund these requirements will depend on our future cash flows, which are determined by future operating performance and are, therefore, subject to prevailing global macroeconomic conditions and financial, business and other factors, some of which are beyond our control.
In June 2011, our board of directors authorized the repurchase of up to 15 million of the Company’s outstanding ordinary shares, not to exceed $500 million, in the aggregate, referred to as the 2011 share repurchase program, in open market transactions prior to our 2012 Annual General Meeting of the Company, which was held on April 4, 2012. During the year ended October 28, 2012, we repurchased an aggregate of 2.8 million shares for an aggregate purchase price of $85 million, under the 2011 share repurchase program. On April 4, 2012, our Board of Directors authorized the Company to repurchase up to 15 million of its ordinary shares, referred to as the 2012 share repurchase program. For the fiscal year ended October 28, 2012, the Company repurchased 0.7 million shares for an aggregate of purchase price of $25 million in cash under the 2012 share repurchase program. Share repurchases under our share repurchase programs are made in the open market at such times and in such amounts as the Company deems appropriate. The timing and actual number of shares repurchased depend on a variety of factors including price, market conditions and applicable legal requirements. The 2012 share repurchase program does not obligate the Company to repurchase any specific number of shares and may be suspended or terminated at any time without prior notice. The 2012 share repurchase program will expire at the Company's 2013 AGM, unless earlier terminated.
Our cash and cash equivalents increased by $255 million to $1,084 million at October 28, 2012 from $829 million at October 30, 2011 primarily as a result of $693 million in cash provided by operating activities and $44 million in cash received from the issuance of ordinary shares pursuant to the exercise of options under our employee share option plans and purchase rights under our employee share purchase plan. Partially offsetting this increase were $241 million cash paid for capital expenditures, $110 million of cash paid to repurchase 3.5 million of our ordinary shares, and $137 million in dividends paid to our shareholders.
We believe that our cash and cash equivalents on hand, and cash flows from operations, combined with availability under our revolving credit facility, will provide sufficient liquidity to fund our current obligations, projected working capital requirements, capital spending, quarterly dividends (if and when declared by our Board) and any share repurchases we may choose to make under our share repurchase program for at least the next 12 months. We anticipate that our capital expenditures for fiscal year 2013 may be incrementally higher than for fiscal year 2012, due primarily to increased spending on capacity expansion in our Fort Collins internal fabrication facility, as well as spending on equipment to support various research and development projects. If we do not have sufficient cash to fund our operations or finance growth opportunities, including acquisitions, or unanticipated capital expenditures, our business and financial condition could suffer. We could also reduce certain expenditures such as repurchases of our ordinary shares and payment of our quarterly dividend. In such circumstances we may seek to obtain debt or equity financing in the future. However, we cannot assure that such additional financing will be available on terms acceptable to us or at all. Our ability to service any indebtedness we may incur, including under our revolving credit facility, will depend on our ability to generate cash in the future. In addition, even though we may not need additional funds, we may still elect to sell additional debt or equity securities or increase our current credit facility for other reasons.
The following table summarizes our cash flows for the periods indicated (in millions):
 
Year Ended
 
October 28, 2012
 
October 30, 2011
 
October 31, 2010
Net cash provided by operating activities
$
693

 
$
726

 
$
510

Net cash used in investing activities
(244
)
 
(122
)
 
(86
)
Net cash used in financing activities
(194
)
 
(336
)
 
(335
)
Net increase in cash and cash equivalents
$
255

 
$
268

 
$
89

Cash Flows for the Years Ended October 28, 2012 and October 30, 2011
Operating Activities
Net cash provided by operating activities during the year ended October 28, 2012 was $693 million. The net cash provided by operating activities was principally due to net income of $563 million and non-cash charges of $217 million, offset by changes in operating assets and liabilities of $87 million.

