10-K
Table of Contents

 
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
__________________________________________________________ 
FORM 10-K
__________________________________________________________
x
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended December 31, 2015
or
¨
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from                      to                     
Commission File No. 001-35938
__________________________________________________________
GLOBAL BRASS AND COPPER HOLDINGS, INC.
(Exact name of registrant as specified in its charter)
__________________________________________________________ 
Delaware
 
06-1826563
(State or other jurisdiction of
incorporation or organization)
 
(I.R.S. Employer
Identification Number)
 
 
475 N. Martingale Road Suite 1050
Schaumburg, IL
 
60173
(Address of principal executive offices)
 
(Zip Code)
(847) 240-4700
(Registrant’s telephone number, including area code)
__________________________________________________________ 
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ¨    No  ý
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes  ¨    No  ý
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  ý    No  ¨
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  ý    No  ¨
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  ¨
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.
Large accelerated filer
¨
Accelerated filer
x
 
 
 
 
Non-accelerated filer
¨  (Do not check if a smaller reporting company)
Smaller reporting company
¨
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ¨    No  ý
The aggregate market value of the registrant’s common stock held by non-affiliates of the registrant on June 30, 2015, the last business day of the registrant’s most recently completed second fiscal quarter, was approximately $358.3 million (based upon the closing price per share of the registrant’s common stock on the New York Stock Exchange on that date).
On February 24, 2016, there were 21,489,645 shares of common stock outstanding.
DOCUMENTS INCORPORATED BY REFERENCE
Portions of the Registrant’s definitive Proxy Statement, which will be filed with the Securities and Exchange Commission within 120 days after December 31, 2015, are incorporated by reference in Part III of this Form 10-K.
 




Table of Contents
  
Item 1.
Item 1A.
Item 1B.
Item 2.
Item 3.
Item 4.
 
 
 
Item 5.
Item 6.
Item 7.
Item 7A.
Item 8.
Item 9.
Item 9A.
Item 9B.
 
 
 
Item 10.
Item 11.
Item 12.
Item 13.
Item 14.
 
 
 
Item 15.


i

Table of Contents

PART I
Item 1. Business.
Our Company
Global Brass and Copper Holdings, Inc. (“Holdings,” the “Company,” “we,” “us,” or “our”) was incorporated in Delaware on October 10, 2007. Holdings, through its wholly-owned principal operating subsidiary, Global Brass and Copper, Inc. (“GBC”), commenced commercial operations on November 19, 2007 following the acquisition of the worldwide metals business from Olin Corporation. The majority of our operations are managed through three reportable operating segments: Olin Brass, Chase Brass and A.J. Oster. We also have a Corporate entity which includes certain administrative costs and expenses and the elimination of intercompany balances. Our sales activities are primarily focused in North America under the Olin Brass, Chase Brass and A.J. Oster brand names.
We are a leading, value-added converter, fabricator, processor and distributor of specialized non-ferrous products, including a wide range of sheet, strip, foil, rod, tube and fabricated metal component products. While we primarily process copper and copper-alloys, we also reroll and form certain other metals such as stainless steel, carbon steel and aluminum. Using processed scrap, virgin metals and other refined metals, we engage in metal melting and casting, rolling, drawing, extruding, welding and stamping to fabricate finished and semi-finished alloy products. Key attributes of copper and copper alloys are conductivity, corrosion resistance, strength, malleability, cosmetic appearance and bactericidal properties.
Our products are used in a variety of applications across diversified markets, including the building and housing, munitions, automotive, transportation, coinage, electronics / electrical components, industrial machinery and equipment and general consumer markets. We access these markets through direct mill sales, our captive distribution network and third-party distributors. We hold the exclusive production and distribution rights in North America for a lead-free brass rod product, which we sell under the Green Dot® and Eco Brass® brand names. The vertical integration of Olin Brass’s manufacturing capabilities and A.J. Oster’s distribution capabilities allows us to access customers with a wide variety of volume and service needs.
We service nearly 1,600 customers in 23 countries across four continents. We employ approximately 1,900 people and operate 11 manufacturing facilities and distribution centers across the United States (“U.S.”), Puerto Rico and Mexico.
We own 80% of a value-added service center in Guangzhou, China (“Olin Luotong Metals” or “OLM”); the other 20% is owned by Chinalco Luoyang Copper Co. Ltd. (“Chinalco”). Through Olin Luotong Metals, together with our sales offices in China and Singapore, we supply our products in China and throughout Asia.
Unlike traditional metals companies, in particular those that engage in mining, smelting and refining activities, we are purely a metal converter, fabricator, processor and distributor, and we do not attempt to generate profits from fluctuations in metal prices. Our financial performance is primarily driven by metal conversion economics, not by the underlying movements in the price of copper and the other metals we use. Through our “balanced book” approach (as further described under “Management’s Discussion and Analysis of Financial Condition and Results of Operations—Key Factors Affecting Our Results of Operations—Balanced Book”), we strive to match the timing, quantity and price of our metal sales with the timing, quantity and price of our replacement metal purchases. This practice substantially reduces the financial impact of metal price movements on our earnings and operating margins.

1

Table of Contents

The following charts show the percentage of the Company’s shipments by segment, as well as the primary markets for our products and the percentage of shipments in 2015. Pounds shipped by market represent management’s estimate of the markets in which our customers participate. Additionally, pounds shipped by market reflect management’s allocation of Chase Brass shipments to distributors, job shops and forging shops. See Item 1, “Business—Chase Brass.” All of our segments sell to the building and housing market. While demand within this market is affected by new residential housing, existing home sales and commercial construction, all of which are seasonal and dependent on overall economic conditions, the correlation between housing statistics and our sales is not entirely direct. Our key products are typically installed near the completion of construction, meaning there is an inherent lag time compared to housing starts, and sales of our building and housing products can be affected by factors such as housing mix (unit size, unit price point and the mix of multi-family versus single-family construction). Sales of our products can also be impacted by changes in the composition of materials and fixtures used in construction as well as import and export dynamics.


2

Table of Contents

Segments Overview
We have three reportable operating segments: Olin Brass, Chase Brass and A.J. Oster.
 
Description
 Leading manufacturer, fabricator and converter of specialized copper and brass sheet, strip, foil, tube, and fabricated products
 Leading manufacturer and supplier of brass rod
 Leading processor and distributor of copper and brass products
Key Markets
 Building and Housing
 Building and Housing
 Building and Housing
 
 Automotive
 Transportation
 Automotive
 
 Electronics / Electrical Components
 Electronics / Electrical Components
 Electronics / Electrical Components
 
Munitions
 Industrial Machinery and Equipment
 
 
Coinage
 
 

Further information about our business segments and the geographic areas of our operations can be found in “Note 4, Segment Information.”
Olin Brass
In addition to manufacturing, fabricating and converting specialized copper and brass sheet, strip, foil, tube and fabricated products, the Olin Brass segment also rerolls and forms other alloys such as stainless steel, carbon steel and aluminum. Sheet and strip is generally manufactured from copper and copper-alloy scrap.
Olin Brass manufactures its wide variety of products through four sites in North America. It is not uncommon for Olin Brass to produce 50 different alloys, approximately 30% of which could be high performance alloys (“HPAs”).
Olin Brass’s integrated brass mill in East Alton, Illinois is its main operating facility, which produces strip products that are either sold directly to external customers, sold to its affiliate, A.J. Oster, or shipped to Olin Brass’s downstream operations for further value-added processing. Olin Brass’s downstream operations include:

a stamping operation located in East Alton;
a rolling mill in Waterbury, Connecticut with rolling, annealing, leveling, plating and slitting capabilities for various products (“Somers Thin Strip”);
a manufacturing facility in Bryan, Ohio specializing in products sold in the automotive and electronics / electrical components markets; and
a manufacturing facility in Cuba, Missouri that produces high frequency welded copper-alloy tube for heat transfer, utility, decorative, automotive and plumbing applications.

Olin Brass’s products are sold to original equipment manufacturers (“OEMs”), other external customers, distributors / rerollers or to its affiliate, A.J. Oster. In 2015, approximately 18% of Olin Brass’s products were shipped to supply chain customers, which includes its affiliate A.J. Oster, of which management estimates that approximately 57% were directly associated with the building and housing and automotive sectors. In 2015, Olin Brass sold approximately 16% of its domestic copper-based products to A.J. Oster.

3

Table of Contents

The following chart shows the primary markets for Olin Brass’s products and the percentage of shipments in 2015.

(1)
Approximately 57% of supply chain customer shipments are directly associated with the building and housing and automotive markets according to management estimates. Shipments to A.J. Oster are reflected in the supply chain market and are eliminated in consolidation.
Munitions Market
Olin Brass manufactures products utilized in both the military and commercial munitions markets, such as strip and cups, that are used to produce shot shells, bullet jackets, centerfire, rimfire and small caliber military munitions.
Customers in this market include major munitions producers in the U.S., as well as government facilities producing small caliber ammunition. Demand within this market is affected by the U.S. government’s security policies, as well as consumer demand for firearms and munitions. While munitions demand is predominantly domestic, occasional opportunities arise to supply U.S. alliance partners with these products.
Coinage Market
Olin Brass supplies strip for use in the production of dollar coins, quarters, dimes and nickels. Customers in this market include the United States Mint, for which we are a key supplier contracted through 2017. This long-term contract has typically been renewed as Olin Brass has been a highly regarded and valued supplier to the United States Mint for over 40 years.
The demand within this market is affected by the level of activities in retail transactions, the use of vending machines, and the trends affecting forms of payment.
Automotive Market
Olin Brass manufactures both strip and fabricated products used as electronic and electrical connectors for use in automobiles. These products are made with HPAs, suitable for applications requiring high reliability, high temperature and low insertion force. For example, these electrical connectors, along with lead frames manufactured by us, are used in junction boxes, wiring harnesses, ignition systems, lighting and automotive entertainment systems.

4

Table of Contents

Customers in this market include primary automotive connector suppliers in the U.S. Historically the business in this market remained largely regional in the U.S. Demand within this market is affected by the level of consumer spending on automobiles, which is significantly dependent on overall economic conditions, and the amount of electrical components contained within automobiles.
Building and Housing Market
Olin Brass manufactures a variety of strip, welded tube and stamped parts used in commercial and residential buildings, such as faucets, locksets, decorative door hardware and hinges, which require workability, corrosion resistance and attractive appearance. Olin Brass also manufactures strip for products requiring high electrical conductivity, such as plug outlets, switches, lamp shells, other wiring devices, industrial controls, circuit breakers and switchgears. These products are generally manufactured with copper and copper-alloy sheet and strip, both HPAs and standard alloys, as well as copper-alloy welded tube.
Customers in this market are OEMs producing building and housing products. These products are supplied either directly to customers or to A.J. Oster. Olin Brass also supplies building and housing products in China through Olin Luotong Metals.
Electronics / Electrical Components Market
Olin Brass manufactures strip used in integrated circuit sockets for circuit boards, electrical connectors for laptop computers, consumer electronics and appliances, and foils for flexible circuit applications. The strip manufactured in this market is high in HPA content and is sold directly to end-use customers and distributors.
Customers in this market are primarily electronics manufacturers that operate globally. A portion of these customers is serviced through A.J. Oster, and the remainder is supplied directly by Olin Brass, with its Somers Thin Strip facility providing the foil products on a global scale.
Demand within this market is affected by consumer spending on electronics, which may fluctuate significantly as a result of economic conditions.
International

The Olin Brass segment sold 24.3 million pounds into non-U.S. markets that primarily serve the building and housing, automotive and electronics / electrical components markets.
Asia
Olin Brass’s operations in Asia primarily consist of Olin Luotong Metals and GBC Metals Asia Pacific PTE (“GMAP”), a 100% owned subsidiary in Singapore. In 2015, Olin Brass sold 9.3 million pounds (4% of the Olin Brass segment’s sales) of product into Asia through OLM and GMAP.
Established in 2002, OLM is a service center that distributes HPAs that are manufactured by Olin Brass in the U.S., into the Chinese market and also distributes other standard alloys that are manufactured by Chinalco. OLM performs value-added slitting and winding operations to these alloys prior to distribution. Almost all of OLM’s sales are settled in U.S. dollars. During 2015, OLM generated $31.2 million of net sales, or 4% of the Olin Brass segment’s net sales. On a pounds sold basis, OLM comprised 3% of the Olin Brass segment’s sales in 2015.
GMAP markets and sells HPAs supplied primarily by Olin Brass into key electronics markets in Asia, including Singapore, Malaysia, South Korea, Taiwan and China. GMAP also sources product from DOWA Metaltech Co. Ltd. (“Dowa Metaltech”), a Japanese company with which Olin Brass previously had a joint venture relationship. During 2015, GMAP generated $10.0 million of net sales, or 1% of the Olin Brass segment’s net sales. On a pounds sold basis, GMAP comprised less than 1% of the Olin Brass segment’s sales in 2015.
Others
The remainder of Olin Brass’s international sales are primarily to Mexico, Canada and European countries and were 15.0 million pounds (6% of the Olin Brass segment’s sales) in 2015.

5

Table of Contents

Chase Brass
Chase Brass primarily manufactures brass rod, including round, hexagonal and other shapes, ranging from 1/4 inch to 4.5 inches in diameter. Its customers machine or otherwise process the rod for various applications used in various markets. Brass rod is primarily used for forging and machining products, such as valves and fittings. Key attributes of brass rod include its machinability, corrosion resistance and moderate strength. Brass rod is generally manufactured from copper or copper-alloy scrap and all of Chase Brass’s rod is manufactured at its Montpelier, Ohio facility.
Chase Brass has been able to capitalize on opportunities arising from regulation limiting lead content in potable water plumbing fixtures. We believe this legislation will continue to increase the need for Chase’s green products, comprised of our low-lead and lead-free materials, including Eco Brass®. The green product portfolio has grown significantly over the past few years.
The following chart shows the primary markets for Chase Brass’s products and the percentage of shipments for each during 2015. Note that substantially all of the electronics / electrical components shipments below are associated with the building and housing and transportation markets.
 
Building and Housing Market
Chase Brass manufactures brass rod for use in faucets, valves and fittings used in residential and commercial construction.
Chase Brass produces a number of low-lead and lead-free products, or “green portfolio” products, which comply with state laws in California and Vermont as well as Federal standards (patterned after legislation enacted in California and Vermont) that became effective in January 2014. This legislation defines the allowed level of lead content in products used in plumbing and drinking water applications. Chase Brass’s Green Dot® rod, Eco Brass® rod and Eco Brass® ingot products are part of the green portfolio, and Chase Brass is the exclusive licensee of the intellectual property rights for their production, sale and distribution in North America. Chase Brass also manufactures other non-patented green portfolio products. Green portfolio products accounted for approximately 19% of pounds shipped by Chase Brass in 2015.
Industrial Machinery and Equipment Market
Chase Brass manufactures brass rod used in industrial valves and fittings. Demand within this market is affected by capital spending levels, U.S. gross domestic product (“GDP”) growth and industrial production growth in the U.S.

6

Table of Contents

Customers in this market include various major diversified manufacturers and a variety of screw machine companies supporting OEMs.
Transportation Market
Chase Brass manufactures brass rod for uses in heavy trucks and automobiles. Specific applications include heavy truck braking systems, tire valves, temperature sensors and various truck and automotive fittings. Demand within this market is affected by levels of transportation activity, levels of maintenance capital spending by transportation companies and the level of commercial truck fleet replacement activity, all of which are affected significantly by overall economic conditions. Customers in this market include major OEMs in the transport industry and customers who support domestic automotive production.
Electronics / Electrical Components Market
Chase Brass manufactures brass rod used for telecommunication applications, including products such as coaxial connectors and traps and filters for cable television, as well as larger connectors supporting the cell tower industry. Demand within this market is affected by consumer spending, new home construction, and technologies affecting communication devices and methods. Customers within this market include major manufacturers of specialty products for use in home and commercial construction, both of which are very dependent on overall economic conditions. Management believes that substantially all of the shipments in this market segment are directly associated with the building and housing market and transportation markets.
International
Chase Brass primarily supplies products within North America. Chase Brass generated $43.8 million in net sales (8% of the Chase Brass segment’s net sales) to Canada and Mexico in 2015. Sales to Canada and Mexico were 22.3 million pounds (10% of the Chase Brass segment’s sales) in 2015.
A.J. Oster
A.J. Oster is a processor and distributor of primarily copper and copper-alloy sheet, strip and foil, operating six strategically-located service centers in the U.S., Puerto Rico and Mexico. Key A.J. Oster competitive advantages are short lead-times with high reliability, high level of service, small-quantity deliveries and a wide range of high-quality, copper-based products. These capabilities, combined with A.J. Oster’s operations of precision slitting, hot tinning, traverse winding, cutting, edging, stamping and special packaging, provide value to a broad customer base.
In 2015, Olin Brass provided A.J. Oster with 55% of its copper-based products. Aurubis AG (“Aurubis”) is A.J. Oster’s second largest supplier after Olin Brass, supplying approximately 28% of A.J. Oster’s copper-based products in 2015. Many of the coils purchased from Olin Brass and Aurubis are full-width and require slitting.


7

Table of Contents

The following chart shows the primary markets for A.J. Oster’s products and the percentage of shipments for each during 2015.
 
 
Building and Housing Market
A.J. Oster distributes copper-alloy strip and aluminum foil used for products in commercial and residential buildings. The two primary applications are electrical and hardware.
Electrical products are primarily for wiring devices. Other applications include switchgears, switches, controls and circuit breakers. Several of our customers for these products are in Puerto Rico or Mexico. A.J. Oster’s capabilities are well-suited for these geographic locations and the stringent service requirements of the electrical market because A.J. Oster is able to provide customers with high-quality metals, in less-than-truckload quantities, and can deliver products shortly after receiving orders.
Hardware products include products such as faucets, window trim, locksets, hinges and kick plates.
Automotive Market
A.J. Oster distributes copper-alloy strip and aluminum foil used in automobile production. Primary customer products are electrical connectors, automotive trim and heat exchangers.
A.J. Oster’s subsidiary in Queretaro, Mexico is well-positioned to take advantage of the growing number of second-tier automobile component suppliers in Mexico.
Demand within this market is affected by the level of consumer spending on automobiles, which is significantly dependent on overall economic conditions.
Electronics / Electrical Components Market
A.J. Oster distributes copper-alloy strip used for electrical connectors in computers, consumer electronics and automobiles.
The demand within this market is affected by consumer spending on electronics, which may fluctuate significantly as a result of economic conditions.

8

Table of Contents

International
A.J. Oster operates a service center in central Mexico. The facility is located in Queretaro in the center of Mexico’s industrial triangle marked by Mexico City, Monterey and Guadalajara and is easily accessible by highway connections to the U.S.
Automotive sub-suppliers that consume copper-alloy strip are now locating facilities in central Mexico in order to support primary automotive manufacturing.
Net sales from A.J. Oster Mexico were $43.6 million during 2015 (15% of A.J. Oster segment’s net sales). Pounds shipped from A.J. Oster Mexico were 10.6 million and comprised 15% of the A.J. Oster segment’s sales.
Raw Materials and Supply
We manufacture our products from scrap metal (both internally generated and externally sourced) or virgin raw materials. During 2015, 86% of our metal came from scrap metal, and the remainder came from virgin raw materials.
Virgin raw materials, including copper cathode, are purchased at a premium on the London Metal Exchange (“LME”) or Commodities Exchange (“COMEX”) or directly from key dealers that support producers around the world. Although virgin raw materials are more expensive compared to scrap, we use them to produce HPAs and other products that require exact specifications.
Customers
Our customer base is broadly diversified, spanning various North American markets, including building and housing, munitions, automotive, transportation, coinage, electronics / electrical components, industrial machinery and equipment and general consumer markets. In 2015, we sold approximately 15,000 different stock keeping units (“SKUs”) to nearly 1,600 customers.
Also in 2015, net sales from our foreign entities were $84.7 million, or 6% of our net sales. We have long-term relationships with our customers, many of which are secured through short-term contracts. Our relationships with many of our significant customers have lasted more than 30 years.
On a consolidated basis, we generated 12% of our total net sales from the U.S. Mint in 2015. Additionally, Olin Brass generated 28% of its total net sales from one customer and 11% of its total net sales from another customer. A.J. Oster generated 14% of its total net sales from one customer. Chase Brass generated 16% of its total net sales from one customer.
Competition
We compete with other companies on price, service, quality, breadth, and availability of product. We believe we have been able to compete effectively because of our high levels of service, breadth of product offering, knowledgeable and trained sales force, modern equipment, numerous locations, geographic dispersion, economies of scale, and sales volume.
The North American market for brass and copper strip and sheet and brass rod consists of a few large participants and a few smaller competitors for Olin Brass and Chase Brass. A.J. Oster’s competition consists of a number of smaller competitors. Our international competitors are based principally in Europe and Asia.
Our largest competitors in each of the markets in which we operate are the following:
 
Aurubis and PMX Industries, Inc.: manufacturers of copper and copper-alloys in the form of strip, sheet and plate (Olin Brass competitor);
ThyssenKrupp Materials NA, Copper and Brass Sales Division: processor and distributor of copper, brass, stainless and aluminum products; Wieland Metals, Inc.: re-roll mill and service center for copper and copper-alloy strip (A.J. Oster competitor); and
Mueller Industries, Inc.: manufacturer of brass rod (Chase Brass competitor).

9

Table of Contents

We use data published by independent industry associations and management estimates to determine our market share. Using this information, in 2015:
 
Olin Brass accounted for 32% of North American shipments (including shipments to A.J. Oster) of copper and brass alloys in the form of sheet, strip and plate;
A.J. Oster accounted for 34% of North American shipments of copper and brass, sheet and strip products from distribution centers and rerolling facilities; and
Chase Brass accounted for 51% of North American shipments of brass rod, not including imports.
Corporate
Our Corporate expenditures include compensation for corporate executives and officers, corporate office and administrative salaries, and professional fees for accounting, tax and legal services. Corporate also includes interest expense, state and Federal income taxes, overhead costs that management has not allocated to the operating segments, share-based compensation expense, costs related to other long-term incentive programs as well as the elimination of intercompany balances.
Government Regulation and Environmental Matters
Bactericidal Products
Through its membership in the Copper Development Association Inc. (“CDA”), Olin Brass has completed the required Federal Environmental Protection Agency (“EPA”) and applicable state registration processes that allow it to market its CuVerro® products with certain approved bactericidal claims. Laboratory testing has shown that bactericidal copper touch surfaces made with CuVerro® kill more than 99.9% of bacteria within two hours. We believe that Olin Brass’s copper-based CuVerro® materials are in compliance, in all material respects, with EPA standards for products recognized by the EPA as having bactericidal properties.
In connection with these EPA registrations, the CDA is required to implement a “stewardship” plan that is designed to ensure that bactericidal copper alloys are properly used and marketed. The stewardship requirement reflects the EPA’s concern that the improper marketing of bactericidal copper alloys could lead users to mistakenly believe that the use of these products is a simple solution to fight infections. The stewardship efforts are intended to emphasize that all marketing statements are consistent with the approved EPA product label, including the need to state clearly that the alloys are intended as a supplement to, but are not a substitute for, standard cleaning and sanitization procedures. These standards also apply to marketing by our customers who use CuVerro® in their products.
Even though the marketing of copper products as bactericidal started in 2008, the manufacturers of such products are still in the process of determining what specific bactericidal claims may be made in compliance with the EPA’s and Federal Insecticide, Fungicide and Rodenticide Act’s (“FIFRA”) requirements. Therefore, there remains some uncertainty when determining whether a particular marketing approach is consistent with the EPA registration requirements. Accordingly, it is possible that we or other manufacturers may be found to be non-compliant by the EPA for current, past or future marketing claims and activities, despite efforts to comply. The EPA can impose administrative or judicial sanctions and penalties against those violating federal registrations, including corrective disclosures, civil administrative penalties, stop sale orders, cancellations of regulations, seizures, injunctions and criminal sanctions. Any failure by us or our customers who use CuVerro® in their products to comply with FIFRA’s requirements with respect to CuVerro® could therefore expose us to various enforcement actions or other claims or adverse impacts to our reputation. The stewardship program required under the EPA registration is an industry-wide activity, and the actions of other CDA members could jeopardize the marketing of all bactericidal copper products registered through the CDA (including CuVerro®). If the EPA were to determine that the stewardship program is not being implemented effectively, the EPA may initiate a variety of corrective actions, which could adversely affect us and other CDA members, including cancelling all CDA registrations. If the EPA were to initiate an enforcement action that affects us or our customers, it may have a material adverse effect on our ability to market CuVerro® as a bactericidal product.
Lead-free and Low-lead Plumbing Products
New regulations designed to reduce lead content in drinking water plumbing devices provide an opportunity for future growth. Chase Brass is a premier provider of specialized lead-free products and low-lead alloys. Federal legislation in the United States (the Reduction of Lead in Drinking Water Act, which was patterned after legislation enacted in California and Vermont) required the reduction of lead content in all drinking water plumbing devices beginning in January 2014. This legislation presents a significant growth opportunity for Chase Brass. Our Eco Brass® products meet Federal,

10

Table of Contents

California and Vermont standards and can be used to produce cast, machined and forged faucet parts. We currently supply major faucet, valve and fitting manufacturers who produce multiple products using machined Eco Brass® parts.
Environmental
Our operations are subject to a number of Federal, state and local laws and regulations relating to the protection of the environment and to workplace health and safety. In particular, our operations are subject to extensive Federal, state and local laws and regulations governing the creation, transportation, use, release and disposal of wastes, air and water emissions, the storage and handling of hazardous substances, environmental protection, remediation, workplace exposure and other matters. Hazardous materials used in our operations include general commercial lubricants, cleaning solvents and cutting oils. Among the regulated activities that occur at some of our facilities are: the accumulation of scrap metal; and the generation of hazardous waste, solid wastes and wastewaters, such as water from burning tables operated at some of our facilities. The generation, storage, and disposal of these wastes are done in accordance with the Federal Water Pollution Control Act, the Comprehensive Environmental Response, Compensation, and Liability Act (“CERCLA”) and the Resource Conservation and Recovery Act, and we use third-party commercial disposal services as permitted by these laws for the removal and disposal of these wastes. The storage, handling and use of lubricating and cutting oils and small quantities of maintenance-related products and chemicals are also regulated under environmental laws, and the health hazards of these materials are communicated to employees pursuant to the Occupational Safety and Health Act.
In general, our facilities’ operations do not involve the types of emissions of air pollutants, discharges of pollutants to land or surface water, or treatment, storage or disposal of hazardous waste which would ordinarily require Federal or state environmental permits. Some of our facilities possess authorizations under the Clean Air Act for air emissions from paints and coatings. At some locations, we also possess hazardous materials storage permits under local fire codes or ordinances for the storage of combustible materials such as oils or paints. At some facilities we possess state or local permits for on-site septic systems. Our cost of obtaining and complying with such permits has not been, and is not anticipated to be, material.
We believe that we are in substantial compliance with all applicable environmental and workplace health and safety laws and do not currently anticipate that we will be required to expend any substantial amounts in the foreseeable future in order to meet such requirements. We have a number of properties located in or near heavy industrial or light industrial use areas; accordingly, these properties may have been contaminated by pollutants which may have migrated from neighboring facilities or have been released by prior occupants for which we may become liable under various laws and regulations. Some of our properties have been affected by releases of cutting oils and similar materials and we are investigating and remediating such known contamination pursuant to applicable environmental laws. The costs of these clean-ups have not been material in the past. We are not currently subject to any material claims or notices with respect to clean-up or remediation under CERCLA or similar laws for contamination at our leased or owned properties or at any off-site location. However, we could be notified of such claims in the future. It is also possible that we could be identified by the EPA, a state agency, or one or more third parties as a potentially responsible party under federal or state laws and regulations.
Pursuant to the agreement, dated November 19, 2007, by which we purchased our current operating locations from Olin Corporation, Olin Corporation agreed to retain responsibility for a wide range of liabilities under environmental laws arising out of existing contamination on our properties, and agreed to indemnify us without limitation with respect to these liabilities. Specifically, Olin Corporation retained responsibility for:
 
compliance with all obligations to perform investigations and remedial action required under the Connecticut Real Property Transfer Act at properties in Connecticut;
pending corrective action / compliance obligations under the Federal Resource Conservation and Recovery Act for certain areas of concern at our East Alton, Illinois facility; and
all obligations under environmental laws arising out of 24 additional specifically identified areas of concern on various of our properties.
Olin Corporation also retained complete responsibility for all liabilities arising out of then pending governmental inquiries relating to environmental matters; for “any liability or obligation in connection with a facility of the Business to the extent related to pre-Closing human exposure to Hazardous Materials, including asbestos-containing materials”; and for “any liability or obligation in connection with the off-site transportation or disposal of Hazardous Materials arising out of any pre-Closing operations of the Business.”
Since 2007, Olin Corporation has continued to perform environmental remedial actions on our properties, including the East Alton, Illinois and Waterbury, Connecticut properties, and continues to work closely with us to address matters covered by the indemnity. Because of the Olin Corporation indemnity, we have not been required to engage in any

11

Table of Contents

significant environmental cleanup activity on our properties and do not currently have any material reserves established to address environmental remedial requirements.
Employees
The following table shows the composition of our workforce by operating segment and Corporate as of December 31, 2015. 
 
 
Employees
 
% of Total
Olin Brass
 
1,254

 
66
%
A.J. Oster
 
302

 
16
%
Chase Brass
 
319

 
17
%
Corporate
 
25

 
1
%
Total
 
1,900

 
100
%
As of December 31, 2015, 1,168, or approximately 61%, of our employees at various sites were members of unions. We have generally maintained good relationships with all unions and employees, which has been an important aspect of our ability to be competitive in our industry. Generally, our various agreements with unions in the United States have contractual terms which range from 1 to 5 years.
Historically, we have succeeded in negotiating new collective bargaining agreements without a strike and we have not experienced any work stoppages at any of our facilities. We believe we will continue to be able to renew the outstanding collective bargaining agreements upon acceptable terms.
Research and Development
Our staff of scientists in metallurgy and electrochemistry intends to continue to invest in research and development to develop new products and expand our value-added services to meet our customers’ needs.
Our research and development expenditures in 2015 were $1.3 million (less than 1% of total net sales).
Risk Management and Insurance
The primary risks in our operations are personal injury, property damage, transportation, criminal acts, risks associated with international operations, directors’ and officers’ liability and general commercial liabilities. We are insured against general commercial liabilities, automobile accidents (including injury to employees and physical damage of goods and property and employer liabilities), directors’ and officers’ liability, crime, foreign risks, environmental liability, ocean cargo liability and flood through insurance policies provided by various insurance companies up to amounts we consider sufficient to protect against losses due to claims associated with these risks.
We also maintain bonds with certain Federal, state and international authorities to insure against risks relating to, among other things, delays due to customs clearances, compliance with certain laws and regulations and import and export of goods.
Safety
Consistent with other strategic initiatives, management is pursuing a ‘Best in Class’ performance status for employee safety including participation in the Occupational Safety and Health Administration (“OSHA”) sponsored Voluntary Protection Program, or VPP. The Safety Excellence / VPP initiative shifts the safety paradigm to an aggressive proactive approach that stresses strong employee participation and collaboration, management accountability, employee training and hazard elimination as core foundational elements.
Patents, Trademarks and Other Intellectual Property Rights
Chase Brass has exclusive intellectual property licenses, the longest of which extends to 2027, to produce and sell Eco Brass® rod and ingot in North America, granted by Mitsubishi Shindoh Company, Ltd., the Japanese company that owns the relevant intellectual property rights. The most popular versions of Eco Brass® are protected through May 2019. We

12

Table of Contents

have sublicensed our rights to three sublicensees, none of which is currently a competitor of any of our subsidiaries or segments. These sublicensing arrangements are valid until the expiration of the relevant patents in North America.
We have alloy licensing arrangements with companies in Germany, Japan and China.
As of December 31, 2015, we owned 117 patents, of which 39 were U.S. patents. We also own various trademarks relating to our products. As of December 31, 2015, we owned 31 trademarks, of which 17 are U.S. trademarks. Most of these are owned by GBC Metals, LLC, a wholly owned subsidiary of ours. We license the marks OLIN BRASS and OLIN METALS for metal products from Olin Corporation. These licenses continue unless we breach the license agreement. We also license stylized versions of these marks from Olin Corporation and the license to the stylized version includes an annual termination option by either party.
We license the intellectual property rights related to certain proprietary alloy systems to other major brass mills around the world, including Dowa Metaltech. As of December 31, 2015, there were six such licenses.
Government Contract
The United States Mint is a significant customer of Olin Brass, which has been an authorized supplier to the United States Mint since 1969 and currently has a contractual arrangement to supply nickel and brass coinage strip to multiple United States Mint facilities through 2017. The United States Mint can terminate our contract in whole or in part when it is in the best interest of the United States Mint to do so and any damages payable to us by the United States Mint for such termination would not include lost profits.
Seasonality
There is a slight decrease in our net sales in the fourth quarter as a result of the decrease in demand due to customer shutdowns for the holidays and year-end maintenance of plants and inventory by customers. We also typically experience slight working capital increases in the first fiscal quarter as our customers build inventory to serve the seasonal building and housing market.
Available Information
Our website address is http://www.gbcholdings.com. We make available on our website, free of charge, the periodic reports that we file with or furnish to the Securities and Exchange Commission (“SEC”), as well as all amendments to these reports, as soon as reasonably practicable after such reports are filed with or furnished to the SEC. We also make available on our website or in printed form upon request, free of charge, our Corporate Governance Guidelines, Code of Business Conduct and Ethics, charters for the standing committees of our Board of Directors and other information related to the Company. We are not including the information contained on our website as a part of, or incorporating it by reference into, this report.
The public may read and copy any materials that we file with the SEC at the SEC’s Public Reference Room at 100 F Street, N.E., Washington D.C. 20549. The public may obtain information about the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330. The SEC maintains an internet site (http://www.sec.gov) that contains reports, proxy and information statements and other information related to issuers that file electronically with the SEC.

13

Table of Contents

Item 1A. Risk Factors.
We are exposed to various risks as we operate our businesses. To provide a framework to understand our operating environment of the Company, we are providing a brief explanation of the more significant risks associated with our businesses. Although we have tried to identify and discuss key risk factors, others could emerge in the future.
Risks Related to Our Business
Our business, financial condition and results of operations or cash flows could be negatively affected by downturns in economic cycles in general or cyclicality in our markets, both inside and outside of the U.S. Our future growth also depends, to a significant extent, on improvements in general economic conditions and in conditions in our markets.
Many of our products are used in industries that are, to varying degrees, cyclical and have historically experienced periodic downturns due to factors such as economic conditions, energy prices, the availability of credit, consumer sentiment, demand and other factors beyond our control. These economic and industry downturns have resulted in diminished product demand and excess capacity for our products. The significant deterioration in economic conditions that occurred during the second half of 2008 and continued into 2009 resulted in disruptions in a number of our markets. Any future economic disruptions may negatively impact our markets or the consumers served by those markets, which would adversely affect our operating results.
Future disruptions in the commercial credit markets may impact liquidity in the global credit market, and we are not able to predict the impact any such worsening conditions would have on our customers in general, and our results of operations specifically. Businesses in one or more of the markets that we serve, or consumers in one or more of the markets that our customers serve, may postpone or choose not to make purchases in response to economic uncertainty, tighter credit, negative financial news, unemployment, interest rates, adverse consumer sentiment and declines in housing prices or other asset values.
A significant amount of our volume is tied to the building and housing sector. If the housing, remodeling and residential and commercial construction markets stagnate or deteriorate, demand from such markets for our products, especially our brass rod products, is likely to be adversely affected. Any recovery in such markets will not necessarily directly correlate with increased sales or profitability. Our key products are typically installed late in the housing construction cycle, meaning there is an inherent lag in volumes, and sales of our building and housing products can be affected by factors such as housing mix (unit size, unit price point and the mix of multi-family versus single-family construction). Sales of our products can also be impacted by the actual timing of housing starts and completions as well as to changes in the materials and fixtures used in construction that may contain fewer copper products or materials and fixtures than were used in the past. In addition, competition from imports and other sources may also dampen the effects of any such recovery on our results of operations.
Similarly, the automotive market has in the past experienced significant downturns in connection with, or in anticipation of, declines in general economic conditions. Demand for vehicles depends largely on the strength of the economy, employment levels, consumer confidence levels, the availability and cost of credit and the cost of fuel. Negative economic developments could reduce demand for new vehicles, causing our customers to reduce their vehicle and automotive component part production in North America.
The coinage and general consumer markets are also affected by economic cycles. Demand for coinage-related products generally increases with the number of cash transactions that occur, and the number of cash transactions generally increases during periods of economic growth. Demand for consumer goods is also very sensitive to economic conditions and drives demand in our electronics / electrical components market.
The munitions market is cyclical and is not correlated to any general economic indicators and thus, has a high degree of volatility.
As a result, cyclicality in economic conditions and in the markets that we serve could have a material adverse effect on our business, financial condition, results of operations and cash flows. Our growth prospects also depend, to a significant extent, on the degree by which general economic conditions and conditions in the markets that we serve continue to improve.

14

Table of Contents

Failure to maintain our balanced book approach would cause increased volatility in our profitability and our operating results and may result in significant losses.
Copper scrap and cathode are subject to significant cyclical price fluctuations. The availability and price of copper scrap and cathode depend on a number of factors outside our control, including general economic conditions, international demand for metal and internal recycling activities by primary copper producers and other consumers of copper. The cost of copper scrap and cathode represents the largest component of our cost of sales.
We use our balanced book approach to substantially reduce the impact of metal price movements on operating margins from our non-toll sales, which are sales for which we assume responsibility for metal procurement and then recover the metal replacement cost from the customer. Non-toll sales represented approximately 75% of our unit sales volume over the last three years. Under our balanced book approach, we seek to match the timing, quantity and price of the metal component of net sales with the timing, quantity and price of replacement metal purchases on all of our non-toll sales. We use a combination of matching price date of shipment terms, firm price terms and derivatives transactions to achieve our balanced book. See “Management’s Discussion and Analysis of Financial Condition and Results of Operations—Key Factors Affecting Our Results of Operations—Balanced Book.”
We may not be able to maintain our balanced book if our customers become unwilling to bear metal price risk through the matching of price date of shipment terms. We may also not be able to find counterparties for the derivatives transactions entered into in connection with firm price terms, and the cost of those derivatives transactions may increase such that entering into such transactions is no longer cost-effective to us. Those risks may increase during periods of very high copper prices or increased volatility in those prices.
If we fail to effectively maintain our balanced book, our profitability will be significantly affected by fluctuations in metal costs and our ability to recoup metal costs through product pricing. As a result, the volatility of our results of operations would increase dramatically. Furthermore, if we are unable to maintain our balanced book approach, we will potentially replace metal at a different price than the price recovered from the customer, generating a loss in circumstances where the replacement price is higher than the price recovered from the customer.

Although we maintain our balanced book approach, metal costs still affect our profitability through “shrinkage” and inventory valuation adjustments.
Shrinkage loss, which is primarily the loss of raw metal that occurs in the melting and casting operations, is an inherent part of a metal fabrication and conversion business. Despite our use of our balanced book approach to mitigate the impact of metal price fluctuations, we must bear the cost of any shrinkage during production, which may increase the volatility of our results of operations. Because we process a large amount of metal in our operations, a small increase in our shrinkage rates can have a significant effect on our margins and profitability. In addition, if metal prices increase, the same amount of shrinkage will have a greater effect on our manufacturing costs and have a more significant negative impact on our margins and profitability.
The market price of metals and related scrap used in production is subject to significant volatility. During periods when open-market prices decline below net book value, we may need to record a provision to reduce the carrying value of our inventory and increase cost of sales. Additionally, the cost of our inventories is primarily determined using the last-in, first-out (“LIFO”) method. Under the LIFO inventory valuation method, changes in the cost of raw materials and production activities are recognized in cost of sales in the current period. In a period of rising raw material prices, cost of sales expense recognized under LIFO is generally higher than the cash costs incurred to acquire the inventory sold. Conversely, in a period of declining raw material prices, cost of sales recognized under LIFO is generally lower than cash costs incurred to acquire the inventory sold. The impact of LIFO accounting on our financial results may be significant with respect to period-to-period comparisons. During 2015, certain domestic metal inventory quantities were reduced, resulting in a liquidation of LIFO inventory layers carried at higher costs prevailing in prior years as compared with metal prices prevailing in the market at the time of the inventory depletion and the effect of this reduction of inventory increased cost of sales by $0.1 million. See “Management’s Discussion and Analysis of Operating Results and Financial Condition—Key Factors Affecting Our Results of Operations—Metal Cost.”