47

Table of Contents

Accounts receivable increased to $341 million at the end of fiscal year 2012 from $328 million at the end of fiscal year 2011. Accounts receivable days sales outstanding increased to 51 days at October 28, 2012 from 48 days at October 30, 2011 primarily due to linearity of shipments in the last three months of fiscal year 2012 as compared to the last three months of fiscal year 2011. We use the current quarter revenue in our calculation of number of days sales outstanding.
Inventory was $194 million at both October 28, 2012 and October 30, 2011. Inventory days on hand remained flat at 58 days as of both October 28, 2012 and October 30, 2011. We use the current quarter cost of products sold in our calculation of days on hand of inventory.
Other current assets increased to $72 million at October 28, 2012 from $42 million at the end of fiscal year 2011 primarily due to a $16 million increase in cash advances made to certain of our existing distributors for anticipated distributor price adjustments, a $5 million increase in receivables from our contract manufacturers for materials purchased by us on their behalf to secure pricing, a $5 million increase in receivables from intellectual property-related revenue, a $3 million increase in receivables from government grants, a $3 million increase in assets related to the employee deferred compensation plan and a $1 million increase in deposits paid for fixed assets, partially offset by a $4 million decrease in current deferred taxes, net of valuation allowances. During the second quarter of fiscal year 2012, we entered into agreements with certain distributors whereby we agreed to advance cash to them to fund estimated price adjustments. These advances are estimated based on an agreed percentage of the rolling previous three months average ending inventory, as reported by the distributor, multiplied by the rolling previous three months price adjustment credits as a percentage of the distributor's reported rolling previous three months resales. The terms of these advances are set forth in binding legal agreements and are unsecured, bear no interest on unsettled balances, and are due upon demand. The agreements governing these advances can be cancelled by us at any time. Such advances have no impact on revenue recognition or our consolidated statements of operations and are recorded in other current assets on our consolidated balance sheets. 
Current liabilities decreased to $346 million at the end of fiscal year 2012 from $350 million at the end of fiscal year 2011 mainly due to a decrease in employee compensation and benefits accruals and other current liabilities, partially offset by an increase in accounts payable. Employee compensation and benefits decreased to $61 million at the end of fiscal year 2012 from $89 million at the end of fiscal year 2011 mainly due to performance levels under our employee bonus program related to our overall profitability and other performance metrics. Other current liabilities decreased to $36 million at the end of fiscal year 2012 from $38 million at the end of fiscal year 2011 primarily due to a $3 million release from and $1 million utilization of warranty accruals, a $2 million decrease in supplier inventory liabilities and $2 million recognition of previously deferred revenue, offset by a $6 million increase in income tax and sales and use tax payables. Accounts payable increased to $248 million as at October 28, 2012 from $221 million at the end of fiscal year 2011 due to timing of disbursements and a higher volume of purchases to support the increase in revenue over the year.
Other long-term assets increased to $66 million at the end of fiscal year 2012 from $61 million at the end of fiscal year 2011 mainly due to the increase in long-term deferred tax assets. Other long-term liabilities increased to $95 million at the end of fiscal year 2012 from $86 million at the end of fiscal year 2011 mainly due to the change in actuarial assumptions used in the valuation of our post-retirement benefit and defined benefit pension plans liabilities and the net periodic pension expenses recorded during the year for our post-retirement benefit and defined benefit pension plans.
Net cash provided by operating activities during the year ended October 30, 2011 was $726 million. The net cash provided by operating activities was principally due to net income of $552 million and non-cash charges of $209 million, offset by changes in operating assets and liabilities of $35 million.
Investing Activities
Net cash used in investing activities for the year ended October 28, 2012 was $244 million. The net cash used in investing activities principally related to purchases of property, plant and equipment of $241 million, in connection with the expansion of our internal manufacturing facilities in Fort Collins, Colorado and $4 million related to immaterial business acquisitions completed in fiscal year 2012.
Net cash used in investing activities for the year ended October 30, 2011 was $122 million. The net cash used in investing activities principally related to purchases of property, plant and equipment of $112 million and $8 million related to a business acquisition completed in fiscal year 2011.
Financing Activities
Net cash used in financing activities for the year ended October 28, 2012 was $194 million. The net cash used in financing activities was principally due to an aggregate of $137 million in payments of cash dividends to shareholders and the payment of an aggregate of $110 million to repurchase and cancel 3.5 million shares of our ordinary shares under our share repurchase program. This was partially offset by $44 million in net proceeds provided by the exercises of options, and purchases of our ordinary shares by employees under our ESPP.

48

Table of Contents

Net cash used in financing activities for the year ended October 30, 2011 was $336 million. The net cash used in financing activities was principally due to the redemption of the remaining $230 million in principal amount of senior subordinated notes, an aggregate of $86 million in payments of cash dividends to shareholders and the payment of an aggregate of $93 million to repurchase and cancel 2.6 million shares of our ordinary shares under our share repurchase program. This was partially offset by $70 million in net proceeds provided by the exercises of options and purchases of our ordinary shares by employees under our ESPP.
Cash Flows for the Years Ended October 30, 2011 and October 31, 2010
Operating Activities
Net cash provided by operating activities during the year ended October 30, 2011 was $726 million. The net cash provided by operating activities was principally due to net income of $552 million and non-cash charges of $209 million, offset by changes in operating assets and liabilities of $35 million.
Accounts receivable increased to $328 million at the end of fiscal year 2011 from $285 million at the end of fiscal year 2010. Accounts receivable days sales outstanding increased to 48 days at October 30, 2011 from 45 days at October 31, 2010 primarily due to linearity of shipments in the last three months of fiscal year 2011 as compared to the last three months of fiscal year 2010. We use the current quarter revenue in our calculation of number of days sales outstanding.
Inventory increased to $194 million at October 30, 2011 from $189 million at October 31, 2010. The increase in inventory dollar amount is attributable to anticipated increased demand. Inventory days on hand decreased slightly from 61 days at October 31, 2010 to 58 days at October 30, 2011. We use the current quarter cost of products sold in our calculation of days on hand of inventory.
Current liabilities decreased to $350 million at the end of fiscal year 2011 from $565 million at the end of fiscal year 2010 mainly due to the redemption in December 2010 of $230 million of long-term debt that was classified as current at October 31, 2010 (as it had been irrevocably called for redemption before the fiscal year end) and decreases in accrued interest and other current liabilities, offset by increases in accounts payable and employee compensation and benefits accruals. Accrued interest decreased to less than $1 million at October 30, 2011 from $12 million at the end of fiscal year 2010 mainly due to the debt redemption and semi-annual interest payments made during fiscal year 2011. Other current liabilities decreased to $38 million at the end of fiscal year 2011 from $41 million at the end of fiscal year 2010 primarily due to an $11 million decrease in accrued warranty related to settlement payments and reassessment of replacement parts exposure, partially offset by a $4 million increase in current income tax payable and a $3 million increase in deferred revenue. Accounts payable increased to $221 million as at October 30, 2011 from $198 million at the end of fiscal year 2010 due to timing of disbursements and higher volume of purchases to support the increase in revenue over the year. Employee compensation and benefits increased to $89 million at the end of fiscal year 2011 from $82 million at the end of fiscal year 2010 mainly due to salary increases and our employee bonus program related to our overall profitability.
Other long-term assets increased to $61 million at the end of fiscal year 2011 from $44 million at the end of fiscal year 2010 mainly due to the increase in long-term deferred tax assets. Other long-term liabilities increased to $86 million at the end of fiscal year 2011 from $83 million at the end of fiscal year 2010 mainly due to the change in actuarial assumptions used in the valuation of our U.S. post-retirement benefit plan liabilities and the net periodic pension expenses recorded during the year for our U.S. post-retirement benefit plan.
Net cash provided by operating activities during the year ended October 31, 2010 was $510 million. The net cash provided by operating activities was principally due to net income of $415 million and non-cash charges of $194 million, offset by changes in operating assets and liabilities of $99 million.
Investing Activities
Net cash used in investing activities for the year ended October 30, 2011 was $122 million. The net cash used in investing activities principally related to purchases of property, plant and equipment of $112 million, in connection with the expansion of our internal manufacturing facilities in Fort Collins, Colorado, and in Singapore and $8 million related to a business acquisition completed in fiscal year 2011.
Net cash used in investing activities for the year ended October 31, 2010 was $86 million. The net cash used in investing activities principally related to purchases of property, plant and equipment of $79 million and acquisitions and investments of $9 million.

49

Table of Contents

Financing Activities
Net cash used in financing activities for the year ended October 30, 2011 was $336 million. The net cash used in financing activities was principally due to the redemption of the remaining $230 million in principal amount of our senior subordinated notes, an aggregate of $86 million in payments of cash dividends to shareholders and the payment of an aggregate of $93 million to repurchase and cancel 2.6 million shares of our ordinary shares under our share repurchase program. This was partially offset by $70 million in net proceeds provided by the exercises of options and purchases of our ordinary shares by employees under our ESPP.
Net cash used in financing activities for the year ended October 31, 2010 was $335 million, comprised mainly of the redemption of $318 million in principal amount of senior fixed rate notes and $46 million principal amount of senior floating rate notes, offset by $28 million provided by the issuance of ordinary shares, upon the exercise of options.
Indebtedness