15

Table of Contents

Because our balanced book approach does not reduce the effects of fluctuations in metal prices on our working capital requirements, higher metal prices could have a negative effect on our liquidity.
Our balanced book approach does not reduce the impact of the volatility in metal prices on our working capital requirements. Metal prices impact our investment in working capital because our collection terms with our customers are longer than our payment terms to our suppliers. As a result, when metal prices are rising, even if the number of pounds of metal we process does not change, we tend to use more cash or draw more on our asset-based revolving loan facility (“ABL Facility”) to cover the cash flow delay from material replacement purchase to cash collection. Thus, when metal prices increase, our working capital may be negatively affected as we are required to draw more on our cash or available financing sources to pay for raw materials. As a result, our liquidity may be negatively affected by increasing metal prices. Metal price volatility may also require us to draw on working capital sources more quickly and unpredictably, and therefore at higher cost. See “Management’s Discussion and Analysis of Operating Results and Financial Condition—Key Factors Affecting Our Results of Operations—Metal Cost.”
Limited access to raw materials, infrastructure or fuel could negatively affect our business, financial condition or results of operations or cash flows.
Our ability to fulfill our customer orders in a timely and cost-effective manner depends on our ability to secure a sufficient and constant supply of raw materials and fuel and access to infrastructure adequate to fulfill our business needs. Although we often seek to source our copper from scrap, including internally generated scrap and repurchases of our customers’ scrap, where scrap is either not available or is not appropriate for use, we use virgin raw materials such as copper cathode, which are generally more expensive than scrap. We depend on natural gas for our manufacturing operations and source natural gas through open-market purchases.
We depend on scrap for our operations and acquire our scrap inventory from numerous sources. These suppliers generally are not bound by long-term contracts and have no obligation to sell scrap metals to us. In periods of low metal prices, suppliers may elect to hold scrap waiting for higher prices. The supply of scrap metal available to us could be adversely impacted at any time due to slowdowns in industrial production or consumer consumption. If an adequate supply of scrap metal is not available to us, we would be unable to use scrap as a source of supply at desired volumes, forcing us to use a larger amount of more expensive virgin raw materials and our results of operations and financial condition would be materially and adversely affected. The acquisition of copper cathode by physically backed copper exchange traded funds and other similar entities may materially decrease or interrupt the availability of copper for immediate delivery in the United States, which could materially increase our cost of copper and copper scrap, result in potential supply shortages, and increase price volatility for copper and copper scrap. All of the above factors may affect our ability to secure the necessary raw materials in a cost-effective manner for production of our products.
We may experience disruptions in the supply of natural gas as a result of delivery curtailments to industrial customers due to extremely cold weather. We may also experience disruptions or increases in cost with respect to our access to water, electrical power, transport and wastewater treatment services and other infrastructure (including those subject to our transition services agreement with the parent of our predecessor). We may also experience other delays or shortages in the supply of raw materials. If we are unable to obtain adequate, cost efficient or timely deliveries of required raw materials and fuel or adequate and cost-effective access to infrastructure, we may be unable to manufacture sufficient quantities of products on a timely basis. This could cause us to lose sales, incur additional costs, delay new product introductions or harm our reputation in the markets that we serve. An inability to find an adequate and timely supply of raw materials or adequate and cost-effective access to infrastructure could have a material adverse effect on our profit margin, and in turn on our business, financial condition, results of operations or cash flows.

16

Table of Contents

Increases in the cost of energy could cause our cost of sales to increase, thereby reducing operating results and limiting our operating flexibility.
In 2015, the cost of energy and utilities represented approximately 7% of our non-metal cost of sales and prices can be volatile. As a result, our energy and utility costs may fluctuate dramatically, and we may not be able to mitigate the effect of higher energy and utility costs on our cost of sales. A substantial increase in energy costs could cause our operating costs to increase and our business, financial condition, results of operations and cash flows may be materially and adversely affected. Although we attempt to mitigate short-term volatility in energy and utility costs through the use of derivatives contracts, we may not be able to eliminate the long-term effects of such cost volatility. Furthermore, in an effort to offset the effect of increasing costs, we may have also limited our potential benefit from declining costs.
Our substantial leverage and debt service obligations may adversely affect our financial condition and restrict our operating flexibility, including our ability to raise additional capital to fund our operations, limit our ability to react to changes in the economy or our industry and prevent us from meeting our obligations under our indebtedness.
We are highly leveraged. As of December 31, 2015, our total indebtedness was $343.1 million (net of debt issuance costs). We also had an additional $196.9 million available for borrowing under the ABL Facility as of that date. Based on the amount of indebtedness outstanding and applicable interest rates at December 31, 2015, our annualized cash interest expense would be $33.2 million, which includes $0.4 million of interest expense related to our capital lease obligations. Additionally, we may potentially borrow under the ABL Facility, which is a floating-rate obligation, and thus, the related interest expense is subject to increase in the event interest rates were to rise.
Our substantial indebtedness and debt service obligations could have important consequences for investors, including:
 
they may impose, along with the financial and other restrictive covenants under our credit agreements, significant operating and financial restrictions, including our ability to borrow money, dispose of assets or raise equity for our working capital, capital expenditures, dividend payments, debt service requirements, strategic initiatives or other purposes;
they may limit our flexibility in planning for, or reacting to, changes in our operations or business;
we may be more highly leveraged than some of our competitors, which may place us at a competitive disadvantage; and
they may make us more vulnerable to downturns in our business or the economy.
Any of these consequences could have a material adverse effect on our business, financial condition, results of operations, prospects and ability to satisfy our obligations under our indebtedness. In addition, there would be a material adverse effect on our business, financial condition, results of operations and cash flows if we were unable to service our indebtedness or obtain additional financing, as needed.
Covenants under our debt agreements impose operating and financial restrictions. Failure to comply with these covenants could have a material adverse effect on our business, financial condition, results of operations or cash flows.
The agreement governing the ABL Facility and the indenture governing the 9.50% Senior Secured Notes due 2019 (“Senior Secured Notes”) contain various covenants that limit or prohibit our ability, among other things, to:
 
incur or guarantee additional indebtedness;
pay dividends on our capital stock or redeem, repurchase, retire or make distributions in respect of our capital stock or subordinated indebtedness or make certain other restricted payments;
make certain loans, acquisitions, capital expenditures or investments;
sell certain assets, including stock of our subsidiaries;
enter into certain sale and leaseback transactions;
create or incur certain liens;
consolidate, merge, sell, transfer or otherwise dispose of all or substantially all of our assets;
enter into certain transactions with our affiliates; and
engage in certain business activities.
The agreement governing the ABL Facility also contains a financial covenant that requires us to maintain a fixed charge coverage ratio that is tested whenever excess availability, as defined in such agreement, falls below a certain level. The fixed charge coverage ratio, as defined in the agreement, requires us to maintain a minimum ratio of “EBITDA” (as defined in the agreement governing the ABL Facility) to the amount of our fixed charges for the twelve consecutive months prior to the date on which the ratio is tested. The agreement governing the ABL Facility also requires excess

17

Table of Contents

availability to remain above a certain level to avoid default. For more information regarding these covenants, please see “Management’s Discussion and Analysis of Financial Condition and Results of Operations—Liquidity and Capital Resources—Covenant Compliance” and “Outstanding Indebtedness.”
As of December 31, 2015, we were in compliance with all of the covenants contained in our debt agreements. A violation of covenants may result in default or an event of default under our debt agreements.
Upon the occurrence of an event of default under the agreement governing the ABL Facility or the indenture governing the Senior Secured Notes, the requisite lenders under the ABL Facility or the requisite noteholders under the indenture could elect to declare all amounts of such indebtedness outstanding to be immediately due and payable and, in the case of the ABL Facility, terminate any commitments to extend further credit. If we are unable to repay those amounts, the lenders under such facilities may proceed against the collateral granted to them to secure such indebtedness. Substantially all of our assets are pledged as collateral under the ABL Facility and to secure the Senior Secured Notes. If the lenders or noteholders, as applicable, accelerate the repayment of borrowings, such acceleration would have a material adverse effect on our business, financial condition, results of operations or cash flows. Furthermore, cross-default provisions in the ABL Facility provide that any default under the indenture governing the Senior Secured Notes or other significant debt agreements could trigger a cross-default under the ABL Facility. If we are unable to repay the amounts outstanding under these agreements or obtain replacement financing on acceptable terms, which ability will depend in part upon the impact of economic conditions on the liquidity of credit markets, our creditors may exercise their rights and remedies against us and the assets that serve as collateral for the debt, including initiating a bankruptcy proceeding.
Although the terms of the credit agreement governing the ABL Facility and the indenture governing the Senior Secured Notes contain restrictions on our ability to incur additional indebtedness, these restrictions are subject to a number of important qualifications and exceptions, which would allow us to borrow additional indebtedness. Additional leverage could have a material adverse effect on our business, financial condition and results of operations and could increase other risks harmful to our financial condition and results of operations.
For a more detailed description on the limitations on our ability to incur additional indebtedness and our compliance with financial covenants, please see “Management’s Discussion and Analysis of Financial Condition and Results of Operations—Liquidity and Capital Resources—Covenant Compliance” and “Outstanding Indebtedness.”
To service our indebtedness, we will require a significant amount of cash. Our ability to generate cash and the availability of our cash to service our indebtedness depends on many factors beyond our control, and any failure to meet our debt service obligations could harm our business, financial condition and results of operations.
Our ability to satisfy our debt obligations will primarily depend upon our future operating performance. As a result, prevailing economic conditions and financial, business and other factors, many of which are beyond our control, will affect our ability to generate cash to satisfy our debt obligations. Included in such factors are the requirements, under certain scenarios, of our counterparties that we post cash collateral to maintain our hedging positions. In addition, metal price declines, by reducing our borrowing base, could limit availability under the ABL Facility and further constrain our liquidity.
If we do not generate sufficient cash flow from operations to satisfy our debt service obligations, including payments required to be made on the ABL Facility and the Senior Secured Notes, we may have to undertake alternative financing plans, such as refinancing or restructuring our indebtedness, selling assets, reducing or delaying capital investments or seeking to raise additional capital. Our ability to restructure or refinance our indebtedness will depend on the condition of the capital markets and our financial condition at such time. Any refinancing of our indebtedness could be at higher interest rates and may require us to comply with more onerous covenants, which could further restrict our business operations. The terms of existing or future debt instruments (including the ABL Facility and the Senior Secured Notes) may restrict us from adopting some of these alternatives, which in turn could exacerbate the effects of any failure to generate sufficient cash flow to satisfy our debt service obligations. In addition, any failure to make payments of interest and principal on our outstanding indebtedness on a timely basis would likely result in a reduction of our credit ratings, which could harm our ability to incur additional indebtedness or refinance our indebtedness on acceptable terms.
Our inability to generate sufficient cash flow to satisfy our debt service obligations, or to refinance our obligations at all or on commercially reasonable terms, would have an adverse effect, which could be material, on our business, financial condition and results of operations, may restrict our current and future operations, particularly our ability to respond to business changes or to take certain actions, as well as on our ability to satisfy our obligations in respect of the ABL Facility and the Senior Secured Notes.

18

Table of Contents

Because some of our indebtedness bears interest at rates that fluctuate with changes in certain prevailing short-term interest rates, we are vulnerable to interest rate increases.
As of December 31, 2015, we had less than $0.1 million outstanding under the ABL Facility, which bears interest at rates that fluctuate with changes in certain prevailing short-term interest rates. If we borrow under the ABL Facility and if interest rates increase dramatically, we could be unable to service our debt, which could have a material adverse effect on our business, financial condition, results of operations or cash flows.
If we were to lose order volumes from any of our largest customers, our sales volumes, revenues and cash flows could be reduced.
Our business is exposed to risks related to customer concentration. Our five largest customers were responsible for approximately 30% of our net sales in 2015. A loss of order volumes from, or a loss of industry share by, any major customer could negatively affect our business, financial condition or results of operations by lowering sales volumes, increasing costs and lowering profitability. In addition, adverse economic and market conditions could also harm our business by negatively affecting our customers, which could impair their ability to pay for products they have purchased from our Company. Our balance sheet reflected an allowance for doubtful accounts totaling $1.2 million at December 31, 2015. If adverse economic and market conditions impair the ability of our customers to pay us in the future, our allowance for doubtful accounts and write-offs of accounts receivable from the Company’s customers may increase in the future, which could materially and adversely affect our financial condition and results of operations.
We do not have long-term contractual arrangements with a substantial number of our customers, and our sales volumes and net sales could be reduced if our customers switch some or all of their business with us to other suppliers.
In 2015, a majority of our net sales were generated from customers who do not have long-term contractual arrangements with us, including several of our largest customers. These customers purchase products and services from us on a purchase order basis and may choose not to continue to purchase our products and services. A significant loss of these customers or a significant reduction in their purchase orders could have a material negative impact on our sales volume and business, or cause us to reduce our prices, which could have a material adverse effect on our business, financial condition, results of operations and cash flows.
Our business could be disrupted if our customers shift either their manufacturing or sourcing offshore.
Much of our business depends on maintaining close geographical proximity to our customers because the costs of transporting metals across large distances can be prohibitive. If the general trend in relocating or contracting manufacturing capacity to foreign countries continues, especially those in the automotive parts, electrical connectors, and building and housing components industries, such relocations or contracting may disrupt or end our relationships with some customers and could lead to losing business to foreign competitors. In addition, some customers may seek to source their finished products offshore, thereby also increasing the amount of manufacturing offshore and thereby reducing demand for brass rod in the United States. These risks would increase to the extent we are unable to expand internationally when our customers do so.
Decreased demand from the United States Mint could have a material adverse effect on our business, financial condition and results of operations.
The United States Mint is a significant customer of Olin Brass. Olin Brass has a contractual arrangement to supply nickel and brass coinage strip to the two United States Mint locations. Our supply agreement with the United States Mint runs through 2017. The United States Mint can also terminate the contract in whole or in part for convenience, and the damages payable to us by the United States Mint for such a termination do not include lost profits. The loss or reduction of any authorized supplier arrangement with the United States Mint for coin manufacture could have a material adverse effect on our business, financial condition and results of operations. In addition, the United States Government contracting and procurement cycle can be affected by the timing of, and delays in, the legislative process. As a result, our net sales and operating income may fluctuate, causing us to occasionally experience declines in net sales or earnings as compared to the immediately preceding quarter, and comparisons of our operating results on a period-to-period basis may not be meaningful.
Additionally, the U.S. Treasury department announced in December 2011 a halt in the production of Presidential dollar coins for circulation due to a lack of demand (which is primarily the result of the U.S. continuing the use of the dollar bill).

19

Table of Contents

Although their production will continue for the collectibles market, it is uncertain when their production for circulation will be resumed. This action has adversely impacted our business and is expected to adversely impact our business over the next several years. In addition, in December 2013, three members of the Federal Reserve Board of Governors issued a report that concluded that a transition to the dollar coin would result in higher net costs to the Federal government and to the public, which contrasts with previous reports by the Government Accountability Office that there would be a net benefit from a transition. Further actions to curtail coin production could have an adverse effect on our business, financial condition or results of operations.
Following trends in electronic commerce, the United States Mint in the future may reduce its output of coinage and thus reduce its demand for coinage strip. A reduction in demand for coinage strip could have a material adverse effect on our business, financial condition and results of operations.
Decreased demand from Orbital ATK, Inc. (“ATK”) could have a material adverse effect on our business, financial condition and results of operations.
Currently, a sizeable share of the production of our Olin Brass segment supports ATK, a supplier of munitions to the U.S. Army. ATK uses our product to service its contract with the U.S. Army to supply the U.S. Army’s arsenal located at Independence, Missouri. ATK is under contract with the U.S. Army to supply it with small-caliber ammunition and Olin Brass is under contract to supply ATK. In spite of these contractual arrangements, any decrease in demand from ATK or other disruption of our relationship with ATK could have a material adverse effect on our business, financial condition and results of operations.
Competition in our industry could adversely affect our business, financial condition and results of operations.
We are engaged in a highly competitive industry. Each of our segments competes with a limited number of companies. The Olin Brass segment competes with domestic and foreign manufacturers of copper and brass alloys in the form of strip, sheet and foil. The Chase Brass segment competes with domestic as well as foreign manufacturers of brass rod and beginning in 2013, encountered increased competition from foreign rod suppliers. The A.J. Oster segment primarily competes with distributors, mills and processors of copper and brass products. Furthermore, we believe that domestic sales to customers that are not made by major companies, including us, are fragmented among many smaller companies. In the future, these smaller companies may choose to combine, creating a more significant domestic competitor against our business. We may be required to explore additional initiatives in each of our segments in order to maintain our sales volume at a competitive level. Increased competition in any of the fields in which our segments operate could adversely affect our business, financial condition and results of operations.
Currently, anti-dumping orders impose import duties on copper and brass products from France, Germany, Italy and Japan which allow us and our domestic competitors to compete more fairly against French, German, Italian and Japanese producers in the U.S. copper and brass product market. On March 21, 2012, the International Trade Commission (“ITC”) Commissioners voted to continue anti-dumping orders for brass sheet and strip from Germany, Italy, France and Japan. While domestic manufacturers lobby for the continued extension of these orders, if they expire, import duties on metal products from these countries will be significantly reduced, increasing the ability of such foreign producers to compete with our products domestically. Additionally, on March 15, 2012, the United States-Korea Free Trade Agreement (“KORUS FTA”) became effective, which largely eliminates tariffs on Korean industrial products imported to the United States. The reduction in prices of Korean products resulting from the KORUS FTA has increased the ability of Korean manufacturers to compete with our products and has had a negative effect on our business. Furthermore, the termination of any anti-dumping orders or other changes to international trade regimes could adversely affect our business, financial condition and results of operations.
Adverse developments in our relationship with our employees could have a material adverse effect on our business, financial condition, results of operations and cash flows.
As of December 31, 2015, we had 1,900 employees, 1,168, or approximately 61%, of whom at various sites were members of unions. We have generally maintained good relationships with all unions and employees, which has been an important aspect of our ability to be competitive in our industry. The current collective bargaining agreements that are in place are a meaningful determinant of our labor costs and are very important to our ability to maintain flexibility to fulfill our customers’ needs. As we attempt to renew our collective bargaining agreements, labor negotiations may not conclude successfully and, in that case, may result in a significant increase in the cost of labor or may result in work stoppages or labor disturbances, disrupting our operations. Any such cost increases, stoppages or disturbances could have a material

20

Table of Contents

adverse effect on our business, financial condition, results of operations and cash flows by limiting plant production, sales volumes and profitability.
Our participation in multi-employer union pension plans may have a material adverse effect on our financial performance.
We are required to make contributions to the IAM National Pension Plan (“IAM Plan”), a multi-employer pension plan that covers certain of our union employees. Our U.S. multi-employer pension plan expense totaled $3.8 million in 2015. Our obligations may be impacted by the funded status of the plan, the plan’s investment performance, changes in the participant demographics, financial stability of contributing employers and changes in actuarial assumptions. In addition, if a participating employer becomes insolvent and ceases to contribute to a multiemployer plan, the unfunded obligation of the plan will be borne by the remaining participating employers. Under current law, an employer that withdraws or partially withdraws from a multi-employer pension plan may incur withdrawal liability to the plan. If, in the future, we choose to withdraw from the multi-employer pension plan in which we participate, we will likely need to record withdrawal liabilities, which could negatively impact our financial performance in the applicable periods.
Our operations are subject to risks of natural disasters, acts of war, terrorism or widespread illness at our domestic and international locations, any one of which could result in a business stoppage and negatively affect our business, financial condition or results of operations.
Our business operations depend on our ability to maintain and protect our facilities, computer systems and personnel. Our facilities and transportation for our employees are susceptible to damage from earthquakes and other natural disasters such as fires, floods, hurricanes, tornadoes and similar events. We have facilities located throughout North America, including in Illinois, Ohio, Connecticut, Rhode Island, Missouri, California, Puerto Rico and Mexico, as well as in China. We take precautions to safeguard our facilities, including obtaining insurance and maintaining health and safety protocols. However, a natural disaster, such as a tornado, fire, flood, hurricane or earthquake, could cause a substantial interruption in our operations, damage or destroy our facilities or inventory and cause us to incur additional expenses. The insurance we maintain against natural disasters may not be adequate to cover our losses in any particular case, which would require us to expend significant resources to replace any destroyed assets, thereby harming our financial condition and prospects significantly.
For example, Olin Brass’s manufacturing facilities and A.J. Oster’s California facility are located near geologic fault zones, and therefore are subject to greater risk of earthquakes which could result in increased costs and a disruption in our operations, which could harm our operating results and financial condition significantly. Our facility in East Alton, Illinois is located in a flood zone, and all of our facilities in the Midwestern United States are subject to the risk of tornadoes and damaging winds. Should earthquakes or other catastrophes, such as fires, tornadoes, hurricanes, floods, power outages, communication failures or similar events disable our facilities, we do not have readily available alternative facilities from which we could continue our operations, and any resulting stoppage could have a negative effect on our operating results. Acts of terrorism, widespread illness and war could also have a negative effect at our international and domestic facilities.
Any prolonged disruptions at or failures of our manufacturing facilities and equipment could have a material adverse effect on our business, financial condition, results of operations and cash flows.
Our ability to satisfy our customers’ orders in an efficient manner and to effectively manage inventory levels is dependent on the proper operation of our facilities and equipment. On-time delivery and accurate order fulfillment are essential to maintaining customer satisfaction and generating repeat business. To the extent we experience prolonged equipment failures, quality control incidents or other disruptions such as a major fire at our manufacturing facilities, our ability to satisfy our customers could be negatively impacted, and if, as a result, customer satisfaction decreased, this would have a material adverse effect on our business, financial condition, results of operations and cash flows.
In addition, we do not have redundancy in our operations on certain critical pieces of equipment, including the Olin Brass hot and cold mills and Chase Brass extruders. If this equipment were damaged, we would have to make alternative arrangements to replicate these processes, which could be costly and result in manufacturing delays, which could materially adversely affect our business, financial condition and results of operations.

21

Table of Contents

Inclement weather conditions could adversely affect our business, financial condition and results of operations.
Inclement weather conditions in the areas where our facilities are located could have an adverse effect on our business, financial condition and results of operations. Extreme cold, heavy snowfall or other extreme weather conditions over a prolonged period could result in temporary facility closures, disruptions in our access to natural gas, electricity, fuel and other raw materials and delayed shipments of our products. Furthermore, inclement weather conditions also could disrupt the operations of one or more of our suppliers and result in production delays. Any of these events or circumstances could materially disrupt our business operations and thereby adversely affect our business, financial condition and results of operations.
Failure to meet the capital expenditure requirements for the introduction of new products or substantial further increases in the production of existing products could have a material adverse effect on our business, financial condition and results of operations.
Certain of our existing products, such as Eco Brass® and other potential “green portfolio” products, require separate production streams from those used for our other products in order to comply with applicable standards. As a result, in order to meet expected increased demand for such products, we will be required to make additional capital expenditures to modify or expand our facilities. In addition, if we introduce new products in the future, those products may also require modification or expansion of our production facilities. To accommodate any such production changes, we will be required to make additional capital expenditures to expand or modify our facilities. If we are unable to meet our capital expenditure requirements, we may not be able to timely respond to our customers’ needs and may lose their business to our competitors who may be better equipped to meet these needs, which could have a material adverse effect on our business, financial condition and results of operations.
The increased use of substitute materials and miniaturization may adversely affect our business.
In many applications, copper and other commodities may be replaced by other materials such as aluminum, stainless steel, plastic and other materials and the use of copper and other commodities may be reduced by the miniaturization of components. Increased prices of copper could encourage our customers to use substitute materials and / or miniaturization to limit the amount of copper in their products and applications in an attempt to control their overall product costs. For example, historically, there has been discussion over reducing or eliminating copper content in coins in reaction to the rising prices of copper. Such increased use of substitute materials and / or miniaturization could have a material adverse effect on prices and demand for our products.
In order to operate our business successfully, we must meet evolving customer requirements for copper and copper-alloy products and invest in the development of new products.
If we fail to develop or enhance our products to satisfy evolving customer demands, our business, operating results, financial condition and prospects may be harmed significantly. The market for copper and copper-alloy products is characterized by changing technologies, periodic new product introductions and evolving customer and industry standards. Eco Brass® and other products in our “green portfolio” are examples of new products based on new technologies that have been developed as a result of evolving customer and industry standards. Our competitors are continuously searching for more cost-effective alloys and substitutes for copper and copper-alloys, including products in our “green portfolio.” Our current and prospective customers may choose products that might be offered at a lower price than our products. To achieve market acceptance for our products, we must effectively and timely anticipate and adapt to customer requirements and offer products and services that meet customer demands. This strategy may cause us to pursue other technologies or capabilities through acquisitions or strategic alliances. We may experience design, engineering and other difficulties that could delay or prevent the development, introduction or marketing of new products and services. Our failure to successfully develop and offer products or services that satisfy customer requirements may significantly weaken demand for our products and services, which would likely cause a decrease in our net sales and harm our operating results. In addition, if our competitors introduce products and / or services based on new or alternative technologies, our existing and future products and / or services could become obsolete, which would also weaken demand for our products or services, thereby decreasing our net sales and harming our operating results.

22

Table of Contents

If we fail to implement our business strategy, including our growth initiatives, our business, financial condition, results of operations or cash flows could be adversely affected.
Our future financial performance and success depend in large part on our ability to successfully implement our business strategy. We may not be able to successfully implement our business strategy or be able to continue improving our operating results. In particular, we may not be able to continue to achieve all operating cost savings, further enhance our product mix, expand into selected targeted regions or continue to mitigate our exposure to metal price fluctuations.
The implementation of our business strategy may be affected by a number of factors beyond our control, such as increased competition, legal and regulatory developments, general economic conditions, the increase of operating costs or our ability to introduce new products and end-use applications. Any failure to successfully implement our business strategy could adversely affect our business, financial condition, results of operations or cash flows. We may, in addition, decide to alter or discontinue certain aspects of our business strategy at any time.
Furthermore, we may not be successful in our growth initiatives and may not be able to effectively manage expanded or acquired operations. See “We face a number of risks related to future acquisitions and joint ventures.”
A portion of our net sales is derived from our international operations, which exposes us to certain risks inherent in doing business abroad.
In the aggregate, our international operations accounted for 6% of our net sales in 2015. We have operations in China through Olin Luotong Metals and in Singapore through our subsidiary GBC Metals Asia Pacific PTE. In addition, we have various licensing agreements around the world and our products are distributed globally. We plan to continue to explore opportunities to expand our international operations. Our international operations generally are subject to risks, including:
 
changes in U.S. and international governmental regulations, trade restrictions and laws, including tax laws and regulations;
currency exchange rate fluctuations;
tariffs and other trade barriers;
the potential for nationalization of enterprises or government policies favoring local production;
interest rate fluctuations;
high rates of inflation;
currency restrictions and limitations on repatriation of profits;
differing protections for intellectual property and enforcement thereof;
divergent environmental laws and regulations;
political, economic and social instability;
unfamiliarity with foreign laws and regulations and ability to enforce obligations of foreign counterparties;
difficulties in staffing and managing international operations and labor unrest;
language and cultural barriers;
natural disasters and widespread illness;
geopolitical conditions, such as terrorist attacks, war, or other military action; and
a divergence between the price of copper on the copper exchange in China and the LME, and the COMEX.
The occurrence of any of these events could cause our costs to rise, limit growth opportunities or have a negative effect on our operations and our ability to plan for future periods, and subject us to risks not generally prevalent in North America.
New governmental regulations or legislation, or changes in existing regulations or legislation, may subject us to significant costs, taxes and restrictions on our operations.
Our operations are subject to a wide variety of U.S. Federal, state, local and non-U.S. laws and regulations, including those relating to taxation, international trade and competition and firearms.
For example, the Olin Brass segment provides strip and cups to both the military and commercial munitions markets. In 2015, the shipments by Olin Brass to the munitions market accounted for 38% of its total shipments. The private use of firearms is subject to extensive regulation. Recent U.S. Federal legislative activities generally seek either to restrict or ban the sale and, in some cases, the ownership of various types of firearms and ammunition. Several states currently have laws in effect similar to that legislation. Any restriction on the use of firearms and ammunition could affect the demand for munitions, and in turn could negatively affect our business, financial condition or results of operations. Moreover, any changes in the government budget or policy over military spending may adversely affect our contracts with customers in the munitions market.

23

Table of Contents

Changes in U.S. or foreign tax laws, including possibly with retroactive effect, and audits by tax authorities could result in unanticipated increases in our tax expense and affect profitability and cash flows. From time to time, legislative initiatives are proposed in the U.S., such as the repeal of the election to use LIFO or to lower the U.S. corporate tax rate. If the U.S. corporate tax rate were lowered, we would be required to reduce our net deferred tax assets upon enactment of the related tax legislation, with a corresponding material, one-time increase to income tax expense, but our income tax expense and payments would be materially reduced in subsequent years. The cost of our inventories is primarily determined using LIFO. Under the LIFO inventory valuation method, changes in the cost of raw materials and production activities are recognized in cost of sales in the current period. Generally in a period of rising prices, LIFO recognizes higher costs of goods sold, which both reduces current income and assigns a lower value to the year-end inventory. If the election to use the LIFO method for U.S. Federal income tax purposes were repealed, taxpayers that currently use the LIFO method would be required to revalue their beginning LIFO inventory to its first-in, first-out (“FIFO”) value. The repeal of the election to use the LIFO method could result in a substantial cash tax liability, which could adversely impact our liquidity and financial condition. Furthermore, a transition to the FIFO method could result in an increase in the volatility of our earnings, a greater disparity between our earnings and net sales in our financial statements, and an increase in the costs associated with our derivative transactions to mitigate metal price fluctuations.
In addition, any termination or expiration of trade restrictions imposed on copper products by foreign governments could adversely affect our business as such products become freely tradable into the U.S. This may increase competition against our products and adversely affect our business, financial condition or results of operations. See “Competition in our industry could adversely affect our business, financial condition and results of operations.”
We may not be able to sustain the annual cost savings realized as part of our cost-reduction initiatives.
We will continue to undertake productivity and cost-reduction initiatives intended to improve performance and improve operating cash flow. Although we believe that the cost savings we have realized through our efforts so far are permanent reductions, we may not be able to sustain some or all of these cost savings on an annual basis in the future, which could have an adverse effect on our business, financial condition, results of operations and cash flows. Moreover, there can be no assurance that any new initiatives undertaken in the future will be completed or beneficial to us or that any estimated cost savings from such activities will be realized.
Our operations expose our employees to risk of injury or death. We may be subject to claims that are not covered by, or exceed, our insurance. Additional safety measures or rules imposed by regulatory agencies may reduce productivity, require additional capital expenditure or reduce profitability.
Because of the manufacturing activities conducted at our facilities, there exists a risk of injury or death to our employees or other visitors, notwithstanding the safety precautions we take. Our operations are subject to regulation by Federal, state and local agencies responsible for employee health and safety, including the Occupational Safety and Health Administration, which has from time to time taken various actions with respect to our facilities, including imposing fines for certain isolated incidents. Despite policies and standards that are designed to minimize such risks, we may nevertheless be unable to avoid material liabilities for any employee death or injury that may occur in the future. These types of incidents may not be covered by or may exceed our insurance coverage and may have a material adverse effect on our results of operations and financial condition.
In addition, various regulatory agencies may impose additional safety measures or other rules designed to increase workplace safety. Compliance with such requirements could require additional capital expenditure or cause process changes that could reduce the productivity of the affected facilities, which could increase our costs and reduce our profitability.
Our ability to retain our senior management team is critical to the success of our business, and failure to do so could materially adversely affect our business, financial condition, results of operations and cash flows.
We are dependent on our senior management team to remain competitive in our industry. We have employment contracts or severance agreements with members of our senior management team, including John Wasz, Robert Micchelli, Kevin Bense, Devin Denner and William Toler. Failure to renew the employment contracts or other agreements of a significant portion of our senior management team could have a material adverse effect on our business, financial condition, results of operations and cash flows. Members of our senior management team are subject to employment conditions or arrangements that permit the employees to terminate their employment without notice. We do not maintain any life insurance policies for our benefit covering our key employees.

24

Table of Contents

If our senior management team were not able to dedicate adequate time to our business, due to personal or other factors, if we lose or suffer an extended interruption in the services of a significant portion of our senior management team, or if a significant portion of our senior management team were to terminate employment within a short period it could have a material adverse effect on our business, financial condition, results of operations and cash flows. In addition, the market for qualified individuals may be highly competitive and we may not be able to attract and retain qualified personnel to replace or succeed members of our senior management team, should the need arise.
Rising employee medical costs may adversely affect operating results.
The extent to which our employee medical costs will increase in the future is difficult to assess at this time. In 2015, our costs related to employee health benefits were $19.0 million. Because the implementation of various laws regarding employee medical costs and health insurance, including the Patient Protection and Affordable Care Act of 2010 and other related regulations, is currently in progress, there is some uncertainty as to how these current and future laws and regulations will affect our employee medical and other benefit costs. In addition, the cost of health care has been rising generally over time, and such increases have been in the past and will in the future be unpredictable and at times significant. If we were to incur significant increases in employee medical costs and related items, whether due to such laws and regulations or otherwise, it could adversely impact our operating results.
Environmental costs could decrease our net cash flow and adversely affect our profitability.
Our operations are subject to extensive regulations governing the creation, use, transportation and disposal of wastes and hazardous substances, air and water emissions, remediation, workplace exposure and other environmental matters. The costs of complying with such laws and regulations, including participation in assessments and clean-ups of sites, as well as internal voluntary programs, can be significant and will continue to be so for the foreseeable future. Future environmental regulations could impose stricter compliance requirements on us and the markets that we serve. Additional pollution control equipment, process changes, or other environmental control measures may be needed at some of our facilities to meet future requirements. Additionally, evolving regulatory standards and expectations could result in increased litigation and / or increased costs of compliance with environmental laws, all of which could have a material and adverse effect on our business, financial condition, results of operations and cash flows.
Environmental matters for which we may be liable may arise in the future at our present sites, at previously owned sites, sites previously operated by us, sites owned by our predecessors or sites that we may acquire in the future. Our operations or liquidity in a particular period could be affected by certain health, safety or environmental matters, including remediation costs and damages related to several sites. The properties we own or lease are located in areas with a history of heavy industrial use. See “Business—Government Regulation and Environmental Matters.” The CERCLA established responsibility for clean-up without regard to fault for persons who have released or arranged for disposal of hazardous substances at sites that have become contaminated and for persons who own or operate contaminated facilities. In many cases, courts have imposed joint and several liability on parties at CERCLA clean-up sites. Because a number of our properties are located in or near industrial or light industrial use areas, they may have been contaminated by pollutants which may have migrated from neighboring facilities or have been released by prior occupants. Some of our properties have been affected by releases of cutting oils and similar materials, and we are investigating and remediating such known contamination pursuant to applicable environmental laws. The costs of these clean-ups have not been material in the past. We are not currently subject to any material claims or notices with respect to clean-up or remediation under CERCLA or similar laws for contamination at our leased or owned properties or at any off-site location. However, we cannot rule out the possibility that we could be notified of such claims in the future. It is also possible that we could be identified by the Environmental Protection Agency, a state agency or one or more third parties as a potentially responsible party under CERCLA or under analogous state laws.
On November 19, 2007, we acquired the assets and operations relating to the worldwide metals business of Olin Corporation. Olin Corporation agreed to retain liability arising out of then existing conditions on certain of our properties for any remedial actions required by environmental laws, and agreed to indemnify us for all or part of a number of other environmental liabilities. Since 2007, Olin Corporation has been performing remedial actions at the facilities in East Alton, Illinois and Waterbury, Connecticut, and has been participating in remedial actions at our other properties as well. If Olin Corporation were to stop its environmental remedial activities at our properties, we could be required to assume responsibility for these activities, the cost of which could be material. For additional information concerning the indemnity granted to us by Olin Corporation for environmental liabilities, see “Business—Government Regulation and Environmental Matters.”

25

Table of Contents

New governmental regulation of greenhouse gas emissions may subject us to significant new costs and restrictions on our operations.
In the past, Congress has considered legislation that would regulate greenhouse gas emissions, including a cap-and-trade system, under which emitters would be required to buy allowances to offset emissions of greenhouse gas. In addition, several states, including states where we have manufacturing plants, are considering various greenhouse gas registration and reduction programs. The EPA has also proposed several comprehensive regulations that would require reductions in greenhouse gas emissions by several types of sources. Certain of our manufacturing plants use significant amounts of energy, including electricity, natural gas and diesel, and certain of our plants emit amounts of greenhouse gas above certain minimum thresholds that are likely to be regulated. Greenhouse gas regulation could increase the price of the electricity we purchase, increase costs for our use of natural gas, potentially restrict access to, or the use of, natural gas, require us to purchase allowances to offset our own emissions, require operational changes or the use of new equipment or result in an overall increase in our costs of raw materials, any one of which could significantly increase our costs or capital expenditures, reduce our competitiveness or otherwise negatively affect our business, financial condition or results of operations. It is too early to predict how any potential greenhouse gas regulation may affect us.
We may be subject to litigation that could strain our resources and distract management.
From time to time, we are involved in a variety of claims, lawsuits and other disputes arising in the ordinary course of business. These suits concern issues including product liability, contract disputes, employee-related matters and personal injury matters. It is not feasible to predict the outcome of all pending suits and claims, and the ultimate resolution of these matters as well as future lawsuits could have a material adverse effect on our business, financial condition, results of operations, cash flows or reputation.
We may face product liability claims that are costly and create adverse publicity.
If any of the products that we sell cause harm to any of our customers, we could be exposed to product liability lawsuits. If we were found liable under product liability claims, we could be required to pay substantial monetary damages and see a decrease in demand for our products. Further, even if we successfully defended ourselves against this type of claim, we could be forced to spend a substantial amount of money in litigation expenses, our management could be required to spend time and resources to defend against these claims, we could face negative publicity or our reputation could otherwise suffer, any of which could result in a decrease in demand for our products or otherwise harm our business.
New derivatives legislation could have an adverse impact on our ability to use derivative contracts to manage risks associated with our business and on the cost of our derivative contracts.
We use over-the-counter, or OTC, derivatives products to manage our metal commodity, natural gas and electricity price risks. The Dodd-Frank Act Wall Street Reform and Consumer Protection Act (the “Dodd-Frank Act”) has increased regulatory oversight of OTC derivatives markets and imposed restrictions on certain derivative transactions, which could affect the use of derivatives in hedging transactions. Not all implementing regulations of the Dodd-Frank Act have been finalized. If final regulations subject us to heightened capital or margin requirements or otherwise increase our costs, directly or indirectly through costs passed on to us by our trading counterparties, of entering into OTC derivatives transactions, they could have an adverse effect on our ability to hedge risks associated with our business and on the cost of maintaining our derivative contracts.
Failure to achieve and maintain effective internal controls could adversely affect our business and stock price.
Our management is responsible for establishing and maintaining effective internal control over financial reporting. Internal control over financial reporting is a process to provide reasonable assurance regarding the reliability of financial reporting in accordance with accounting principles generally accepted in the U.S. Due to its inherent limitations, internal control over financial reporting is not intended to provide absolute assurance that we would prevent or detect a misstatement of our financial statements or fraud. While we continue to evaluate our internal controls, we cannot be certain that these measures will ensure that we implement and maintain adequate controls over our financial processes and reporting in the future. Any failure to maintain an effective system of internal control over financial reporting could limit our ability to report our financial results accurately and timely or to detect and prevent fraud. Further, we may be required to expend substantial funds and resources in order to rectify any deficiencies in our internal controls. A significant financial reporting failure or material weakness in internal control over financial reporting could cause a loss of investor and lender confidence and it could have a material adverse effect on our ability to fund our operations.

26

Table of Contents

Increasing costs of insurance may adversely impact our results of operations.
While we are insured against certain claims, including in respect of general liability, property damage (including natural disasters and fire), ocean cargo liability, equipment damage and injury to our personnel, our insurance may not cover all of the claims to which we may become subject, and future coverage of such claims may not be available on commercially reasonable terms, if at all. If we are unable to obtain adequate insurance coverage, substantial property or equipment damage, personal injury or other claims could materially impact our earnings and cash flows. Continued increases in insurance costs, additional coverage restrictions or unavailability of certain insurance products and other factors could increase our operating costs and further increase our exposure to natural disasters and other causes of catastrophic loss, as well as personal injury and other claims.
Failure to protect, or uncertainty regarding the validity, enforceability or scope of, our intellectual property rights could impair our competitive position.
Our products are covered by a variety of proprietary rights that are important to our competitive position and success. Because the intellectual property associated with our products, including Eco Brass® technology, is evolving and rapidly changing, our current intellectual property rights may not protect us adequately. We rely on a combination of patents, trademarks, trade secrets and other intellectual property rights, in addition to contractual rights, to protect the intellectual property we use in our business. However, it is possible that our intellectual property rights could be challenged, invalidated or violated. Our pending patent applications may not be granted or, if granted, the resulting patent may be challenged or invalidated by our competitors or by other third parties. Despite our efforts to protect our proprietary rights, third parties may attempt to copy or otherwise obtain and use our intellectual property without our authorization. In addition, monitoring unauthorized use of our intellectual property is difficult, and we cannot be certain the steps we take to protect our intellectual property will prevent infringement or identify all unauthorized users of our intellectual property.
Because the extent to which any new technologies will enjoy intellectual property protection is uncertain, there can be no assurance that we will be able to maintain our competitive position by enforcing intellectual property rights in the future. Furthermore, our competitors independently may develop similar or improved technologies that limit the value of our intellectual property or design around patents issued to us. If competitors or third parties are able to use our intellectual property or are able to successfully challenge, circumvent, invalidate or render unenforceable our intellectual property, we likely would lose a significant portion of our competitive advantage in the market for products covered by such intellectual property. We may not be successful in securing or maintaining proprietary or patent protection for the technology used in our products and services, and protection that is secured may be challenged and possibly lost. We may have to prosecute unauthorized uses of our intellectual property and the expense, time, delay and burden on management of such litigation could prevent us from maintaining or increasing our business. Our inability to protect our intellectual property adequately for these and other reasons could result in weakened demand for our products and services, which could result in a material adverse effect on our business, financial condition, results of operations or cash flows.
In addition, Chase Brass has entered into agreements with Mitsubishi Shindoh pursuant to which Chase Brass has access to and the right to use certain of its technologies including lead-free Eco Brass® rod and the sublicensing of lead-free Eco Brass® ingot. To the extent that Mitsubishi Shindoh faces challenges to its intellectual property rights in its technologies or fails to protect or enforce such intellectual property rights, it could have an adverse effect on our ability to market our products and / or services that incorporate those technologies or could permit competitors using infringing or similar technology to compete more effectively against us, which would result in a decline in our net sales.

27

Table of Contents

We could become subject to litigation regarding intellectual property rights, which could harm our business significantly.
Our commercial success will continue to depend in part on our ability to make and sell our products or provide our services without infringing the patents or proprietary rights of third parties. We face these risks with respect to intellectual property that we have developed internally, as well as with respect to intellectual property rights we have acquired from third parties. For example, pursuant to a license agreement, we have access to and the right to use certain technologies owned by Mitsubishi Shindoh, including our lead-free Eco Brass® rod. To the extent that Mitsubishi Shindoh fails to adequately protect the technologies upon which we rely, our competitors may be able to use such technologies or develop similar technologies independently. Recently in July 2014, a complaint was filed against Mitsubishi Shindoh alleging that, among other things, certain patents owned by Mitsubishi Shindoh (including those used in our Eco Brass® technology) are invalid and unenforceable. While we do not anticipate such litigation will have a material impact on our results of operations, there can be no assurances that a favorable outcome will be achieved, and any of the foregoing events, including an adverse result in this litigation, could lead to increased competition and negatively impact our volumes and / or margins.
Additionally, if the technologies upon which we rely infringe upon the patents or proprietary rights of third parties, we may be unable to continue using such technologies or we may face lawsuits related to our past use of these technologies. Furthermore, our competitors, who have made significant investments in competing technologies or products, may seek to apply for and obtain patents that will prevent, limit or interfere with our ability to make or sell our products or provide our services.
If we are unsuccessful in defending against any challenge to our rights to market and sell our products, our rights to use third-party technologies or to provide our services, we may, among other things, be required to:
 
pay actual damages, royalties, lost profits and / or increased damages and the third party’s attorneys’ fees, which may be substantial;
cease the development, manufacture and / or marketing of our products or services that use the intellectual property in question through a court-imposed injunction or settlement agreement;
expend significant resources to modify or redesign our products or other technology or services so that they do not infringe the intellectual property rights of others or to develop or acquire non-infringing technology, which may not be possible; or
obtain licenses to the disputed rights, which could require us to pay substantial upfront fees and future royalty payments and may not be available to us on acceptable terms, if at all.
Even if we successfully defend any infringement claims, the expense, time, delay and burden on management of litigation could prevent us from maintaining or increasing our business. Further, negative publicity could decrease demand for our products and services and cause our revenues to decline, thus harming our operating results significantly.
If we are unable to protect the confidentiality of our proprietary information and know-how, the value of our technology, products and services could be harmed significantly.
We rely on trade secrets, know-how and other proprietary information in operating our business. We seek to protect this information, in part, through the use of confidentiality agreements with employees, consultants, advisors and others who may have access to such proprietary information upon commencement of their relationships with us. These agreements require that all confidential information developed by the individual or made known to the individual by us during the course of the individual’s relationship with us be kept confidential and not disclosed to third parties. Our agreements with employees also provide that any inventions conceived by the individual in the course of rendering services to us are our exclusive property. Nonetheless, those agreements may not provide adequate protection for our trade secrets, know-how or other proprietary information and prevent their unauthorized use or disclosure. In the event of unauthorized use or disclosure of our trade secrets or proprietary information, these agreements may not provide meaningful protection, particularly for our trade secrets or other confidential information.
To the extent that consultants, key employees or other third parties apply technological information independently developed by them or by others to our proposed products, disputes may arise as to the proprietary rights to such information, which may not be resolved in our favor. The risk that other parties may breach confidentiality agreements or that our trade secrets become known or independently discovered by competitors, could harm us by enabling our competitors, who may have greater experience and financial resources, to copy or use our trade secrets and other proprietary information in the advancement of their products, methods or technologies. The disclosure of our trade secrets

28

Table of Contents

would impair our competitive position, thereby weakening demand for our products or services and harming our ability to maintain or increase our customer base.
In addition, to the extent that we do not fulfill our contractual or other obligations to adequately protect the technologies to which we have been granted access by Mitsubishi Shindoh, we could be liable for any resulting harm to its business or could lose further access to this technology, which could harm our business, operating results or financial condition.
Disruption or failures of our information technology systems could have a material adverse effect on our business.
The operation of the Company’s business depends on the Company’s information technology systems, most of which have not been updated for many years. As a result, our information technology systems are more susceptible to security breaches, operational data loss, general disruptions in functionality, and may not be compatible with new technology. We depend on our information technology systems for the effectiveness of our operations and to interface with our customers, as well as to maintain financial records and accuracy. Disruption or failures of our information technology systems or security breaches could impair our ability to effectively and timely provide our services and products and maintain our financial records, which could damage our reputation and have a material adverse effect on our business. Olin Brass began the process of implementing a fully integrated enterprise resource planning (“ERP”) system to replace its current management information systems and plans to implement the system in a phased approach over the course of the next several years. A.J. Oster is in the process of implementing an ERP system to replace its current management information systems and plans to implement by the end of fiscal 2016. These implementations may present challenges. Such challenges include, among other things, training of personnel, communication of new rules and procedures, changes in corporate culture, migration of data and the potential instability of the new system. Furthermore, large-scale system implementations are complex and time-consuming projects that are capital intensive and can span several months or even years. Certain of our business and financial processes also may require transformation in order to effectively leverage the ERP system’s benefits. The ERP system implementation may not result in the anticipated improvements and the cost of implementation may outweigh the benefits. There can be no assurance that the ERP system will be successfully implemented, and failure to do so could adversely affect our business, financial condition, results of operations and the effectiveness of our internal controls over financial reporting.
Our liquidity, financial condition and ability to operate our business could be adversely affected by the failure of financial institutions to fulfill their commitments under committed credit facilities.
The ABL Facility is an asset-based revolving loan facility with a maximum availability of $200.0 million, subject to a borrowing base calculation. We may request an increase in the maximum commitments, at our option and under certain circumstances, of up to $50.0 million (but the lenders are not obligated to grant such an increase). If one or more of the financial institutions that are lenders under the ABL Facility were to default on its obligations to provide available borrowings under the ABL Facility, such a default could have a material adverse effect on our liquidity, and we might not be able to fulfill our cash needs using other sources, which could have a material and adverse effect on our financial condition and ability to operate our business.
Global Brass and Copper Holdings, Inc. is a holding company and relies on future dividends and other payments, advances and transfers of funds from its subsidiaries to meet its financial obligations and provide cash for any dividends it might pay in the future.
Global Brass and Copper Holdings, Inc. has no direct operations and derives all of its cash flow from its subsidiaries. Because Global Brass and Copper Holdings, Inc. conducts its operations through its subsidiaries, Global Brass and Copper Holdings, Inc. depends on those entities for dividends and other payments to generate the funds necessary to meet its financial obligations, and to pay any dividends with respect to its common stock. Legal and contractual restrictions in the credit agreement governing the ABL Facility, the indenture governing the Senior Secured Notes and other debt agreements governing current and future indebtedness of Global Brass and Copper Holdings, Inc.’s subsidiaries, as well as the financial condition and operating requirements of Global Brass and Copper Holdings, Inc.’s subsidiaries, may limit the ability of Global Brass and Copper Holdings, Inc. to obtain cash from its subsidiaries. The earnings from, or other available assets of, Global Brass and Copper Holdings, Inc.’s subsidiaries may not be sufficient to pay dividends or make distributions or loans to enable Global Brass and Copper Holdings, Inc.’s to pay any dividends on our common stock. See “Risks Related to an Investment in our Common Stock—Our ability to pay regular dividends to our shareholders is subject to the discretion of our Board of Directors and may be limited by our debt agreements and limitations in Delaware law.”

29

Table of Contents

We face a number of risks related to future acquisitions and joint ventures.
We may continue to seek opportunities for further acquisitions to supplement our operations and for expansion of our international presence, particularly in Asia, through joint ventures.
Acquisitions and joint ventures involve a number of risks which could have an adverse effect on our business, financial condition, results of operations and cash flows, including the following:
 
we may experience adverse short-term effects on our operating results;
we may be unable to successfully and rapidly integrate the new businesses, personnel and products with our existing business, including financial reporting, management and information technology systems;
we may experience higher than anticipated costs of integration and unforeseen operating difficulties and expenditures, including potential disruption of our ongoing business and distraction of management;
an acquisition may be in a market or geographical area in which we have little experience and could increase the scope, geographic diversity and complexity of our operations;
the acquisition or joint venture formation process may require significant attention by our senior management and the engagement of outside advisors (and the payment of related fees), and proposed acquisitions and joint ventures may not be successfully completed;
we may lose key employees or customers of the acquired company; and
we may encounter unknown contingent liabilities that could be material.
In addition, we may require additional debt or equity financing for future acquisitions, and such financing may not be available on favorable terms, if available at all. We may not be able to successfully integrate or profitably operate any new business we acquire, and we cannot assure you that any such acquisition will meet our expectations. The process of integrating acquired operations into our existing operations may result in unforeseen operating difficulties and may require significant financial resources that would otherwise be available for the ongoing development or expansion of existing operations. Finally, in the event we decide to discontinue pursuit of a potential acquisition, we will be required to immediately expense all costs incurred in pursuit of the possible acquisition, which may have an adverse effect on our results of operations in the period in which the expense is recognized.
Certain of our operations are conducted through a joint venture which has unique risks.
Certain of our operations are conducted through our joint venture located in China. With respect to our joint venture, we may share ownership and management responsibilities with one or more partners that may not share our goals and objectives. Operating a joint venture requires us to operate the business pursuant to the terms of the agreement that we entered into with our partners, including additional organizational formalities, as well as to share information and decision making. As a result, our investments in joint ventures involve risks that are different from the risks involved in owning facilities and operations independently. These risks include the possibility that our joint ventures or our partners: have economic or business interests or goals that are or become inconsistent with our business interests or goals; are in a position to take action contrary to our instructions, requests, policies or objectives; subject the joint venture to liabilities exceeding those contemplated; take actions that reduce our return on investment; or take actions that harm our reputation or restrict our ability to run our business. Additionally, our ability to sell our interest in a joint venture may be subject to contractual and other limitations. Accordingly, any such occurrences could adversely affect our financial condition, operating results and cash flows.

30

Table of Contents

Risks Related to an Investment in Our Common Stock
Our common stock has a limited trading history, and the trading price of our common stock may be adversely affected if an active trading market in our common stock is not sustained. Our stock price may be volatile, and you may be unable to resell your shares at or above the purchase price or at all.
Our common stock began trading on the New York Stock Exchange (“NYSE”) on May 23, 2013 and as a result has a limited trading history. We cannot predict the extent to which investor interest will sustain an active trading market. The market price of our common stock will be subject to significant fluctuations in response to, among other factors, variations in our operating results and market conditions specific to our industry. If an active public market is not sustained, it may be difficult for you to sell your shares at a price that is attractive to you, or at all.
The price of our common stock may fluctuate significantly and you could lose all or part of your investment.
Our stock price may be volatile. Volatility in the market price of our common stock may prevent you from being able to sell your common stock at or above the price you paid for your common stock. The market price for our common stock could fluctuate for various reasons, including:
our operating and financial performance and prospects;
the price outlook for copper and copper-alloys;
our quarterly or annual earnings or those of other companies in our or other industries;
conditions that impact demand for our products and services;
future announcements concerning our business or our competitors’ businesses;
our results of operations that vary from those of our competitors;
shrinkage from our processing operations;
the public’s reaction to our press releases, other public announcements and filings with the SEC;
changes in earnings estimates or recommendations by securities analysts who track our common stock;
market and industry perception of our success, or lack thereof, in pursuing our growth strategy;
general market, economic and political conditions;
strategic actions by us or our competitors, such as acquisitions or restructurings;
changes in government and environmental regulation;
changes in accounting standards, policies, guidance, interpretations or principles;
arrival and departure of key personnel;
the number of shares to be publicly traded in the future;
sales of common stock by us, members of our management team or other holders;
adverse resolution of new or pending litigation against us;
business disruptions, costs and future events related to proxy contests or other shareholder activity;
any announcements by third parties of significant claims or proceedings against us;
changes in general market, economic and political conditions and their effects on global economies or financial markets, including those resulting from natural disasters, terrorist attacks, acts of war, widespread illness and responses to such events; or
any material weakness in our internal control over financial reporting.
See “Risks Related to Our Business.” These and other factors may lower the market price of our common stock, regardless of our actual operating performance. As a result, our common stock may trade at prices significantly below the price at which it was purchased.
Furthermore, in recent years the stock market has experienced significant price and volume fluctuations. This volatility has had a significant impact on the market price of securities issued by many companies, including companies in our industry. The changes frequently appear to occur without regard to the operating performance of the affected companies. Hence, the price of our common stock could fluctuate based upon factors that have little or nothing to do with us, and these fluctuations could materially reduce our share price and materially affect the value of your investment.
Future sales of shares of our common stock in the public market could cause our stock price to fall significantly even if our business is profitable.
We may issue shares of our common stock or other securities from time to time as consideration for future acquisitions or investments. If any such acquisition or investment is significant, the number of shares of our common stock, or the number or aggregate principal amount, as the case may be, of other securities that we may issue may in turn be substantial. We may

31

Table of Contents

also grant registration rights covering those shares of our common stock or other securities in connection with any such acquisitions or investments.
We cannot predict the size of future issuance of our common stock or the effect, if any, that future issuances and sales of our common stock will have on the market price of our common stock. Sales of substantial amounts of our common stock (including shares of our common stock issued in connection with an acquisition or investment), or the perception that such sales could occur, may adversely affect prevailing market prices for our common stock.
Our ability to pay regular dividends to our shareholders is subject to the discretion of our Board of Directors and may be limited by our debt agreements and limitations in Delaware law.
On November 7, 2013, we announced that our Board of Directors had approved the initiation of a quarterly dividend of $0.0375 per share of our common stock to our stockholders and the Board of Directors has declared a dividend of $0.0375 per share of common stock in every subsequent quarter to date. Any future determination to pay dividends, however, will be at the discretion of the Board of Directors and will be dependent on then-existing conditions, including our financial condition, earnings, legal requirements including limitations in Delaware law, restrictions in our debt agreements, including those governing the ABL Facility and the Senior Secured Notes, that limit our ability to pay dividends to stockholders, our strategic opportunities and other factors the Board of Directors deems relevant. The Board of Directors may, in its sole discretion, change the amount or frequency of dividends or discontinue the payment of dividends entirely. At this time, the agreement governing the ABL Facility and the indenture governing the Senior Secured Notes generally restrict or limit the payment of dividends to shareholders. The indenture governing the Senior Secured Notes includes a “restricted payments” basket based on Consolidated Net Income (as defined in the indenture). It increases based on 50% of Consolidated Net Income (as so defined) and decreases by 100% of Consolidated Net Loss (as so defined). The basket may be negative or insufficient to pay dividends. For the foregoing reasons, you will not be able to rely on dividends to receive a return on your investment. Accordingly, if you purchase shares, realization of a gain on your investment may depend on the appreciation of the price of our common stock, which may never occur.
Provisions in our charter and bylaws and provisions of Delaware law may delay or prevent our acquisition by a third party, which might diminish the value of our common stock.
The amended and restated certificate of incorporation and amended and restated bylaws of Global Brass and Copper Holdings, Inc. contain several provisions that may make it more difficult or expensive for a third party to acquire control of us without the approval of the Board of Directors. These provisions also may delay, prevent or deter a merger, acquisition, tender offer, proxy contest or other transaction that might otherwise result in our stockholders receiving a premium over the market price for their common stock. The provisions include, among others:
a prohibition on actions by written consent of the stockholders;
removal of directors only for cause;
vacancies on the Board of Directors may be filled only by the Board of Directors;
no cumulative voting;
advance notice requirements for stockholder proposals and director nominations; and
supermajority approval requirement for an amendment of the amended and restated certificate of incorporation or amended and restated bylaws.
Section 203 of the Delaware General Corporation Law may affect the ability of an “interested stockholder” to engage in certain business combinations, including mergers, consolidations or acquisitions of additional shares, for a period of three years following the time that the stockholder becomes an “interested stockholder.” An “interested stockholder” is defined to include persons owning directly or indirectly 15% or more of the outstanding voting stock of a corporation. Global Brass and Copper Holdings, Inc. has elected in its amended and restated certificate of incorporation not to be subject to Section 203 of the Delaware General Corporation Law. Nevertheless, the amended and restated certificate of incorporation contains provisions that have the same effect as Section 203 of the Delaware General Corporation Law.
The provisions of the amended and restated certificate of incorporation and amended and restated bylaws of Global Brass and Copper Holdings, Inc. and the ability of the Board of Directors to create and issue a new series of preferred stock or implement a stockholder rights plan could discourage potential takeover attempts and reduce the price that investors might be willing to pay for shares of our common stock in the future, which could reduce the market price of our common stock.

32

Table of Contents

If securities analysts do not publish research or reports about our company, or if they issue unfavorable commentary about us or our industry or downgrade our common stock, the price of our common stock could decline.
The trading market for our common stock depends in part on the research and reports that third-party securities analysts publish about our company and our industry. One or more analysts could downgrade our common stock or issue other negative commentary about our company or our industry. In addition, we may be unable or be slow to attract research coverage. Alternatively, if one or more of these analysts cease coverage of our company, we could lose visibility in the market. As a result of one or more of these factors, the trading price of our common stock could decline.
The requirements of being a public company may strain our resources, divert management’s attention and affect our ability to attract and retain qualified board members.
As a public company, we incur significant legal, accounting and other expenses that we did not incur as a private company, including costs associated with public company reporting requirements. We also have incurred and will incur costs associated with the Sarbanes-Oxley Act, the Dodd-Frank Wall Street Reform and Consumer Protection Act and related rules implemented or to be implemented by the SEC and the NYSE. The expenses incurred by public companies generally for reporting and corporate governance purposes have been increasing, and the costs we incur for such purposes may strain our resources. We expect these rules and regulations to increase our legal and financial compliance costs, divert management’s attention to ensuring compliance and to make some activities more time-consuming and costly, although we are currently unable to estimate these costs with any degree of certainty. We have hired a number of people to assist with the enhanced requirements of being a public company but may still need to hire more people for that purpose. In addition, these laws and regulations could make it more difficult or costly for us to obtain certain types of insurance, including director and officer liability insurance, and we may be forced to accept reduced policy limits and coverage or incur substantially higher costs to obtain the same or similar coverage. In addition, these laws and regulations could make it more difficult for us to attract and retain qualified persons to serve on the Board of Directors, its board committees or as its executive officers and may divert management’s attention. Furthermore, if Global Brass and Copper Holdings, Inc. is unable to satisfy its obligations as a public company, we could be subject to delisting of our common stock, fines, sanctions and other regulatory action.
Any issuance of preferred stock could make it difficult for another company to acquire us or could otherwise adversely affect holders of our common stock, which could depress the price of our common stock.
The Board of Directors has the authority to issue preferred stock and to determine the preferences, limitations and relative rights of shares of preferred stock and to fix the number of shares constituting any series and the designation of such series, without any further vote or action by its stockholders. Such preferred stock could be issued with voting, liquidation, dividend and other rights superior to the rights of common stock. The potential issuance of preferred stock may delay or prevent a change in control of Global Brass and Copper Holdings, Inc., discouraging bids for our common stock at a premium over the market price, and adversely affect the market price and the voting and other rights of the holders of our common stock.


33

Table of Contents

CAUTIONARY STATEMENT CONCERNING FORWARD-LOOKING STATEMENTS
This report contains “forward-looking statements” that involve risks and uncertainties. You can identify forward-looking statements because they contain words such as “believes,” “expects,” “projects,” “may,” “would,” “should,” “seeks,” “approximately,” “intends,” “plans,” “estimates,” “anticipates” or similar expressions that relate to our strategy, plans or intentions. All statements we make relating to our estimated and projected earnings, margins, costs, expenditures, cash flows, growth rates and financial results or to our expectations regarding future industry trends are forward-looking statements. In addition, we, through our senior management, from time to time make or may make forward-looking public statements concerning our expected future operations and performance and other developments. These forward-looking statements are subject to known and unknown risks, uncertainties and other factors that may change at any time, and, therefore, our actual results may differ materially from those that we expected. We derive many of our forward-looking statements from our operating budgets and forecasts, which are based upon many detailed assumptions. While we believe that our assumptions are reasonable, we caution that it is very difficult to predict the impact of known factors, and, of course, it is impossible for us to anticipate all factors that could affect our actual results. All forward-looking statements contained in this report are based upon information available to us on the date of this report.
Important factors that could cause actual results to differ materially from our expectations, which we refer to as “cautionary statements,” are disclosed under the “Risk Factors” section in Item 1A in this annual report on Form 10-K. All forward-looking information in this report and subsequent written and oral forward-looking statements attributable to us, or persons acting on our behalf, are expressly qualified in their entirety by the cautionary statements. Some of the factors that we believe could affect our results include, but are not limited to:
 
the impact of our substantial indebtedness, including the effect of our ability to borrow money, fund working capital and operations and make new investments;
general economic conditions affecting the markets in which our products are sold;
our ability to implement our business strategies, including acquisition activities;
our ability to continue implementing our balanced book approach to substantially reduce the impact of fluctuations in metal prices on our earnings and operating margins;
shrinkage from processing operations and metal price fluctuations, particularly copper;
the condition of various markets in which our customers operate, including the housing and commercial construction industries;
our ability to maintain business relationships with our customers on favorable terms;
the impact of a loss in customer volume or demand or a shift by customers of their manufacturing or sourcing offshore;
our ability to compete effectively with existing and new competitors;
limitations on our ability to purchase raw materials, particularly copper;
fluctuations in commodity and energy prices and costs;
our ability to maintain sufficient liquidity as commodity and energy prices rise;
the effects of industry consolidation or competition in our business lines;
operational factors affecting the ongoing commercial operations of our facilities, including technology failures, catastrophic weather-related damage, regulatory approvals, permit issues, unscheduled blackouts, outages or repairs or unanticipated changes in energy costs;
operational factors affecting the ongoing commercial operations of our facilities resulting from inclement weather conditions;
supply, demand, prices and other market conditions for our products;
our ability to accommodate increases in production to meet demand for our products;
our ability to continue our operations internationally and the risks applicable to international operations;
government regulations relating to our products and services, including new legislation relating to derivatives and the elimination of the dollar bill and EPA regulations regarding the registration and marketing of bactericidal copper products;
our ability to maintain effective internal control over financial reporting;
our ability to realize the planned cost savings and efficiency gains as part of our various initiatives;
our ability to successfully execute acquisitions and joint ventures;
workplace safety issues;
our ability to retain key employees;
adverse developments in our relationship with our employees or the future terms of our collective bargaining agreements;
rising employee medical costs;
environmental costs and our exposure to environmental claims;
our exposure to product liability claims;

34

Table of Contents

our ability to successfully manage litigation;
our ability to maintain cost-effective insurance policies;
our ability to maintain the confidentiality of our proprietary information, to protect the validity, enforceability or scope of our intellectual property rights and manage litigation regarding our intellectual property rights;
litigation regarding our intellectual property rights could affect us and harm our business;
our limited experience managing and operating as an SEC reporting company;
our ability to service our substantial indebtedness;
fluctuations in interest rates; and
restrictive covenants in our indebtedness that may adversely affect our operational flexibility.
We caution you that the foregoing list of factors may not contain all of the material factors that are important to you. In addition, in light of these risks and uncertainties, the matters referred to in the forward-looking statements contained in this report may not in fact occur. Accordingly, investors should not place undue reliance on those statements. We undertake no obligation to publicly update or revise any forward-looking statement as a result of new information, future events or otherwise, except as otherwise required by law.


35

Table of Contents

Item 1B. Unresolved Staff Comments.
None.
Item 2. Properties.
The following table summarizes our major facilities as of December 31, 2015:
Entity
 
Operation
 
Location
 
Owned or
Leased
 
Products
Corporate
 
Corporate Headquarters
 
Schaumburg, Illinois
 
Leased
 
N/A
Olin Brass segment
 
Mill Products
 
East Alton, Illinois
 
Owned (1)
 
Copper-based strip
Clad copper & copper-alloy strip
 
 
Fabricated Products
 
East Alton, Illinois
 
Owned (1)
 
Stamped & drawn copper-based parts
 
 
Fineweld Tube
 
Cuba, Missouri
 
Owned
 
Welded copper-alloy tube
 
 
Bryan Metals
 
Bryan, Ohio
 
Owned
 
Copper-based strip
 
 
 
 
 
 
 
 
Copper-based strip and foil
 
 
Somers Thin Strip
 
Waterbury, Connecticut
 
Owned
 
Stainless steel light gauge strip
 
 
Olin Luotong Metals
 
Guangzhou, China
 
Owned building; 50-year lease on land
 
Copper-based strip
 
 
Olin Brass
Headquarters
 
Louisville, Kentucky
 
Leased
 
N/A
Chase Brass segment
 
Manufacturing
 
Montpelier, Ohio
 
Owned
 
Alloy-rod
 
 
Warehouse
 
Los Angeles, California
 
Leased
 
Alloy-rod
A.J. Oster segment
 
Processing and Distribution
 
Warwick, Rhode Island
 
Leased
 
Copper-alloy strip, aluminum foil, specialty stainless steel, specialty rod and wire
 
 
Processing and Distribution
 
Alliance, Ohio
 
Owned
 
 
 
Processing and Distribution
 
Carol Stream, Illinois
 
Owned
 
 
 
Processing and Distribution
 
Yorba Linda, California
 
Leased
 
 
 
Processing and Distribution
 
Caguas, Puerto Rico
 
Owned
 
 
 
Processing and Distribution
 
Queretaro, Mexico
 
Owned
 
 
 
A.J. Oster
Headquarters
 
Warwick, Rhode Island
 
Leased
 
N/A
(1) Certain utility infrastructure at the East Alton, Illinois facility is leased by Olin Brass from Olin Corporation.
Pursuant to a 2007 transition services agreement, Olin Corporation supplies Olin Brass with natural gas, water, steam and waste water disposal, among other things, at its East Alton, Illinois facility. According to the transition services agreement, Olin Corporation has agreed to provide utility services until Olin Corporation ceases operations at its East Alton, Illinois facility, at which time Olin Brass has the option to acquire the utilities infrastructure at fair market value. The initial five-year term of the transition services agreement expired in November 2012 and automatically renews for one-year terms thereafter, subject to termination by either party upon one year’s notice. The transition services agreement renewed automatically in November 2015, and we are currently negotiating a utilities service agreement to replace the transition services agreement.
Item 3. Legal Proceedings.
We are currently and from time to time involved in a variety of claims, lawsuits and other disputes arising in the ordinary course of business, none of which management currently believes are, or will be, material to our business.
Item 4. Mine Safety Disclosures.
Not applicable.

36

Table of Contents

PART II
Item 5.     Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.
Holders of Record
Our common stock is traded on the New York Stock Exchange (ticker symbol BRSS). As of February 24, 2016, the number of holders of record of our common stock was approximately 80.
Market Information for Common Stock
The high and low selling prices per share of our common stock, as well as the cash dividend declared per share of our common stock, for the quarters during 2015 and 2014 were as follows:
 
 
2015
 
First
Quarter
 
Second Quarter
 
Third Quarter
 
Fourth Quarter
High
$15.94
  
$18.90
  
$21.43
  
$24.05
Low
12.30
  
14.46
  
15.96
  
19.88
Cash dividends declared
0.0375
  
0.0375
  
0.0375
  
0.0375
 
 
 
 
 
 
 
 
 
2014
 
First
Quarter
 
Second Quarter
 
Third Quarter
 
Fourth Quarter
High
$18.13
  
$17.30
  
$17.41
  
$14.73
Low
15.04
  
14.31
  
14.45
  
11.49
Cash dividends declared
0.0375
  
0.0375
  
0.0375
  
0.0375
For certain information regarding our equity compensation plans, see Part III—Item 12, “Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters.”
Dividends
Both the ABL Facility and the indenture governing the Senior Secured Notes contain restrictions as to the payment of dividends. See Note 11, “Financing,” of our audited consolidated financial statements, which are included elsewhere in this annual report, for further discussion of these restrictive covenants.
Issuer Purchases of Equity Securities
None.


37

Table of Contents


Performance Graph

This performance graph shall not be deemed “soliciting material” or to be “filed” with the SEC for purposes of Section 18 of the Securities Exchange Act of 1934, as amended (Exchange Act), or otherwise subject to the liabilities under that Section, and shall not be deemed to be incorporated by reference into any filing of Global Brass and Copper Holdings, Inc. under the Securities Act of 1933, as amended, or the Exchange Act.

The following graph shows a comparison from May 23, 2013 (the date our common stock commenced trading on the New York Stock Exchange) through December 31, 2015 of the cumulative total return for our common stock, the Russell 2000 Index (“Total Market Index”) and the S&P SmallCap 600 Index—Materials (“Materials Index”). The graph assumes that $100 was invested at the market close on May 23, 2013 in the common stock of Global Brass and Copper Holdings, Inc., the Total Market Index and the Materials Index and data assumes reinvestments of dividends. The stock price performance of the following graph is not necessarily indicative of future stock price performance.
 

38

Table of Contents

Item 6. Selected Financial Data.
Set forth below is selected historical consolidated financial data of our business as of the dates and for the periods indicated. The selected historical consolidated financial data for the years ended December 31, 2015, 2014 and 2013 and as of December 31, 2015 and 2014 have been derived from our audited consolidated financial statements included elsewhere in this annual report. The selected historical consolidated financial data as of December 31, 2013, 2012 and 2011 and for the years ended December 31, 2012 and 2011 have been derived from our audited consolidated financial statements not included in this annual report.
The selected historical consolidated financial data should be read in conjunction with the information about the limitations on comparability of our financial results, including as a result of acquisitions. See Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” Item 1A, “Risk Factors,” and our consolidated financial statements and related notes included in Item 8 to this annual report. 
(in millions, except per share data)
Year Ended December 31,
 
2015
 
2014
 
2013
 
2012
 
2011
Statements of Operations Data:
 
 
 
 
 
 
 
 
 
Net sales
$
1,506.2

 
$
1,711.4

 
$
1,758.5

 
$
1,650.5

 
$
1,779.1

Cost of sales
(1,335.9
)
 
(1,546.8
)
 
(1,576.2
)
 
(1,467.3
)
 
(1,583.5
)
Gross profit
170.3

 
164.6

 
182.3

 
183.2

 
195.6

Selling, general and administrative expenses (1)
(83.2
)
 
(76.9
)
 
(110.8
)
 
(92.7
)
 
(69.4
)
Operating income
87.1

 
87.7

 
71.5

 
90.5

 
126.2

Interest expense
(39.1
)
 
(39.6
)
 
(39.8
)
 
(39.7
)
 
(40.0
)
Loss on extinguishment of debt
(3.1
)
 

 

 
(19.6
)
 

Gain on sale of investment in joint venture
6.3

 

 

 

 

Other income (expense), net
0.2

 
(0.5
)
 
(0.3
)
 
(0.1
)
 
(0.4
)
Income before provision for income taxes and equity income
51.4

 
47.6

 
31.4

 
31.1

 
85.8

Provision for income taxes
(15.9
)
 
(16.6
)
 
(22.2
)
 
(19.2
)
 
(31.4
)
Income before equity income
35.5

 
31.0

 
9.2

 
11.9

 
54.4

Equity income, net of tax
0.3

 
1.1

 
1.5

 
1.0

 
0.9

Net income
35.8

 
32.1

 
10.7

 
12.9

 
55.3

Net income attributable to noncontrolling interest
(0.2
)
 
(0.4
)
 
(0.3
)
 
(0.4
)
 
(0.2
)
Net income attributable to Global Brass and Copper Holdings, Inc.
$
35.6

 
$
31.7

 
$
10.4

 
$
12.5

 
$
55.1

Per Share Data:
 
 
 
 
 
 
 
 
 
Cash dividends declared per common share (2)
$
0.1500

 
$
0.1500

 
$
0.0375

 
$
7.5793

 
$

Basic net income attributable to Global Brass and Copper Holdings, Inc. per common share
$
1.67

 
$
1.50

 
$
0.49

 
$
0.59

 
$
2.61

Diluted net income attributable to Global Brass and Copper Holdings, Inc. per common share
$
1.66

 
$
1.49

 
$
0.49

 
$
0.59

 
$
2.61

Number of common shares used in basic per share calculations
21.3

 
21.2

 
21.1

 
21.1

 
21.1

Number of common shares used in diluted per share calculations
21.4

 
21.3

 
21.2

 
21.1

 
21.1

Balance Sheet Data:
 
 
 
 
 
 
 
 
 
Cash
$
83.5

 
$
44.6

 
$
10.8

 
$
13.9

 
$
49.5

Total assets (3)
557.2

 
566.3

 
537.7

 
490.3

 
538.2

Total debt (3) (4)
343.1

 
371.4

 
369.5

 
377.1

 
293.1

Total liabilities (3)
496.5

 
540.3

 
541.1

 
538.1

 
455.5

Total equity (deficit)
60.7

 
26.0

 
(3.4
)
 
(47.8
)
 
82.7

(1)
For the years ended December 31, 2013, 2012 and 2011, includes non-cash profits interest compensation expense of $29.3 million, $19.5 million and $0.9 million, respectively. No non-cash profits interest compensation expense was recorded in 2015 or 2014.
(2)
In 2015, 2014 and 2013, the Company declared dividends of $3.2 million, $3.2 million and $0.8 million, respectively, to the Company’s stockholders. In 2012, the Company used a portion of the net proceeds from the issuance of senior secured notes to pay a $160.0 million distribution to Halkos, the sole stockholder of the Company prior to the Company’s initial public offering in May 2013.
(3)
As discussed in Note 2, “Summary of Significant Accounting Policies,” we early adopted ASU 2015-3 and ASU 2015-17 and applied the new guidance retrospectively to 2014, 2013, 2012 and 2011 to conform to the fiscal 2015 presentation.
(4)
Consists of long-term debt, capital lease obligations, current maturities of long-term debt presented net of deferred financing fees incurred in connection with the issuance of debt.

39

Table of Contents

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.
Readers should refer to the information presented under the caption “Risk Factors” for risk factors that may affect our future performance. The following discussion and analysis of financial condition and results of operations should be read in conjunction with “Selected Financial Data” and our consolidated financial statements and related notes included elsewhere in this annual report. In addition to historical data, this discussion contains forward-looking statements about our business, operations and financial performance based on current expectations that involve risks, uncertainties and assumptions. Our actual results may differ materially from those discussed in the forward-looking statements as a result of various factors, including but not limited to those discussed in the sections entitled “Risk Factors” and “Cautionary Statements Concerning Forward-Looking Statements” included elsewhere in this annual report.
Overview
Our Company
Global Brass and Copper Holdings, Inc. (“Holdings,” the “Company,” “we,” “us,” or “our”) was incorporated in Delaware on October 10, 2007. Holdings, through its wholly-owned principal operating subsidiary, Global Brass and Copper, Inc. (“GBC”), commenced commercial operations on November 19, 2007 through the acquisition of the metals business from Olin Corporation. The majority of our operations are managed through three reportable operating segments: Olin Brass, Chase Brass and A.J. Oster. We also have a Corporate entity which includes certain administrative costs and expenses and the elimination of intercompany balances.
We are a leading value-added converter, fabricator, processor and distributor of specialized non-ferrous products including a wide range of sheet, strip, foil, rod, tube and fabricated metal component products. While we primarily process copper and copper-alloys, we also reroll and form certain other metals such as stainless steel, carbon steel and aluminum. Using processed scrap, virgin metals and other refined metals, we engage in metal melting and casting, rolling, drawing, extruding, welding and stamping to fabricate finished and semi-finished alloy products. Key attributes of copper and copper alloys are conductivity, corrosion resistance, strength, malleability, cosmetic appearance and bactericidal properties.
Our products are used in a variety of applications across diversified markets, including the building and housing, munitions, automotive, transportation, coinage, electronics / electrical components, industrial machinery and equipment and general consumer markets. We access these markets through direct mill sales, our captive distribution network and third-party distributors. We hold the exclusive production and distribution rights in North America for a lead-free brass rod product, which we sell under the Green Dot® and Eco Brass® brand names. The vertical integration of Olin Brass’s manufacturing capabilities and A.J. Oster’s distribution capabilities allows us to access customers with a wide variety of volume and service needs.
We service nearly 1,600 customers in 23 countries across four continents. We employ approximately 1,900 people and operate 11 manufacturing facilities and distribution centers across the United States (“U.S.”), Puerto Rico and Mexico.
We own 80% of a value-added service center in Guangzhou, China (“Olin Luotong Metals” or “OLM”); the other 20% is owned by Chinalco Luoyang Copper Co. Ltd. (“Chinalco”). Through Olin Luotong Metals, together with our sales offices in China and Singapore, we supply our products in China and throughout Asia.
Unlike traditional metals companies, in particular those that engage in mining, smelting and refining activities, we are purely a metal converter, fabricator, processor and distributor, and we do not attempt to generate profits from fluctuations in metal prices. Our financial performance is primarily driven by metal conversion economics, not by the underlying movements in the price of copper and the other metals we use. Through our “balanced book” approach, we strive to match the timing, quantity and price of our metal sales with the timing, quantity and price of our replacement metal purchases. This practice, along with our toll processing operations, substantially reduces the financial impact of metal price movements on our earnings and operating margins.
Our Operating Segments
We operate through three reportable operating segments: Olin Brass, Chase Brass and A.J. Oster.
Our Olin Brass segment is the leading manufacturer, fabricator and converter of specialized copper and brass sheet, strip, foil, tube and fabricated components in North America. While primarily processing copper and copper-alloys, the segment also rerolls and forms other metals such as stainless steel, carbon steel and aluminum. Olin Brass’s products are used in

40

Table of Contents

five primary markets: munitions, coinage, automotive, building and housing and electronics / electrical components. In 2015, Olin Brass sold approximately 16% of its domestic copper-based products to A.J. Oster.
Chase Brass is a leading manufacturer of brass rod in North America. Chase Brass primarily manufactures brass rod, including round and other shapes, ranging from 1/4 inch to 4.5 inches in diameter. The key attributes of brass rod include its machinability, corrosion resistance and moderate strength, making it especially suitable for forging and machining products such as valves and fittings. Brass rod is generally manufactured from copper or copper-alloy scrap. Chase Brass produces brass rod used in production applications which can be grouped into four primary markets: building and housing, transportation, electronics / electrical components and industrial machinery and equipment.
A.J. Oster is a processor and distributor primarily of copper and copper-alloy sheet, strip and foil. A.J. Oster operates six strategically-located service centers in the United States, Puerto Rico and Mexico. Each A.J. Oster service center reliably provides a broad range of high quality products at quick lead-times in small quantities. These capabilities, combined with A.J. Oster’s operations of precision slitting, hot tinning, traverse winding, cutting, edging, stamping and special packaging, provide value to a broad customer base. A.J. Oster’s products are used in three primary markets: building and housing, automotive and electronics / electrical components. In 2015, 55% of A.J. Oster’s brass and copper material requirements were supplied by our Olin Brass segment.
All three segments generate revenue from product sales and earn a premium margin over the cost of metal as a result of our metal conversion, value-added processing, and service capabilities.
Corporate and other includes compensation for corporate executives and officers, corporate office and administrative salaries, and professional fees for accounting, tax and legal services. Corporate and other also includes interest expense, state and Federal income taxes, overhead costs that management has not allocated to the operating segments, share-based compensation expense, costs related to other long-term incentive programs and the elimination of intercompany balances.
Formation and Acquisition of the Worldwide Metals Business of Olin Corporation
On October 10, 2007, the Company was formed by affiliates of KPS Capital Partners, L.P. (“KPS”) as an acquisition vehicle to acquire the worldwide metals business of Olin Corporation, which was completed on November 19, 2007. The transaction was accounted for under the purchase method of accounting, and the assets and liabilities of the business were recorded at fair value at the acquisition date.
In accordance with accounting principles generally accepted in the United States of America (“US GAAP”) at the time of the transaction, the fair market value of the net assets acquired exceeded the purchase price in the acquisition. This resulted in a bargain purchase, and we reduced the value of all identified intangible assets and other noncurrent assets, including the acquired property, plant and equipment, to zero in the opening balance sheet as of the acquisition date. Accordingly, our fixed assets reflect only post-acquisition capital investments, and our cost of sales and selling, general and administrative expense, depending on the nature and use of the underlying asset, includes depreciation only on capital investments made after the acquisition date.
Recent Transactions
Purchases of Senior Secured Notes
In 2015, we purchased in the open market an aggregate of $29.7 million principal amount of our 9.50% senior secured notes due 2019 (“Senior Secured Notes”) for an aggregate purchase price of $32.2 million, plus accrued interest. As a result of these purchases, we recognized a loss on the extinguishment of debt of $3.1 million, which includes a premium of $2.5 million and the write-off of $0.6 million of unamortized debt issuance costs.
Disposition of Joint Venture
In April 2015, we sold our 50% share of the Dowa Olin Metal Corporation (the “Dowa Joint Venture”) to DOWA Metaltech Co. Ltd. (“Dowa Co.”) for $8.0 million. Thus, we no longer own any portion of the Dowa Joint Venture. During 2015, we recognized a gain of $6.3 million and related tax expense of $1.5 million on the sale.