As of October 28, 2012, we had $3 million of capital lease obligations. At such date, we also had $300 million of borrowing capacity available under our revolving credit facility.
Revolving Credit Facility
Our current credit agreement provides for a $200 million senior unsecured revolving credit facility with a term of four years, ending on March 31, 2015. The revolving credit facility is available for cash borrowings and for the issuance of letters of credit up to a sub-limit of $40 million. The credit agreement contains financial covenants requiring Avago Finance to maintain a maximum leverage ratio and a minimum interest coverage ratio and customary restrictive covenants, including certain restrictions on the ability of our subsidiaries (including Avago Finance) to pay dividends, and customary events of default. In addition, the credit agreement permits Avago Finance to increase the aggregate commitments under the credit agreement from $200 million to $300 million, at any time, subject to certain conditions and the receipt of sufficient commitments for such increase from the lenders. Compliance with financial covenants is required for the term of the credit agreement irrespective of the amount of borrowing outstanding. On August 6, 2012, Avago Finance exercised the accordion feature under its credit agreement to increase the aggregate commitments for its unsecured revolving credit facility from $200 million to $300 million. This increase in the revolving credit facility commitment result in a corresponding increase in commitment fees payable under the credit agreement. Certain subsidiaries of the Company guarantee the revolving credit facility.

Borrowings under our senior unsecured revolving credit facility are subject to floating rates of interest and will bear interest at a rate per annum equal to:

Base Rate Advances: the highest of (x) Citibank's publicly announced base rate from time to time, (y) the U.S. Federal funds rate plus 0.5% and (z) the British Bankers Association Interest Settlement Rate, or BBA LIBOR Rate applicable to Dollars for a period of one month plus 1.00%; or

Eurocurrency Advancesthe rate per annum obtained by dividing (x) the BBA LIBOR Rate for deposits in Dollars for the applicable interest period by (y) a percentage equal to 100% minus the Eurocurrency liabilities reserve percentage specified by the U.S. Federal Reserve System for such interest period, 

plus, in each case, a margin based on the credit rating of Avago Finance's long-term unsecured debt or Avago Finance's corporate credit rating, as applicable, or the Avago Public Debt Rating. Avago Finance is also required to pay the lenders a commitment fee at a rate per annum that varies based on the Public Debt Rating and the aggregate amount of the outstanding commitments under the credit agreement.
As of October 28, 2012, we had no borrowings outstanding under the revolving credit facility and were in compliance with the financial covenants under our credit agreement. We did not draw on our revolving credit facility during fiscal year 2012.
Contractual Commitments
Our cash flows from operations are dependent on a number of factors, including fluctuations in our operating results, accounts receivable collections, inventory management, and timing of payments. As a result, the impact of contractual obligations on our liquidity and capital resources in future periods should be analyzed in conjunction with such factors.

50

Table of Contents

The following table sets forth our contractual obligations and commitments as of October 28, 2012 for the fiscal periods noted (in millions):
 
Total
 
2013
 
2014 to
2015
 
2016 to
2017
 
Thereafter
Operating leases(1)
$
97

 
$
10

 
$
20

 
$
9

 
$
58

Capital leases(2)
3

 
1

 
2

 

 

Purchase Commitments (3)
121

 
121

 

 

 

Revolving credit facility commitments(4)
3

 
1

 
2

 

 

Other Contractual Commitments(5)
53

 
21

 
20

 
12

 

_______________________________________
(1)
Includes operating lease commitments for facilities and equipment that we have entered into with third parties.
(2)
Includes capital lease commitments for equipment that we have entered into with third parties.
(3)
We purchase components from a variety of suppliers and use several contract manufacturers to provide manufacturing services for our products. During the normal course of business, we issue purchase orders with estimates of our requirements several months ahead of the delivery dates. However, our agreements with these suppliers usually allow us the option to cancel, reschedule, and adjust our requirements based on our business needs prior to firm orders being placed. Typically purchase orders outstanding with delivery dates within 30 days are non-cancelable.
We also make purchases from a variety of vendors in connection with the expansion of our Fort Collins internal fabrication facility. These purchases are typically conducted on a purchase order basis and the amount shown in the table includes $33 million in cancelable and non-cancelable outstanding purchase obligations under such purchase orders as of October 28, 2012.
In addition to the above non-cancelable purchase commitments, we record a liability for firm, non-cancelable, and unconditional purchase commitments for quantities in excess of our future demand forecasts in conjunction with our write-down of inventory. As of October 28, 2012, the liability for our firm, non-cancelable and unconditional purchase commitments related to inventory suppliers was $2 million. This amount is included in other current liabilities in our balance sheets at October 28, 2012, and are excluded from the preceding table.
(4)
Represents commitment fees and letter of credit fees.
(5)
Represents amounts payable pursuant to agreements related to outsourced IT, human resources, financial infrastructure outsourcing services and other services agreements.
Due to the inherent uncertainty with respect to the timing of future cash outflows associated with our unrecognized tax benefits at October 28, 2012, we are unable to reliably estimate the timing of cash settlement with the respective taxing authority. Therefore, $22 million of unrecognized tax benefits classified as long-term income tax payable in the consolidated balance sheet as of October 28, 2012 have been excluded from the contractual obligations table above.
Off-Balance Sheet Arrangements
We had no material off-balance sheet arrangements at October 28, 2012 as defined in Item 303(a)(4)(ii) of SEC Regulation S-K.
Indemnifications to Hewlett-Packard and Agilent
Agilent Technologies, Inc. has given multiple indemnities to Hewlett-Packard Company in connection with its activities prior to its spin-off from Hewlett-Packard Company in June 1999 for the businesses that constituted Agilent prior to the spin-off. As the successor to the SPG business of Agilent, we may acquire responsibility for indemnifications related to assigned intellectual property agreements. Additionally, when we completed the SPG Acquisition in December 2005, we provided indemnities to Agilent with regard to Agilent’s conduct of the SPG business prior to the SPG Acquisition. In our opinion, the fair value of these indemnifications is not material and no amount has been accrued in the accompanying consolidated financial statements with respect to these indemnification obligations.
Other Indemnifications
As is customary in our industry and as provided for in local law in the United States and other jurisdictions, many of our standard contracts provide remedies to our customers and others with whom we enter into contracts, such as defense, settlement, or payment of judgment for intellectual property claims related to the use of our products. From time to time, we indemnify customers, as well as our suppliers, contractors, lessors, lessees, companies that purchase our businesses or assets