41

Table of Contents

Key Factors Affecting Our Results of Operations
LIFO Accounting
The metals component of inventories that is valued on last-in, first-out (“LIFO”) basis comprises approximately 70% of total inventory at December 31, 2015 and 2014, respectively. The impact of LIFO accounting on our financial results may be significant with respect to period-to-period comparisons depending on the fluctuations in our inventory levels. During 2015, 2014 and 2013, certain domestic metal inventory quantities were reduced, resulting in a liquidation of LIFO inventory layers. The effect of this reduction increased cost of sales by $0.1 million and $0.6 million in 2015 and 2014, respectively, and decreased cost of sales by $2.0 million in 2013.
Metal Cost
We are a leading, value-added converter, fabricator, processor and distributor of specialized non-ferrous products in North America. Our profitability is primarily driven by the value added from the manufacturing and fabrication of metal products, and not by fluctuations in the price of copper and other metals. Our business model uses various methods to substantially reduce the financial impact of fluctuations in metal prices, such that our operating margins are largely unaffected by metal price trends. Nevertheless, metal price fluctuations will impact the total amount of our net sales, the cost of shrinkage loss, the impact of LIFO (as previously discussed) liquidations and our working capital requirements.
Shrinkage loss, which is primarily the loss of metal that occurs in the melting and casting operations, is an inherent part of our metal casting process. While the shrinkage loss rate is very low relative to the total volume of metal casting, the cost of the shrinkage loss and its impact on financial performance increases as metal prices increase.
Over the last three years, approximately 25% of our sales volumes were made on a toll basis where our customers supply us with the metal and we charge them a processing or conversion fee to melt the metal and convert it into a finished product. For metal processed on a non-toll basis, we procure and own the metal until we sell it to the customer, whereby we charge them not only a conversion fee but also a metal replacement fee. For sales on a non-toll basis, we use our balanced book approach, discussed below, to substantially reduce the impact of metal price movements on earnings and operating margins.
Metal prices also impact our investment in working capital because our collection terms with our customers are longer than our payment terms to our suppliers, so when metal prices increase, even if the number of pounds processed does not change, our working capital requirements will also increase. As a result, when metal prices are rising, we tend to draw more on our asset-based revolving loan facility (the “ABL Facility”) to cover the cash flow delay between material replacement purchase and cash collection. When metal prices fall, we replace our metal at a lower cost than the metal content of cash collections and generally reduce our use of the ABL Facility. We believe that our cash flow from operations, supplemented with cash available under the ABL Facility, will provide sufficient liquidity to meet our needs for the foreseeable future.
Balanced Book
The majority of our sales volume is from non-toll customers. To substantially reduce the financial impact of metal price volatility on earnings and operating margins on these non-toll sales, we use a balanced book approach to hedge the impact of metal price fluctuations. The balanced book approach minimizes the financial impact of metal price movements in the period between date of order and date of shipment by matching the timing, quantity and price of the metal cost recovery component of net sales made on a non-toll basis with the timing, quantity and price of the replacement metal purchases. For any non-toll sale we seek to achieve our balanced book through one of the following three mechanisms:
Metal sales and replacement purchases on “price date of shipment” terms, meaning that metal sale prices and the metal replacement prices are set on the date of shipment. The customer bears the risk of metal price changes from the date of order to the date of shipment, so all fluctuations in metal costs are passed through to the customer.
Metal sales and replacement purchases on a “firm price basis,” meaning that metal sale prices are fixed on the order date, and a matching replacement purchase at a fixed price is established with a metal supplier. The supplier therefore bears the risk of metal price changes from the date of order to the date of shipment.
Metal sales on a firm price basis in circumstances where a matching firm price replacement purchase is unavailable. In this situation, we execute a forward purchase on “price date of shipment” terms and enter into a financial derivative transaction in the form of a forward purchase contract. The impact of price changes from date of order to the date of shipment on the previously required metal replacement purchase is offset by gains or losses on the derivative contract. The derivative counterparty bears the risk of metal price changes from the date of order to the date of shipment.

42

Table of Contents

In 2015, approximately 63% of our non-toll unit sales volumes were conducted with price date of shipment terms. All other non-toll unit sales volumes were conducted with firm price replacement purchases or price date of shipment replacement purchases plus a derivative contract.
Metal Derivatives
As discussed above, we use derivative contracts in support of our balanced book approach. These derivative contracts are not designated as hedges for accounting purposes and are recorded at fair value in accordance with the Financial Accounting Standards Board (“FASB”) Accounting Standards Codification (“ASC”) 820, Fair Value Measurements and Disclosures (“ASC 820”). Thus, we include the unrealized and realized gains and losses on these derivatives within cost of sales in our consolidated statements of operations.
Industry Dynamics and Demand for Our Products
Demand for our product is driven predominantly by six markets: 1) building and housing, 2) munitions, 3) automotive, 4) electronics / electrical components, 5) coinage and 6) industrial machinery and equipment.
Building and Housing
According to management estimates, we expect U.S. housing starts and U.S. existing home sales to increase 9.2% and 1.2% annually, respectively, from 2015 through 2018.
We also expect continued growth for lead-free plumbing products in our green portfolio products, including Eco Brass®.
While demand within this market is affected by new residential housing, existing home sales and commercial construction, all of which are significantly dependent on overall economic conditions, the correlation between housing statistics and our sales is not entirely direct. Our key products are typically installed near the completion of construction, meaning there is an inherent lag time compared to housing starts, and sales of our building and housing products can be affected by factors such as housing mix (unit size, unit price point and the mix of multi-family versus single-family construction). Sales of our products can also be impacted by changes in the composition of materials and fixtures used in construction.
Munitions
In 2014, our customers began destocking their munitions inventories and thus, Olin Brass’s munitions volumes decreased in 2015 as these efforts continued. As we move into 2016, we anticipate a 10% to 15% decrease from the average annual munitions volumes in the 2012-2014 periods and a longer-term normalized run rate that is approximately 10% below these average annual volumes.
We remain focused on managing the factors within our control from a volume standpoint and we are encouraged by the continued improvements in quality and on-time performance at Olin Brass.
Automotive
The automotive market is dependent on the level of consumer spending on automobiles, which is significantly dependent on overall economic conditions, replacement needs, as well as the amount of electrical components contained within automobiles. According to management estimates, North American light vehicle production is expected to grow by 2.1% annually from 2015 through 2018.
We continue to experience the positive effect of slow and steady improvement in this market across our business. Within Olin Brass, the growth is slightly offset by lower volume as a result of pricing strategies which position us better for the long-term. These strategies focus on pricing our products to earn a return commensurate with cost complexity required to produce them and to price for an appropriate return on the assets used to produce them.
Electronics / Electrical Components
Customers use our products to manufacture electronics / electrical components in a wide range of applications, from medical devices to computers to aviation components, and demand is largely correlated to general economic activity and technological developments.

43

Table of Contents

Coinage
Olin Brass renewed a long-term contract with the U.S. Mint in 2012 to extend the supply agreement through 2017. Demand for coinage is directly tied to consumer transactions and coinage demand has improved in the last three years as a result of an overall increase in demand, as well as due to the U.S. Mint replenishing coin inventories which had become too low.
Industrial Machinery and Equipment (“IM&E”)
Sales in this market primarily lie within Chase Brass. IM&E volumes were down in 2015 as compared to 2014 due to softness in the oil and gas, metals and mining, and agricultural industries and the increased imports resulting from unfavorable exchange rate movements of the U.S. dollar. We anticipate continued weakness in this market segment as we move into 2016.
Industry Dynamics Affecting Growth Opportunities
Regarding demand for copper and copper-alloy sheet, strip and plate (“SSP”), while volumes have decreased in the munitions market, we are encouraged by the continued increase in automotive shipments. Further, there are a number of growth opportunities that could increase the demand for SSP products, including our CuVerro® bactericidal products. Olin Brass completed the Federal and state registration processes necessary to market its CuVerro® materials as having bactericidal properties. It has also registered more than 20 component manufacturers to market products made with CuVerro®.
Legislation to replace the one dollar notes with dollar coins keeps receiving attention in Congress, most recently by the reintroduction of the Unified Savings and Accountability Act (“USA Act”) in July 2015. Among other matters, the USA Act brings added focus and support to replace the one dollar note with the dollar coin. We anticipate a significant increase in the size of the coinage market if the U.S. transitions to the dollar coin and eliminates the dollar note.
Regarding demand for brass rod, we anticipate growth influenced by increasing demand from the building and construction market and our green product portfolio resulting from recent legislation mandating the use of lead-free and low-lead water pathways in all drinking water plumbing devices sold after January 2014.
Finally, the North American market may be affected by certain factors related to the supply of brass and copper, including imported rod and parts, from offshore manufacturers, and therefore competition from offshore suppliers could become more significant in the future. Historically these factors have included foreign trade agreements, antidumping orders, foreign exchange rate fluctuations, domestic capacity and pricing levels, as well as costs in the import supply chain.

44

Table of Contents

Changes in Certain GAAP and Non-GAAP Measures
In addition to the results reported in accordance with US GAAP, we also report “adjusted sales,” “adjusted gross profit,” “adjusted selling, general and administrative expenses,” “adjusted EBITDA” and “adjusted diluted earnings per common share” which are non-GAAP financial measures as defined below.
Adjusted sales may not be comparable to similarly titled measures presented by other companies and is not a measure of operating performance or liquidity defined by US GAAP. Adjusted gross profit and adjusted selling, general and administrative expenses adjust for the items within each category that are excluded from the calculation of Adjusted EBITDA. Adjusted gross profit and adjusted selling, general and administrative expenses may not be comparable to similarly titled measures presented by other companies and are not measures of operating performance or liquidity defined by US GAAP. Adjusted EBITDA is not intended as an alternative to net income or as an alternative to any other measure of performance in conformity with US GAAP or as an alternative to cash flow provided by (used in) operating activities as a measure of liquidity. Adjusted diluted earnings per common share may not be comparable to similarly titled measures presented by other companies and is not a measure of operating performance or liquidity defined by US GAAP.
You should therefore not place undue reliance on adjusted sales, adjusted gross profit, adjusted selling, general and administrative expenses, adjusted EBITDA, adjusted diluted earnings per common share, or any ratios calculated using them. The most comparable US GAAP-based measure for each respective non-GAAP financial measure can be found in our consolidated financial statements and the related notes thereto included elsewhere in this report.
Adjusted sales
Adjusted sales is defined as net sales less the metal cost of products sold. Net sales is the most directly comparable US GAAP measure to adjusted sales, which represents the value-added premium we earn over our conversion and fabrication costs. We use adjusted sales on a consolidated basis to monitor the revenues that are generated from our value-added conversion and fabrication processes excluding the effects of fluctuations in metal costs. We believe that adjusted sales supplements our US GAAP results to provide a more complete understanding of the results of our business, and we believe it is useful to our investors and other parties for these same reasons.
Adjusted sales were determined as follows:
 
Year Ended
December 31,
 
Change:
2015 vs. 2014
 
Change:
2014 vs. 2013
(in millions, except per pound values)
2015
 
2014
 
2013
 
Amount
 
Percent
 
Amount
 
Percent
Pounds shipped (a)
511.9

 
520.4

 
523.0

 
(8.5
)
 
(1.6
)%
 
(2.6
)
 
(0.5
)%
Net sales
$
1,506.2

 
$
1,711.4

 
$
1,758.5

 
$
(205.2
)
 
(12.0
)%
 
$
(47.1
)
 
(2.7
)%
Metal component of net sales
(971.9
)
 
(1,168.8
)
 
(1,209.2
)
 
196.9

 
(16.8
)%
 
40.4

 
(3.3
)%
Adjusted sales
$
534.3

 
$
542.6

 
$
549.3

 
$
(8.3
)
 
(1.5
)%
 
$
(6.7
)
 
(1.2
)%
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Net sales per pound
$
2.94

 
$
3.29

 
$
3.36

 
$
(0.35
)
 
(10.6
)%
 
$
(0.07
)
 
(2.1
)%
Metal component of net sales per pound
(1.90
)
 
(2.25
)
 
(2.31
)
 
0.35

 
(15.6
)%
 
0.06

 
(2.6
)%
Adjusted sales per pound
$
1.04

 
$
1.04

 
$
1.05

 
$

 
 %
 
$
(0.01
)
 
(1.0
)%
Average copper price per pound (b)
$
2.51

 
$
3.12

 
$
3.34

 
$
(0.61
)
 
(19.6
)%
 
$
(0.22
)
 
(6.6
)%
(a)Amounts exclude quantity of unprocessed metal sold.
(b)Copper prices reported by the Commodity Exchange (“COMEX”).
Net sales decreased by $205.2 million, or 12.0%, in 2015 compared to 2014. The decline was primarily due to decreased metal prices ($133.0 million) and a decline in sales of unprocessed metal ($56.9 million). Adjusted sales decreased by $8.3 million, primarily due to lower volume.
Volume decreased by 8.5 million pounds, or 1.6%, in 2015 compared to 2014, due primarily to decreases within our munitions channel partially offset by increased demand in the coinage market.
Net sales decreased by $47.1 million, or 2.7%, in 2014 compared to 2013, as a result of a $40.4 million decline in the metal cost recovery component, predominantly due to lower metal prices ($41.6 million) and lower sales of unprocessed metals ($1.5 million). Adjusted sales decreased by $6.7 million, due to a $5.0 million decrease from lower volume and a $1.7 million from the net effect of changes in product mix and increases in average selling prices.

45

Table of Contents

Volume decreased by 2.6 million pounds, or 0.5%, in 2014 compared to 2013, predominately due to lower demand in the electronics / electrical components market resulting primarily from a customer sourcing their finished products offshore, which negatively impacted demand for brass rod in this market. Additionally, volume in the munitions market was lower as the result of destocking throughout the supply chain and reduced demand following an unprecedented peak in demand in 2013. The decrease in volume was partially offset by higher demand in the building and housing, automotive, coinage and transportation markets.
Adjusted gross profit
Adjusted gross profit is defined as gross profit less items excluded from the calculation of adjusted EBITDA. Gross profit is the most directly comparable US GAAP measure to adjusted gross profit. We believe that adjusted gross profit supplements our US GAAP results to provide a more complete understanding of the results of our business, and we believe it is useful to our investors and other parties for these same reasons. We believe adjusted gross profit represents a meaningful presentation of the financial performance of our core operations, in order to provide period-to-period comparisons that are more consistent and more easily understood.
Adjusted gross profit was determined as follows:
 
Year Ended
December 31,
 
Amount change:
(in millions)
2015
 
2014
 
2013
 
2015 vs. 2014
 
2014 vs. 2013
Total gross profit
$
170.3

 
$
164.6

 
$
182.3

 
$
5.7

 
$
(17.7
)
Unrealized (gain) loss on derivative contracts (a)
(0.6
)
 
3.0

 
(0.2
)
 
(3.6
)
 
3.2

LIFO liquidation (loss) gain
0.1

 
0.6

 
(2.0
)
 
(0.5
)
 
2.6

Lower of cost or market adjustment to inventory (b)
6.6

 
0.2

 
0.3

 
6.4

 
(0.1
)
Restructuring and other business transformation charges
0.4

 
0.1

 

 
0.3

 
0.1

Depreciation expense
12.0

 
10.2

 
7.6

 
1.8

 
2.6

Adjusted gross profit
$
188.8

 
$
178.7

 
$
188.0

 
$
10.1

 
$
(9.3
)
(a)
We use our balanced book approach, supported, where required, by derivative contracts, to substantially reduce the impact of metal price fluctuations on operating margins. We also use derivative contracts to reduce uncertainty and volatility related to energy and utility costs.
(b)
During 2015, 2014 and 2013, we reduced the recorded value of certain domestic, non-copper metal inventory by $6.6 million, $0.2 million, and $0.3 million, respectively, resulting from the decline in market value of these metals.
Gross profit increased by $5.7 million, or 3.5%, in 2015 compared to 2014 primarily due to increased production yields and productivity improvements. Adjusted gross profit increased by $10.1 million, predominantly due to the aforementioned yield and productivity improvements.
Gross profit decreased by $17.7 million, or 9.7%, in 2014 compared to 2013 predominantly due to higher manufacturing conversion costs of $8.4 million, primarily due to inclement weather in the first quarter of 2014 and operational issues that continued into the first half of 2014 which adversely impacted product flow and yield at Olin Brass. Adjusted gross profit decreased by $9.3 million primarily due to the aforementioned higher manufacturing conversion costs.
Adjusted selling, general and administrative expenses
Adjusted selling, general and administrative expenses is defined as selling, general and administrative expenses less items excluded from the calculation of adjusted EBITDA. Selling, general and administrative expenses are the most directly comparable US GAAP measure to adjusted selling, general and administrative expenses. We believe that adjusted selling, general and administrative expenses supplements our US GAAP results to provide a more complete understanding of the results of our business, and we believe it is useful to our investors and other parties for these same reasons. We believe adjusted selling, general and administrative expenses represent a meaningful presentation of the financial performance of our core operations, in order to provide period-to-period comparisons that are more consistent and more easily understood.

46

Table of Contents

Adjusted selling, general and administrative expenses were determined as follows:
 
Year Ended
December 31,
 
Amount change:
(in millions)
2015
 
2014
 
2013
 
2015 vs. 2014
 
2014 vs. 2013
Total selling, general and administrative expenses
$
83.2

 
$
76.9

 
$
110.8

 
$
6.3

 
$
(33.9
)
Specified legal / professional expenses
(2.8
)
 
(4.3
)
 
(4.3
)
 
1.5

 

Share-based compensation expense
(4.2
)
 
(1.7
)
 
(1.2
)
 
(2.5
)
 
(0.5
)
Restructuring and other business transformation charges
(0.5
)
 
(0.3
)
 

 
(0.2
)
 
(0.3
)
Non-cash Halkos profits interest compensation expense (a)

 

 
(29.3
)
 

 
29.3

Management fees (b)

 

 
(4.8
)
 

 
4.8

Depreciation and amortization expense
(1.6
)
 
(2.1
)
 
(1.0
)
 
0.5

 
(1.1
)
Adjusted selling, general and administrative expenses
$
74.1

 
$
68.5

 
$
70.2

 
$
5.6

 
$
(1.7
)
(a)
Includes $20.4 million that represents incremental non-cash compensation as a result of the modification made to the Halkos Holdings, LLC Executive Equity Incentive Plan to eliminate Halkos’ right to acquire all or a portion of the non-voting membership interests granted to certain members of management. The 2013 amount also includes $8.9 million that represents dividend payments made by Halkos to members of our management that resulted in a non-cash compensation charge in connection with the IPO that occurred in May 2013.
(b)
Includes a $4.5 million early termination fee, which is equal to the value of the advisory fee that would have otherwise been payable to affiliates of KPS through the end of the agreement.
Selling, general and administrative expenses increased by $6.3 million, or 8.2%, in 2015 compared to 2014 primarily due to higher incentive compensation achievement. Adjusted selling, general and administrative expenses increased by $5.6 million, again due to the aforementioned incentive compensation fluctuations.
Selling, general and administrative expenses decreased by $33.9 million, or 30.6%, in 2014 compared to 2013 primarily due to non-cash compensation expense and the early termination fee paid to affiliates of KPS. Adjusted selling, general and administrative expenses decreased by $1.7 million predominantly due to decreased employee compensation and related costs.
Adjusted EBITDA
Adjusted EBITDA is earnings before interest, taxes, depreciation and amortization (“EBITDA”) adjusted to exclude the following:
unrealized gains and losses on derivative contracts in support of our balanced book approach;
unrealized gains and losses associated with derivative contracts related to energy and utility costs;
non-cash losses due to lower of cost or market adjustments to inventory;
non-cash gains and losses due to the depletion of a LIFO layer of metal inventory;
non-cash profits interest compensation expense related to payments made to certain members of our management by Halkos Holdings, LLC (“Halkos”), the sole stockholder of the Company prior to the initial public offering;
share-based compensation expense;
loss on extinguishment of debt;
non-cash income accretion related to the Dowa Joint Venture;
management fees paid to affiliates of KPS;
restructuring and other business transformation charges;
specified legal and professional expenses; and
certain other items.
We believe adjusted EBITDA represents a meaningful presentation of the financial performance of our core operations, in order to provide period-to-period comparisons that are more consistent and more easily understood. We also believe it is an important supplemental measure that is frequently used by securities analysts, investors and other interested parties in the evaluation of companies in our industry.
Adjusted EBITDA is the key metric used by our Chief Operating Decision Maker to evaluate the segment performance in a way that we believe reflects our core operating performance, and in turn, incentivize members of management and certain employees. For example, we use adjusted EBITDA per pound in order to measure the effectiveness of the balanced book approach in reducing the financial impact of metal price volatility on earnings and operating margins, and to measure the

47

Table of Contents

effectiveness of our business transformation initiatives in improving earnings and operating margins. In addition, measures similar to adjusted EBITDA are defined and used in the agreements governing our ABL Facility and our Senior Secured Notes to determine compliance with various financial covenants and tests.
However, our adjusted EBITDA may not be comparable to similarly titled measures presented by other companies. In addition, it has limitations as an analytical tool, and you should not consider it in isolation or as a substitute for analysis of our results as reported under US GAAP. Some of these limitations are that adjusted EBITDA:
 
does not reflect every expenditure, future requirements for capital expenditures or contractual commitments;
does not reflect the significant interest expense or the amounts necessary to service interest or principal payments on our debt;
does not reflect income tax expense and therefore the cost of complying with applicable laws;
is an imperfect substitute for cash flow as it eliminates depreciation and amortization expense but does not include cash expended for capital expenditures required to operate our business;
does not reflect the impact of earnings or charges resulting from matters we consider not to be indicative of our ongoing operations; and
does not reflect limitations on our costs related to transferring earnings from our subsidiaries to us.
We compensate for these limitations by using adjusted EBITDA along with other comparative tools, together with US GAAP measurements, to assist in the evaluation of operating performance. Such US GAAP measurements include operating income, net income, cash flows from operations and other cash flow data. We have significant uses of cash, including capital expenditures, interest payments, debt principal repayments, taxes and other non-recurring charges, which are not reflected in adjusted EBITDA.
Adjusted EBITDA was determined as follows:
 
Year Ended
December 31,
 
Amount change:
(in millions)
2015
 
2014
 
2013
 
2015 vs. 2014
 
2014 vs. 2013
Net income attributable to Global Brass and Copper Holdings, Inc.
$
35.6

 
$
31.7

 
$
10.4

 
$
3.9

 
$
21.3

Interest expense
39.1

 
39.6

 
39.8

 
(0.5
)
 
(0.2
)
Provision for income taxes
15.9

 
16.6

 
22.2

 
(0.7
)
 
(5.6
)
Depreciation expense
13.5

 
12.2

 
8.5

 
1.3

 
3.7

Amortization expense
0.1

 
0.1

 
0.1

 

 

Unrealized (gain) loss on derivative contracts (a)
(0.6
)
 
3.0

 
(0.2
)
 
(3.6
)
 
3.2

LIFO liquidation loss (gain) (b)
0.1

 
0.6

 
(2.0
)
 
(0.5
)
 
2.6

Loss on extinguishment of debt (c)
3.1

 

 

 
3.1

 

Non-cash accretion of income of Dowa Joint Venture (d)
(0.2
)
 
(0.7
)
 
(0.7
)
 
0.5

 

Non-cash Halkos profits interest compensation expense (e)

 

 
29.3

 

 
(29.3
)
Management fees (f)

 

 
4.8

 

 
(4.8
)
Specified legal / professional expenses (g)
2.8

 
4.3

 
4.3

 
(1.5
)
 

Lower of cost or market adjustment to inventory (h)
6.6

 
0.2

 
0.3

 
6.4

 
(0.1
)
Share-based compensation expense (i)
4.2

 
1.7

 
1.2

 
2.5

 
0.5

Restructuring and other business transformation charges (j)
0.9

 
0.4

 

 
0.5

 
0.4

Adjusted EBITDA
$
121.1

 
$
109.7

 
$
118.0

 
$
11.4

 
$
(8.3
)
(a)
Represents unrealized gains and losses on derivative contracts.
(b)
Calculated based on the difference between the base year LIFO carrying value and the metal prices prevailing in the market at the time of inventory depletion.
(c)
Represents the loss on extinguishment of debt recognized in connection with the open market purchases of our Senior Secured Notes.
(d)
As a result of the application of purchase accounting in connection with the November 2007 acquisition, no carrying value was initially assigned to our equity investment in our Dowa Joint Venture. This adjustment represents the accretion of equity in our Dowa Joint Venture at the date of the acquisition over a 13-year period (i.e., the estimated

48

Table of Contents

useful life of the technology and patents of the joint venture). In 2015, we sold our investment in the Dowa Joint Venture.
(e)
Represents non-cash compensation.
(f)
Represents an early termination fee.
(g)
Represents selected professional fees for accounting, tax, legal and consulting services incurred as a public company that exceed our expected long-term requirements. 
(h)
Represents non-cash lower of cost or market charges for the write down of domestic, non-copper metal inventory.
(i)
Represents compensation expense resulting from stock compensation awards to certain employees and our Board of Directors.
(j)
Restructuring and other business transformation charges in 2015 and 2014 represent severance charges at Olin Brass.
Net income attributable to Global Brass and Copper Holdings, Inc. increased by $3.9 million, or 12.3%, in 2015 compared to 2014 mainly due to an increase in gross profit and the gain on sale of our share in the Dowa Joint Venture, partially offset by an increase in selling, general and administrative expenses and the loss on extinguishment of debt, as described elsewhere in this report.
Adjusted EBITDA increased by $11.4 million, or 10.4%, in 2015 compared to 2014 due to decreased manufacturing conversion costs of $11.2 million and the gain on the sale of our investment in joint venture of $6.3 million, partially offset by an increase of $5.3 million in employee compensation and related costs.
Net income attributable to Global Brass and Copper Holdings, Inc. increased by $21.3 million in 2014 compared to 2013 due to a decrease in non-cash Halkos profits interest compensation expense, management fees and the provision for income taxes, partially offset by a decrease in gross profit, as described elsewhere in this report.
Adjusted EBITDA decreased by $8.3 million, or 7.0%, in 2014 compared to 2013, predominately due to higher manufacturing conversion costs of $8.4 million primarily due to inclement weather in the first quarter of 2014 and operational issues at Olin Brass that continued through the first half of 2014.
Adjusted diluted earnings per common share
Adjusted diluted earnings per common share is defined as diluted income per common share adjusted to remove the after-tax impact of the add backs to EBITDA in calculating adjusted EBITDA. We believe that adjusted diluted earnings per common share supplements our US GAAP results to provide a more complete understanding of the results of our business, and we believe it is useful to our investors and other parties for these same reasons. Adjusted diluted earnings per common share may not be comparable to similarly titled measures presented by other companies and is not a measure of operating performance or liquidity defined by US GAAP.
Adjusted diluted earnings per common share was determined as follows:
 
Year Ended
December 31,
 
Amount change:
 
2015
 
2014
 
2013
 
2015 vs. 2014
 
2014 vs. 2013
Diluted net income attributable to Global Brass and
Copper Holdings, Inc. per common share, as reported
$
1.66

 
$
1.49

 
$
0.49

 
$
0.17

 
$
1.00

Non-cash Halkos profits interest compensation expense

 

 
1.39

 

 
(1.39
)
Management fees

 

 
0.14

 

 
(0.14
)
Unrealized (gain) loss on derivative contracts
(0.02
)
 
0.08

 

 
(0.10
)
 
0.08

Loss on extinguishment of debt
0.10

 

 

 
0.10

 

Non-cash accretion of income of Dowa Joint Venture

 
(0.02
)
 
(0.02
)
 
0.02

 

Specified legal / professional expenses
0.10

 
0.13

 
0.13

 
(0.03
)
 

Lower of cost or market adjustment to inventory
0.21

 
0.01

 
0.01

 
0.20

 

Loss (gain) on LIFO layer depletion

 
0.02

 
(0.06
)
 
(0.02
)
 
0.08

Share-based compensation expense
0.13

 
0.05

 
0.04

 
0.08

 
0.01

Restructuring and other business transformation charges
0.02

 
0.01

 

 
0.01

 
0.01

Adjusted diluted earnings per common share (a)
$
2.20

 
$
1.77

 
$
2.12

 
$
0.43

 
$
(0.35
)
(a)
The non-cash profits interest compensation expense assumed no tax benefits. All remaining adjustments include a tax effect.

49

Table of Contents

Results of Operations
Consolidated Results of Operations for the Year Ended December 31, 2015, Compared to the Year Ended December 31, 2014.
 
Year ended December 31,
 
Change:
2015 vs. 2014
(in millions)
2015
 
% of Net 
Sales
 
2014
 
% of Net 
Sales
 
Amount
 
Percent
Net sales
$
1,506.2

 
100.0
 %
 
$
1,711.4

 
100.0
 %
 
$
(205.2
)
 
(12.0
)%
Cost of sales
(1,335.9
)
 
88.7
 %
 
(1,546.8
)
 
90.4
 %
 
210.9

 
(13.6
)%
Gross profit
170.3

 
11.3
 %
 
164.6

 
9.6
 %
 
5.7

 
3.5
 %
Selling, general and administrative expenses
(83.2
)
 
5.5
 %
 
(76.9
)
 
4.5
 %
 
(6.3
)
 
8.2
 %
Operating income
87.1

 
5.8
 %
 
87.7

 
5.1
 %
 
(0.6
)
 
(0.7
)%
Interest expense
(39.1
)
 
2.6
 %
 
(39.6
)
 
2.3
 %
 
0.5

 
(1.3
)%
Loss on extinguishment of debt
(3.1
)
 
0.2
 %
 

 
 %
 
(3.1
)
 
N/A

Gain on sale of investment in joint venture
6.3

 
0.4
 %
 

 
 %
 
6.3

 
N/A

Other income (expense), net
0.2

 
 %
 
(0.5
)
 
 %
 
0.7

 
(140.0
)%
Income before provision for income taxes and equity income
51.4

 
3.4
 %
 
47.6

 
2.8
 %
 
3.8

 
8.0
 %
Provision for income taxes
(15.9
)
 
1.1
 %
 
(16.6
)
 
1.0
 %
 
0.7

 
(4.2
)%
Income before equity income
35.5

 
2.4
 %
 
31.0

 
1.8
 %
 
4.5

 
14.5
 %
Equity income, net of tax
0.3

 
 %
 
1.1

 
0.1
 %
 
(0.8
)
 
(72.7
)%
Net income
35.8

 
2.4
 %
 
32.1

 
1.9
 %
 
3.7

 
11.5
 %
Net income attributable to noncontrolling interest
(0.2
)
 
 %
 
(0.4
)
 
 %
 
0.2

 
(50.0
)%
Net income attributable to Global Brass and Copper Holdings, Inc.
$
35.6

 
2.4
 %
 
$
31.7

 
1.9
 %
 
$
3.9

 
12.3
 %
Adjusted EBITDA (a)
$
121.1

 
8.0
 %
 
$
109.7

 
6.4
 %
 
$
11.4

 
10.4
 %
________________________ 
(a)See “Changes in Certain GAAP and Non-GAAP Measures—Adjusted EBITDA.”
N/A - not applicable
The following discussions present an analysis of our results of operations for 2015 as compared to 2014. See “Changes in Certain GAAP and Non-GAAP Measures” for discussions of net sales, adjusted sales, gross profit, adjusted gross profit, selling, general and administrative expenses, adjusted selling, general and administrative expenses, net income attributable to Global Brass and Copper Holdings, Inc., adjusted EBITDA, diluted net income attributable to Global Brass and Copper Holdings, Inc. per common share and adjusted diluted earnings per common share. These discussions should be read in conjunction with the accompanying consolidated financial statements and the notes thereto.
Interest expense
Interest expense decreased by $0.5 million primarily due to lower average principal borrowings on our debt facilities of $373.8 million in 2015 as compared to $382.0 million in 2014. The lower average borrowings are mainly the result of our purchasing $29.7 million of our Senior Secured Notes in the open market during 2015.

50

Table of Contents

The following table summarizes the components of interest expense:
 
Year Ended
December 31,
 
Amount change:
(in millions)
2015
 
2014
 
2015 vs. 2014
Interest on principal
$
35.5

 
$
36.1

 
$
(0.6
)
Amortization of debt issuance costs
2.8

 
2.7

 
0.1

Capitalized interest
(0.2
)
 
(0.2
)
 

Other borrowing costs (a)
1.0

 
1.0

 

Total interest expense
$
39.1

 
$
39.6

 
$
(0.5
)
________________________ 
(a)Includes fees related to letters of credit and unused line of credit fees.
Loss on extinguishment of debt
In 2015, we purchased $29.7 million principal amount of our Senior Secured Notes in the open market for an aggregate price of $32.2 million, plus accrued interest. As a result of these purchases, we recognized a loss on the extinguishment of debt of $3.1 million, which includes a premium of $2.5 million and the write-off of $0.6 million of unamortized debt issuance costs.
Gain on sale of investment in joint venture
In April 2015, we sold our 50% share of the Dowa Joint Venture to Dowa Co. for $8.0 million. During 2015, we recognized a gain of $6.3 million and related tax expense of $1.5 million on the sale.
Provision for income taxes
Our provision for income taxes decreased by $0.7 million, or 4.2%, and the effective income tax rate decreased from 34.9% to 30.9%. The effective tax rate declined predominantly due to a reduction in the valuation allowance based on our increase in foreign source income, which was attributable to the gain on the sale of our joint venture investment in 2015, as well as the reduction of interest expense in 2016 and beyond.

51

Table of Contents

Segment Results of Operations
Segment Results of Operations for the Year Ended December 31, 2015, Compared to the Year Ended December 31, 2014.
 
Year Ended
December 31,
 
Change:
2015 vs. 2014
(in millions)
2015
 
2014
 
Amount
 
Percent
Pounds shipped (a)
 
 
 
 
 
 
 
Olin Brass
260.0

 
269.1

 
(9.1
)
 
(3.4
)%
Chase Brass
218.9

 
221.3

 
(2.4
)
 
(1.1
)%
A.J. Oster
73.1

 
68.7

 
4.4

 
6.4
 %
Corporate (b)
(40.1
)
 
(38.7
)
 
(1.4
)
 
(3.6
)%
Total
511.9

 
520.4

 
(8.5
)
 
(1.6
)%
Net sales
 
 
 
 
 
 
 
Olin Brass
$
721.9

 
$
847.8

 
$
(125.9
)
 
(14.9
)%
Chase Brass
544.1

 
603.7

 
(59.6
)
 
(9.9
)%
A.J. Oster
293.3

 
313.9

 
(20.6
)
 
(6.6
)%
Corporate (b)
(53.1
)
 
(54.0
)
 
0.9

 
1.7
 %
Total
$
1,506.2

 
$
1,711.4

 
$
(205.2
)
 
(12.0
)%
Adjusted EBITDA
 
 
 
 
 
 
 
Olin Brass
$
48.3

 
$
36.9

 
$
11.4

 
30.9
 %
Chase Brass
68.9

 
69.2

 
(0.3
)
 
(0.4
)%
A.J. Oster
15.8

 
16.2

 
(0.4
)
 
(2.5
)%
Total adjusted EBITDA of operating segments
$
133.0

 
$
122.3

 
$
10.7

 
8.7
 %
________________________ 
(a)Amounts exclude quantity of unprocessed metal sold.
(b)Amounts represent intercompany eliminations.
See Note 4, “Segment Information,” of our audited consolidated financial statements, which are included elsewhere in this annual report, for a reconciliation of adjusted EBITDA of segments to income before provision for income taxes and equity income.
The following discussions present an analysis of our results by segment for 2015 as compared to 2014. This discussion should be read in conjunction with the accompanying consolidated financial statements and the notes thereto.
Olin Brass
Net sales decreased by $125.9 million predominately due to a $113.7 million decline in the metal cost recovery component. The majority of that decline, approximately $100.0 million, is due to lower sales of unprocessed metals and decreased metal prices.
Adjusted sales decreased by $12.2 million primarily due to lower volume, which accounted for $11.1 million of the decline. Volume decreased due to lower munitions demand partially offset by increased coinage volume resulting from an overall increase in demand, as well as due to the U.S. Mint replenishing coin inventories which had become too low.
Adjusted EBITDA increased by $11.4 million, the primary drivers of which were a decrease in manufacturing conversion costs resulting from improvements in productivity, yield, and cost controls and selling price increases due to complexity of product, partially offset by the negative effect of decreased volume and increased employee compensation and related costs.
Chase Brass
Net sales decreased by $59.6 million primarily due to a decline in the metal cost recovery component, which included a decrease of $5.2 million due to lower volume and $55.1 million due to decreased metal prices.