51

Table of Contents

and others with whom we enter into contracts, against combinations of loss, expense, or liability arising from various triggering events related to the sale and the use of our products, the use of their goods and services, the use of facilities and state of our owned facilities, the state of the assets and businesses that we sell and other matters covered by such contracts, usually up to a specified maximum amount. In addition, from time to time we also provide protection to these parties against claims related to undiscovered liabilities, additional product liability or environmental obligations. In our experience, claims made under such indemnifications are rare and the associated estimated fair value of the liability is not material.
Accounting Changes and Recent Accounting Standards
For a description of accounting changes and recent accounting standards, including the expected dates of adoption and estimated effects, if any, on our consolidated financial statements, see Note 2. “Summary of Significant Accounting Policies” to Consolidated Financial Statements of this Annual Report on Form 10-K.
ITEM 7A.
QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
Foreign Currency Derivative Instruments
Although a majority of our revenue and operating expenses is denominated in U.S. dollars, and we prepare our financial statements in U.S. dollars in accordance with GAAP, a portion of our revenue and operating expenses is in foreign currencies. Our revenues, costs and expenses and monetary assets and liabilities are exposed to changes in currency exchange rates as a result of our global operating and financing activities. To mitigate the exposures resulting from the changes in the exchange rates of these currencies, we enter into foreign exchange forward contracts to hedge a portion of these exposures. Contracts that meet accounting criteria are designated at inception as hedges of the related foreign currency exposures, which include committed and anticipated transactions that are denominated in currencies other than the U.S. dollar. The criteria for designating a derivative as a hedge include the assessment of the instrument’s effectiveness in risk reduction, matching of the derivative instrument to its underlying transaction, and the assessment of the probability that the underlying transaction will occur. Our foreign exchange forward contracts generally mature within three to six months. We do not use derivative financial instruments for speculative or trading purposes. As of October 28, 2012, there were no foreign exchange forward contracts outstanding. Losses from foreign currency transactions, as well as derivative instruments, are included in our consolidated statements of operations in the amounts of $0 million, $0 million and $4 million for the years ended October 28, 2012, October 30, 2011 and October 31, 2010.
Interest Rate Risk
Borrowings under our revolving credit facility are subject to floating rates of interest. Any significant changes in interest rates would increase our borrowing costs under our credit facility. However, a hypothetical increase of 100 basis points in short-term interest rates would not have a material impact on our revolving credit facility. We did not have any borrowings outstanding under this facility during fiscal year 2012 or as at October 28, 2012.
European Debt Exposures
We actively monitor our exposure to the European financial markets, including the impact of sovereign debt issues. We also mitigate our risk by investing in fixed deposits with various financial institutions and we limit the amount we hold with any one institution. We do not have any direct investments in the sovereign debt of European countries. From time to time, we may have deposits with major European financial institutions. We also mitigate collection risks from our customers by performing regular credit evaluations of our customers' financial conditions and require collateral, such as letters of credit and bank guarantees, in certain circumstances. As of October 28, 2012, we do not believe that we have any material direct or indirect exposure to the European financial markets.

52

Table of Contents

ITEM 8.
FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

AVAGO TECHNOLOGIES LIMITED
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

 
Page