52

Table of Contents

Adjusted sales increased by $0.6 million, which was the result of favorable price and product mix fluctuations of $2.0 million partially offset by decreased volume of $1.4 million. Volume in the building and housing market increased, while volumes decreased in the transportation, electronics / electrical components and industrial machinery and equipment markets.
Adjusted EBITDA decreased by $0.3 million as the $0.6 million increase in adjusted sales was not large enough to offset the increase in manufacturing and increased adjusted selling, general and administrative expenses.
A.J. Oster
Net sales decreased by $20.6 million, due to a decrease in the metal cost recovery component, which included a decline of $34.5 million as a result of decreased metal prices, partially offset by an increase in volume of $12.1 million.
Adjusted sales increased by $1.9 million due to higher volume, which had a favorable impact of $7.8 million, partially offset by unfavorable product mix fluctuations of $5.9 million due to less sales of high performance alloys. Volume increased by 4.4 million pounds, or 6.4%, due to A.J. Oster’s success in achieving its commercial growth initiatives, especially in the electronics / electrical components market and in miscellaneous stamping.
Adjusted EBITDA decreased by $0.4 million, which was primarily due to unfavorable product mix fluctuations and increased supply costs from Olin Brass. The decrease was partially offset by increased volume and decreased manufacturing conversion costs.

Results of Operations
Consolidated Results of Operations for the Year Ended December 31, 2014, Compared to the Year Ended December 31, 2013.
 
Year ended December 31,
 
Change:
2014 vs. 2013
(in millions)
2014
 
% of Net Sales
 
2013
 
% of Net Sales
 
Amount
 
Percent
Net sales
$
1,711.4

 
100.0
 %
 
$
1,758.5

 
100.0
 %
 
$
(47.1
)
 
(2.7
)%
Cost of sales
(1,546.8
)
 
90.4
 %
 
(1,576.2
)
 
89.6
 %
 
29.4

 
(1.9
)%
Gross profit
164.6

 
9.6
 %
 
182.3

 
10.4
 %
 
(17.7
)
 
(9.7
)%
Selling, general and administrative expenses (a)
(76.9
)
 
4.5
 %
 
(110.8
)
 
6.3
 %
 
33.9

 
(30.6
)%
Operating income
87.7

 
5.1
 %
 
71.5

 
4.1
 %
 
16.2

 
22.7
 %
Interest expense
(39.6
)
 
2.3
 %
 
(39.8
)
 
2.3
 %
 
0.2

 
(0.5
)%
Other expense, net
(0.5
)
 
 %
 
(0.3
)
 
 %
 
(0.2
)
 
66.7
 %
Income before provision for income taxes and equity income
47.6

 
2.8
 %
 
31.4

 
1.8
 %
 
16.2

 
51.6
 %
Provision for income taxes
(16.6
)
 
1.0
 %
 
(22.2
)
 
1.3
 %
 
5.6

 
(25.2
)%
Income before equity income
31.0

 
1.8
 %
 
9.2

 
0.5
 %
 
21.8

 
237.0
 %
Equity income, net of tax
1.1

 
0.1
 %
 
1.5

 
0.1
 %
 
(0.4
)
 
(26.7
)%
Net income
32.1

 
1.9
 %
 
10.7

 
0.6
 %
 
21.4

 
200.0
 %
Net income attributable to noncontrolling interest
(0.4
)
 
 %
 
(0.3
)
 
 %
 
(0.1
)
 
33.3
 %
Net income attributable to Global Brass and Copper Holdings, Inc.
$
31.7

 
1.9
 %
 
$
10.4

 
0.6
 %
 
$
21.3

 
204.8
 %
Adjusted EBITDA (b)
$
109.7

 
6.4
 %
 
$
118.0

 
6.7
 %
 
$
(8.3
)
 
(7.0
)%
 ________________________ 
(a)The 2013 amount includes $29.3 million of non-cash profits interest compensation expense. There was no such non-cash profits interest compensation expense in 2014.
(b)See “Changes in Certain GAAP and Non-GAAP Measures—Adjusted EBITDA.”
The following discussions present an analysis of our results of operations for 2014 as compared to 2013. See “Changes in Certain GAAP and Non-GAAP Measures” for discussions of net sales, adjusted sales, gross profit, adjusted gross profit,

53

Table of Contents

selling, general and administrative expenses, adjusted selling, general and administrative expenses, net income attributable to Global Brass and Copper Holdings, Inc., adjusted EBITDA and adjusted diluted earnings per common share. These discussions should be read in conjunction with the accompanying consolidated financial statements and the notes thereto.
Interest expense
The following table summarizes the components of interest expense:
 
 Year Ended
December 31,
 
Amount change:
(in millions)
2014
 
2013
 
2014 vs. 2013
Interest on principal
$
36.1

 
$
36.5

 
$
(0.4
)
Amortization of debt issuance costs
2.7

 
2.5

 
0.2

Capitalized interest
(0.2
)
 
(0.1
)
 
(0.1
)
Other borrowing costs (a)
1.0

 
0.9

 
0.1

Interest expense
$
39.6

 
$
39.8

 
$
(0.2
)
________________________
(a)Includes fees related to letters of credit and unused line of credit fees.
Provision for income taxes
The change in the provision for income taxes was primarily due to lower taxable income even though pre-tax income in 2013 includes $29.3 million of non-cash profits interest compensation expense because that expense is non-deductible for tax purposes. Our effective tax rate decreased to 34.9% from 70.7% due largely to this non-deductible non-cash profits interest compensation expense.
Segment Results of Operations
Segment Results of Operations for the Year Ended December 31, 2014, Compared to the Year Ended December 31, 2013
 
Year Ended
December 31,
 
Change:
2014 vs. 2013
(in millions)
2014
 
2013
 
Amount
 
Percent
Pounds shipped (a)
 
 
 
 
 
 
 
Olin Brass
269.1

 
279.4

 
(10.3
)
 
(3.7
)%
Chase Brass
221.3

 
216.0

 
5.3

 
2.5
 %
A.J. Oster
68.7

 
66.9

 
1.8

 
2.7
 %
Corporate (b)
(38.7
)
 
(39.3
)
 
0.6

 
1.5
 %
Total
520.4

 
523.0

 
(2.6
)
 
(0.5
)%
Net Sales
 
 
 
 
 
 
 
Olin Brass
$
847.8

 
$
874.1

 
$
(26.3
)
 
(3.0
)%
Chase Brass
603.7

 
622.0

 
(18.3
)
 
(2.9
)%
A.J. Oster
313.9

 
316.2

 
(2.3
)
 
(0.7
)%
Corporate (b)
(54.0
)
 
(53.8
)
 
(0.2
)
 
(0.4
)%
Total
$
1,711.4

 
$
1,758.5

 
$
(47.1
)
 
(2.7
)%
Adjusted EBITDA
 
 
 
 
 
 
 
Olin Brass
$
36.9

 
$
48.3

 
$
(11.4
)
 
(23.6
)%
Chase Brass
69.2

 
67.2

 
2.0

 
3.0
 %
A.J. Oster
16.2

 
16.9

 
(0.7
)
 
(4.1
)%
Total adjusted EBITDA of operating segments
$
122.3

 
$
132.4

 
$
(10.1
)
 
(7.6
)%
________________________ 
(a)Amounts exclude quantity of unprocessed metal sold.
(b)Amounts represent intercompany eliminations.

54

Table of Contents

See Note 4, “Segment Information,” of our audited consolidated financial statements, which are included elsewhere in this annual report, for a reconciliation of adjusted EBITDA of segments to income before provision for income taxes and equity income.
The following discussions present an analysis of our results by segment for 2014 as compared to 2013. This discussion should be read in conjunction with the accompanying consolidated financial statements and the notes thereto.
Olin Brass
Olin Brass net sales decreased by $26.3 million, or 3.0%, almost entirely due to lower volume.
Volume decreased by 10.3 million pounds, primarily the result of lower demand in the munitions market as well as the electronics / electrical components market. Lower demand in the munitions market was attributable to destocking throughout the supply chain, as well as due to the reduced demand following an unprecedented peak in demand in 2013. The decrease in demand was partially offset by higher demand in the automotive and coinage markets.
Adjusted EBITDA of Olin Brass decreased by $11.4 million, due primarily to higher manufacturing conversion costs resulting from inclement weather in the first quarter of 2014, operational issues that continued into the first half of 2014 which adversely impacted product flow and yield, lower volume and a shift in product mix.
Chase Brass
Chase Brass net sales decreased by $18.3 million, or 2.9%, due primarily to lower metal prices of $33.8 million, which was partially offset by increased volume.
The increase in volume was attributable to higher demand in the building and housing and transportation markets. These increases were partially offset by lower demand in the electronics / electrical components market resulting primarily from a customer sourcing their finished products offshore, which negatively impacted demand for brass rod in this market.
Adjusted EBITDA of Chase Brass increased by $2.0 million due to the aforementioned increase in volume.
A.J. Oster
A. J. Oster net sales decreased by $2.3 million, or 0.7%, due primarily to lower metal prices of $11.0 million, partially offset by increased volume.
Volume increased by 1.8 million pounds, or 2.7%, which was primarily the result of increased demand in the automotive and building and housing markets partially offset by lower demand in the electronics / electrical components market.
Adjusted EBITDA of A.J. Oster decreased by $0.7 million. The decrease was due primarily to increased employee compensation and related costs and higher prices on purchases from Olin Brass, which resulted in higher conversion costs, partially offset by increased volume.
Changes in Financial Condition
The following discussions present an analysis of fluctuations in certain accounts within our consolidated balance sheet as of December 31, 2015 as compared to the amounts as of December 31, 2014. These discussions should be read in conjunction with the accompanying audited consolidated financial statements and the notes thereto.
Cash increased by $38.9 million primarily due to earnings generated in the last year and working capital improvements, partially offset by capital expenditures and purchases of Senior Secured Notes.
Accounts receivable decreased by $32.7 million, which is primarily due to the impact of decreased metal prices on accounts receivable.
Inventory decreased by $12.7 million primarily due to the $6.6 million non-cash, lower of cost or market adjustments on domestic non-copper metal inventory.
Accounts payable decreased by $11.5 million, which is mostly attributable to the impact of decreased metal prices on accounts payable.
Our non-current portion of debt decreased by $28.4 million, reflective of our open market purchase of $29.7 million of principal amount of Senior Secured Notes.

55

Table of Contents

Liquidity and Capital Resources
Sources and Uses of Cash
Our primary uses of cash are to fund working capital, operating expenses, service our debt and make capital expenditures. Historically, our primary sources of short-term liquidity and long-term liquidity have been cash flow from operations and borrowings under our ABL Facility. Holdings derives all of its cash flow from its subsidiaries, including GBC, and receives dividends, distributions and other payments from them to generate the funds necessary to meet its financial obligations. However, Holdings is a holding company with no operations, no employees and no assets other than its investment in GBC. All of our operations are conducted at GBC and its subsidiaries. GBC is also the primary obligor on our indebtedness, and Holdings has no indebtedness other than its guarantee of GBC’s indebtedness.
The credit agreement governing the ABL Facility and the indenture governing the Senior Secured Notes (the “Indenture”) limit the ability of GBC and its subsidiaries to pay dividends or distribute cash to Holdings and to its equityholders, although ordinary course dividends and distributions to meet the limited holding company expenses and related obligations at Holdings of up to $5.0 million per year are permitted under those agreements. Under the terms of the Indenture, GBC is also permitted to pay dividends or distribute to Holdings and its equityholders under certain restrictions. As of December 31, 2015, all of the net assets of the subsidiaries are restricted except for $79.8 million, which are permitted for dividend distributions under the Indenture.
We do not believe that the restrictions on dividends and distributions to Holdings and its equityholders imposed by the terms of our debt agreements have any significant impact on our liquidity, financial condition or results of operations. We believe that these resources will be sufficient to meet our working capital, debt service and capital investment obligations for the foreseeable future, including costs that we may incur in connection with our growth strategy.
Capital improvements and replacement costs account for the majority of our capital expenditures, which we expect to be in line with our historical spend over the foreseeable future.
Cash Flows
The following table presents the summary components of net cash provided by (used in) operating, investing and financing activities for the periods indicated. The following discussion presents an analysis of cash flows for each of the years ended December 31, 2015, December 31, 2014 and December 31, 2013 and should be read in conjunction with our consolidated statements of cash flows in our audited consolidated financial statements included elsewhere in this annual report.
 
Cash Flow Analysis
Year Ended December 31,
 
Change
(in millions)
2015
 
2014
 
2013
 
2015 vs. 2014
 
2014 vs. 2013
Net cash provided by operating activities
$
88.8

 
$
64.5

 
$
28.0

 
$
24.3

 
$
36.5

Net cash used in investing activities
$
(13.3
)
 
$
(22.3
)
 
$
(26.0
)
 
$
9.0

 
$
3.7

Net cash used in financing activities
$
(36.7
)
 
$
(9.0
)
 
$
(4.9
)
 
$
(27.7
)
 
$
(4.1
)
Cash flows from operating activities
Net cash provided by operating activities increased by $24.3 million in 2015 as compared to 2014 due primarily to the impact of decreased metal prices on working capital, the utilization in 2015 of the overpayment of taxes that occurred in 2014 and a decrease in incentive compensation payments in 2015.
Net cash provided by operating activities increased by $36.5 million in 2014 as compared to 2013, also due primarily to working capital improvements, of which $26.0 million relates primarily to improved accounts receivable collections (improvement of four days in days sales outstanding) and $17.6 million relates to improved inventory management.
Cash flows from investing activities
Our cash flows from investing activities in 2015 benefited from $8.0 million in proceeds from the sale of our investment in the Dowa Joint Venture and from lower capital expenditures compared to 2014 and 2013.

56

Table of Contents

Cash flows from financing activities
Net cash used in financing activities was $36.7 million as compared to $9.0 million and $4.9 million in 2014 and 2013, respectively. The change in net cash flows from financing activities in 2015 compared to the prior years is primarily attributed to $32.2 million of cash used to purchase Senior Secured Notes in the open market in 2015.
Outstanding Indebtedness
Our long-term debt outstanding was $343.1 million at December 31, 2015 and $371.4 million at December 31, 2014, inclusive of the current portions. 
The ABL Facility
Our borrowing base is equal to a percentage of receivables and inventories less reserves. In the event of increased commodity prices as indicated by the terms of the ABL Facility agreement, we may request, but the lenders are not obligated to, increase the maximum borrowings available up to $250.0 million. At any time, if the amount outstanding under the ABL Facility exceeds the maximum allowable borrowings, we may be required to make a mandatory prepayment for the amount of the excess borrowings. As of December 31, 2015, we had $196.9 million available for borrowing under the ABL Facility.
We may elect to receive advances under the ABL Facility in the form of either prime rate advances or LIBOR rate advances, as defined by the agreement governing the ABL Facility. The unused portion under the ABL Facility determines the applicable spread added to the LIBOR rate. As of December 31, 2015 and December 31, 2014, amounts outstanding, if any, under the ABL Facility accrued interest at a rate of 4.25%.
The ABL Facility has an expiration date of June 1, 2017 and contains various debt covenants to which we are subject on an ongoing basis. As of December 31, 2015, we were in compliance with all such covenants.
Senior Secured Notes
On June 1, 2012, GBC issued $375.0 million in aggregate principal amount of 9.50% Senior Secured Notes that mature on June 1, 2019 and accrue interest at the rate of 9.50% per annum. Interest is paid semiannually in arrears on June 1 and December 1.The Senior Secured Notes are guaranteed by Holdings, and substantially all of GBC’s existing and future U.S. subsidiaries. The Senior Secured Notes are secured by a senior-priority security interest in our fixed assets (which secure the ABL Facility on a junior-priority basis) and by a junior-priority security interest in our accounts receivable and inventory (which secure the ABL Facility on a senior-priority basis).
The indenture governing the Senior Secured Notes contains certain covenants, obligations and restrictions that are customary in these types of indebtedness. We are in compliance with all covenants relating to the Senior Secured Notes as of December 31, 2015.
Debt Purchase Authorization
In 2015, our Board of Directors authorized the purchase, subject to market conditions and other factors, of up to $100 million of our Senior Secured Notes in the open market or privately negotiated transactions. In 2015, we purchased in the open market $29.7 million of principal amount of our Senior Secured Notes for an aggregate purchase price of $32.2 million.  Subsequent to December 31, 2015, we purchased in the open market $31.0 million of principal amount of our Senior Secured Notes for an aggregate purchase price of $32.9 million.  The unused balance of this authorization is approximately $35.0 million.


57

Table of Contents

Contractual Obligations
The following table illustrates our contractual commitments as of December 31, 2015: 
Contractual commitments
 
 
 
 
 
 
 
 
 
 
 
 
 
 
(in millions)
 
2016
 
2017
 
2018
 
2019
 
2020
 
Beyond
 
Total
Senior Secured Notes—Principal (a)
 
$

 
$

 
$

 
$
345.3

 
$

 
$

 
$
345.3

Senior Secured Notes—Interest (a)
 
32.8

 
32.8

 
32.8

 
16.4

 

 

 
114.8

Capital Lease Obligation (b)
 
1.5

 
1.5

 
1.6

 
1.0

 

 

 
5.6

Purchase Obligations
 
134.0

 
3.1

 
2.9

 
0.7

 

 

 
140.7

IAM National Pension Fund
 
4.0

 
3.4

 

 

 

 

 
7.4

Leases
 
2.4

 
1.9

 
1.5

 
0.6

 
0.2

 
0.2

 
6.8

Total
 
$
174.7

 
$
42.7

 
$
38.8

 
$
364.0

 
$
0.2

 
$
0.2

 
$
620.6

(a)
Reflects future obligations based on the outstanding Senior Secured Notes as of December 31, 2015; however, subsequent to year-end, we purchased additional Senior Secured Notes in the open market. These purchases result in the shift of contractual commitments of $31.0 million for principal payments from 2019 to 2016 and a reduction in the interest payments (approximately $2.9 million of lower annualized interest payments) in 2016 and beyond. See further discussion in Note 11, “Financing.”
(b)
Represents principal and interest portion of capital lease obligation.
We are obligated to make future payments under various contracts such as debt agreements, lease agreements and collective bargaining agreements. Operating lease obligations are payment obligations under leases classified as operating leases. Most leases are for a period of three years but some last up to five years and are primarily for equipment used in our manufacturing and distribution operations. Our purchase obligations are agreements to purchase goods or services that are enforceable and legally binding on us that specify all significant terms, including fixed or minimum quantities, fixed or variable prices and the approximate timing of the transaction. Purchase obligations include the pricing of anticipated metal purchases using contractual metal prices, or where pricing is dependent on prevailing COMEX or London Metal Exchange (“LME”) prices at the time of delivery, market metal prices as of December 31, 2015, as well as energy and utility prices. As a result of the variability in the pricing of many of our metal purchasing obligations, actual amounts may vary from the amounts shown above.
We participate in a multi-employer pension plan under the collective bargaining agreement that covers the East Alton, Illinois operations of our Olin Brass segment and the Alliance, Ohio operations of our A.J. Oster segment. These collective bargaining agreements obligate us to contribute to the union’s pension plan at a rate per eligible hour per covered employee as specified in the agreement. The contributions to the multi-employer plan are a function of employment levels and eligible work hours. As a result, actual amounts may vary from the amounts shown above.

The ABL Facility bears interest at variable rates, and the outstanding amounts under the ABL Facility will vary from time to time, so estimating future interest and principal payments under the ABL Facility is not practicable. The ABL Facility matures on June 1, 2017.
At December 31, 2015, we had a liability for uncertain tax positions, including interest and penalties, of $25.2 million, but as we are unable to reasonably estimate the ultimate amount or timing of settlement or other resolution, it is not practical to present annual payment information.

Off-Balance Sheet Arrangements
We have not created, and are not party to, any special-purpose or off-balance sheet entities for the purpose of raising capital, incurring debt or operating our business. We do not have any off-balance sheet arrangements or relationships with entities that are not consolidated into our financial statements that have or are reasonably likely to have a material current or future effect on our financial condition, changes in financial condition, sales, expenses, results of operations, liquidity, capital expenditures or capital resources.


58

Table of Contents

Critical Accounting Policies and Estimates
The preparation of our consolidated financial statements in accordance with US GAAP requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, equity, revenues and expenses, and various disclosures. Estimates are based on historical experience and on various other assumptions that are believed to be reasonable under the circumstances. The result of this process forms the basis for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. We review our estimates and judgments on a regular, ongoing basis. Actual results may differ from these estimates due to changes in circumstances and conditions.
The following accounting policies and estimates are considered critical in light of the potentially material impact that the estimates, judgments and uncertainties affecting the application of these policies might have on our reported financial information.
Our accounting policies are more fully described in Note 2, “Summary of Significant Accounting Policies,” to our audited consolidated financial statements included elsewhere in this annual report. There have been no significant changes to our critical accounting policies or estimates for the year ended December 31, 2015.
Revenue Recognition
We recognize revenue when title and risk of loss are transferred to customers, which is generally the date the product is shipped. Estimates for future rebates on certain product lines and product returns are recognized in the period in which the revenue is recorded. Rebates and returns are estimated based upon our historical experience, combined with a review of current developments. The allowance for doubtful accounts is estimated based upon our historical experience, combined with a review of current developments and the specific identification method of accounts for which payment has become unlikely. Billings to customers for shipping costs are included in net sales and the cost of shipping product to those customers is reflected as a component of cost of sales.
We defer the revenue from the sales of the unprocessed metal to toll customers (and the corresponding deferred expense for the sales) until the finished product has been shipped. The deferred revenue is recorded within accrued liabilities and the related deferred expense is recorded within prepaid expenses and other current assets on the consolidated balance sheets.

Inventories
Inventories include costs attributable to direct labor and manufacturing overhead but are primarily comprised of material costs. The metals component of inventories that is valued on a LIFO basis comprised approximately 70% of total inventory at both December 31, 2015 and 2014.
Other manufactured inventories, including the direct labor and manufacturing overhead components and certain non-U.S. inventories, are valued on a first-in, first-out (“FIFO”) basis. Elements of cost in finished goods inventory in addition to the cost of material include depreciation, amortization, utilities, consumable production supplies, maintenance, production wages and transportation costs.
Inventories are stated at the lower of cost or market. The market price of metals used in production and related scrap is subject to volatility. During periods when open-market prices decline below net book value, we may need to record a provision to reduce the carrying value of our inventory. We analyze the carrying value of inventory for impairment if circumstances indicate impairment may have occurred. If an impairment occurs, the amount of impairment loss is determined by measuring the excess of the carrying value of inventory over the net realizable value of inventory.
We record an estimate for slow moving and obsolete inventory based upon product knowledge, physical inventory observation, estimated future demand, market conditions and an aging analysis of the inventory on hand. Our policy is to evaluate all inventories including raw material, work-in-process and finished goods. Inventory in excess of our estimated usage requirements is written down to its estimated net realizable value.
Purchase Accounting
Determining the fair value of certain assets, liabilities and subsidiaries assumed in a business combination is judgmental in nature and often involves the use of significant estimates and assumptions. Some of the more significant estimates and assumptions used in valuing our acquisition of the worldwide metals business of Olin Corporation in 2007 and our

59

Table of Contents

acquisition of the order book, customer list and certain other assets of the North American operations of Bolton Metals Product Company (“Bolton”) in January 2008 included projected future cash flows and discount rates reflecting the risk inherent in future cash flows.
We recognized goodwill related to the acquisition of the order book, customer list and certain other assets of Bolton’s North American operations, as the purchase price exceeded the fair value of net assets. For the acquisition of the worldwide metals business of Olin Corporation, the estimated fair value of the net assets exceeded the purchase price, thus creating negative goodwill under then current GAAP guidance. As such, noncurrent assets were assigned no value in the acquisition from Olin Corporation.

Uncertain Tax Positions
Our management evaluates the recognition and measurement of uncertain tax positions based on applicable tax law, regulations, case law, administrative rulings and pronouncements and the facts and circumstances surrounding the tax position. Changes in our estimates related to the recognition and measurement of the amount recorded for uncertain tax positions could result in significant changes in our provision for (benefit from) income taxes, which could be material to our consolidated statements of operations.
Derivative Contracts
We measure the fair value of our derivative contract positions under the provisions of ASC 820, which defines fair value, establishes a framework for measuring fair value and enhances disclosures about fair value measures required under other accounting pronouncements but does not change existing guidance as to whether or not an instrument is carried at fair value. This guidance also specifies a fair value hierarchy based upon the observability of inputs used in valuation techniques.
In accordance with this guidance, fair value measurements are classified under the following hierarchy:
 
Level 1—Quoted prices for identical instruments in active markets.
Level 2—Quoted prices for similar instruments in active markets; quoted prices for identical or similar instruments in markets that are not active and model-derived valuations in which all significant inputs or significant value-drivers are observable in active markets.
Level 3—Model-derived valuations in which one or more significant inputs or significant value-drivers are unobservable.
In accordance with ASC 820, we determine the fair value of derivative contracts using Level 2 inputs. As of December 31, 2015, we did not hold assets or liabilities requiring a Level 3 measurement, and there were no transfers between the hierarchy levels during 2015 or 2014. We do not use hedge accounting for our derivative contracts. All gains and losses are recorded as cost of sales in the consolidated statements of operations as these contracts are marked to market each period.
Recently Issued and Recently Adopted Accounting Pronouncements
For information on recently issued and recently adopted accounting pronouncements, see Note 2, “Summary of Significant Accounting Policies,” to the consolidated financial statements, which are included elsewhere in this annual report.
Inflation and Seasonality
We experience effects of inflation on input costs, such as wages, medical benefits, natural gas, electricity, plating and other key inputs. We may not be able to offset fully the impact of inflation on these input costs or energy costs through price increases, productivity improvements or cost reduction programs.
There is a slight decrease in our net sales in each fourth quarter as a result of a decrease in demand due to customer shutdowns for the holidays and holiday and year-end maintenance of plants and inventory by customers. We also typically experience slight working capital increases in the first quarter. We do not foresee these seasonality trends to change materially.

60

Table of Contents

Item 7A. Quantitative and Qualitative Disclosures About Market Risk.
Market risk represents the risk of changes in the value of market risk sensitive instruments caused by fluctuations in interest rates, commodity prices and foreign exchange rates. Changes in these factors could cause fluctuations in the results of our operations and cash flows. In the ordinary course of business, we are primarily exposed to changes in commodity prices, interest rates and foreign currency exchange rates. To manage the volatility related to these exposures we use various financial instruments, including some derivatives, to help us manage our metal price, energy price, and interest rate risk. We also use offsetting forward sale and purchase agreements to help mitigate commodity price risks on operating margins. These agreements generally do not contain minimum purchase requirements.
We do not use derivative instruments for trading or speculative purposes and have not elected to use hedge accounting. We manage credit risk associated with derivative contracts by executing derivative instruments with counterparties that we believe are credit-worthy.
The following tables set forth the impact of a 10% price change on our hedging positions as of December 31, 2015 and December 31, 2014, respectively.
(in millions)
 
 
 
 
 
 
 
 
December 31, 2015
 
Notional value
 
Fair value
 
Unrealized
(losses) gains
 
Impact of 10%
price change
on fair value
Metals
 
$
18.2

 
$
17.1

 
$
(1.1
)
 
$
1.7

Natural Gas
 
1.7

 
1.3

 
(0.4
)
 
0.1

Electricity
 
2.6

 
2.7

 
0.1

 
0.3

Totals
 
$
22.5

 
$
21.1

 
$
(1.4
)
 
$
2.1

 
December 31, 2014
 
Notional value
 
Fair value
 
Unrealized losses
 
Impact of 10%
price change
on fair value
Metals
 
$
13.4

 
$
12.5

 
$
(0.9
)
 
$
1.3

Natural Gas
 
2.6

 
1.9

 
(0.7
)
 
0.2

Electricity
 
5.9

 
5.5

 
(0.4
)
 
0.6

Totals
 
$
21.9

 
$
19.9

 
$
(2.0
)
 
$
2.1

Commodity Prices
In the ordinary course of business, we are exposed to earnings and cash flow volatility resulting from fluctuations in metal, energy and utility costs. We use our balanced book approach, supported, where required, by derivative contracts, to substantially reduce the impact of metal price fluctuations on operating margins. Despite this, we must bear the cost of any shrinkage during production, which may increase the volatility of our results of operations. We also use derivative contracts to reduce uncertainty and volatility in energy and utility costs.
Interest Rates
We are exposed to volatility in interest rates and expense under the terms of our credit agreement. Interest rates under the ABL Facility are comprised of a base rate and margin. The ABL Facility provides the option of a LIBOR or prime base rate. While we had less than $0.1 million outstanding under the ABL Facility as of December 31, 2015, if and when we borrow under the ABL Facility and assuming interest rates rise, our debt service obligations on variable rate debt would increase even though the amount borrowed would not increase.
Foreign Exchange
We have international operations that accounted for approximately 6% of our net sales in 2015. The functional currency of our operating subsidiaries is the related local currency, and the currency effects of translating the financial statements are included in accumulated other comprehensive income and do not impact earnings unless there is a liquidation or sale of those foreign subsidiaries. During 2015, the fluctuation of the U.S. dollar against other currencies resulted in an unrealized currency translation loss that decreased our equity by $1.7 million. Gains or losses from currency translation primarily

61

Table of Contents

relate to our equity investment in the Dowa Joint Venture (prior to its disposition in April 2015) and to our operations in China (Olin Luotong Metals) and Mexico (A.J. Oster Mexico).
We also have exposure to foreign exchange risk on transactions that can potentially be denominated in foreign currencies other than the U.S. dollar. We do not attempt to hedge foreign currency exposure in a manner that would eliminate the effect of changes in foreign currency exchange rates on net income and cash flow. We do not speculate in foreign currency nor do we hedge the foreign currency translation of our international business to the U.S. dollar for purposes of consolidating our financial results, or other foreign currency net asset positions. During 2015, foreign currency transaction gains and losses resulted in an increase of income before provision for income taxes and equity income of approximately $0.7 million.

62

Table of Contents

Item 8. Financial Statements and Supplementary Data.
Report of Independent Registered Public Accounting Firm
To the Board of Directors and Stockholders of Global Brass and Copper Holdings, Inc.
In our opinion, the consolidated financial statements listed in the index appearing under Item 15(a)(1) present fairly, in all material respects, the financial position of Global Brass and Copper Holdings, Inc. and its subsidiaries at December 31, 2015 and 2014, and the results of their operations and their cash flows for each of the three years in the period ended December 31, 2015 in conformity with accounting principles generally accepted in the United States of America. In addition, in our opinion, the financial statement schedule listed in the index appearing under Item 15(a)(1) presents fairly, in all material respects, the information set forth therein when read in conjunction with the related consolidated financial statements. Also in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2015, based on criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). The Company's management is responsible for these financial statements and financial statement schedule, for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in Management’s Annual Report on Internal Control Over Financial Reporting appearing under Item 9A. Our responsibility is to express opinions on these financial statements, on the financial statement schedule, and on the Company's internal control over financial reporting based on our audits (which were integrated audits in 2015 and 2014). We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement and whether effective internal control over financial reporting was maintained in all material respects. Our audits of the financial statements included examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.
As discussed in Note 2 to the consolidated financial statements, the Company changed the manner in which it classifies debt issuance costs and deferred income taxes in 2015.
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
 
/s/ PricewaterhouseCoopers LLP
Chicago, Illinois
March 9, 2016


63

Table of Contents

Global Brass and Copper Holdings, Inc.
Consolidated Balance Sheets
 
 
As of
(in millions, except share and par value data)
December 31,
2015
 
December 31,
2014
Assets
 
 
 
Current assets:
 
 
 
Cash
$
83.5

 
$
44.6

Accounts receivable (net of allowance of $1.2 and $1.0 at December 31, 2015 and December 31, 2014, respectively)
119.6

 
152.3

Inventories
176.3

 
189.0

Prepaid expenses and other current assets
17.4

 
26.2

Income tax receivable
2.4

 
8.3

Total current assets
399.2

 
420.4

Property, plant and equipment, net
111.1

 
103.5

Investment in joint venture

 
2.0

Goodwill
4.4

 
4.4

Intangible assets, net
0.5

 
0.6

Deferred income taxes
38.0

 
30.1

Other noncurrent assets
4.0

 
5.3

Total assets
$
557.2

 
$
566.3

Liabilities and equity
 
 
 
Current liabilities:
 
 
 
Current portion of capital lease obligation
$
1.1

 
$
1.0

Accounts payable
71.0

 
82.5

Accrued liabilities
53.9

 
57.3

Accrued interest
3.0

 
3.2

Income tax payable
0.2

 
0.5

Total current liabilities
129.2

 
144.5

Noncurrent portion of debt
342.0

 
370.4

Other noncurrent liabilities
25.3

 
25.4

Total liabilities
496.5

 
540.3

Commitments and contingencies (Note 16)

 

Global Brass and Copper Holdings, Inc. stockholders’ equity:
 
 
 
Common stock - $0.01 par value; 80,000,000 shares authorized; 21,553,883 and 21,369,407 shares issued at December 31, 2015 and December 31, 2014, respectively
0.2

 
0.2

Additional paid-in capital
36.9

 
32.5

Retained earnings (accumulated deficit)
22.3

 
(10.1
)
Treasury stock - 46,729 and 29,200 shares at December 31, 2015 and December 31, 2014, respectively
(0.7
)
 
(0.4
)
Accumulated other comprehensive loss
(2.3
)
 
(0.6
)
Total Global Brass and Copper Holdings, Inc. stockholders’ equity
56.4

 
21.6

Noncontrolling interest
4.3

 
4.4

Total equity
60.7

 
26.0

Total liabilities and equity
$
557.2

 
$
566.3

The accompanying notes are an integral part of these consolidated financial statements.

64

Table of Contents

Global Brass and Copper Holdings, Inc.
Consolidated Statements of Operations
 
 
Year Ended
December 31,
(in millions, except per share data)
2015
 
2014
 
2013
Net sales
$
1,506.2

 
$
1,711.4

 
$
1,758.5

Cost of sales
(1,335.9
)
 
(1,546.8
)
 
(1,576.2
)
Gross profit
170.3

 
164.6

 
182.3

Selling, general and administrative expenses (a)
(83.2
)
 
(76.9
)
 
(110.8
)
Operating income
87.1

 
87.7

 
71.5

Interest expense
(39.1
)
 
(39.6
)
 
(39.8
)
Loss on extinguishment of debt
(3.1
)
 

 

Gain on sale of investment in joint venture
6.3

 

 

Other income (expense), net
0.2

 
(0.5
)
 
(0.3
)
Income before provision for income taxes and equity income
51.4

 
47.6

 
31.4

Provision for income taxes
(15.9
)
 
(16.6
)
 
(22.2
)
Income before equity income
35.5

 
31.0

 
9.2

Equity income, net of tax
0.3

 
1.1

 
1.5

Net income
35.8

 
32.1

 
10.7

Net income attributable to noncontrolling interest
(0.2
)
 
(0.4
)
 
(0.3
)
Net income attributable to Global Brass and Copper Holdings, Inc.
$
35.6

 
$
31.7

 
$
10.4

Net income attributable to Global Brass and Copper Holdings, Inc. per common share:
 
 
 
 
 
Basic
$
1.67

 
$
1.50

 
$
0.49

Diluted
$
1.66

 
$
1.49

 
$
0.49

Weighted average common shares outstanding:
 
 
 
 
 
Basic
21.3

 
21.2

 
21.1

Diluted
21.4

 
21.3

 
21.2

Dividends declared per common share
$
0.1500

 
$
0.1500

 
$
0.0375

(a) 2013 includes non-cash profits interest compensation expense of $29.3 million.

The accompanying notes are an integral part of these consolidated financial statements.

65

Table of Contents

Global Brass and Copper Holdings, Inc.
Consolidated Statements of Comprehensive Income
 
 
Year Ended December 31,
(in millions)
2015
 
2014
 
2013
Net income
$
35.8

 
$
32.1

 
$
10.7

Other comprehensive loss:
 
 
 
 
 
Foreign currency translation adjustment
(2.5
)
 
(1.7
)
 
(1.5
)
Income tax benefit on foreign currency translation adjustment
0.7

 
0.6

 
0.6

Comprehensive income
34.0

 
31.0

 
9.8

Comprehensive income attributable to noncontrolling interest
(0.1
)
 
(0.4
)
 
(0.4
)
Comprehensive income attributable to Global Brass and Copper Holdings, Inc.
$
33.9

 
$
30.6

 
$
9.4

The accompanying notes are an integral part of these consolidated financial statements.


66

Table of Contents

Global Brass and Copper Holdings, Inc.
Consolidated Statements of Changes in Equity / (Deficit)
 
(in millions, except share data)
Shares outstanding
 
Common
stock
 
Additional
paid-in
capital
 
Retained earnings / (accumulated
deficit)
 
Treasury
stock
 
Accumulated
other
comprehensive
(loss) income
 
Receivable from stockholder
 
Total
Global Brass
and Copper
Holdings, Inc.
stockholders’
equity/(deficit)
 
Noncontrolling
interest
 
Total
equity/
(deficit)
Balance at December 31, 2012
21,110,000

 
$
0.2

 
$

 
$
(48.2
)
 
$

 
$
1.5

 
$
(4.9
)
 
$
(51.4
)
 
$
3.6

 
$
(47.8
)
Profits interest compensation

 

 
29.3

 

 

 

 

 
29.3

 

 
29.3

Share-based compensation
141,486

 

 
1.2

 

 

 

 

 
1.2

 

 
1.2

Payment from stockholder

 

 

 

 

 

 
4.9

 
4.9

 

 
4.9

Dividends declared

 

 

 
(0.8
)
 

 

 

 
(0.8
)
 

 
(0.8
)
Net income

 

 

 
10.4

 

 

 

 
10.4

 
0.3

 
10.7

Other comprehensive (loss) income, net of tax

 

 

 

 

 
(1.0
)
 

 
(1.0
)
 
0.1

 
(0.9
)
Balance at December 31, 2013
21,251,486

 
$
0.2

 
$
30.5

 
$
(38.6
)
 
$

 
$
0.5

 
$

 
$
(7.4
)
 
$
4.0

 
$
(3.4
)
Share-based compensation
106,316

 

 
1.7

 

 

 

 

 
1.7

 

 
1.7

Exercise of stock options
11,605

 

 
0.1

 

 

 

 

 
0.1

 

 
0.1

Share repurchases
(29,200
)
 

 

 

 
(0.4
)
 

 

 
(0.4
)
 

 
(0.4
)
Excess tax benefit on share-based compensation

 

 
0.2

 

 

 

 

 
0.2

 

 
0.2

Dividends declared

 

 

 
(3.2
)
 

 

 

 
(3.2
)
 

 
(3.2
)
Net income

 

 

 
31.7

 

 

 

 
31.7

 
0.4

 
32.1

Other comprehensive loss, net of tax

 

 

 

 

 
(1.1
)
 

 
(1.1
)
 

 
(1.1
)
Balance at December 31, 2014
21,340,207

 
$
0.2

 
$
32.5

 
$
(10.1
)
 
$
(0.4
)
 
$
(0.6
)
 
$

 
$
21.6

 
$
4.4

 
$
26.0

Share-based compensation
172,678

 

 
4.2

 

 

 

 

 
4.2

 

 
4.2

Exercise of stock options
11,798

 

 
0.1

 

 

 

 

 
0.1

 

 
0.1

Share repurchases
(17,529
)
 

 

 

 
(0.3
)
 

 

 
(0.3
)
 

 
(0.3
)
Excess tax benefit on share-based compensation

 

 
0.1

 

 

 

 

 
0.1

 

 
0.1

Dividends declared

 

 

 
(3.2
)
 

 

 

 
(3.2
)
 

 
(3.2
)
Distribution to noncontrolling interest

 

 

 

 

 

 

 

 
(0.2
)
 
(0.2
)
Net income

 

 

 
35.6

 

 

 

 
35.6

 
0.2

 
35.8

Other comprehensive loss, net of tax

 

 

 

 

 
(1.7
)
 

 
(1.7
)
 
(0.1
)
 
(1.8
)
Balance at December 31, 2015
21,507,154

 
$
0.2

 
$
36.9

 
$
22.3

 
$
(0.7
)
 
$
(2.3
)
 
$

 
$
56.4

 
$
4.3

 
$
60.7

The accompanying notes are an integral part of these consolidated financial statements.

67

Table of Contents

Global Brass and Copper Holdings, Inc.
Consolidated Statements of Cash Flows
 
 
Year Ended December 31,
(in millions)
2015
 
2014
 
2013
Cash flows from operating activities
 
 
 
 
 
Net income
$
35.8

 
$
32.1

 
$
10.7

Adjustments to reconcile net income to net cash provided by operating activities:
 
 
 
 
 
Lower of cost or market adjustment to inventory
6.6

 
0.2

 
0.3

Unrealized (gain) loss on derivatives
(0.6
)
 
3.0

 
(0.2
)
Depreciation
13.5

 
12.2

 
8.5

Amortization of intangible assets
0.1

 
0.1

 
0.1

Amortization of debt issuance costs
2.8

 
2.7

 
2.5

Loss on extinguishment of debt
3.1

 

 

Profits interest compensation expense

 

 
29.3

Share-based compensation expense
4.2

 
1.7

 
1.2

Excess tax benefit from share-based compensation
(0.1
)
 
(0.2
)
 

Provision for bad debts, net of reductions
0.3

 

 
(0.2
)
Deferred income taxes
(7.3
)
 
6.4

 
2.1

Loss on disposal of property, plant and equipment
0.4

 

 

Gain on sale of investment in joint venture
(6.3
)
 

 

Equity earnings, net of distributions
0.1

 
(0.7
)
 
(1.0
)
Change in assets and liabilities:
 
 
 
 
 
Accounts receivable
31.4

 
18.9

 
(7.1
)
Inventories
4.8

 
0.9

 
(16.7
)
Prepaid expenses and other current assets
9.3

 
(7.0
)
 
(9.7
)
Accounts payable
(11.6
)
 
(2.3
)
 
4.5

Accrued liabilities
(3.5
)
 
1.3

 
7.4

Accrued interest
(0.2
)
 
(0.1
)
 

Income taxes, net
5.7

 
(3.8
)
 
(2.7
)
Other, net
0.3

 
(0.9
)
 
(1.0
)
Net cash provided by operating activities
88.8

 
64.5

 
28.0

Cash flows from investing activities
 
 
 
 
 
Capital expenditures
(21.4
)
 
(23.4
)
 
(26.2
)
Proceeds from sale of property, plant and equipment
0.1

 
1.1

 
0.2

Proceeds from sale of investment in joint venture
8.0

 

 

Net cash used in investing activities
(13.3
)
 
(22.3
)
 
(26.0
)
Cash flows from financing activities
 
 
 
 
 
Borrowings on ABL Facility
1.2

 
248.4

 
420.8

Payments on ABL Facility
(1.2
)
 
(253.9
)
 
(429.8
)
Purchases of Senior Secured Notes
(29.7
)
 

 

Premium payment on partial extinguishment of debt
(2.5
)
 

 

Principal payments under capital lease obligation
(1.0
)
 
(0.2
)
 

Dividends paid
(3.2
)
 
(3.2
)
 
(0.8
)
Distribution to noncontrolling interest owner
(0.2
)
 

 

Proceeds from exercise of stock options
0.1

 
0.1

 

Excess tax benefit from share-based compensation
0.1

 
0.2

 

Share repurchases
(0.3
)
 
(0.4
)
 

Net payment from stockholder

 

 
4.9

Net cash used in financing activities
(36.7
)
 
(9.0
)
 
(4.9
)
Effect of foreign currency exchange rates
0.1

 
0.6

 
(0.2
)
Net increase (decrease) in cash
38.9

 
33.8

 
(3.1
)
Cash at beginning of period
44.6

 
10.8

 
13.9

Cash at end of period
$
83.5

 
$
44.6

 
$
10.8

Noncash investing and financing activities
 
 
 
 
 
Purchases of property, plant and equipment not yet paid
$
4.3

 
$
4.1

 
$
4.7

Acquisition of equipment under capital lease obligation
$

 
$
6.0

 
$

Supplemental disclosure of cash flows information
 
 
 
 
 
Cash paid during the period for:
 
 
 
 
 
Interest, net of amount capitalized
$
36.5

 
$
37.0

 
$
37.3

Income taxes, net of refunds
$
17.5

 
$
14.4

 
$
22.9

The accompanying notes are an integral part of these consolidated financial statements.

68

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements



1. Organization and Formation of the Company
Global Brass and Copper Holdings, Inc. (“Holdings,” the “Company,” “we,” “us,” or “our”) was incorporated in Delaware, on October 10, 2007. Holdings, through its wholly-owned principal operating subsidiary, Global Brass and Copper, Inc. (“GBC”), commenced commercial operations on November 19, 2007 through the acquisition of the worldwide metals business from Olin Corporation. In 2013, we completed our initial public offering and the shares of common stock began trading on the New York Stock Exchange on May 23, 2013 under the ticker symbol “BRSS.”
GBC is a leading, value-added converter, fabricator, processor and distributor of specialized non-ferrous products in North America. We are operated and managed through three distinct divisions which are also our reportable segments: GBC Metals, LLC (“Olin Brass”), Chase Brass and Copper Company, LLC (“Chase Brass”) and A.J. Oster, LLC (“A.J. Oster”). We also have a Corporate entity which includes certain administrative costs and expenses and the elimination of intercompany balances.
2. Summary of Significant Accounting Policies
Principles of Consolidation
The consolidated financial statements include the accounts of the Company, our wholly-owned subsidiaries and our majority-owned subsidiaries, in which we hold a controlling interest. All intercompany accounts and transactions are eliminated in consolidation. We use the equity method to account for investments in affiliated companies that are 20% to 50% owned, and in cases where we do not hold a controlling voting interest and do not direct the matters that most significantly impact the investee’s operations.
We own an 80% interest in Olin Luotong (GZ) Corporation (“Olin Luotong Metals” or “OLM”), based in China, and Olin Luotong Metals’ financial information is consolidated herein, with the net results attributable to the 20% noncontrolling interest reflected in the accompanying consolidated financial statements.
Use of Estimates and Assumptions
The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America (“US GAAP”) requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements. In addition, it requires management to make estimates and assumptions that affect the reported amount of net sales and expenses during the reporting period. Actual amounts could differ from those estimates.
Reclassifications

As discussed further below in “Recently Issued and Recently Adopted Accounting Pronouncements”, we elected to early adopt ASU 2015-3 and ASU 2015-17, as defined below, and we have applied the requirements retrospectively to all periods presented in the consolidated balance sheets. A summary of the reclassifications in the consolidated balance sheet as of December 31, 2014 is as follows:


Year Ended December 31, 2014
(in millions)
As previously reported
 
Adjustment
 
As Revised
Current deferred income tax asset
$
30.1

  
$
(30.1
)
 
$

Total current assets
450.5

 
(30.1
)
 
420.4

Noncurrent deferred income tax asset
0.8

  
29.3

  
30.1

Other noncurrent assets
14.7

 
(9.4
)
 
5.3

Total assets
576.5

 
(10.2
)
 
566.3

Noncurrent portion of debt
379.8

 
(9.4
)
 
370.4

Noncurrent deferred income tax liability
0.8

 
(0.8
)
 

Total liabilities
550.5

 
(10.2
)
 
540.3


69

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements


Accounts Receivable and Allowance for Doubtful Accounts
Accounts receivable primarily consists of trade receivables for amounts billed to customers for products sold and other receivables. The determination of collectibility of our accounts receivable requires management to make frequent judgments and estimates in order to determine the appropriate allowance needed for doubtful accounts. In circumstances where we are aware of a customer’s inability to meet its financial obligations (e.g., bankruptcy filings or substantial down-grading of credit ratings), we record an allowance for bad debts equal to the amount we believe is not collectible. For all other customers, we recognize allowances for bad debts based on historical collection experience. If circumstances change (e.g., greater than expected defaults or an unexpected material change in a major customer’s ability to meet its financial obligations), the estimate of the allowance could change by a material amount. Accounts are written off once deemed to be uncollectible.
Inventories
Inventories include costs attributable to direct labor and manufacturing overhead but are primarily comprised of metal costs. The metals component of inventories that is valued on a last-in, first-out (“LIFO”) basis comprised approximately 70% of total inventory at both December 31, 2015 and 2014. Other manufactured inventories, including the direct labor and manufacturing overhead components and certain non-U.S. inventories, are valued on a first-in, first-out (“FIFO”) basis. In addition to the cost of material, finished goods inventory includes costs for depreciation, utilities, consumable production supplies, maintenance, production wages and transportation.
Inventories are stated at the lower of cost or market. The market price of metals used in production and related scrap is subject to volatility. We evaluate the need to record adjustments for inventory on a regular basis. During periods when open market prices decline below carrying value, we record a provision to reduce the carrying value of inventory. Additionally, we record an estimate for slow moving and obsolete inventory based upon product knowledge, physical inventory observation, future demand, market conditions and an aging analysis of the inventory on hand. Our policy is to evaluate all inventories including raw material, work-in-process, finished goods, and spare parts. Inventory in excess of estimated usage requirements is written down to its estimated net realizable value.
Property, Plant and Equipment
Property, plant and equipment are recorded at cost. Depreciation of property, plant and equipment, which includes the depreciation of assets under capital leases, is computed using the straight-line method based on the estimated useful lives of the assets as they are placed into service. Property, plant and equipment are generally depreciated over the useful lives, which are detailed in the notes to the accompanying consolidated financial statements. Depreciation expense is recorded in cost of sales or selling, general and administrative costs depending on the nature and use of the underlying asset.
Expenditures for repairs and maintenance are expensed as incurred. Expenditures which improve an asset or extend its estimated useful life are capitalized. Interest costs related to the construction of qualifying assets are capitalized as part of the construction costs. When assets are retired or otherwise disposed of, the related cost and accumulated depreciation are removed from the accounts and any gain or loss is included in the accompanying consolidated statements of operations.
We review property, plant and equipment for impairment when a change in events or circumstances indicates that the carrying value of the assets may not be recoverable. We determine the fair value of our asset group through various valuation techniques, including discounted cash flow models, quoted market values and third-party independent appraisals, as considered necessary.
Acquisitions and Goodwill
All acquisitions are accounted for using the acquisition method as prescribed by ASC 805, Business Combinations. The purchase price paid is allocated to the assets acquired and liabilities assumed based on their estimated fair values. Any excess purchase price over the fair value of the net assets acquired is recorded as goodwill.
Goodwill is not amortized but is tested for impairment annually and whenever events or changes in circumstances indicate that impairment may have occurred. Management performs its annual goodwill impairment test as of October 31 and monitors for interim triggering events on an ongoing basis.

70

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements


We utilized the qualitative goodwill evaluation model for our annual goodwill impairment test conducted as of October 31, 2015. Based on the results of that qualitative assessment, we believe it was more likely than not that the fair value of the reporting units exceeded their carrying values as of October 31, 2015, indicating no impairment of goodwill. 
Intangible Assets
Definite-lived intangible assets are recorded at fair value under the purchase method of accounting as of the respective acquisition dates and are amortized using the straight-line method over the estimated useful lives of the assets. Amortization expense related to intangible assets is reflected in selling, general and administrative expenses. Identifiable definite-lived intangible assets are reviewed for impairment whenever events or circumstances indicate that the carrying value may not be recoverable. We do not have any indefinite-lived intangible assets as of December 31, 2015 and 2014. Accumulated amortization was $1.2 million and $1.1 million as of December 31, 2015 and December 31, 2014, respectively.  Annual amortization expense is expected to be $0.1 million for each of the next five years.
Deferred Financing Fees
Deferred financing fees incurred in connection with the issuance of debt are amortized as non-cash interest expense over the terms of the debt agreements. The unamortized balances of deferred financing fees incurred in connection with the issuance of the Senior Secured Notes and the ABL facility, as defined in Note 11, “Financing,” are presented in noncurrent portion of debt and other noncurrent assets in the consolidated balance sheets, respectively.
Deferred financing fees incurred in connection with the issuance of the Senior Secured Notes, as defined in Note 11, “Financing,” are amortized using the effective interest method over the term of the Senior Secured Notes. Deferred financing fees incurred in connection with the issuance of the ABL Facility are amortized on a straight-line basis over the term of the ABL Facility.
Derivative Contracts
Our operating activities expose us to a variety of market risks, including risks related to the effects of commodity prices and interest rates. We monitor and manage these financial exposures as an integral part of our overall risk-management program. We do not enter into derivative contracts for speculation purposes where the objective is to generate profits. We have not applied hedge accounting to our derivative contracts in 2015, 2014 or 2013. We include the fair value of the derivative contracts as assets or liabilities in our consolidated balance sheet and recognize all amounts paid and received and changes in fair value of derivative contracts, including unrealized gains and losses, as adjustments to income in the accompanying consolidated statements of operations.
Treasury Stock
Our Board of Directors has not enacted a program to purchase our common stock in the open market. However, management periodically purchases shares of our common stock from employees as part of equity-based compensation programs. These repurchases are reflected at cost within treasury stock in the consolidated balance sheets.
Revenue Recognition
We recognize revenue when title and risk of loss are transferred to customers, which is generally the date products are shipped. Estimates for future rebates on certain product lines and product returns are recognized in the period in which the revenue is recorded. Such rebates were not material for 2015, 2014 or 2013. Billings to customers for shipping costs are included in net sales and the cost of shipping product to those customers is reflected in cost of sales in the accompanying consolidated statements of operations.
In connection with sales of unprocessed metal to toll customers, we record deferred expense and deferred revenue in prepaid expenses and other current assets and in accrued liabilities, respectively, in the consolidated balance sheets. The unprocessed metal is held for the account of the toll customers at our premises, together with our other inventory. Deferred expense represents the deferral of cost of sales and deferred revenue represents the deferral of sales revenue, in each case, associated with such sales of unprocessed metal to toll customers. We defer the expense for such unprocessed metal sales (and the corresponding revenue from sales of unprocessed metal) to toll customers until the finished product has been manufactured and shipped, at which time risk of loss and title passes to the customer.

71

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements


Research and Development
We conduct research and development primarily through our Olin Brass reportable segment, the costs for which are expensed as incurred. Research and development expenditures for 2015, 2014 and 2013 were $1.3 million, $1.6 million and $1.5 million, respectively, and are included as a component of selling, general and administrative expenses in the accompanying consolidated statements of operations.
Provision for Income Taxes
The provision for income taxes is determined using the asset and liability approach. The current and deferred tax consequences are measured by applying the provisions of enacted tax laws to determine the amount of taxes payable currently or in future years. Deferred income taxes are provided for temporary differences between the income tax basis of assets and liabilities and their carrying amounts for financial reporting purposes. A valuation allowance is recorded to reduce deferred tax assets when management determines it is “more likely than not” that some portion or all of the deferred tax assets will not be realized.
Foreign Currency Translation
The financial statements of foreign subsidiaries are translated into United States dollars in accordance with ASC 830, Foreign Currency Matters. The functional currency of our foreign subsidiaries is the local currency. The consolidated statements of foreign operations are translated at weighted-average exchange rates for the periods. Assets and liabilities are translated at period-end exchange rates and equity transactions are translated at historical rates. Gains and losses resulting from the translation adjustment are reported as a component of other comprehensive income (loss). The income tax effect of currency translation adjustments related to foreign subsidiaries and joint ventures that are not considered indefinitely reinvested are recorded as a component of deferred taxes with an offset to other comprehensive income (loss).
Concentrations of Credit Risk and Certain Other Exposures
We sell and distribute our products to a wide range of companies primarily in the building and housing, munitions, automotive, transportation, coinage, electronics / electrical components and industrial machinery and equipment markets. We perform ongoing credit evaluations of our customers and generally do not require collateral. In 2015 and 2013, sales to one major customer amounted to 12% and 10% of net sales, respectively. In 2014, no customer represented 10% or more of consolidated net sales.
We use various strategies to minimize the impact of changes in the base metal prices between the date of order from a customer and the date of sale to a customer. Generally, we price a forward replacement purchase of an equivalent amount of copper and other metals under flexible pricing arrangements with our suppliers, at the same time we determine the forward selling price of finished products to our customers. We have various sources of raw materials and are not materially dependent on any one supplier.
As of December 31, 2015, approximately 61% of our employees at various sites were members of unions. Generally, our various agreements with unions in the United States have contractual terms which range from 1 to 5 years. Since our establishment in November 2007, we have not experienced any work stoppages at any of our facilities.
We are required to make contributions to the IAM National Pension Plan (“IAM Plan”), a multi-employer pension plan that covers certain of our union employees. Our obligations may be impacted by the funded status of the plan, the plan’s investment performance, changes in the participant demographics, financial stability of contributing employers and changes in actuarial assumptions. In addition, if a participating employer becomes insolvent and ceases to contribute to a multiemployer plan, the unfunded obligation of the plan will be borne by the remaining participating employers. Under current law, an employer that withdraws or partially withdraws from a multi-employer pension plan may incur withdrawal liability to the plan. Given that the IAM Plan is over funded, many other participating employers are much larger than us and there are a large number of participating employers in the plan, we do not view this to be a significant risk.
Self-Insurance Programs
We are self-insured for workers’ compensation claims and benefits paid under employee health care programs. Accruals for employee health care are primarily based on estimated undiscounted cost of claims, which includes incurred but not reported claims. Accruals for workers’ compensation benefits and related expenses for claims are estimated, in part, by considering historical claims experience and undiscounted claims estimates provided by insurance carriers, third-party

72

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements


administrators and actuaries. Self-insurance accruals are deemed to be sufficient to cover outstanding claims, including those incurred but not reported as of the estimation date.
Environmental Reserves and Environmental Expenses
We recognize an environmental liability when it is probable the liability exists and the amount is reasonably estimable. We estimate the duration and extent of our remediation obligations based upon internal analyses of clean-up costs, ongoing monitoring costs and estimated legal fees, communications with regulatory agencies and changes in environmental law. If we were to determine that our estimates of the duration or extent of environmental obligations were no longer accurate, we would adjust our environmental liabilities accordingly in the period that such determination is made. Estimated future expenditures for environmental remediation are not discounted to their present value. Accrued environmental liabilities are not reduced by potential insurance reimbursements.
Environmental expenses that relate to ongoing operations are included as a component of cost of sales in the accompanying consolidated statement of operations.
Recently Issued and Recently Adopted Accounting Pronouncements
In February 2016, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) No. 2016-2, Leases (Topic 842) (“ASU 2016-2”). ASU 2016-2 sets out the principles for the recognition, measurement, presentation and disclosure of leases for both parties to a contract (i.e. lessees and lessors). The new standard requires lessees to apply a dual approach, classifying leases as either finance or operating leases based on the principle of whether or not the lease is effectively a financed purchase by the lessee. This classification will determine whether lease expense is recognized based on an effective interest method or on a straight line basis over the term of the lease, respectively. A lessee is also required to record a right-of-use asset and a lease liability for all leases with a term of greater than 12 months regardless of their classification. Leases with a term of 12 months or less will be accounted for similar to existing guidance for operating leases today. ASU 2016-2 supersedes the existing guidance on accounting for leases in “Leases (Topic 840).” The provisions of ASU 2016-2 are effective for fiscal years, and interim reporting periods within those fiscal years, beginning after December 15, 2018. Early adoption is permitted and the provisions are to be applied using a modified retrospective approach. We are in the process of evaluating the impact of adoption on our consolidated financial statements.
In January 2016, the FASB issued ASU No. 2016-1, Financial Instruments— Overall (Subtopic 825-10): Recognition and Measurement of Financial Assets and Financial Liabilities (“ASU 2016-1”). ASU 2016-1 requires equity investments (except those accounted for under the equity method of accounting, or those that result in consolidation of the investee) to be measured at fair value with changes in fair value recognized in net income, requires public business entities to use the exit price notion when measuring the fair value of financial instruments for disclosure purposes, requires separate presentation of financial assets and financial liabilities by measurement category and form of financial asset, and eliminates the requirement for public business entities to disclose the method(s) and significant assumptions used to estimate the fair value that is required to be disclosed for financial instruments measured at amortized cost. ASU 2016-1 is effective for fiscal years, and interim reporting periods within those fiscal years, beginning after December 15, 2017. We do not expect adoption of this standard to have a material effect on our consolidated financial statements.
In November 2015, the FASB issued ASU No. 2015-17, Income Taxes (Topic 740): Balance Sheet Classification of Deferred Taxes (“ASU 2015-17”). ASU 2015-17 requires that all deferred tax assets and liabilities, along with any related valuation allowance, be classified as noncurrent on the balance sheet. As a result, each tax jurisdiction will now only have one net noncurrent deferred tax asset or liability. ASU 2015-17 is effective for fiscal years, and interim periods within those years, beginning after December 15, 2016. Early adoption is permitted and the standard may be applied either retrospectively or on a prospective basis to all deferred tax assets and liabilities. We have early adopted this standard and have applied the requirements retrospectively to all periods presented.
In September 2015, the FASB issued ASU 2015-16, Business Combinations (Topic 805): Simplifying the Accounting for Measurement-Period Adjustments (“ASU 2015-16”).  ASU 2015-16 requires that an acquirer recognize adjustments to provisional amounts that are identified during the measurement period in the reporting period in which the adjustment amounts are determined. ASU 2015-16 is effective for fiscal years, and interim reporting periods within those fiscal years, beginning after December 15, 2015. We do not expect the adoption of this standard to have a material effect on our consolidated financial statements.

73

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements


In July 2015, the FASB issued ASU No. 2015-11, Inventory (Topic 330): Simplifying the Measurement of Inventory (“ASU 2015-11”). ASU 2015-11 simplifies the guidance on the subsequent measurement of inventory, excluding inventory measured using LIFO or the retail inventory method. Under the new standard, in scope inventory, which includes inventory that is measured using FIFO or average cost, should be measured at the lower of cost and net realizable value. Prior to the issuance of the standard, inventory was measured at the lower of cost or market (where market was defined as replacement cost, with a ceiling of net realizable value and floor of net realizable value less a normal profit margin).  The new standard is effective for interim and annual periods beginning after December 15, 2016, with early adoption permitted. We are in the process of evaluating the impact of adoption on our consolidated financial statements.
In April 2015, the FASB issued ASU No. 2015-3, Interest — Imputation of Interest (Subtopic 835-30): Simplifying the Presentation of Debt Issuance Costs (“ASU 2015-3”), which requires that debt issuance costs related to a recognized debt liability be presented in the balance sheet as a direct deduction from the carrying amount of that debt liability, consistent with debt discounts. ASU 2015-3 is effective for financial statements issued for fiscal years beginning after December 15, 2015, and interim periods within those fiscal years, with early adoption permitted. ASU 2015-3 requires retrospective adoption. We have early adopted ASU 2015-3 and have applied the requirements retrospectively to all periods presented.
In August 2015, the FASB issued ASU No. 2015-15, Interest – Imputation of Interest (Subtopic 835-30), Presentation and Subsequent Measurement of Debt Issuance Costs Associated with Line-of-Credit Arrangements (“ASU 2015-15”).  ASU 2015-15 provides additional guidance to ASU 2015-3, which did not address presentation or subsequent measurement of debt issuance costs related to line-of-credit arrangements. ASU 2015-15 noted that the Securities and Exchange Commission (“SEC”) staff would not object to an entity deferring and presenting debt issuance costs as an asset and subsequently amortizing the deferred debt issuance costs ratably over the term of the line-of-credit arrangement, regardless of whether there are any outstanding borrowings on the line-of-credit arrangement.  We have adopted ASU 2015-15 and we continue to classify the debt issuance costs related to our line-of-credit arrangement as an asset and we continue to amortize them ratably over the term of the arrangement.
In May 2014, the FASB issued ASU No. 2014-9, Revenue from Contracts with Customers (Topic 606) (“ASU 2014-9”). The guidance provides companies with a single model for use in accounting for revenue arising from contracts with customers and supersedes current revenue recognition guidance, including industry-specific revenue guidance. In August 2015, the FASB issued ASU No. 2015-14, Revenue From Contracts With Customers (Topic 606): Deferral of the Effective Date (“ASU 2015-14”), which is an amendment to ASU 2014-9 and defers its effective date by one year to interim and annual reporting periods beginning after December 15, 2017. It permits early adoption of the standard, but not before the original effective date of December 15, 2016. The guidance permits companies to either apply the requirements retrospectively to all prior periods presented, or apply the requirements in the year of adoption, through a cumulative adjustment. We are in the process of evaluating the impact of adoption on our consolidated financial statements.
3. Earnings Per Share
Basic earnings per share is computed based on the weighted-average number of common shares outstanding and diluted earnings per share is computed based on the weighted-average number of common shares outstanding adjusted by the number of additional shares that would have been outstanding had potentially dilutive common shares been issued. Potentially dilutive securities include nonvested share awards and stock options for which the exercise price was less than the average market price of our outstanding common stock. Nonvested performance-based share awards are included in the average diluted shares outstanding for each period if established performance criteria have been met at the end of the respective periods.

74

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements


The following table sets forth the computation of basic and diluted earnings per share:
 
Year Ended December 31,
(in millions, except per share data)
2015
 
2014
 
2013
Numerator
 
 
 
 
 
Net income attributable to Global Brass and Copper Holdings, Inc.
$
35.6

 
$
31.7

 
$
10.4

Denominator
 
 
 
 
 
Weighted-average common shares outstanding
21.3

 
21.2

 
21.1

Effect of potentially dilutive securities:
 
 
 
 
 
Stock options and nonvested share awards
0.1

 
0.1

 
0.1

Weighted-average common shares outstanding, assuming dilution
21.4

 
21.3

 
21.2

Net income attributable to Global Brass and Copper Holdings, Inc. per common share:
 
 
 
 
 
Basic
$
1.67

 
$
1.50

 
$
0.49

Diluted
$
1.66

 
$
1.49

 
$
0.49

The computation of weighted-average common shares outstanding, assuming dilution, for the periods presented, includes the average common shares outstanding that would result from the assumed exercise of outstanding stock options and vesting of restricted stock awards and vesting of the portion of performance-based shares for which the established performance criterion has been met. Weighted-average common shares outstanding, assuming dilution, for 2014 and 2013 excluded 147,136 shares and 3,451 shares awarded under our equity incentive plan, respectively, because they were anti-dilutive. There were no anti-dilutive securities in 2015.
4. Segment Information
Our Chief Operating Decision Maker allocates resources and evaluates performance at the divisional level. As such, we have determined that we have three reportable segments: Olin Brass, Chase Brass and A.J. Oster.
Olin Brass is a leading manufacturer, fabricator and converter of non-ferrous products, including sheet, strip, foil tube and fabricated products. Olin Brass also rerolls and forms other alloys such as stainless steel, carbon steel and aluminum. Sheet and strip is generally manufactured from copper and copper-alloy scrap. Olin Brass’s products are used in five primary markets: building and housing, munitions, automotive, coinage, and electronics / electrical components.
Chase Brass is a leading manufacturer of brass rod in North America. Chase Brass primarily manufactures rod in round and other shapes, ranging from 1/4 inch to 4.5 inches in diameter. The key attributes of brass rod include its machinability, corrosion resistance and moderate strength, making it especially suitable for forging and machining products such as valves and fittings. Brass rod is generally manufactured from copper or copper-alloy scrap. Chase Brass produces brass rod used in production applications which can be grouped into four primary markets: building and housing, transportation, electronics / electrical components and industrial machinery and equipment.
A.J. Oster primarily processes and distributes copper and copper-alloy sheet, strip and foil through six strategically-located service centers in the United States, Puerto Rico and Mexico. Each A.J. Oster service center reliably provides a broad range of high quality products at quick lead-times in small quantities. These capabilities, combined with A.J. Oster’s operations of precision slitting, hot tinning, traverse winding, cutting, edging, stamping and special packaging, provide value to a broad customer base. A.J. Oster’s products are used in three primary markets: building and housing, automotive and electronics / electrical components.
Corporate includes compensation for corporate executives and officers, corporate office and administrative salaries, and professional fees for accounting, tax and legal services. Corporate also includes interest expense, state and Federal income taxes, overhead costs, share-based compensation expense, costs related to other long-term incentive programs, gains and losses associated with certain acquisitions and dispositions and the elimination of intercompany balances and transactions.
The Chief Operating Decision Maker evaluates performance and determines resource allocations based on a number of factors, the primary performance measure being adjusted EBITDA.

75

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements


Adjusted EBITDA is earnings before interest, taxes, depreciation and amortization (“EBITDA”) adjusted to exclude the following:
unrealized gains and losses on derivative contracts in support of our balanced book approach;
unrealized gains and losses associated with derivative contracts related to energy and utility costs;
non-cash losses due to lower of cost or market adjustments to inventory;
non-cash gains and losses due to the depletion of a LIFO layer of metal inventory;
non-cash profits interest compensation expense related to payments made to certain members of our management by Halkos Holdings, LLC (“Halkos”), the sole stockholder of the Company prior to the initial public offering (“IPO”);
share-based compensation expense;
loss on extinguishment of debt;
non-cash income accretion related to Dowa Olin Metal Corporation (the “Dowa Joint Venture”);
management fees paid to affiliates of KPS Capital Partners, L.P. (“KPS”), the majority shareholders of Halkos;
restructuring and other business transformation charges;
specified legal and professional expenses; and
certain other items.
Each of these items are excluded because our management believes they are not indicative of the ongoing performance of our core operations.

76

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements


Below is a reconciliation of adjusted EBITDA of operating segments to income before provision for income taxes and equity income:
 
Year Ended December 31,
(in millions)
2015
 
2014
 
2013
Net Sales, External Customers
 
 
 
 
 
Olin Brass
$
670.5

 
$
794.2

 
$
820.5

Chase Brass
542.5

 
603.6

 
622.0

A.J. Oster
293.2

 
313.6

 
316.0

Total net sales, external customers
$
1,506.2

 
$
1,711.4

 
$
1,758.5

Intersegment Net Sales
 
 
 
 
 
Olin Brass
$
51.4

 
$
53.6

 
$
53.6

Chase Brass
1.6

 
0.1

 

A.J. Oster
0.1

 
0.3

 
0.2

Total intersegment net sales
$
53.1

 
$
54.0

 
$
53.8

Adjusted EBITDA
 
 
 
 
 
Olin Brass
$
48.3

 
$
36.9

 
$
48.3

Chase Brass
68.9

 
69.2

 
67.2

A.J. Oster
15.8

 
16.2

 
16.9

Total adjusted EBITDA of operating segments
133.0

 
122.3

 
132.4

Corporate
(11.9
)
 
(12.6
)
 
(14.4
)
Depreciation expense
(13.5
)
 
(12.2
)
 
(8.5
)
Amortization of intangible assets
(0.1
)
 
(0.1
)
 
(0.1
)
Interest expense
(39.1
)
 
(39.6
)
 
(39.8
)
Net income attributable to noncontrolling interest
0.2

 
0.4

 
0.3

Unrealized gain (loss) on derivative contracts (a)
0.6

 
(3.0
)
 
0.2

LIFO liquidation (loss) gain (b)
(0.1
)
 
(0.6
)
 
2.0

Loss on extinguishment of debt (c)
(3.1
)
 

 

Equity method investment income (d)
(0.1
)
 
(0.4
)
 
(0.8
)
Non-cash Halkos profits interest compensation expense (e)

 

 
(29.3
)
Management fees (f)

 

 
(4.8
)
Specified legal / professional expenses (g)
(2.8
)
 
(4.3
)
 
(4.3
)
Lower of cost or market adjustment to inventory (h)
(6.6
)
 
(0.2
)
 
(0.3
)
Share-based compensation expense (i)
(4.2
)
 
(1.7
)
 
(1.2
)
Restructuring and other business transformation charges (j)
(0.9
)
 
(0.4
)
 

Income before provision for income taxes and equity income
$
51.4

 
$
47.6

 
$
31.4

(a)
Represents unrealized gains and losses on derivative contracts.
(b)
Calculated based on the difference between the base year LIFO carrying value and the metal prices prevailing in the market at the time of inventory depletion.
(c)
Represents the loss on extinguishment of debt recognized in connection with the open market purchases of our Senior Secured Notes.
(d)
Excludes accretion income of $0.2 million, $0.7 million and $0.7 million for 2015, 2014 and 2013, respectively. Equity method investment income is exclusive to Olin Brass. In 2015, we sold our investment in the Dowa Joint Venture.
(e)
The 2013 amount includes $20.4 million that represents incremental non-cash compensation as a result of the modification made to the Halkos Holdings, LLC Executive Equity Incentive Plan to eliminate Halkos’ right to acquire all or a portion of the non-voting membership interests granted to certain members of management for less than fair market value upon certain conditions. The 2013 amount also includes $8.9 million that represents dividend payments made by Halkos to

77

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements


members of the Company’s management that resulted in a non-cash compensation charge in connection with the IPO that occurred in May 2013. Halkos was our sole stockholder prior to the IPO.
(f)
The 2013 amount represents an early termination fee equal to the value of the advisory fee that would have otherwise been payable to affiliates of KPS, as well as a portion of the annual advisory fees paid to affiliates of KPS prior to the May 2013 IPO. KPS are the majority shareholders of Halkos.
(g)
Represents selected professional fees for accounting, tax, legal and consulting services incurred as a public company that exceed our expected long-term requirements.
(h)
Represents non-cash lower of cost or market charges for the write down of domestic, non-copper metal inventory.
(i)
Represents compensation expense resulting from stock compensation awards to certain employees and our Board of Directors.
(j)
Restructuring and other business transformation charges in 2015 and 2014 represent severance charges at Olin Brass.

 
Year Ended December 31,
(in millions)
2015
 
2014
 
2013
Depreciation and amortization
 
 
 
 
 
Olin Brass
$
8.6

 
$
7.9

 
$
5.0

Chase Brass
4.3

 
3.6

 
3.0

A.J. Oster
0.4

 
0.5

 
0.3

Corporate
0.3

 
0.3

 
0.3

Total depreciation and amortization
$
13.6

 
$
12.3

 
$
8.6

 
 
 
 
 
 
LIFO liquidation (loss)/gain
 
 
 
 
 
Olin Brass
$
0.1

 
$
(1.5
)
 
$
0.1

Chase Brass

 

 
1.9

A.J. Oster
(1.0
)
 

 

Corporate
0.8

 
0.9

 

Total LIFO liquidation (loss)/gain
$
(0.1
)
 
$
(0.6
)
 
$
2.0

 
 
 
 
 
 
Interest expense
 
 
 
 
 
Olin Brass
$
0.4

 
$
0.3

 
$

Corporate
38.7

 
39.3

 
39.8

Total interest expense
$
39.1

 
$
39.6

 
$
39.8

 
 
 
 
 
 
Capital expenditures
 
 
 
 
 
Olin Brass
$
10.0

 
$
16.9

 
$
18.3

Chase Brass
8.0

 
5.3

 
7.2

A.J. Oster
3.4

 
1.1

 
0.6

Corporate

 
0.1

 
0.1

Total capital expenditures
$
21.4

 
$
23.4

 
$
26.2

 
As of December 31,
(in millions)
2015
 
2014
Total Assets
 
  
 
Olin Brass
$
228.6

  
$
258.2

Chase Brass
116.6

  
125.6

A.J. Oster
90.2

  
92.0

Corporate
121.8

  
90.5

Total assets
$
557.2

 
$
566.3


78

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements


Summarized geographic information is shown in the following table. Net sales are attributed to individual countries based on the location from which the products are shipped.
 
Year Ended December 31,
(in millions)
2015
 
2014
 
2013
Net sales:
 
 
 
 
 
United States
$
1,421.5

  
$
1,613.9

  
$
1,660.1

Asia Pacific
41.1

  
50.6

  
56.5

Mexico
43.6

  
46.9

  
41.9

Total net sales
$
1,506.2

  
$
1,711.4

  
$
1,758.5

Substantially all long-lived assets are maintained in the United States.
In 2015, net sales to one Olin Brass customer amounted to $185.5 million, which represents 12% of our consolidated net sales for 2015. In 2013, net sales to a different Olin Brass customer amounted to $182.4 million, which represents 10% of our consolidated net sales to external customers for 2013. No customer represented 10 percent or more of consolidated revenues in 2014.
5. Inventories
Inventories were as follows:
 
As of December 31,
(in millions)
2015
 
2014
Raw materials and supplies
$
31.3

 
$
29.7

Work-in-process
69.7

 
78.7

Finished goods
75.3

 
80.6

Total inventories
$
176.3

 
$
189.0

During 2015, 2014 and 2013, we reduced the recorded value of certain domestic, non-copper metal inventory by $6.6 million, $0.2 million and $0.3 million, respectively, resulting from the decline in market value of these metals. These non-cash, lower of cost or market adjustments were recorded in cost of sales in the accompanying consolidated statements of operations.
During 2015, 2014 and 2013, certain domestic metal inventory quantities were reduced resulting in a liquidation of LIFO inventory layers. The effect of this reduction of inventory increased cost of sales by $0.1 million and $0.6 million in 2015 and 2014, respectively, and decreased cost of sales by $2.0 million in 2013.
Below is a summary of inventories valued at period-end market values compared to the as reported values.
 
As of December 31,
(in millions)
2015
 
2014
Market value
$
213.1

 
$
280.1

As reported
176.3

 
189.0

Excess of market over reported value
$
36.8

 
$
91.1


79

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements


6. Prepaid Expenses and Other Current Assets
Prepaid expenses and other current assets were as follows:
 
As of December 31,
(in millions)
2015
 
2014
Workers’ compensation plan deposits
$
6.0

 
$
6.2

Deferred cost of sales - toll customers
4.0

 
12.7

Prepaid insurance
2.0

 
2.8

Derivative contract assets
1.8

 
1.3

Prepaid tooling
0.5

 
1.2

Other
3.1

 
2.0

Total prepaid expenses and other current assets
$
17.4

 
$
26.2

7. Property, Plant and Equipment
Property, plant and equipment balances, including assets under capital lease, were as follows:
 
As of December 31,
 
Useful Life
(in years)
(in millions)
2015
 
2014
 
Land improvements
$
2.9

 
$
2.9

 
12 - 20
Buildings and building improvements
18.8

 
17.2

 
20 - 50
Machinery and equipment
100.6

 
87.8

 
10 - 12
Information technology
11.6

 
8.5

 
3 - 5
Motor vehicles
6.8

 
7.1

 
5
Leasehold improvements
1.1

 
0.7

 
 
Construction-in-process
17.0

 
14.4

 
 
Gross property, plant and equipment
158.8

 
138.6

 
 
Accumulated depreciation
(47.7
)
 
(35.1
)
 
 
Property, plant and equipment, net
$
111.1

 
$
103.5

 
 
Leasehold improvements are amortized over the lesser of their useful lives or the remaining lease term.
We capitalized interest relating to the construction of long-term assets in the amount of $0.2 million in 2015, $0.2 million in 2014 and $0.1 million in 2013.
See Note 11, “Financing,” to the accompanying consolidated financial statements for further information regarding the capital lease.
8. Investment in Joint Venture
During 2015, 2014 and 2013, we received cash dividends from the Dowa Joint Venture of $0.4 million, $0.4 million and $0.5 million, respectively, which were recorded as a reduction in our investment in the Dowa Joint Venture.
In April 2015, we sold our 50% share of the Dowa Joint Venture to our joint venture partner, DOWA Metaltech Co. Ltd. for $8.0 million. Thus, we no longer own any portion of the Dowa Joint Venture. During 2015, we recognized a gain of $6.3 million and related tax expense of $1.5 million on the sale.

80

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements


9. Other Noncurrent Assets
Other noncurrent assets consisted of the following: 
 
As of December 31,
(in millions)
2015
 
2014
Deferred financing fees, net - ABL Facility
$
1.5

 
$
2.5

Utility and other deposits
1.4

 
1.4

Other
1.1

 
1.4

Total other noncurrent assets
$
4.0

 
$
5.3

10. Accrued Liabilities
Accrued liabilities consisted of the following:
 
As of December 31,
(in millions)
2015
 
2014
Compensation and benefits
$
23.8

 
$
18.1

Workers’ compensation
13.3

 
14.2

Deferred sales revenue - toll customers
4.0

 
12.7

Insurance
2.6

 
2.5

Professional fees
2.5

 
2.1

Utilities
1.6

 
1.5

Taxes
1.3

 
1.7

Tooling
0.5

 
0.8

Other
4.3

 
3.7

Total accrued liabilities
$
53.9

 
$
57.3

11. Financing
Long-term debt consisted of the following:
 
As of December 31,
(in millions)
2015
 
2014
Senior Secured Notes
$
345.3

 
$
375.0

Deferred financing fees, net - Senior Secured Notes
(7.0
)
 
(9.4
)
Obligations under capital lease
4.8

 
5.8

Total debt
343.1

 
371.4

Current portion of capital lease obligations
(1.1
)
 
(1.0
)
Noncurrent portion of debt
$
342.0

 
$
370.4

Senior Secured Notes
We have $345.3 million of senior secured notes outstanding that mature on June 1, 2019 (the “Senior Secured Notes”) and that are guaranteed by Holdings. The Senior Secured Notes are secured by a senior-priority security interest in our fixed assets (which secure the ABL Facility, hereinafter defined, on a junior-priority basis) and by a junior-priority security interest in our accounts receivable and inventory (which secure our ABL Facility on a senior-priority basis).  Interest on the Senior Secured Notes accrues at the rate of 9.50% per annum and is payable semiannually in arrears on June 1 and December 1.

81

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements


During the year ended December 31, 2015, we purchased in the open market an aggregate of $29.7 million principal amount of our Senior Secured Notes for an aggregate purchase price of $32.2 million, plus accrued interest. As a result of these purchases, we recognized a loss on the extinguishment of debt of $3.1 million, which includes a premium of $2.5 million and the write-off of $0.6 million of unamortized debt issuance costs.
Subsequent to December 31, 2015, we purchased in the open market an aggregate of $31.0 million principal amount of our Senior Secured Notes for an aggregate purchase price of $32.9 million, plus accrued interest. We expect to recognize a loss on the extinguishment of debt of $2.5 million related to these purchases in the first quarter of 2016, which includes a premium of $1.9 million and the write-off of $0.6 million of unamortized debt issuance costs.
The credit agreement governing the ABL Facility (hereinafter defined) and the indenture governing the Senior Secured Notes (the “Indenture”) limit the ability of GBC and its subsidiaries to pay dividends or distribute cash to Holdings and to its equityholders, although ordinary course dividends and distributions to meet the limited holding company expenses and related obligations at Holdings of up to $5.0 million per year are permitted under those agreements. Under the terms of the Indenture, GBC is also permitted to pay dividends or distribute to Holdings and its equityholders up to 50% of its “Consolidated Net Income” (as such term is used in the Indenture) from April 1, 2012 to the end of GBC’s most recently ended fiscal quarter. As of December 31, 2015, all of the net assets of the subsidiaries are restricted except for $79.8 million, which are permitted for dividend distributions under the Indenture. As of December 31, 2015, we were in compliance with all of the covenants relating to the Indenture.
GBC is required to offer to redeem the Senior Secured Notes at a purchase price of 101% of their principal amount (plus accrued interest) upon the occurrence of certain change of control events. In addition, upon the completion of certain asset dispositions, GBC may be required to offer to redeem the Senior Secured Notes at a purchase price of 100% of their principal amount (plus accrued and unpaid interest) if it does not apply the proceeds of such asset dispositions in accordance with the indenture by certain specified deadlines.
On and after June 1, 2016, GBC may redeem the Senior Secured Notes at its option at the following redemption prices (expressed as a percentage of principal amount), plus accrued interest and additional interest, if any, if redeemed during the 12-month period commencing on June 1 of the years set forth below:
Period
Redemption Price
2016
104.750
%
2017
102.375
%
2018 and thereafter
100.000
%
Prior to June 1, 2016, GBC may redeem some or all of the Senior Secured Notes at a redemption price equal to 100% of the principal amount of the Senior Secured Notes redeemed plus the applicable premium (as defined in the Indenture), and accrued and unpaid interest.
ABL Facility
Our asset-based revolving loan facility (the “ABL Facility”) provides for borrowings of up to the lesser of $200.0 million or the borrowing base, in each case, less outstanding loans and letters of credit. Available borrowings under the ABL Facility were $196.9 million as of December 31, 2015 and $199.5 million as of December 31, 2014.
As of December 31, 2015 and 2014, amounts outstanding, if any, under the ABL Facility accrued interest at a rate of 4.25%. Unused amounts under the ABL Facility incur an unused line fee of 0.50% per annum, payable in full on a quarterly basis.
The ABL Facility has an expiration date of June 1, 2017 and contains various debt covenants to which we are subject on an ongoing basis. As of December 31, 2015, we were in compliance with all of the covenants under the ABL Facility.
Capital Lease Obligations
During 2014, we incurred capital lease obligations related to the acquisition of certain assets. As of December 31, 2015, assets recorded under capital lease obligations totaled $6.0 million and related accumulated depreciation totaled $1.8 million. As of December 31, 2014, assets recorded under capital lease obligations totaled $6.0 million and related

82

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements


accumulated depreciation totaled $0.7 million. Interest recorded on capital lease obligations is included in interest expense in the accompanying consolidated statements of operations.
Future minimum capital lease payments at December 31, 2015 are as follows:
(in millions)
 
2016
$
1.5

2017
1.5

2018
1.6

2019
1.0

Total
$
5.6

Amount representing interest
(0.8
)
Present value of minimum lease payments
$
4.8

Current portion of capital lease obligations
(1.1
)
Noncurrent portion of capital lease obligations
$
3.7

12. Income Taxes
Income before provision for income taxes and equity income is comprised of the following:
 
Year Ended December 31,
(in millions)
2015
 
2014
 
2013
Domestic
$
45.5

 
$
42.9

 
$
26.6

Foreign
5.9

 
4.7

 
4.8

Total
$
51.4

 
$
47.6

 
$
31.4

The provision for income taxes is summarized as follows:
 
Year Ended December 31,
(in millions)
2015
 
2014
 
2013
Current tax provision
 
 
 
 
 
U.S. federal
$
18.8

 
$
8.2

 
$
15.7

State and local
2.5

 
0.9

 
2.5

Foreign
1.9

 
1.1

 
1.9

Total current
23.2

 
10.2

 
20.1

Deferred tax provision
 
 
 
 
 
U.S. federal
(5.9
)
 
4.9

 
2.2

State and local
(1.0
)
 
1.2

 
0.3

Foreign
(0.4
)
 
0.3

 
(0.4
)
Total deferred
(7.3
)
 
6.4

 
2.1

Total provision
$
15.9

 
$
16.6

 
$
22.2


83

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements


The effective income tax rate differs from the amount determined by applying the applicable U.S. statutory federal income tax rate to pretax results primarily as a result of the following:
 
Year Ended December 31,
 
2015
 
2014
 
2013
Statutory provision rate
35.0
 %
 
35.0
 %
 
35.0
 %
Permanent differences and other items
 
 
 
 
 
State tax provision
2.0
 %
 
2.4
 %
 
6.1
 %
Section 199 manufacturing credit
(3.8
)%
 
(2.0
)%
 
(5.2
)%
Incremental tax effects of foreign earnings
(0.8
)%
 
(2.1
)%
 
0.6
 %
Valuation allowance
(1.3
)%
 
2.9
 %
 
0.9
 %
Non-deductible non-cash compensation
 %
 
 %
 
32.7
 %
Other
(0.2
)%
 
(1.3
)%
 
0.6
 %
Effective income tax rate
30.9
 %
 
34.9
 %
 
70.7
 %
The 2013 “Non-deductible non-cash compensation” expense as described further in the notes to the accompanying consolidated financial statements is not deductible in our tax returns and has been reflected as a permanent difference in the effective tax rate reconciliations above.
Deferred tax assets and liabilities are comprised of the following:
 
As of December 31,
(in millions)
2015
 
2014
Deferred tax assets
 
 
 
Inventory
$
50.4

 
$
45.9

Accruals and other reserves
7.8

 
5.3

Accounts receivable
1.0

 
0.8

UNICAP adjustment
1.8

 
1.8

Derivative contracts
1.4

 
1.5

Other
2.9

 
2.0

Valuation Allowance
(1.0
)
 
(1.7
)
Gross deferred tax assets
$
64.3

 
$
55.6

Deferred tax liabilities
 
 
 
Fixed assets and intangibles
$
18.7

 
$
17.0

Investments in foreign entities
6.6

 
7.1

Financing fees
1.0

 
1.4

Gross deferred tax liability
26.3

 
25.5

Net noncurrent deferred tax asset
$
38.0

 
$
30.1

At December 31, 2015 and 2014, the inventory of deferred tax asset includes $23.9 million and $24.0 million, respectively, related to the impact of the November 19, 2007 purchase price allocations to LIFO inventories for tax purposes, which resulted in a bargain purchase gain. There is a corresponding liability recorded in the other noncurrent liabilities in the consolidated balance sheets in accordance with the provisions of ASC 740, Income Taxes.
At December 31, 2015, we had a foreign tax credit carryforward of $1.4 million which can be utilized through 2024.
Deferred tax assets are recorded for the estimated future benefit of foreign tax credits and other temporary differences to the extent management believes these assets will be realized. A valuation allowance is recorded when management cannot reach the conclusion that it is more likely than not that the deferred tax assets will be realized. Based on this evaluation, in 2015, management decreased the valuation allowance against our foreign tax credits by $0.7 million. In 2014 and 2013, management increased the valuation allowance by $1.4 million and $0.3 million, respectively. We also recorded $0.1

84

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements


million and $0.2 million of state net operating loss benefits in 2015 and 2014, respectively. The majority of the state net operating losses expire between 2029 through 2034.
We do not assert permanent reinvestment on the excess of our financial reporting over tax basis of our foreign investments. As a result, we have established deferred tax liabilities of $6.6 million and $7.1 million for the U.S. federal and state income taxes, net of applicable credits, on the excess financial reporting over tax basis of our foreign entities at December 31, 2015 and 2014, respectively. We plan foreign remittance amounts based on projected cash flow needs as well as the working capital and long-term investment requirements of our foreign subsidiaries and our domestic operations.
Uncertain Tax Positions
We are subject to income taxation in several jurisdictions around the world. Management believes that an adequate provision has been made for any adjustments that may result from tax examinations. However, the outcome of tax audits cannot be predicted with certainty. If any issues addressed in our tax audits are resolved in a manner not consistent with management’s expectations, we could be required to adjust our provision for income taxes in the period such resolution occurs. Although timing of the resolution and/or closure of audits is not certain, we believe we have adequately reserved for any potential tax exposures at December 31, 2015. The Internal Revenue Service completed its examination of our income tax returns through the period ended December 31, 2010. Our U.S. federal returns for the period ended December 31, 2012 and all subsequent periods remain open for audit. The majority of state returns for the period ended December 31, 2011 and all subsequent periods remain open for audit.
At December 31, 2015 and 2014, we had $25.1 million and $25.2 million, respectively, of unrecognized tax benefits, none of which would impact the effective tax rate, if recognized. Estimated interest and penalties related to the underpayment of income taxes are classified as a component of the provision for income taxes in the accompanying consolidated statements of operations. Accrued interest and penalties as of both December 31, 2015 and 2014 were $0.1 million. Our liability for uncertain tax positions, including accrued interest and penalties, of $25.2 million and $25.3 million at December 31, 2015 and 2014, respectively, are presented in other noncurrent liabilities in the accompanying consolidated balance sheets.
A reconciliation of the summary of activity of our uncertain tax positions is summarized as follows:
(in millions)
 
Balance at January 1, 2014
$
26.0

Additions for tax positions related to prior years

Reductions for tax positions related to prior years
(0.8
)
Reductions due to tax settlements

Reductions due to tax statute of limitations

Balance at December 31, 2014
$
25.2

Additions for tax positions related to prior years

Reductions for tax positions related to prior years
(0.1
)
Reductions due to tax settlements

Reductions due to tax statute of limitations

Balance at December 31, 2015
$
25.1

13. Employee Defined Contribution Plans and Multi-Employer Pension Plans
We have a retirement savings plan (the “Plan”) for all of our domestic subsidiaries under section 401(k) of the Internal Revenue Code that covers all U.S. salaried and most hourly employees. Participants may elect to defer a percentage of their compensation to the Plan, subject to aggregate limits required by the Internal Revenue Code. The Plan provides for discretionary matching contributions under certain circumstances, for employees based on location, pay status and membership in a collective bargaining unit. In addition, we provide a retirement contribution to certain employees based on location and age. We contributed $7.9 million, $8.1 million and $7.9 million to the Plan in 2015, 2014 and 2013, respectively, which is recorded as compensation expense in the year incurred.
Bargaining unit employees in East Alton, IL and Alliance, OH participate in the IAM Plan. The IAM Plan is a multi-employer pension plan with negotiated fixed company costs per employee hour worked. The risks of participating in these

85

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements


multi-employer plans are different from single-employer plans, as we can be subject to additional risks if other employers do not meet their obligations. In addition, if a participating employer becomes insolvent and ceases to contribute to a multiemployer plan, the unfunded obligation of the plan will be borne by the remaining participating employers. Under current law, an employer that withdraws or partially withdraws from a multi-employer pension plan may incur withdrawal liability to the plan. Given that the IAM Plan is over funded, many other participating employers are much larger than us and there are a large number of participating employers in the plan, we do not view this to be a significant risk.
We recorded expense for contributions to the IAM Plan of $3.8 million, $3.7 million and $3.3 million in 2015, 2014 and 2013, respectively, which are included in cost of sales in the accompanying consolidated statements of operations. Our participation in the IAM Plan for the annual period ended December 31, 2015, is outlined in the table below. There have been no significant changes that affect the comparability of 2015 and 2014 contributions. The IAM Plan’s year-end is December 31 and the plan reported $382.2 million and $365.8 million in employers’ contributions for 2014 and 2013, respectively.
Pension Fund
 
IAM National Pension Fund
EIN/ Pension Plan Number
 
51-6031295 / 002
Pension Protection Act Zone Status (2015 and 2014)*
 
Green Zone
FIP/RP Status Pending/Implemented
 
No
Company Contributions (FY 2015)
 
$3.9 million
Company Contributions (FY 2014)
 
$3.7 million
Surcharge Imposed
 
No
Expiration Date of Collective-Bargaining Agreement
 
November 5, 2017
* Plans in the green zone are at least 80 percent funded.
As of the date of this filing, Forms 5500 were not available for the plan year ended in 2015.
14. Derivative Contracts
We maintain a metal, energy and utility pricing risk-management strategy that uses commodity derivative contracts to minimize significant, unanticipated gains or losses that may arise from volatility of the commodity indices.
We are also exposed to credit risk and market risk. Credit risk is the risk that the counterparty might fail to fulfill its performance obligations under the terms of the derivative contract. Market risk is the risk that the value of a derivative instrument might be adversely affected by a change in commodity price. We manage the market risk associated with derivative contracts by establishing and monitoring parameters that limit the types and degree of market risk that may be undertaken.
We manage credit risk associated with derivative contracts by executing derivative instruments with counterparties that we believe are credit-worthy. The amount of such credit risk is limited to the fair value of the derivative contract plus the unpaid portion of amounts due to the Company pursuant to terms of the derivative contracts, if any. If the credit-worthiness of these counterparties deteriorates, we believe the exposure is mitigated by provisions in the derivative arrangements which allow for the legal right of offset of amounts due to the Company from the counterparties, if any, with any amounts payable to the counterparties.

86

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements


The following tables provide a summary of our outstanding commodity derivative contracts:
 
As of December 31,
 
2015
 
2014
(in millions, except for number of contracts)
Net
Notional
Amount
 
# of
Contracts
 
Net
Notional
Amount
 
# of
Contracts
Metal
$
18.2

 
534

 
$
13.4

 
400

Natural gas
1.7

 
64

 
2.6

 
78

Electricity
2.6

 
50

 
5.9

 
77

Total
$
22.5

 
648

 
$
21.9

 
555

 
As of December 31,
(in millions)
2015
 
2014
Notional amount - long
$
28.5

 
$
29.9

Notional amount - (short)
(6.0
)
 
(8.0
)
Net long / (short)
$
22.5

 
$
21.9

The fair values of derivative contracts in the accompanying consolidated balance sheets include the impact of netting derivative assets and liabilities when a legally enforceable master netting arrangement exists. The following tables summarize the gross amounts of open derivative contracts, the net amounts presented in the consolidated balance sheets, and the collateral deposited with counterparties:
 
As of December 31, 2015
(in millions)
Gross Amounts of
Recognized Assets
 
Gross Amounts Offset in
Consolidated Balance
Sheet
 
Net Amounts of Assets
Presented in Consolidated
Balance Sheet
Metal
$
0.6

 
$
(0.6
)
 
$

Natural gas

 

 

Electricity
0.1

 
(0.1
)
 

Collateral on deposit
3.2

 
(1.4
)
 
1.8

Total
$
3.9

 
$
(2.1
)
 
$
1.8

Consolidated balance sheet location:
 
 
 
 
 
Prepaid expenses and other current assets
 
 
 
 
$
1.8

 
As of December 31, 2015
(in millions)
Gross Amounts of
Recognized Liabilities
 
Gross Amounts Offset in
Consolidated Balance
Sheet
 
Net Amounts of Liabilities
Presented in Consolidated
Balance Sheet
Metal
$
1.7

 
$
(1.7
)
 
$

Natural gas
0.4

 
(0.4
)
 

Electricity

 

 

Total
$
2.1

 
$
(2.1
)
 
$


87

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements



As of December 31, 2014
(in millions)
Gross Amounts of
Recognized Assets
 
Gross Amounts Offset in
Consolidated Balance
Sheet
 
Net Amounts of Assets
Presented in Consolidated
Balance Sheet
Metal
$
0.5

 
$
(0.5
)
 
$

Natural gas

 

 

Electricity
0.2

 
(0.2
)
 

Collateral on deposit
3.3

 
(2.0
)
 
1.3

Total
$
4.0

 
$
(2.7
)
 
$
1.3

Consolidated balance sheet location:
 
 
 
 
 
Prepaid expenses and other current assets
 
 
 
 
$
1.3

 
As of December 31, 2014
(in millions)
Gross Amounts of
Recognized Liabilities
 
Gross Amounts Offset in
Consolidated Balance
Sheet
 
Net Amounts of Liabilities
Presented in Consolidated
Balance Sheet
Metal
$
1.4

 
$
(1.4
)
 
$

Natural gas
0.7

 
(0.7
)
 

Electricity
0.6

 
(0.6
)
 

Total
$
2.7

 
$
(2.7
)
 
$

The following table summarizes the effects of derivative contracts in the accompanying consolidated statements of operations:
 
Year Ended December 31,
(in millions)
2015
 
2014
 
2013
Losses (gains) in cost of sales for:
 
 
 
 
 
Metal
$
2.3

 
$
(0.4
)
 
$
(0.9
)
Natural gas
0.6

 
0.6

 
(0.2
)
Electricity
0.4

 
(0.6
)
 
0.1

Total
$
3.3

 
$
(0.4
)
 
$
(1.0
)
15. Fair Value Measurements
ASC 820 specifies a fair value framework and hierarchy based upon the observability of inputs used in valuation techniques. In accordance with this guidance, fair value measurements are classified under the following hierarchy:
Level 1 - Quoted prices for identical instruments in active markets.
Level 2 - Quoted prices for similar instruments in active markets; quoted prices for identical or similar instruments in markets that are not active and model-derived valuations in which all significant inputs or significant value-drivers are observable in active markets.
Level 3 - Model-derived valuations in which one or more significant inputs or significant value-drivers are unobservable.
As of December 31, 2015 and December 31, 2014 the fair value of our commodity derivative contracts was $1.8 million and $1.3 million, respectively. In accordance with ASC 820, our metal, energy and utility commodity derivative contracts are considered Level 2, as fair value measurements consist of both quoted price inputs and inputs provided by a third party that are derived principally from or corroborated by observable market data by correlation. These assumptions include, but

88

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements


are not limited to, those concerning interest rates, credit rates, discount rates, default rates and other factors. All of our derivative commodity contracts have a set term of 24 months or less.
We do not hold assets or liabilities requiring a Level 3 measurement and there have not been any transfers between the hierarchy levels during 2015 or 2014.
For purposes of financial reporting, we have determined that the carrying value of cash, accounts receivable, accounts payable, and accrued expenses approximates fair value due to their short term nature. Additionally, given the revolving nature and the variable interest rates, we have determined that the carrying value of the ABL Facility also approximates fair value. As of December 31, 2015, the fair value of our Senior Secured Notes approximated $365.2 million compared to a carrying value of $345.3 million. As of December 31, 2014, the fair value of our Senior Secured Notes approximated $405.0 million compared to a carrying value of $375.0 million. The fair value of the Senior Secured Notes was based upon quotes from financial institutions (Level 2 in the fair value hierarchy as defined by ASC 820).
16. Commitments and Contingencies
Environmental Considerations
We are subject to a variety of environmental laws and regulations governing discharges to air and water, the handling, storage and disposal of hazardous or solid waste materials and the remediation of contamination associated with releases of hazardous substances. Although we believe we are in material compliance with all of the various regulations applicable to our business, there can be no assurance that requirements will not change in the future or that we will not incur significant costs to comply with such requirements. We employ responsible personnel at each facility, along with various environmental engineering consultants from time to time to assist with ongoing management of environmental, health and safety requirements. We expense environmental costs related to existing conditions resulting from past or current operations and from which no current or future benefit is discernible. Expenditures that extend the life of the related property are capitalized. We determine our liability on a location by location basis and record a liability at the time it is deemed probable and can be reasonably estimated. We are currently not aware of any environmental matters which may have a material impact on our financial position, results of operations, or liquidity.
On November 19, 2007 (the date of inception of GBC), we acquired the assets and operations relating to the worldwide metals business of Olin Corporation. Olin Corporation agreed to retain liability arising out of the existing conditions on certain of our properties for any remedial actions required by environmental laws, and agreed to indemnify the Company for all or part of a number of other environmental liabilities. Since 2007, Olin Corporation has been performing remedial actions at the facilities in East Alton, Illinois and Waterbury, Connecticut related to environmental conditions at such facilities, and has been participating in remedial actions at certain other properties as well. If Olin Corporation were to stop its environmental remedial activities at our properties, we could be required to assume responsibility for these activities, the cost of which could be material.
Legal Considerations
We are party to various legal proceedings arising in the ordinary course of business. We believe that none of our lawsuits are individually material or that the aggregate exposure of all of our lawsuits, including those that are probable and those that are only reasonably possible, is material to our financial condition, results of operations or cash flows.
Operating Leases
We have operating leases covering certain facilities and equipment under non-cancelable lease agreements.

89

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements


As of December 31, 2015, future minimum lease payments under non-cancelable leases in effect are as follows:
(in millions)
Payment
2016
$
2.4

2017
1.9

2018
1.5

2019
0.6

2020
0.2

Thereafter
0.2

Total minimum lease payments
$
6.8

Rental expense under all operating leases was approximately $3.1 million, $3.2 million and $3.3 million in 2015, 2014 and 2013, respectively, and is recorded in the accompanying consolidated statements of operations as cost of sales or selling, general and administrative costs depending on the nature and use of the underlying asset being leased.
17. Share-based Compensation
The Global Brass and Copper Holdings, Inc. 2013 Omnibus Equity Incentive Plan (“2013 Plan”) was adopted by the Board of Directors and approved by shareholders on April 10, 2013. The 2013 Plan provides for an aggregate of 1,111,053 shares of Global Brass and Copper Holdings, Inc.’s common stock to be available for awards in the form of options, restricted stock, restricted stock units, performance-based shares and other equity-based awards. Pursuant to the 2013 Plan, in 2015, 2014 and 2013, we granted non-qualified options, restricted stock and performance-based shares to certain employees and members of our management and our Board of Directors. At December 31, 2015, 120,374 shares were available for future grant.
We will satisfy the requirement for common stock for share-based payments by issuing shares out of authorized but unissued common stock or treasury stock.
Stock Options
The exercise prices of stock options are equal to no less than the fair market value of common stock at the time of grant. Stock options will generally vest in three equal installments on the anniversary of the date of grant and have a maximum term of 10 years. Management uses the straight-line attribution method to recognize expense for all stock options. Stock options are generally subject to immediate forfeiture if employment terminates prior to vesting, except under certain conditions, in which case the options expire no more than 90 days after the date of such termination. The fair value of each option grant is estimated on the date of grant using the Black-Scholes option-pricing model and the following weighted-average inputs for the option pricing model:
 
2015
 
2014
 
2013
Expected volatility
48
%
 
53
%
 
55
%
Risk-free interest rate
1.7
%
 
2.2
%
 
1.3
%
Dividend yield
1.1
%
 
0.9
%
 
1.3
%
Expected term
6.0 years

 
6.0 years

 
6.0 years

Because we have only been a public company since May 2013, there is limited historical data on the volatility of our common stock. As a result, the expected volatility of the 2015, 2014 and 2013 option grants was estimated based on the average volatility of the common stock of a group of our publicly traded peers.
The risk-free interest rate assumption in the Black-Scholes option-pricing model is based upon the U.S. Treasury Strips available with maturity period consistent with the expected term assumption. The dividend yield assumption is based on Global Brass and Copper Holdings, Inc.’s expectation of dividend payouts.

90

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements


Because we have only very limited historical information concerning stock option exercise behavior by our employees and such information is not readily available from a peer group of companies, we estimated the expected term using the “simplified” method permitted by Staff Accounting Bulletin Topic 14 issued by the SEC.
A summary of the stock option activity is summarized as follows:
 
 
Shares
 
Weighted Average Exercise Price of Shares
 
Average Remaining Contractual Term (in years)
 
Aggregate Intrinsic Value
(in millions)
Outstanding at December 31, 2012
 

 
$

 
 
 
 
Granted
 
107,895

 
11.27

 
 
 
 
Exercised
 

 

 
 
 
 
Forfeited or expired
 

 

 
 
 
 
Outstanding at December 31, 2013
 
107,895

 
$
11.27

 
9.4
 
$
0.6

Granted
 
143,685

 
16.06

 
 
 
 
Exercised
 
(11,605
)
 
11.00

 
 
 
 
Forfeited or expired
 

 

 
 
 
 
Outstanding at December 31, 2014
 
239,975

 
$
14.15

 
8.9
 
$
0.2

Granted
 
175,727

 
13.73

 
 
 
 
Exercised
 
(16,970
)
 
13.07

 
 
 
 
Forfeited or expired
 
(24,047
)
 
15.79

 
 
 
 
Outstanding at December 31, 2015
 
374,685

 
$
13.90

 
8.5
 
$
2.8

Options exercisable at December 31, 2015
 
113,027

 
$
13.31

 
7.8
 
$
0.9

The weighted-average grant date fair value of stock options granted during 2015, 2014 and 2013 was $5.84, $7.64 and $5.21, respectively. The total intrinsic value of stock options exercised in 2015 and 2014 was $0.1 million and $0.1 million, respectively.
As of December 31, 2015, we had $0.9 million of total unrecognized compensation expense related to stock option grants that will be recognized over the weighted average period of 1.6 years.
Restricted Stock
Restricted stock is granted to certain employees and non-employee directors and the cost of these awards is determined using the market price of our common stock on the date of grant. Restricted stock shares granted represent newly issued shares and have the same cash dividend and voting rights as other common stock and are considered to be currently issued and outstanding. Restricted stock awards granted to employees vest over periods ranging from one to three years after the grant date, and awards granted to non-employee directors generally vest from 218 days to one year following the grant date. Management uses the straight-line attribution method to recognize expense for all restricted stock awards. The awards are generally subject to forfeiture if employment terminates prior to vesting, except under certain conditions. The cash dividends on restricted stock shares are forfeitable, and payments of cash dividends on restricted stock shares are withheld until the shares vest. Compensation is recognized over the period during which the employees provide the requisite service to the Company.

91

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements


A summary of the changes in restricted stock under the 2013 Plan is presented below: 
 
 
Shares
 
Weighted Average
Grant Date Fair
Value
Nonvested restricted stock—December 31, 2012
 

 
$

Granted
 
141,486

 
11.34

Vested
 
(10,938
)
 
11.00

Forfeited
 

 

Nonvested restricted stock—December 31, 2013
 
130,548

 
$
11.37

Granted
 
104,563

 
15.66

Vested
 
(106,010
)
 
11.43

Forfeited
 
(7,952
)
 
14.30

Nonvested restricted stock—December 31, 2014
 
121,149

 
$
14.83

Granted
 
171,919

 
14.32

Vested
 
(84,430
)
 
14.47

Forfeited
 
(5,380
)
 
15.59

Nonvested restricted stock—December 31, 2015
 
203,258

 
$
14.53

The total fair value of restricted stock that vested during 2015, 2014 and 2013 was $1.5 million, $1.7 million and $0.2 million, respectively.
At December 31, 2015, total unrecognized compensation cost related to nonvested restricted stock was $1.8 million and is expected to be recognized over a weighted average period of 1.6 years.
Performance Shares
Performance share awards are granted to certain employees and provide for the issuance of common stock if specified Company performance targets and market conditions are achieved. The number of common shares issued is dependent upon vesting and actual performance of the Company relative to the established targets.
The fair value of performance share awards granted is determined based on the market price of our common stock on the date of grant. Additionally, the awards granted in 2015 include a market condition that must also be achieved in order to earn more than the performance shares granted; therefore, the fair value of any shares earned in excess of 100% was determined on the date of grant using a Monte Carlo simulation model. Specific to the estimated 2015 performance shares earned in excess of 100%, the fair value and weighted-average inputs used were as follows:
 
2015
Weighted-average grant date fair value
$
5.54

Expected volatility
29
%
Risk-free interest rate
0.6
%
Dividend yield
%
The amount of compensation expense recognized for performance shares reflects management’s assessment of the probability that performance goals will be achieved. One tranche of the performance shares granted in 2015 will vest in two equal installments on the second and third anniversaries of the grant date, while the other will vest on the second anniversary of the grant date. For performance shares granted in 2014 and 2013, the number of performance shares earned generally vest in three equal installments on the anniversary date of the grant. Performance shares that have not vested are generally subject to forfeiture if employment terminates, except under certain conditions. Cash dividends accrue on performance shares once the performance conditions have been met, but the dividends are forfeitable if the performance shares do not vest. We recognize compensation expense related to performance share grants using the graded-vesting method over the vesting periods.

92

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements


A summary of the performance share award activity is summarized as follows: 
 
 
Shares
 
Weighted-Average
Grant-Date Fair
Value
Nonvested performance shares—December 31, 2012
 

 
$

Granted
 
103,273

 
11.35

Vested
 
(3,646
)
 
13.14

Unearned or forfeited (a)
 
(81,461
)
 
11.28

Nonvested performance shares—December 31, 2013
 
18,166

 
$
11.31

Granted
 
257,067

 
16.06

Vested
 
(6,059
)
 
11.31

Unearned or forfeited (a)
 
(257,067
)
 
16.06

Nonvested performance shares—December 31, 2014
 
12,107

 
$
11.31

Granted
 
217,560

 
13.74

Vested
 
(6,139
)
 
11.31

Unearned or forfeited
 
(4,688
)
 
13.63

Nonvested performance shares—December 31, 2015
 
218,840

 
$
15.94

(a)    Includes shares granted in 2014 and 2013 that were not earned based on performance provisions of the award grants.
The total fair value of performance shares that vested during 2015, 2014 and 2013 was $0.1 million, $0.1 million and $0.1 million, respectively.
At December 31, 2015, total unrecognized compensation cost related to the performance share awards granted of approximately $2.6 million is expected to be recognized over a weighted average period of 1.4 years.
Share-Based Compensation Expense
The following table summarizes share-based compensation expense, reported as a component of selling, general, and administrative expense, related to our stock options, restricted stock and performance share awards:
 
Year Ended December 31,
(in millions)
2015
 
2014
 
2013
Stock options
$
0.9

 
$
0.5

 
$
0.2

Restricted stock
1.7

 
1.1

 
0.9

Performance shares
1.6

 
0.1

 
0.1

Total pre-tax share-based compensation expense
$
4.2

 
$
1.7

 
$
1.2

Net tax benefit related to share-based compensation expense
$
1.6

 
$
0.7

 
$
0.5

Tax benefits realized from the exercise of stock options and the vesting of restricted stock and performance shares were $0.5 million and $0.6 million in 2015 and 2014, respectively. No tax benefits were realized in 2013, because no stock options were exercised and the compensation cost for restricted stock and performance shares that vested was not currently deductible.

93

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements


18. Guarantor / Non-Guarantor Subsidiary Financial Information
In June 2012, Holdings (presented as “Parent” in the following tables), through its wholly-owned principal operating subsidiary, GBC (presented as “Issuer” in the following tables), issued the Senior Secured Notes as further described in Note 11, “Financing.” The Senior Secured Notes are jointly and severally guaranteed on a senior secured basis by Holdings and substantially all existing 100%-owned U.S. subsidiaries of GBC and any future restricted subsidiaries who guarantee or incur certain types of Permitted Debt, as such term is defined under the Indenture (individually, a “Guarantor” and collectively, the “Guarantors”). The guarantees are full and unconditional, except that a Guarantor can be automatically released and relieved of its obligations under certain customary provisions contained in the Indenture. Under these customary provisions, a Guarantor is automatically released from its obligations as a guarantor upon the sale of the Guarantor or substantially all of its assets to a third party, the designation of the Guarantor as an unrestricted subsidiary in accordance with the terms of the Indenture, the release or discharge of all guarantees by such Guarantor and the repayment of all indebtedness, or upon the Issuer’s exercise of its legal defeasance option or covenant defeasance option or if the obligations under the Indenture are discharged in accordance with the terms of the Indenture. All other subsidiaries of GBC, whether direct or indirect, do not guarantee the Senior Secured Notes (collectively, the “Non-Guarantors”).
Holdings is also a guarantor of the ABL Facility and substantially all of its 100%-owned U.S. subsidiaries are borrowers under, or guarantors of, the ABL Facility on a senior secured basis.
The following condensed consolidating financial information presents the financial position, results of operations, comprehensive income and cash flows of (1) the Parent, (2) the Issuer, (3) the Guarantors, (4) the Non-Guarantors and (5) eliminations to arrive at the information for the Company on a consolidated basis. The condensed consolidating financial information presented below is not necessarily indicative of the financial position, results of operations, comprehensive income or cash flows of the Parent, the Issuer, the Guarantors or the Non-Guarantors on a stand-alone basis.
As discussed in Note 2, “Summary of Significant Accounting Policies,” we adopted ASU 2015-3 and ASU 2015-17 on December 31, 2015 and we applied the new guidance retrospectively to all prior periods presented in the accompanying financial statements to conform to the fiscal 2015 presentation. The adoption of ASU 2015-03 resulted in a decrease of $9.4 million in the Company’s and the Issuer’s other noncurrent assets and a corresponding decrease in the Company’s and the Issuer’s noncurrent portion of debt as of December 31, 2014 related to the retrospective reclassification of deferred financing fees incurred in connection with the issuance of the Senior Secured Notes. The adoption of ASU 2015-17 resulted in a decrease of $30.1 million in the Company’s and the Issuer’s current deferred income tax asset, a decrease of $0.8 million in the Company’s and the Issuer’s noncurrent deferred income tax liability and a corresponding net increase of $29.3 million to the Company’s and the Issuer’s noncurrent deferred income tax assets as of December 31, 2014 related to the retrospective reclassification of all deferred income taxes as noncurrent on the balance sheet.

94

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements


 
Condensed Consolidating Balance Sheet
As of December 31, 2015
(in millions)
Parent
 
Issuer
 
Guarantor
Subsidiaries
 
Non-
Guarantor
Subsidiaries
 
Eliminations
 
Consolidated
Assets
 
 
 
 
 
 
 
 
 
 
 
Current assets:
 
 
 
 
 
 
 
 
 
 
 
Cash
$

 
$
68.8

 
$
4.1

 
$
12.3

 
$
(1.7
)
 
$
83.5

Accounts receivable, net of allowance

 
3.1

 
106.1

 
10.4

 

 
119.6

Inventories

 

 
164.9

 
12.7

 
(1.3
)
 
176.3

Prepaid expenses and other current assets

 
10.1

 
6.9

 
0.4

 

 
17.4

Income tax receivable

 
2.7

 

 

 
(0.3
)
 
2.4

Total current assets

 
84.7

 
282.0

 
35.8

 
(3.3
)
 
399.2

Property, plant and equipment, net

 
0.4

 
110.3

 
0.4

 

 
111.1

Investment in subsidiaries
65.4

 
872.1

 
22.3

 

 
(959.8
)
 

Intercompany accounts

 

 
559.2

 

 
(559.2
)
 

Goodwill

 

 
4.4

 

 

 
4.4

Intangible assets, net

 

 
0.5

 

 

 
0.5

Deferred income taxes

 
38.0

 

 

 

 
38.0

Other noncurrent assets

 
2.0

 
2.0

 

 

 
4.0

Total assets
$
65.4

 
$
997.2

 
$
980.7

 
$
36.2

 
$
(1,522.3
)
 
$
557.2

Liabilities and equity
 
 
 
 
 
 
 
 
 
 
 
Current liabilities:
 
 
 
 
 
 
 
 
 
 
 
Current portion of capital lease obligation
$

 
$

 
$
1.1

 
$

 
$

 
$
1.1

Accounts payable

 
2.0

 
69.5

 
2.5

 
(3.0
)
 
71.0

Accrued liabilities

 
19.3

 
34.0

 
0.6

 

 
53.9

Accrued interest

 
3.0

 

 

 

 
3.0

Income tax payable

 

 
0.2

 
0.3

 
(0.3
)
 
0.2

Total current liabilities

 
24.3

 
104.8

 
3.4

 
(3.3
)
 
129.2

Noncurrent portion of debt

 
338.3

 
3.7

 

 

 
342.0

Other noncurrent liabilities

 
25.2

 
0.1

 

 

 
25.3

Intercompany accounts
9.0

 
544.0

 

 
6.2

 
(559.2
)
 

Total liabilities
9.0

 
931.8

 
108.6

 
9.6

 
(562.5
)
 
496.5

Global Brass and Copper Holdings, Inc. stockholders’ equity
56.4

 
65.4

 
872.1

 
22.3

 
(959.8
)
 
56.4

Noncontrolling interest

 

 

 
4.3

 

 
4.3

Total equity
56.4

 
65.4

 
872.1

 
26.6

 
(959.8
)
 
60.7

Total liabilities and equity
$
65.4

 
$
997.2

 
$
980.7

 
$
36.2

 
$
(1,522.3
)
 
$
557.2


95

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements


 
Condensed Consolidating Balance Sheet
As of December 31, 2014
(in millions)
Parent
 
Issuer
 
Guarantor
Subsidiaries
 
Non-
Guarantor
Subsidiaries
 
Eliminations
 
Consolidated
Assets
 
 
 
 
 
 
 
 
 
 
 
Current assets:
 
 
 
 
 
 
 
 
 
 
 
Cash
$

 
$
37.6

 
$
3.8

 
$
4.6

 
$
(1.4
)
 
$
44.6

Accounts receivable, net of allowance

 
2.6

 
131.6

 
18.1

 

 
152.3

Inventories

 

 
173.5

 
15.8

 
(0.3
)
 
189.0

Prepaid expenses and other current assets

 
10.1

 
16.0

 
0.1

 

 
26.2

Income tax receivable

 
8.4

 

 

 
(0.1
)
 
8.3

Total current assets

 
58.7

 
324.9

 
38.6

 
(1.8
)
 
420.4

Property, plant and equipment, net

 
0.7

 
102.4

 
0.4

 

 
103.5

Investment in joint venture

 

 
2.0

 

 

 
2.0

Investment in subsidiaries
29.8

 
752.5

 
23.1

 

 
(805.4
)
 

Intercompany accounts

 

 
419.3

 

 
(419.3
)
 

Goodwill

 

 
4.4

 

 

 
4.4

Intangible assets, net

 

 
0.6

 

 

 
0.6

Deferred income taxes

 
30.1

 

 

 

 
30.1

Other noncurrent assets

 
3.1

 
2.2

 

 

 
5.3

Total assets
$
29.8

 
$
845.1

 
$
878.9

 
$
39.0

 
$
(1,226.5
)
 
$
566.3

Liabilities and equity
 
 
 
 
 
 
 
 
 
 
 
Current liabilities:
 
 
 
 
 
 
 
 
 
 
 
Current portion of capital lease obligation
$

 
$

 
$
1.0

 
$

 
$

 
$
1.0

Accounts payable

 
0.6

 
82.0

 
1.6

 
(1.7
)
 
82.5

Accrued liabilities

 
18.4

 
38.3

 
0.6

 

 
57.3

Accrued interest

 
3.2

 

 

 

 
3.2

Income tax payable

 

 
0.2

 
0.4

 
(0.1
)
 
0.5

Total current liabilities

 
22.2

 
121.5

 
2.6

 
(1.8
)
 
144.5

Noncurrent portion of debt

 
365.6

 
4.8

 

 

 
370.4

Other noncurrent liabilities

 
25.3

 
0.1

 

 

 
25.4

Intercompany accounts
8.2

 
402.2

 

 
8.9

 
(419.3
)
 

Total liabilities
8.2

 
815.3

 
126.4

 
11.5

 
(421.1
)
 
540.3

Global Brass and Copper Holdings, Inc. stockholders’ equity
21.6

 
29.8

 
752.5

 
23.1

 
(805.4
)
 
21.6

Noncontrolling interest

 

 

 
4.4

 

 
4.4

Total equity
21.6

 
29.8

 
752.5

 
27.5

 
(805.4
)
 
26.0

Total liabilities and equity
$
29.8

 
$
845.1

 
$
878.9

 
$
39.0

 
$
(1,226.5
)
 
$
566.3


96

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements


 
Condensed Consolidating Statement of Operations
Year Ended December 31, 2015
(in millions)
Parent
 
Issuer
 
Guarantor
Subsidiaries
 
Non-
Guarantor
Subsidiaries
 
Eliminations
 
Consolidated
Net sales
$

 
$

 
$
1,443.1

 
$
84.7

 
$
(21.6
)
 
$
1,506.2

Cost of sales

 
(6.4
)
 
(1,274.7
)
 
(76.4
)
 
21.6

 
(1,335.9
)
Gross profit (loss)

 
(6.4
)
 
168.4

 
8.3

 

 
170.3

Selling, general and administrative expenses
(1.2
)
 
(21.3
)
 
(57.5
)
 
(3.2
)
 

 
(83.2
)
Operating income (loss)
(1.2
)
 
(27.7
)
 
110.9

 
5.1

 

 
87.1

Interest expense

 
(38.7
)
 
(0.4
)
 

 

 
(39.1
)
Loss on extinguishment of debt

 
(3.1
)
 

 

 

 
(3.1
)
Gain on sale of investment in joint venture

 

 
6.3

 

 

 
6.3

Other income (expense), net

 
(0.3
)
 
(0.3
)
 
0.8

 

 
0.2

Income (loss) before provision for (benefit from) income taxes and equity income
(1.2
)
 
(69.8
)
 
116.5

 
5.9

 

 
51.4

(Provision for) benefit from income taxes
0.4

 
21.8

 
(36.6
)
 
(1.5
)
 

 
(15.9
)
Income (loss) before equity income
(0.8
)
 
(48.0
)
 
79.9

 
4.4

 

 
35.5

Equity income, net of tax
36.4

 
84.4

 
4.5

 

 
(125.0
)
 
0.3

Net income
35.6

 
36.4

 
84.4

 
4.4

 
(125.0
)
 
35.8

Net income attributable to noncontrolling interest

 

 

 
(0.2
)
 

 
(0.2
)
Net income attributable to Global Brass and Copper Holdings, Inc.
$
35.6

 
$
36.4

 
$
84.4

 
$
4.2

 
$
(125.0
)
 
$
35.6

 
Condensed Consolidating Statement of Operations
Year Ended December 31, 2014
(in millions)
Parent
 
Issuer
 
Guarantor
Subsidiaries
 
Non-
Guarantor
Subsidiaries
 
Eliminations
 
Consolidated
Net sales
$

 
$

 
$
1,641.3

 
$
97.6

 
$
(27.5
)
 
$
1,711.4

Cost of sales

 
(1.0
)
 
(1,483.7
)
 
(89.6
)
 
27.5

 
(1,546.8
)
Gross profit (loss)

 
(1.0
)
 
157.6

 
8.0

 

 
164.6

Selling, general and administrative expenses
(1.1
)
 
(18.2
)
 
(54.3
)
 
(3.3
)
 

 
(76.9
)
Operating income (loss)
(1.1
)
 
(19.2
)
 
103.3

 
4.7

 

 
87.7

Interest expense

 
(39.3
)
 
(0.3
)
 

 

 
(39.6
)
Other expense, net

 
(0.4
)
 
(0.1
)
 

 

 
(0.5
)
Income (loss) before provision for (benefit from) income taxes and equity income
(1.1
)
 
(58.9
)
 
102.9

 
4.7

 

 
47.6

(Provision for) benefit from income taxes
0.5

 
20.9

 
(36.6
)
 
(1.4
)
 

 
(16.6
)
Income (loss) before equity income
(0.6
)
 
(38.0
)
 
66.3

 
3.3

 

 
31.0

Equity income, net of tax
32.3

 
70.3

 
4.0

 

 
(105.5
)
 
1.1

Net income
31.7

 
32.3

 
70.3

 
3.3

 
(105.5
)
 
32.1

Net income attributable to noncontrolling interest

 

 

 
(0.4
)
 

 
(0.4
)
Net income attributable to Global Brass and Copper Holdings, Inc.
$
31.7

 
$
32.3

 
$
70.3

 
$
2.9

 
$
(105.5
)
 
$
31.7


97

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements


 
Condensed Consolidating Statement of Operations
Year Ended December 31, 2013
(in millions)
Parent
 
Issuer
 
Guarantor
Subsidiaries
 
Non-
Guarantor
Subsidiaries
 
Eliminations
 
Consolidated
Net sales
$

 
$

 
$
1,693.9

 
$
98.4

 
$
(33.8
)
 
$
1,758.5

Cost of sales

 
(0.1
)
 
(1,519.3
)
 
(90.6
)
 
33.8

 
(1,576.2
)
Gross profit (loss)

 
(0.1
)
 
174.6

 
7.8

 

 
182.3

Selling, general and administrative expenses
(5.9
)
 
(36.8
)
 
(65.1
)
 
(3.0
)
 

 
(110.8
)
Operating income (loss)
(5.9
)
 
(36.9
)
 
109.5

 
4.8

 

 
71.5

Interest expense

 
(39.8
)
 

 

 

 
(39.8
)
Other income (expense), net

 
(0.4
)
 
0.1

 

 

 
(0.3
)
Income (loss) before provision for (benefit from) income taxes and equity income
(5.9
)
 
(77.1
)
 
109.6

 
4.8

 

 
31.4

(Provision for) benefit from income taxes
2.3

 
20.9

 
(43.9
)
 
(1.5
)
 

 
(22.2
)
Income (loss) before equity income
(3.6
)
 
(56.2
)
 
65.7

 
3.3

 

 
9.2

Equity income, net of tax
14.0

 
70.2

 
4.5

 

 
(87.2
)
 
1.5

Net income
10.4

 
14.0

 
70.2

 
3.3

 
(87.2
)
 
10.7

Net income attributable to noncontrolling interest

 

 

 
(0.3
)
 

 
(0.3
)
Net income attributable to Global Brass and Copper Holdings, Inc.
$
10.4

 
$
14.0

 
$
70.2

 
$
3.0

 
$
(87.2
)
 
$
10.4


98

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements


 
Condensed Consolidating Statement of Comprehensive Income
Year Ended December 31, 2015
(in millions)
Parent
 
Issuer
 
Guarantor
Subsidiaries
 
Non-
Guarantor
Subsidiaries
 
Eliminations
 
Consolidated
Net income
$
35.6

 
$
36.4

 
$
84.4

 
$
4.4

 
$
(125.0
)
 
$
35.8

Foreign currency translation adjustment, net of tax
(1.7
)
 
(1.7
)
 
(2.3
)
 
(2.7
)
 
6.6

 
(1.8
)
Comprehensive income
33.9

 
34.7

 
82.1

 
1.7

 
(118.4
)
 
34.0

Less: Comprehensive income attributable to noncontrolling interest

 

 

 
(0.1
)
 

 
(0.1
)
Comprehensive income attributable to Global Brass and Copper Holdings, Inc.
$
33.9

 
$
34.7

 
$
82.1

 
$
1.6

 
$
(118.4
)
 
$
33.9

 
Condensed Consolidating Statement of Comprehensive Income
Year Ended December 31, 2014
(in millions)
Parent
 
Issuer
 
Guarantor
Subsidiaries
 
Non-
Guarantor
Subsidiaries
 
Eliminations
 
Consolidated
Net income
$
31.7

 
$
32.3

 
$
70.3

 
$
3.3

 
$
(105.5
)
 
$
32.1

Foreign currency translation adjustment, net of tax
(1.1
)
 
(1.1
)
 
(1.7
)
 
(1.2
)
 
4.0

 
(1.1
)
Comprehensive income
30.6

 
31.2

 
68.6

 
2.1

 
(101.5
)
 
31.0

Less: Comprehensive income attributable to noncontrolling interest

 

 

 
(0.4
)
 

 
(0.4
)
Comprehensive income attributable to Global Brass and Copper Holdings, Inc.
$
30.6

 
$
31.2

 
$
68.6

 
$
1.7

 
$
(101.5
)
 
$
30.6

 
Condensed Consolidating Statement of Comprehensive Income
Year Ended December 31, 2013
(in millions)
Parent
 
Issuer
 
Guarantor
Subsidiaries
 
Non-
Guarantor
Subsidiaries
 
Eliminations
 
Consolidated
Net income
$
10.4

 
$
14.0

 
$
70.2

 
$
3.3

 
$
(87.2
)
 
$
10.7

Foreign currency translation adjustment, net of tax
(1.0
)
 
(1.0
)
 
(1.6
)
 
0.3

 
2.4

 
(0.9
)
Comprehensive income
9.4

 
13.0

 
68.6

 
3.6

 
(84.8
)
 
9.8

Less: Comprehensive income attributable to noncontrolling interest

 

 

 
(0.4
)
 

 
(0.4
)
Comprehensive income attributable to Global Brass and Copper Holdings, Inc.
$
9.4

 
$
13.0

 
$
68.6

 
$
3.2

 
$
(84.8
)
 
$
9.4


99

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements


 
Condensed Consolidating Statement of Cash Flows
Year Ended December 31, 2015
(in millions)
Parent
 
Issuer
 
Guarantor
Subsidiaries
 
Non-
Guarantor
Subsidiaries
 
Eliminations
 
Consolidated
Cash flows from operating activities
 
 
 
 
 
 
 
 
 
 
 
Net cash provided by operating activities
$
3.3

 
$
66.6

 
$
14.5

 
$
9.9

 
$
(5.5
)
 
$
88.8

Cash flows from investing activities
 
 
 
 
 
 
 
 
 
 
 
Capital expenditures

 

 
(21.3
)
 
(0.1
)
 

 
(21.4
)
Proceeds from sale of property, plant and equipment

 

 
0.1

 

 

 
0.1

Proceeds from sale of investment in joint venture

 

 
8.0

 


 

 
8.0

Net cash used in investing activities

 

 
(13.2
)
 
(0.1
)
 

 
(13.3
)
Cash flows from financing activities
 
 
 
 
 
 
 
 
 
 
 
Borrowings on ABL Facility

 
1.2

 

 

 

 
1.2

Payments on ABL Facility

 
(1.2
)
 

 

 

 
(1.2
)
Purchases of Senior Secured Notes

 
(29.7
)
 

 

 

 
(29.7
)
Premium payment on partial extinguishment of debt

 
(2.5
)
 

 

 

 
(2.5
)
Principal payments under capital lease obligation

 

 
(1.0
)
 

 

 
(1.0
)
Dividends paid
(3.2
)
 
(3.2
)
 

 
(2.0
)
 
5.2

 
(3.2
)
Distributions to noncontrolling interest owner

 

 

 
(0.2
)
 

 
(0.2
)
Proceeds from exercise of stock options
0.1

 

 

 

 

 
0.1

Excess tax benefit from share-based compensation
0.1

 

 

 

 

 
0.1

Share repurchases
(0.3
)
 

 

 

 

 
(0.3
)
Net cash used in financing activities
(3.3
)
 
(35.4
)
 
(1.0
)
 
(2.2
)
 
5.2

 
(36.7
)
Effect of foreign currency exchange rates

 

 

 
0.1

 

 
0.1

Net increase in cash

 
31.2

 
0.3

 
7.7

 
(0.3
)
 
38.9

Cash at beginning of period

 
37.6

 
3.8

 
4.6

 
(1.4
)
 
44.6

Cash at end of period
$

 
$
68.8

 
$
4.1

 
$
12.3

 
$
(1.7
)
 
$
83.5

 
 

100

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements


 
Condensed Consolidating Statement of Cash Flows
Year Ended December 31, 2014
(in millions)
Parent
 
Issuer
 
Guarantor
Subsidiaries
 
Non-
Guarantor
Subsidiaries
 
Eliminations
 
Consolidated
Cash flows from operating activities
 
 
 
 
 
 
 
 
 
 
 
Net cash provided by operating activities
$
3.3

 
$
43.1

 
$
22.1

 
$
0.6

 
$
(4.6
)
 
$
64.5

Cash flows from investing activities
 
 
 
 
 
 
 
 
 
 
 
Capital expenditures

 
(0.1
)
 
(23.1
)
 
(0.2
)
 

 
(23.4
)
Proceeds from sale of property, plant and equipment

 

 
1.1

 

 

 
1.1

Net cash used in investing activities

 
(0.1
)
 
(22.0
)
 
(0.2
)
 

 
(22.3
)
Cash flows from financing activities
 
 
 
 
 
 
 
 
 
 
 
Borrowings on ABL Facility

 
248.4

 

 

 

 
248.4

Payments on ABL Facility

 
(253.9
)
 

 

 

 
(253.9
)
Principal payments under capital lease obligation

 

 
(0.2
)
 

 

 
(0.2
)
Dividends paid
(3.2
)
 
(3.2
)
 

 

 
3.2

 
(3.2
)
Proceeds from exercise of stock options
0.1

 

 

 

 

 
0.1

Excess tax benefit from share-based compensation
0.2

 

 

 

 

 
0.2

Share repurchases
(0.4
)
 


 


 


 

 
(0.4
)
Net cash used in financing activities
(3.3
)
 
(8.7
)
 
(0.2
)
 

 
3.2

 
(9.0
)
Effect of foreign currency exchange rates

 

 

 
0.6

 

 
0.6

Net increase (decrease) in cash

 
34.3

 
(0.1
)
 
1.0

 
(1.4
)
 
33.8

Cash at beginning of period

 
3.3

 
3.9

 
3.6

 

 
10.8

Cash at end of period
$

 
$
37.6

 
$
3.8

 
$
4.6

 
$
(1.4
)
 
$
44.6


101

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements


 
Condensed Consolidating Statement of Cash Flows
Year Ended December 31, 2013
(in millions)
Parent
 
Issuer
 
Guarantor
Subsidiaries
 
Non-
Guarantor
Subsidiaries
 
Eliminations
 
Consolidated
Cash flows from operating activities
 
 
 
 
 
 
 
 
 
 
 
Net cash provided by (used in) operating activities
$
0.8

 
$
(0.2
)
 
$
29.7

 
$
0.4

 
$
(2.7
)
 
$
28.0

Cash flows from investing activities
 
 
 
 
 
 
 
 
 
 
 
Capital expenditures

 
(0.1
)
 
(26.0
)
 
(0.1
)
 

 
(26.2
)
Payable to / receivable from subsidiaries
(4.9
)
 
4.9

 

 

 

 

Proceeds from sale of property, plant, and equipment

 

 
0.2

 

 

 
0.2

Net cash provided by (used in) investing activities
(4.9
)
 
4.8

 
(25.8
)
 
(0.1
)
 

 
(26.0
)
Cash flows from financing activities
 
 
 
 
 
 
 
 
 
 
 
Borrowings on ABL Facility

 
420.8

 

 

 

 
420.8

Payments on ABL Facility

 
(429.8
)
 

 

 

 
(429.8
)
Dividends paid
(0.8
)
 
(0.8
)
 

 
(2.0
)
 
2.8

 
(0.8
)
Net payment from stockholder
4.9

 

 

 

 

 
4.9

Net cash provided by (used in) financing activities
4.1

 
(9.8
)
 

 
(2.0
)
 
2.8

 
(4.9
)
Effect of foreign currency exchange rates

 

 

 
(0.2
)
 

 
(0.2
)
Net increase (decrease) in cash

 
(5.2
)
 
3.9

 
(1.9
)
 
0.1

 
(3.1
)
Cash at beginning of period

 
8.5

 

 
5.5

 
(0.1
)
 
13.9

Cash at end of period
$

 
$
3.3

 
$
3.9

 
$
3.6

 
$

 
$
10.8


102

Table of Contents

Global Brass and Copper Holdings, Inc.
Notes to Consolidated Financial Statements


19. Quarterly Financial Information (Unaudited)

2015
 
(in millions, except per share data)
First
Quarter
 
Second
Quarter
 
Third
Quarter
 
Fourth
Quarter
 
Net sales
$
400.2

 
$
414.9

  
$
367.7

 
$
323.4

  
Gross profit
43.9

(a)
50.3

(a)
42.6

(a)
33.5

(a)
Income before provision for income taxes and equity income
12.4

 
25.0

  
10.3

(b)
3.7

(b)
Net income
8.1

 
17.2

  
7.0

 
3.5

 
Net income attributable to Global Brass and Copper Holdings, Inc.
8.1

 
17.1

  
6.9

 
3.5

 
Net income attributable to Global Brass and Copper Holdings, Inc. per common share:
 
 
 
 
 
 
 
 
Basic
0.38

 
0.80

  
0.32

 
0.16

  
Diluted
0.38

 
0.80

  
0.32

 
0.16

  
 
2014
 
(in millions, except per share data)
First
Quarter
 
Second
Quarter
 
Third
Quarter
 
Fourth
Quarter
 
Net sales
$
443.8

 
$
440.5

  
$
436.8

 
$
390.3

  
Gross profit
43.6

(c)
44.2

(c)
44.6

 
32.2

(c)
Income before provision for income taxes and equity income
14.8

 
14.4

  
15.7

 
2.7

  
Net income
9.8

 
9.1

  
10.3

 
2.9

  
Net income attributable to Global Brass and Copper Holdings, Inc.
9.7

 
9.0

  
10.2

 
2.8

  
Net income attributable to Global Brass and Copper Holdings, Inc. per common share:
 
 
 
 
 
 
 
 
Basic
0.46

 
0.42

  
0.48

 
0.13

  
Diluted
0.46

 
0.42

  
0.48

 
0.13

  
(a)
Includes $1.9 million, $0.6 million, $2.3 million and $1.8 million non-cash lower of cost or market charges for the write down of domestic, non-copper metal inventory in the first, second, third and fourth quarters, respectively. Includes $0.1 million loss from liquidation of LIFO inventory layers in the fourth quarter.
(b)
Includes $2.3 million and $0.8 million loss from extinguishment of debt in the third and fourth quarters, respectively.
(c)
Includes $0.1 million and $0.1 million non-cash lower of cost or market charges for the write down of domestic, non-copper metal inventory in the first and second quarters, respectively. Includes $0.6 million loss from liquidation of LIFO inventory layers in the fourth quarter.
Basic and diluted EPS are computed independently for each of the periods presented. Accordingly, the sum of the quarterly EPS amounts may not equal the total for the year.
20. Subsequent Events
Subsequent to December 31, 2015, we purchased Senior Secured Notes in the open market. See further discussion in Note 11, “Financing.”


103

Table of Contents

Schedule I—Condensed Financial Information of Registrant
Global Brass and Copper Holdings, Inc. (Parent Company Only)
Condensed Balance Sheets
 
As of December 31,
(in millions, except share and par value data)
2015
 
2014
Assets
 
 
 
Current assets:
 
 
 
Cash
$

 
$

Total current assets

 

Investment in subsidiary
65.4

 
29.8

Total assets
$
65.4

 
$
29.8

Liabilities and stockholders’ equity
 
 
 
Current liabilities:
 
 
 
Accounts payable
$

 
$

Total current liabilities

 

Payable to subsidiary
9.0

 
8.2

Obligations and advances in excess of investment in subsidiary

 

Total liabilities
9.0

 
8.2

Stockholders’ equity:
 
 
 
Common stock - $0.01 par value; 80,000,000 shares authorized; 21,553,883 and 21,369,407 shares issued at December 31, 2015 and December 31, 2014, respectively
0.2

 
0.2

Additional paid-in capital
36.9

 
32.5

Retained earnings (accumulated deficit)
22.3

 
(10.1
)
Treasury stock - 46,729 and 29,200 shares at December 31, 2015 and December 31, 2014, respectively
(0.7
)
 
(0.4
)
Accumulated other comprehensive loss
(2.3
)
 
(0.6
)
Total stockholders’ equity
56.4

 
21.6

Total liabilities and stockholders’ equity
$
65.4

 
$
29.8

See accompanying notes to condensed financial information of registrant.

104

Table of Contents

Schedule I—Condensed Financial Information of Registrant
Global Brass and Copper Holdings, Inc. (Parent Company Only)
Condensed Statements of Operations
 
Year Ended December 31,
(in millions)
2015
 
2014
 
2013
Net sales
$

 
$

 
$

Cost of sales

 

 

Gross profit

 

 

Selling, general and administrative expenses
(1.2
)
 
(1.1
)
 
(5.9
)
Loss before income taxes and equity income
(1.2
)
 
(1.1
)
 
(5.9
)
Benefit from income taxes
0.4

 
0.5

 
2.3

Loss before equity income
(0.8
)
 
(0.6
)
 
(3.6
)
Equity income, net of tax
36.4

 
32.3

 
14.0

Net income
$
35.6

 
$
31.7

 
$
10.4

See accompanying notes to condensed financial information of registrant.

105

Table of Contents

Schedule I—Condensed Financial Information of Registrant
Global Brass and Copper Holdings, Inc. (Parent Company Only)
Condensed Statements of Comprehensive Income
 
Year Ended December 31,
(in millions)
2015
 
2014
 
2013
Net income
$
35.6

 
$
31.7

 
$
10.4

Other comprehensive loss:
 
 
 
 
 
Foreign currency translation adjustment, net of tax
(1.7
)
 
(1.1
)
 
(1.0
)
Comprehensive income
$
33.9

 
$
30.6

 
$
9.4

See accompanying notes to condensed financial information of registrant.

106

Table of Contents

Schedule I—Condensed Financial Information of Registrant
Global Brass and Copper Holdings, Inc. (Parent Company Only)
Condensed Statements of Cash Flows
 
Year Ended December 31,
(in millions)
2015
 
2014
 
2013
Net cash provided by operating activities
$
3.3

 
$
3.3

 
$
0.8

Cash flows from investing activities
 
 
 
 
 
Payable to subsidiary

 

 
(4.9
)
Net cash used in investing activities

 

 
(4.9
)
Cash flows from financing activities
 
 
 
 
 
Dividends paid
(3.2
)
 
(3.2
)
 
(0.8
)
Proceeds from exercise of stock options
0.1

 
0.1

 

Excess tax benefit from share-based compensation
0.1

 
0.2

 

Share repurchases
(0.3
)
 
(0.4
)
 

Net payment from stockholder

 

 
4.9

Net cash provided by (used in) financing activities
(3.3
)
 
(3.3
)
 
4.1

Net increase in cash

 

 

Cash at beginning of year

 

 

Cash at end of year
$

 
$

 
$

See accompanying notes to condensed financial information of registrant.

107

Table of Contents

Schedule I—Condensed Financial Information of Registrant
Global Brass and Copper Holdings, Inc. (Parent Company Only)
Notes to Condensed Financial Information of Registrant
December 31, 2015
1.    Basis of Presentation
Global Brass and Copper, Inc. (“GBC”) is a direct subsidiary of Global Brass and Copper Holdings, Inc. (the “Company”). Under the terms of the agreements governing the 9.50% Senior Secured Notes (“Senior Secured Notes”) issued by GBC and the asset-based revolving loan facility entered into by GBC and certain of its subsidiaries (the “ABL Facility”), GBC and substantially all of its existing and future 100%-owned U.S. subsidiaries are significantly restricted from making dividend payments, loans or advances to the Company. These restrictions have resulted in the restricted net assets (as defined in Rule 4-08(e)(3) of Regulation S-X) of the Company’s subsidiaries exceeding 25% of the consolidated net assets of the Company and its subsidiaries. These condensed financial statements should be read in conjunction with the consolidated financial statements and related notes thereto included in this filing.

2.    Guarantees
The Senior Secured Notes and the ABL Facility are guaranteed by the Company and substantially all of GBC’s existing and future 100%-owned U.S. subsidiaries. The Senior Secured Notes, the ABL Facility and the related guarantees are secured by the fixed assets, accounts receivable and inventory of GBC and GBC’s existing and future 100%-owned U.S. subsidiaries.

3.    Distributions from Subsidiary
Cash distributions received by the Company from GBC were $3.2 million, $3.2 million and $0.8 million for 2015, 2014 and 2013, respectively. The amounts received in these years represented a return on capital.


108

Table of Contents

Item 9. Changes in and Disagreements With Accountants on Accounting and Financial Disclosure.
None.

Item 9A. Controls and Procedures
Evaluation of Disclosure Controls and Procedures
Management of a reporting company, with the participation of the principal executive officer and principal financial officer, must periodically evaluate the Company’s “disclosure controls and procedures” as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (“Exchange Act”). Disclosure controls and procedures are defined as controls and other procedures of a reporting company that are designed to ensure that information required to be disclosed by the reporting company in its reports filed or submitted to the SEC under the Exchange Act (such as this Form 10-K) is (i) recorded, processed, summarized, and reported in the time periods specified in the SEC’s rules and forms, and (ii) accumulated and communicated to management, including its principal executive officer and principal financial officer, as appropriate, to allow timely decisions regarding required disclosures.
The Company’s management, with the participation of the Chief Executive Officer and the Chief Financial Officer, carried out an evaluation of the effectiveness of the design and operation of the Company’s disclosure controls and procedures as of December 31, 2015. Management recognizes that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving their objectives and management necessarily applies its judgment in evaluating the cost benefit relationship of possible controls and procedures. Based on this evaluation, our Chief Executive Officer and Chief Financial Officer concluded that, as of December 31, 2015, the design and operation of our disclosure controls and procedures were effective to provide reasonable assurance that the desired control objectives were achieved.
Management’s Annual Report on Internal Control Over Financial Reporting
Our management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Exchange Act Rules 13a-15(f) and 15d-15(f). Our internal control over financial reporting is designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. Management assessed the design and effectiveness of the Company’s internal control over financial reporting as of December 31, 2015. In making this assessment, management used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”) in Internal Control—Integrated Framework (2013 framework). Based on this evaluation, management concluded that our internal control over financial reporting was effective as of December 31, 2015 based on criteria in Internal Control –Integrated Framework issued by the COSO. The effectiveness of our internal control over financial reporting as of December 31, 2015 has been audited by PricewaterhouseCoopers LLP, an independent registered public accounting firm, as stated in their report which appears under Item 8 of this Annual Report on Form 10-K.
Changes in internal controls
There have been no changes in our internal control over financial reporting (as such term is defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act) during the quarter ended December 31, 2015 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.
Item 9B. Other Information.
None.

109

Table of Contents

PART III
Item 10. Directors, Executive Officers and Corporate Governance.
Management
Information regarding our management and directors, included under the heading “Directors, Executive Officers and Corporate Governance,” is incorporated by reference herein from our 2016 proxy statement to be filed with the SEC not later than 120 days after the end of our fiscal year ended December 31, 2015.
Audit Committee
Information with respect to the Audit Committee and Audit Committee financial experts, included under the heading “Audit Committee” in the Proxy Statement, is incorporated by reference herein from our 2016 proxy statement to be filed with the SEC not later than 120 days after the end of our fiscal year ended December 31, 2015.
Section 16(a) Beneficial Ownership Reporting Compliance
Information regarding Section 16(a) compliance, included under the heading “Section 16(a) Beneficial Ownership Reporting Compliance” in the Proxy Statement, is incorporated by reference herein from our 2016 proxy statement to be filed with the SEC not later than 120 days after the end of our fiscal year ended December 31, 2015.
Codes of Conduct
The Board has adopted a Code of Business Conduct and Ethics, which applies to all employees, including our executive officers (which includes our Principal Executive Officer, our Principal Financial Officer and our Principal Accounting Officer). Our Code of Business Conduct and Ethics can be found on our website at http://www.gbcmetals.com. We will post any amendment to or waiver from the provisions of the Code of Business Conduct and Ethics that applies to the executive officers above on the same website and will provide it to shareholders free of charge upon written request by contacting Global Brass and Copper Holdings, Inc. at 475 N. Martingale Road, Suite 1050, Schaumburg, IL 60173, Attention: Investor Relations.
Item 11. Executive Compensation.
Information with respect to compensation of our executive officers and directors, included under the headings “Compensation Discussion and Analysis,” “Executive Compensation,” “Compensation Committee Interlocks and Insider Participation” and “Compensation Committee Report” in the Proxy Statement, is incorporated by reference herein from our 2016 proxy statement to be filed with the SEC not later than 120 days after the end of our fiscal year ended December 31, 2015.
Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters.
Information with respect to security ownership of certain beneficial owners and management, included under the heading “Security Ownership of Certain Beneficial Owners, Directors and Management” in the Proxy Statement, is incorporated by reference herein from our 2016 proxy statement to be filed with the SEC not later than 120 days after the end of our fiscal year ended December 31, 2015. Information with respect to securities authorized for issuance under equity compensation plans, included under the heading “Equity Compensation Plan Information Table” in the Proxy Statement, is incorporated by reference herein from our 2016 proxy statement to be filed with the SEC not later than 120 days after the end of our fiscal year ended December 31, 2015.

110

Table of Contents

Item 13. Certain Relationships and Related Transactions, and Director Independence.
Information regarding certain relationships and related transactions, and director independence, included under the heading, “Certain Relationships and Related Party Transactions” in the Proxy Statement, is incorporated by reference herein from our 2016 proxy statement to be filed with the SEC not later than 120 days after the end of our fiscal year ended December 31, 2015.
Item 14. Principal Accounting Fees and Services.
Information with respect to principal accounting fees and services, included under the heading “Fees of Independent Accountants” in the Proxy Statement, is incorporated by reference herein from our 2016 proxy statement to be filed with the SEC not later than 120 days after the end of our fiscal year ended December 31, 2015.

111

Table of Contents

PART IV

Item 15. Exhibits, Financial Statement Schedules.
(a)
Financial Statement Schedules
The following documents are filed as part of this Annual Report on Form 10-K:
1.
Financial Statements: the report of independent registered public accounting firm, financial statements, notes, and financial statements schedule are contained in Item 8 of this Annual Report.
(b)
Other than with respect to Schedule I, which is contained in Item 8 of this Annual Report, financial statement schedules are omitted because they are not applicable or the required information is presented in the financial statements or related notes.
(c)
Exhibits
Exhibit
Number
  
Description
2.1*
  
Purchase Agreement, between Global Brass and Copper Acquisition Co. and Olin Corporation, dated as of October 15, 2007.
 
 
 
3.1****
  
Amended and Restated Certificate of Incorporation of Global Brass and Copper Holdings, Inc.
 
 
 
3.2*********
  
Amended and Restated Bylaws of Global Brass and Copper Holdings, Inc.
 
 
 
4.1****
  
Form of Certificate of Common Stock of Global Brass and Copper Holdings, Inc.
 
 
 
4.2***
  
Indenture, by and among Global Brass and Copper, Inc., Wells Fargo Bank, National Association, and the Guarantors named therein, dated June 1, 2012.
 
 
 
10.1****
  
Global Brass and Copper Holdings, Inc. 2013 Omnibus Equity Incentive Plan.
 
 
 
10.2**
  
Severance Agreement, by and between John J. Wasz and Global Brass and Copper, Inc., dated August 31, 2011.
 
 
 
10.3******
  
Employment Agreement between Global Brass and Copper, Inc. and John J. Wasz, dated May 8, 2014
 
 
 
10.4*******
  
Severance Agreement, by and between Robert T. Micchelli and Global Brass and Copper, Inc., dated March 17, 2014.
 
 
 
10.5*
  
Severance Agreement, by and between Devin K. Denner and Global Brass and Copper, Inc., dated July 29, 2011.
 
 
 
10.6**
  
Amendment No. 1 to Severance Agreement, by and between Devin K. Denner and Global Brass and Copper, Inc., dated February 9, 2012.
 
 
 
10.7**********
  
Severance Agreement, by and between Scott B. Hamilton and Global Brass and Copper, Inc., dated October 10, 2011.
 
 
 
10.8**********
  
Severance Agreement, by and between Kevin W. Bense and Global Brass and Copper, Inc., dated September 20, 2013.
 
 
 
10.9**********
  
Severance Agreement, by and between William G. Toler and Global Brass and Copper, Inc., dated September 9, 2013.
 
 
 
10.10***
  
Amended and Restated Loan and Security Agreement, by and among Global Brass and Copper, Inc., Chase Brass and Copper Company, LLC, GBC Metals, LLC, Chase Brass, LLC, A.J. Oster, LLC, Global Brass and Copper Holdings, Inc., other guarantors, and Wells Fargo Bank, National Association and other lenders, dated August 18, 2010.
 
 
 
10.11***
  
Amendment No. 1 to Amended and Restated Loan and Security Agreement and Waiver, by and among Global Brass and Copper, Inc., Chase Brass and Copper Company, LLC, GBC Metals, LLC, Chase Brass, LLC, A.J. Oster, LLC, Global Brass and Copper Holdings, Inc., other guarantors, and Wells Fargo Bank, National Association and other lenders, dated May 13, 2011.
 
 
 

112

Table of Contents

Exhibit
Number
  
Description
10.12***
  
Amendment No. 2 to Amended and Restated Loan and Security Agreement, by and among Global Brass and Copper, Inc., Chase Brass and Copper Company, LLC, GBC Metals, LLC, Chase Brass, LLC, A.J. Oster, LLC, Global Brass and Copper Holdings, Inc., other guarantors, and Wells Fargo Bank, National Association and other lenders, dated October 26, 2011.
 
 
 
10.13***
  
Amendment No. 3 to Amended and Restated Loan and Security Agreement, by and among Global Brass and Copper, Inc., Chase Brass and Copper Company, LLC, GBC Metals, LLC, Chase Brass, LLC, A.J. Oster, LLC, Global Brass and Copper Holdings, Inc., other guarantors, and Wells Fargo Bank, National Association and other lenders, dated June 1, 2012.
 
 
 
10.14***
  
Senior Lien Intercreditor Agreement, among Wells Fargo Bank, National Association, Global Brass and Copper, Inc., Global Brass and Copper Holdings, Inc., and the Subsidiaries of Global Brass and Copper Holdings, Inc. named therein dated as of June 1, 2012.
 
 
 
10.15***
  
Indenture, by and among Global Brass and Copper, Inc., Wells Fargo Bank, National Association, and the Guarantors named therein, dated June 1, 2012.
 
 
 
10.16***
  
Exchange and Registration Rights Agreement, by and among Global Brass and Copper, Inc., Goldman, Sachs & Co. and Morgan Stanley & Co. LLC, dated June 1, 2012.
 
 
 
10.17***
  
Pledge and Security Agreement, between each guarantor party thereto and Wells Fargo Bank, National Association, dated as of June 1, 2012.
 
 
 
10.18*
  
Indenture of Lease, between The Lares Group II and A.J. Oster Company, dated March 1, 1995, as amended.
 
 
 
10.19*
  
Single Tenant Lease, between La Palmea Flex, L.P. and A.J. Oster West LLC, dated February 1, 2009.
 
 
 
10.20****
  
Form of Indemnity Agreement.
 
 
 
10.21*****
  
Investor Rights Agreement, dated as of May 29, 2013, by and between Global Brass and Copper Holdings, Inc. and Halkos Holdings, LLC.
 
 
 
^10.22********
  
Form of Performance Share Award Agreement under the Global Brass and Copper Holdings, Inc. 2013 Omnibus Equity Incentive Plan
 
 
 
^10.23********
  
Form of Nonqualified Option Award Agreement under the Global Brass and Copper Holdings, Inc. 2013 Omnibus Equity Incentive Plan
 
 
 
^10.24********
  
Form of Employee Restricted Stock Award Agreement under the Global Brass and Copper Holdings, Inc. 2013 Omnibus Equity Incentive Plan
 
 
 
^10.25********
  
Form of Director Restricted Stock Award Agreement under the Global Brass and Copper Holdings, Inc. 2013 Omnibus Equity Incentive Plan
 
 
 
12.1
  
Computation of Ratio of Earnings to Fixed Charges.
 
 
 
21.1
  
List of Subsidiaries of Global Brass and Copper Holdings, Inc.
 
 
 
23.1
  
Consent of PricewaterhouseCoopers LLP.
 
 
 
31.1
  
Certification of Chief Executive Officer under Section 302 of the Sarbanes-Oxley Act of 2002.
 
 
 
31.2
  
Certification of Chief Financial Officer under Section 302 of the Sarbanes-Oxley Act of 2002.
 
 
 
32.1†
  
Certification of Chief Executive Officer and Chief Financial Officer under Section 906 of the Sarbanes-Oxley Act of 2002.
 
 
 
101.INS
  
XBRL Instance Document.
 
 
 
101.SCH
  
XBRL Taxonomy Extension Schema.
 
 
 
101.CAL
  
XBRL Taxonomy Extension Calculation Linkbase.
 
 
 
101.DEF
  
XBRL Taxonomy Extension Definition Linkbase.
 
 
 
101.LAB
  
XBRL Taxonomy Extension Label Linkbase.
 
 
 
101.PRE
  
XBRL Taxonomy Extension Presentation Linkbase.

113

Table of Contents

 
*
Filed with Amendment No. 1 to Form S-1 (No. 333-177594) of Global Brass and Copper Holdings, Inc. on January 6, 2012 and incorporated by reference herein.
**
Filed with Amendment No. 2 to Form S-1 (No. 333-177594) of Global Brass and Copper Holdings, Inc. on February 10, 2012 and incorporated by reference herein.
***
Filed with Amendment No. 3 to Form S-1 (No. 333-177594) of Global Brass and Copper Holdings, Inc. on September 18, 2013 and incorporated by reference herein.
****
Filed with Amendment No. 6 to Form S-1 (No. 333-177594) of Global Brass and Copper Holdings, Inc. on May 8, 2013 and incorporated by reference herein.
*****
Filed on Form 8-K of Global Brass and Copper Holdings, Inc. on May 29, 2013 and incorporated by reference herein.
******
Filed on Form 8-K of Global Brass and Copper Holdings, Inc. on May 14, 2014 and incorporated by reference herein.
*******
Filed on Form 8-K of Global Brass and Copper Holdings, Inc. on March 19, 2014 and incorporated by reference herein.
********
Filed on Form 10-K of Global Brass and Copper Holdings, Inc. on March 19, 2014 and incorporated by reference herein.
*********
Filed on Form 8-K of Global Brass and Copper Holdings, Inc. on March 10, 2015 and incorporated by reference herein.
**********
Filed on Form 10-K of Global Brass and Copper Holdings, Inc. on March 16, 2015 and incorporated by reference herein.
^
Compensatory plan or arrangement
This certification is deemed not filed for purposes of section 18 of the Securities Exchange Act of 1934, as amended (Exchange Act), or otherwise subject to the liability of that section, nor shall it be deemed incorporated by reference into any filing under the Securities Act of 1933, as amended (Securities Act) or the Exchange Act.


114

Table of Contents

SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
 
 
 
 
GLOBAL BRASS AND COPPER HOLDINGS, INC
 
 
By:
 
/s/ Robert T. Micchelli
 
 
Robert T. Micchelli
 
 
Chief Financial Officer
Date: March 9, 2016
Pursuant to the requirements of the Securities Exchange Act of 1934, this Report has been signed below by the following persons on behalf of Global Brass and Copper Holdings, Inc. and in the capacities indicated on March 9, 2016.
 
Name
 
 
 
Position
 
 
 
/s/ John J. Wasz
 
 
 
Chief Executive Officer and President
(principal executive officer) and Director
John J. Wasz
 
 
 
 
 
 
 
/s/ Robert T. Micchelli
 
 
 
Chief Financial Officer (principal financial officer and principal accounting officer)
Robert T. Micchelli
 
 
 
 
 
 
 
/s/ John H. Walker
 
 
 
Chairman of the Board
John H. Walker
 
 
 
 
 
 
 
/s/ Vicki L. Avril
 
 
 
Director
Vicki L. Avril
 
 
 
 
 
 
 
/s/ Donald L. Marsh
 
 
 
Director
Donald L. Marsh
 
 
 
 
 
 
 
/s/ Bradford T. Ray
 
 
 
Director
Bradford T. Ray
 
 
 
 
 
 
 
/s/ Martin E. Welch, III
 
 
 
Director
Martin E. Welch, III
 
 
 
 
 
 
 
/s/ Ronald C. Whitaker
 
 
 
Director
Ronald C. Whitaker
 
 
 
 


115